Metal Powder, Snail Mold, Aqua Cast: Is There Slime?

Let's Resin recently released a wonderful new silicone mold of a quite large snail (not as large as Dr. Doolittle once traveled in, but still...), and I couldn't wait to try it out! I really wanted to start with epoxy resin, but since Aqua Cast actually sets up, cures and can be demolded much faster, I started there, plus I tossed in some chromeleon micas and metallic powder. A chrome pen even got involved. The biggest hurdle -- once again -- trying to achieve a good Black with Aqua Cast. Let's just say the colorant gods laughed and laughed and laughed.
Anthony Crammen ‘s channel: / @anthonycrammen
Check out his Aqua Cast video here:
• The EASIEST Mould Maki...
If you're interested in resin tumbler making, check out my other channel:
/ luxindaswirl
Check out some of the items I've made, listed in my Etsy store:
www.etsy.com/shop/LuxindaSwirl
My Amazon Storefront*:
www.amazon.com/shop/luxindasw...
Amazon Prime credit card* (earns 5% rewards): www.amazon.com/dp/BT00LN946S?...
=====Ways to help and support my channel or any other KZbinr's channel=====
***Like a video, share a video, subscribe to the channel
***The Super Thanks button directly underneath the video (where the like 👍 is, then to the right -- look for the 🤍 with a $ in it) allows you to directly support your favorite KZbin Creators.
***www.buymeacoffee.com/LuxindaS...
MATERIALS USED IN THIS VIDEO*:
Aqua Cast (in the US): bit.ly/3P80T7X
Aqua Cast (in the UK): bit.ly/3EnkIVf
Chameleon micas: 10% discount on most items use code "Luxinda": bit.ly/3smNkHd
Snail mold: amzn.to/3iyIe9h
Silver powder: amzn.to/3QwI9Qb
Chrome pen: amzn.to/3X1CXGt
Brusho crystals: amzn.to/3Bln9pc
Black Liquitex paint: amzn.to/3CE72n7
Scale: amzn.to/3W6sDLY
Loctite super glue: amzn.to/3Xis6ri
Mold release: amzn.to/3Z3BLDK
==Other Materials I love*:
KS Resin Liquid Stone Ultra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
ZURI silicone molds: bit.ly/3w84kSZ
FOILS: bit.ly/3o4AwDJ (10% discount code: Luxinda)
Hiipoo sublimation paper: bit.ly/3quMCaR 10% discount "LUXSWIRL"
Hiipoo waterslide paper: bit.ly/3quMCaR 10% discount "LUXSWIRL"
Woodes Goodies, 10% discount on most items use code "Luxinda":
www.woodesgoodies.com/
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
#Aquacast #jesmonite #letsresin
Luxinda (Cindy) Deskins
PO Box 974
Ranson, WV 25438-4974
** Efforts I Strongly Believe In **
Getting plastic out of our oceans -- teamseas.org/
Emergency food relief -- wck.org/
Music in this video:
Hammock Fight by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Laconic Granny by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@LuxindasOtherObsessions]

For anyone rushing down here to tell me that what I kept referring to as the snail’s antennae are really its eye stalks or tentacles, I AM AWARE. However, I decided I didn’t want to take the time to reshoot, re-edit, then re-upload this video. Instead, help me give this adorable snail a name!! 🐌🐌🐌

[@RaesTurquoiseTurtle]

I wouldn't have known 🤣

[@LuxindasOtherObsessions]

@@RaesTurquoiseTurtle I just figured someone would feel the need at some point 😁

[@raesreadsandrambles]

I just watched again from this channel I need to get the big mold I just got 2 super cute little snails yesterday I can't wait to play with 🐌

[@LuxindasOtherObsessions]

@@raesreadsandrambles this is definitely a fun mold!!! I don’t think I’d want to find a live snail this size in my garden, but as a cast item, it’s adorable 🥰

[@RaesTurquoiseTurtle]

Okay so I'm back again I just went down an anatomy of snails rabbit hole and they are in fact referred to as tentacles in everything I've seen some snails have 2 sets (this is what started me on this road my tiny molds have 2 pairs) the upper set has the eyes and lower set is for smelling and feeling.... all did you watch Julie? Pour hers yet she tilted the mold and poured in parts to keep the shell part at one complete style...

[@martivanhoy28]

He turned out so cute!! Even with the battle scars! That just gives him character! You should name him Herman.

[@LuxindasOtherObsessions]

Thanks!! Oh, I love that name! 🐌🐌🥰

[@milolaclover]

He is still wicked adorable!!!

[@LuxindasOtherObsessions]

Thanks - he is!!🥰🐌

[@cachejewels8532]

Watered down mushy wall spackling will fill cracks and bubbles. It needs to be watered down to a soft putty or it won't stick proper. Then it has to dry for 24 hours or it will pop off. I let mine dry for a few days, then once it's dry it's attached. I use elmers glue to glow on things like the antennas then after that's dry fill the cracks with spackling let it dry, then paint paint it. :) I use perfect cast, it's the same type of material as aqua cast and resincrete.

[@janbuckley1]

He’s fabulous! Love from the UK 💕

[@LuxindasOtherObsessions]

Thank you!!😊😊🐌

[@RaesTurquoiseTurtle]

So cute this molds been in my cart for a minute I've been watching a tiktoker who uses it daily and they are so cute she even does lights in it

[@LuxindasOtherObsessions]

Oh, I’ll bet - it really is adorable!

[@KellyBellcambridgegiftsbykelly]

Thank you for sharing. Personally I mix the color in my water then add the powder. I have had luck with a combination of ink acrylic paint and jacquard acid dye in powder form. Color concentration is still iffy but the color is beautiful. I've had my acid dyed for a couple of decades - probably still made but not sure.

[@mickkianderson6426]

Super cute

[@LuxindasOtherObsessions]

Thank you!!😊😊

[@cathysarthub8306]

Cement colorants are great

[@LuxindasOtherObsessions]

Thank you! Yes, I finally got some black colorant made especially for concrete and plaster, so I’m very hopeful it’ll work well in Aqua Cast 🤞🖤

[@bonniebrewer434]

Just a suggestion. But have you ever tried adding powered color to the dry mix before adding it to the water?

[@LuxindasOtherObsessions]

I haven’t - I can’t think that it would make a difference, but I can certainly give it a shot. Thanks!

[@wtglb]

I wonder if Black Alumalite Dye would do the trick, it’s highly-concentrated and used for resin and clothes-dyeing

[@LuxindasOtherObsessions]

My guess is it wouldn’t be any better than the other two concentrated black resin dyes I’ve tried that did nothing. But I haven’t tried it yet so 🤷‍♀️ maybe I’m jumping to an unfair conclusion 😁

[@wtglb]

@@LuxindasOtherObsessions you are probably right, it was just a thought.

[@Luxinda]

@@wtglb oh, it's a great thought! I just have to decide how much more time and money I want to invest in this one thing, that's all 😊😊

[@wtglb]

@@Luxinda Oh I hear that, lol!!!!

[@patriciamnosselliott1893]

Gary! His name should be Gary. I think he looks great.

[@LuxindasOtherObsessions]

Oh, Gary’s a great name for him!! 🐌🥰

[@franlats0705]

Please tell me you watch spongebob

[@winonataylor9978]

First name that came to mind was Gary like the snail from SpongeBob. Maybe go over him with some black crackle paint and make it look like he was just made that way?

[@LuxindasOtherObsessions]

Thanks!! Great name 😁🐌

[@darialacy2151]

If you can use any amount of water, can you add more water when using the acrylic paint?

[@LuxindasOtherObsessions]

Yes! The problem is that it doesn’t make any difference (or it didn’t for me), so I didn’t even bother with that in this video. In a previous video, when I first tried acrylic paint to get a decent black and it started thickening up so quickly, I added more water because that seemed so obvious (and is a huge advantage of Aqua Cast), but the mixture didn’t loosen up at all - the additional water wouldn’t even mix in. Very weird, especially since any water-based colorant (which includes acrylic paint) is supposed to be fine in Aqua Cast. It did occur to me that I’ve used only the one Liquitex Basics brand so far, so maybe I need to get some other black acrylic paints and do a test with those.

[@darialacy2151]

@@LuxindasOtherObsessions That is weird. Testing another brand of acrylic paint seems like an obvious trial. I also wonder if putting more water in in the first place, since you know you want black black would be of any use. I haven't yet tried Aqua Cast or any of the similar... so am watching your videos with great curiosity. Solid dark colors would seem to be one of the things one would want, and fighting a normally white product seems a challenge. But I do like the look of some of the things you and others have done. Somehow, I trust your evaluations more than some of the others. You do try every which way with products. I love it!!!! LOL! Can't say our tastes always run the same gamut (not fond of skulls for instance), but you do make learning so much fun! Like you, I like so many different crafts. Unlike you, I don't have the discipline to stay with only a couple of venues. My current... wire wrap jewelry... but still keep up with your vids... to inspire me back to resin, etc. :)

[@sherylmccloud385]

Bruce

[@LuxindasOtherObsessions]

Love it!! 😁🐌