To me, this is like relaxation therapy. I could watch this process all day, lol. Subscribed.
@hydraulichands Жыл бұрын
To me, this is like relaxation therapy. I could Read this comment all day, lol. Thanks. 😉
@casanova521827 күн бұрын
😂😂😂😂👏👍
@ericashmusic8889 Жыл бұрын
This machine is a Webster & Bennett, as an apprentice I worked on an almost Identical machine for 18 months, 5 days a week + saturday mornings...on rings of steel that weighed 1- 1/4 cwt. I still remember the smell & noise over 60 years later.
@hydraulichands Жыл бұрын
Yep, its totally personal choice
@adifmuhammad34411 ай бұрын
😮😮😮😮😮😮😮😮😮😮
@bobdexter102910 ай бұрын
I bet you had boots on and your salary wasn't 3 chickens a week.
@MaloneMantooth10 ай бұрын
@@bobdexter1029: Lol
@bobross558020 күн бұрын
@@bobdexter1029 probably got more Goose eggs than chickens..
@renetr677111 ай бұрын
I love the blue wires you manufacture in every of your videos :) But i also have great respect for what u are doing with that old equipment!
@keshkumar785110 ай бұрын
I thought that my job working in a restaurant/bar was really hard, but watching you fine gentleman, do your work you have made me realise my job is nothing but easy compared to yours. You guys work so hard and hand have done an excellent job. Congratulations well done on your hard work and greetings from India.
@nobuckle40 Жыл бұрын
I don't care where its made, it takes a great deal of skill to machine parts on this scale. Especially using equipment this old. Very impressive.
@AsifKhan-pk1km Жыл бұрын
Such woders only happen in Pakistan. That is how they are nuclear.
@Kenneth_James Жыл бұрын
No it really doesn't
@sawaab.a3756 Жыл бұрын
@@Kenneth_James to be precision i would say it does plus the man power needed must be crazy
@suleymantombul1672 Жыл бұрын
Bu DİŞLİ NE İÇİN YAPILDI NERDE KULLANILIR
@captaincoffeecake3595 Жыл бұрын
A incredibly large amount of factory large machines are made pre 1960 . They just get serviced and upgraded when needed.
@user-oh8rh6px8e10 ай бұрын
Old time modernisation!!!Simple but beyond someone’s thoughts!!!So great!!. It would be fascinating to get stats on work injuries..
@rusticagenerica2 ай бұрын
Passionate people doing real work. Well done guys !
@puropapas Жыл бұрын
Love how you can go to work in your pajamas and slippers! Watch out for the toes, easy to loose them!
@montyzumazoom1337 Жыл бұрын
Good old Webster and Bennett machine. I'd say these guys are pretty skilled. It's not what you've got its what you do with it (as the actress said to the arch bishop!). Loved the way the guy marked it out with chalk, I remember doing similar when machining castings years ago. Putting it on the gear hobber and supporting the base with jacks made of nuts and bolts (been there, done that), using old components as clamping washers....Yes these guys know what they are doing alright. Where there's a will is a way. Goodness knows what these gears sound like when running, but these guys are very good at getting by and making the best of what they have available.
@hydraulichands Жыл бұрын
Thanks for sharing your point of view, glad to hear that.😊 😇
@user-ij4cq6yg5v11 ай бұрын
Да пацаны вообще ребята)))
@stoopidpaki480610 ай бұрын
In Pakistan we have to make to do with what we have. One day we will get new technology but for now we must rely on our skills.
@faustinoflores59548 ай бұрын
Felicitaciones son unos maestros y que hermosa maquinaria
@boredCoy7 ай бұрын
even 19th century likely had far better worker conditions.....
@antoniomora8487 Жыл бұрын
Mis respetos para estos señores con la experiencia que hacen estos trabajos de mucha precisión y lo grande de las piezas que fabrican. Saludos desde Cúcuta Colombia bendiciones 👍👍⭐⭐⭐⭐⭐😎📐🔧🔨
@hanbao8024 Жыл бұрын
0j
@kevinmoore34210 ай бұрын
You men are just amazing to watch work. Can’t thank you enough for sharing.
@hydraulichands10 ай бұрын
Glad you liked
@refiii9499 Жыл бұрын
I love watching the old VTL (vertical turning lathe) make such huge chips. Those old W&B’s (Webster and Bennet) could really hog out the material so fast. Watching this is like a time machine back in the 20’s through the 50’s. Those old machines keep working after thousands of hours of use.
@spikeypineapple552 Жыл бұрын
MRR on this is a fraction of what you can do on modern slant bed lathe. There's no heavy cuts here at all.
@robertb3745 Жыл бұрын
😊
@robertb3745 Жыл бұрын
😊
@maruiacancer Жыл бұрын
Thank you so much for your videos! I had a misfortune, I was diagnosed with ovarian cancer. I also created a channel and am trying to move in that direction, but so far not very successful((lp
@bertharrison6485 Жыл бұрын
Photo shoot with
@socaladventuredad Жыл бұрын
Somewhere, there's an OSHA inspector having an aneurysm watching this.
@hydraulichands Жыл бұрын
😂 🤣
@MolloRelax3 ай бұрын
...And I hope he is watching it in the company of a 1000 others
@ElectricEnfield Жыл бұрын
In my Hometown 5 mins away in Duisburg (Germany), we have a Company making Industrial Gears, this size. The steps are pretty much the same. The machinery is like "Good old green and Heavy Duty", German Mechanics and Machinists known very well. Jobbed there as a Teenager a few Weeks.
@user-py9qi5xp8b10 ай бұрын
Old time modernisation!!!Simple but beyond someone’s thoughts!!!So great!!. Muito bom .
@plunder19564 ай бұрын
I visited a large gear turning shop in Sheffield about 10 years ago, which had several large horizontal lathes and milling stations for this kind of work. More sophisticated equipment in the main with CNC on some stations. It was fascinating. We wanted a replacement part made for an indexing unit used on our Bridgeport Mill. Once Sheffield was full of traditional places like this making and fixing parts for big machines, but it's harder to find them now. So many of the good machines were exported or scrapped when they closed down.
@tubester45673 ай бұрын
Yep, I dont know what is "smarter than others". This all looks like very old technology from 18th century. The guy welding without a mask is not good. I give them credit for being hard workers. The bosses are exploiting most of these people.
@MarcinKryszak Жыл бұрын
I'm impressed with the product, considering the equipment, no carbide tools or even compressed air .
@thepubliceye Жыл бұрын
They used carbide tip tools, you just thought all carbide tools have bolt on inserts. These guys are tool makers as well as machinists.
@gwharton68 Жыл бұрын
Always enjoyable, Those guys sure don't have to worry about what they wear to work.
@hydraulichands Жыл бұрын
Glad you enjoyed it
@microcolonel Жыл бұрын
It'd be nice to have a welding mask though lol.
@user-wv5fq8di2m3 ай бұрын
Very satisfying to watch. Perfection.
@helionicaretta5623 Жыл бұрын
Parabens trabalhei por muitos anos acompanhando esse tipo de usinagem do inicio ao fim do processo belo trabalho
@jenswesterburg188 ай бұрын
Schrottplatz .... ?
@Vision_Of_Realities10 ай бұрын
Old time modernisation!!! Simple but beyond someone’s thoughts!!! So great!!🌺
@sammyjones350011 ай бұрын
Top site, love these old machines.
@chrisretusn Жыл бұрын
Impressive. I was thinking, hope he shows how they lined up the blank gear. You did! Thanks.
@hydraulichands Жыл бұрын
Glad it was helpful!
@topduk Жыл бұрын
Ah, but how did they line up the other side of the hobbed gear? Probably by marking it in the first place, but we'll never know.
@redryderaus Жыл бұрын
@@hydraulichands He was being sarcastic. I'm tipping the two gears are a long way out of alignment "It looks good so it must be right, engineering and measurement doesn't matter"
@Vassilika1 Жыл бұрын
At least you guys are not wearing flip flops, but proper sandals. 🙂 Great Job!
@hydraulichands Жыл бұрын
😁
@lelandcox40898 ай бұрын
I did repair work ar the Mobile Pulley Works in Mobile Alabama. They had a horizontal lathe there If I remembrty correctly it could turn something 24 Ft accross. I heard something one day and followed the sound. That lathe had a tool set up on 2 sides and they were cutting off about a 1/2 inch curl on both of them. Mobile Pully made discharge pipe and fittings for the dredge industry and huge swivel joints that had to be machined Always enjoyed working there!
@jimrichardson8575 Жыл бұрын
Amazing skills, and using equipment used in the 1950's !! My compliments to these artisans.
@zareegoraya152811 ай бұрын
😊😊
@drscopeify11 ай бұрын
@@crispindry2815 They are Artisans they are using their Skills to make an object that did not exist before, from a painting to music to machine parts it's the same principle. Using your skills to make something you put your mind and soul in to.
@heroinwithease10 ай бұрын
@@drscopeify stop smoking hard food
@GK-sh7ck5 ай бұрын
@@heroinwitheaseAre you on something mate?
@janshah110 ай бұрын
اسلام وعلیکم. بھائی آپ نے کسی ایک کو بھی نہ تو سفٹی شوز اور نہ ہی سفٹی ھلمٹ دیا ھوا ھے. ماشاءاللہ اتنی بڑی ورکشاپ ھے. آپ کو چاہیے سفٹی فرسٹ. شکریہ
@elcamman50 Жыл бұрын
Now we know where all the old, heavy machinery went to from North America and Europe. These workers are amazing. I am also sure that when the industrial revolution first started in North America and Europe, safety was not a major concern of the owners towards their workers. Hopefully, these places will eventually progress as we did.
@peterkonitzer4410 Жыл бұрын
Went there from England when English were there....
@balisharif1742 Жыл бұрын
safety apparatus comes with lots of money. and we all know how North America and Europe got the money...stealing whole continents and its resources, enslaving people, wars, bullying other countries ect.
@zareegoraya152811 ай бұрын
Tks! Bless you. Tell that to Uncle Sam!!
@FissionChips10 ай бұрын
The Industrial Revolution started in the North and Midlands of Gt Britain where those Webster and Bennet boring machines were made almost a hundred years ago.
@screwsnutsandbolts Жыл бұрын
Very impressive work ! 👍
@hydraulichands Жыл бұрын
Glad you liked it
@jz9985 Жыл бұрын
Brilliant work by talented team.
@hydraulichands Жыл бұрын
Glad you liked it
@Offender666 Жыл бұрын
lollll
@hydraulichands Жыл бұрын
@Flaming-Dwagon : Glad you loled it, some how it helps me
@dombogchi Жыл бұрын
It would have been very interesting to see that giant gear working at its operational setup.
@brianwood7480 Жыл бұрын
I agree. I love to see the end product doing what it's designed for. This gear isn't finished yet either, I'm sure it must be polished and hardened because this is not particularly hard steel.
@88997799 Жыл бұрын
Yea 5 minutes… it’s 3mm two small!.. 😂
@mapsofbeing59374 ай бұрын
right, it's just a standalone wheel right now, not linked to anything with the friction loss on those bearings, this can't be for a flywheel, what's it for I wonder
@ThFonz-dt3xk2 ай бұрын
Working harder than any American can imagine! Great work!
@wattienewton596710 ай бұрын
Ño computer's no boots no safety gear A whole lot of common sense n mathematical skills and diligent work ethics. Thanks for the video.
@hydraulichands10 ай бұрын
glad you liked it
@bobm2331 Жыл бұрын
It would be fascinating to get stats on work injuries.
@isaacibbotson4632 Жыл бұрын
What do you consider an injury? The one guy is sunspotted for life at this point
@Vassilika1 Жыл бұрын
There's not many, because they are using their brain while doing the job... ;-)
@balanair2577 Жыл бұрын
So that you can gloat over your superiority to these men who do a decent job with what they have got!
@3rddegreeburns494 Жыл бұрын
"We have no stinkin' injuries!" - Toeless Raheem
@waqasrafiq89 Жыл бұрын
Actually close to zero..In the west we go abit overboard imo....
@tuomashelin555 Жыл бұрын
Lifting the finished piece with a steel chain on a machined surface? Their machining tolerances probably vary from "just about" to "that'll do nicely".
@user-mk4kh9ii7o11 ай бұрын
ของโซ่ใส่ทีรูตรงกลาง
@Lampoffaithig11 ай бұрын
Yes😂
@alexandernikolaevich183911 ай бұрын
I claim this to ,
@oskarbennett7464 ай бұрын
salute to these guys. maybe some sacrifice on the precision but this is really admirable
@bluemarkthomas2 ай бұрын
I was a Toolmaker in the united states, never had the pleasure of making gears. When the gear is flipped how do you index it, so the teeth are aligned? True skill comes from using what you have to make usable parts. Anyone can make parts on new equipment/tools, it takes true skill to make quality parts on worn machines/tools. Great respect for Pakistan workers!!!!
@kjoyner1 Жыл бұрын
This machinist's skills are incredible. I would love to learn from him.
@oveidaluzgarciaperez5419 Жыл бұрын
.
@wedrivebynight6 ай бұрын
Why? It’s very basic machining. Feeds and speeds also don’t seem to be a thing here
@Rongamer1044 ай бұрын
You never get a job in a real gearbox factory with this skills ...
@garry843 Жыл бұрын
Like the coolant, really saving the pennies
@MrSKULLoO10 ай бұрын
They are paid in pennies, max $4 a day. So wtf you think they buy PPE of $80 steel toe shoes or food for families?
@kurtwm20102 ай бұрын
I am amazed by the work you are doing, but also amazed by the lack of safety standards.
@calebcourteau10 ай бұрын
Thank you for not speeding up the video. It’s hard to find industrial videos from developing countries that aren’t sped up 50% with the workers sounding like chipmunks.
@delawarepilot Жыл бұрын
The restraint these men show when not using that giant metal billet on a chain as a swing is incredible.
@shaunbrowne513911 ай бұрын
Yeah, got to love their safety footwear eh..
@ipadize Жыл бұрын
As always, work safety is number 1 priority.
@andrewsanders6270 Жыл бұрын
They sat it down like a piece of junk in the end !!!!!! Haaa haaaaaaaaaaa crazeeeeeeeeeeeeeee
@QuadMochaMatti Жыл бұрын
Except when you live, work, and die in Crapistan.
@greenmirror5555 Жыл бұрын
safety third. All taxation is theft...so its banned. Devalued money and Currency backed by nothing is the reason for all wars so punishable by death. Honest trade among friendship. Article 1 Section 10
@aqilalutfitech6159 Жыл бұрын
No safety no job...
@tomnugent845 Жыл бұрын
Just love those steel toed sandals!
@Disinterested1 Жыл бұрын
the working man looks the same the world over well done and have a great day :)
@belisarovelasquez596811 ай бұрын
Éste sí no es un trabajo computarizado, me parece increíble!
@donaldchase329 Жыл бұрын
When I worked in the machine shop I never would have worn clothing so lose aside from company rules I would be in total fear of being caught up in one of those machines and killed. These guys do a great job but you would think that the company would like to keep this much skill safe.
@Timothy-lb2vr10 ай бұрын
The loose clothing is a religious gesture not a company rule. All men wear them more often than not.
@douglascrawford3896 Жыл бұрын
These guys are awesome ,no fancy equipment and still get the job done ,now thats a machinist !!! nice work !!!! no awesome work with such old equipment ...
@hydraulichands Жыл бұрын
Glad you liked it 😇
@atoofficial7709 Жыл бұрын
This fabrikasi manufacture India or Pakistan country
@zareegoraya152811 ай бұрын
Clothes and speaking Punjabi from Pakistan
@zareegoraya152811 ай бұрын
Wow, amazing work! So much patience with such huge machines !
@Toesmack111 ай бұрын
Would like to see how they set up the RH and LH cut so both sides are in alignment. Would also love to know how long this takes. Mad skills!
@nigelmitchell35111 ай бұрын
It's marked out after hobbing one helix using a square and scribed lines, then a reference dot punch is marked in the centre of a tooth. A similar dot is punched opposite and the opposite helix is cut to this dot and it's aligned. A small error is unimportant as the gear will self align with its meshing pinion or wheel. The setting skill is in making sure you cut a full form involute and get your hob through the centre space without cutting into the opposite helix. I did this for 25 years making gears of up to 5 metre diameter. This guy's set up on the hobber is rather inadequate IMO, and we almost always climb hobbed whereas this chappie seems to prefer conventional. He has nowhere near enough cutting oil on the job to ensure minimal hob wear, it should be flooded. 👍🙄😄
@TheCaptainphil9 ай бұрын
Love your work and the work these guys do, BTW what is your camera, setup ? Thanks !
@hydraulichands9 ай бұрын
Thanks, entire setup, camera, post production, it's mobile phone, precisely iphone 13
@TheCaptainphil9 ай бұрын
@@hydraulichands Nice, I have the Iphone 14 and DJI gimble.
@andrewhession5054 Жыл бұрын
That ribbon swarf made my nuts tighten up , as an apprentice saw an older tradesman get slashed across the back of his legs on an identical borer, it came out under the job between the jaws like a demented whipper snipper
@derekb4731 Жыл бұрын
As a retired UK engineer, looks an amazing process, obviously working to tight tolerances, but wouldn't recommend the sandles, but fair play
@7thplanet121 Жыл бұрын
Not tight tolerances as the dimensions would be approximately. OD .5mm, recessed diameters as well as lengths are all clearance dim. .2 to .25 The spigot bore and overall length should be tight tolerances but in reality the teeth are machined after the bore is done and that bore sits in a spigot((mandrel)(with their setup))not the most accurate way but this is not a high speed gear. So it should be fine. I am more concerned about the working environment. Just because you have old machines it doesn’t mean you have to work in a dangerous way. They have families and should work safer. Clean up, that is one big step in safety. Second Do not machine in a way that creates a danger to yourself or others around you. Work efficiently and safely then productivity and accuracy will improve and everyone will go home with all their fingers and toes.
@rastislavstanik Жыл бұрын
@@7thplanet121 what would the application of such gear be?
@retinaquester Жыл бұрын
@@rastislavstanik Clearly it's for a Puch moped. Just kidding. Looks like maritime maybe.
@rastislavstanik11 ай бұрын
@@retinaquester haha that would be the 1000 hp moped :D
@MrOmar87211 ай бұрын
Es impresionante, la sencillez y humildad de estos trabajadores,; pero se puede apreciar que no cuentan con mucha seguridad personal, a nivel de equipamiento tales como botas o cascos.
@user-qt4gi3qy3c9 ай бұрын
Amazing work.
@hydraulichands9 ай бұрын
Thank you! Cheers!
@fqfcosta Жыл бұрын
Muito bom 👏👏👏 🇧🇷🇧🇷
@mortenfrosthansen84 Жыл бұрын
They must go through quite a bit of tools, drills and bits.. with how they maintain it. I bet a decent amount of time goes into jerryrigging the equipment into submission
@antoniobezerrabezerra83622 ай бұрын
QUE BELÍSSIMA MÃO DE OBRA, TODOS VOCES ESTÃO DE PARABÉNS...FAZER UMA ENGRENAGEM DESSA AÍ, NÃO É PRÁ QUALQUER UM. NOTA 10.
@franciscoguerrero7451 Жыл бұрын
Buenos días buenas tardes o buenas noches mis hermanos colegas excelente trabajo y excelente video les mando un abrazo grande a todos y su merecido like 👍 desde Monterrey NL México 🇲🇽
@TravelingWithLex Жыл бұрын
No hand protection. No foot protection. No head protection. No eye protection. Wearing thin, cloth clothes and sandals. Unbelievable. I really sympathize with these very skilled men, doing very dangerous work with absolutely no thought from their employer for safety.
@LClarke5 ай бұрын
I'm guessing when its breaktime, they simply walk out the back door and take a shite in the Ganges.
@craftingwithoutexperience9 ай бұрын
💥💥💥Hello. Incredible work as a metalworking person, your work is simply amazing to me. Can you please tell me how many hours it took to make this gear.👍👍👍
@josediaschagaschagas1040 Жыл бұрын
Trabalho lindo parabéns.
@rayly7291 Жыл бұрын
This is very stressful to watch as a german machinist, but also very interesting at the same time
@7thplanet121 Жыл бұрын
Not only the safety concerns. But the items around are bashed . Long swarf ((different speed and feed rate or a cutting tip with a different shape(chip breaker)) Even if they cleaned up the work area. You want them to go home in one piece.
@mortenfrosthansen84 Жыл бұрын
Firstly how quickly the equipment must break down. Second, what different tolerance does these products must have.
@dhstube Жыл бұрын
+/-100mm 😬
@jenskmigselv Жыл бұрын
What, you don't wear safety-sandals in Germany?
@MethodWelding Жыл бұрын
@@jenskmigselv 🤣
@taxiscot Жыл бұрын
good to see they have their safety sandals on
@Mike_Netic Жыл бұрын
Propper safety boots eont help regardless 😂
@CactusforceX Жыл бұрын
@@Mike_Netic I dunno, I dont like the idea of stubbing my toe on a big piece of swarf if I'm wearing open toed sandals xD..
@charlesmadisonrhea Жыл бұрын
I doubt they have the money for safety equipment. The do a lot with a little
@louisrichards340711 ай бұрын
Leave the people alone they are doing their best
@martinswiney219211 ай бұрын
Great job. Looks good.
@stevejudge78737 ай бұрын
I really admire the safety flip flops of the crane operator. APROVED!
@marcbush2796 Жыл бұрын
How could the transport truck at the beginning survive the delivery of that element?
@someoneelse7629 Жыл бұрын
I like how they have tuned every single machine to have its own uniqe chatter screech in a different tone....
@hydraulichands Жыл бұрын
Glad you liked it
@OtisDavies-cv6ze8 ай бұрын
How are these guys not getting metal shards in their eyes, hands and feet. I use the old machines, from the 1930's and they work quite well, when you use micrometers, dial calipers, dial indicators and the proper measurement tools. Infact the old machines will do very good work with the proper measurement tooling, just slower than today's machines and more hands on and manually having to oil the work and machinery. The work being performed is work from the 1860's-1940's. I'm glad to see the old ways are still alive and thriving. In the US, most young machinist would never know how to operate a manual lathe or mill. It is almost a lost art here. If society were to crash, the US would have to go back to the old ways and not many people know how to operate those machines. Probably only a few hundred thousand people in a country of almost 400 million population. Great video. I always look forward to watching these videos from India and Pakistan. The old ways are not lost there
@thorham13464 ай бұрын
The working conditions make this not much fun to watch, though ☹
@greenmirror5555 Жыл бұрын
How does one match the cutter for the bottom teeth before starting the cut on the top ones?
@trappenweisseguy27 Жыл бұрын
The old Sherman tank used a double herringbone gear like that in the final drive, which was much better than the Germans use of straight cut spur gears.
@alanolley7286 Жыл бұрын
Andre Citroen invented the double helix gear hence the 2 chevron logo
@anonymous-nobody1 Жыл бұрын
I see they have the OSHA approved sandals, eye protection, and welders mask! Obviously worker safety is not high on the list
@sdspivey Жыл бұрын
The welder did have a safety squint. What more could anyone do?
@shortaybrown Жыл бұрын
Safety doesn’t matter, there’s always another worker is willing to work for a few pennies an hour. They don’t need safety glasses because all their workers have at least two eyes. Somebody should make a TV show of the emergency room in that neighborhood.
@djisydneyaustralia Жыл бұрын
It's Pakistan, America doesn't run the world you know, they just try to dictate to it.
@oliveringram3056 Жыл бұрын
And that is why they can undercut the rest of the world on price.
@hydraulichands Жыл бұрын
common sense is the biggest safety, i invite you guys to come back for future videos and you will see all these wonderful people working with their full body parts and smile on their faces
@embrj14538 ай бұрын
These videos are addictive ...
@fabiss23 Жыл бұрын
nice, very safe, precise and beautiful, just like swiss clockwork...
@hydraulichands Жыл бұрын
😉😁
@4376ED Жыл бұрын
I see that safety flip flops are standard footwear.
@javiercorreapr9977 Жыл бұрын
No welding mask either 0:50
@raylarkin5004 Жыл бұрын
Safety flip flops and work rated pajamas
@thefonzisback1749 Жыл бұрын
Blah Blah Blah, yet you folks still keep on watching
@zareegoraya152811 ай бұрын
Yup to all above, it’s in an underdeveloped country ( kept that way purposefully: see recent outbursts) by our “allies” !! Regime changed whenever it starts to get up !
@andrewwolf4430 Жыл бұрын
Sandals!! I use boots in my shop and sometimes end up with burrs in my feet
@hydraulichands Жыл бұрын
you better visit them to take training class from them
@ripvansparky5 ай бұрын
There feet are probably so calloused they are like gnarly old leather.
@user-lw5vn4ju6q9 ай бұрын
love the flip flops on the crane driver....
@christianvalenzuela225 Жыл бұрын
This people is incredible! Skilled, smart workers, lack of advanced thechnology, but they are able to construct nukes! My respects!❤
@hydraulichands Жыл бұрын
Glad to hear that
@Basement_crusader Жыл бұрын
India and pakistans nuclear weapons are by and large provided for and maintained by Rosatom, the Russian nuclear agency. Sorry
@morbidmanmusic10 ай бұрын
smart... ZERO safety is stupid. No respects!
@stevecollins1667 Жыл бұрын
Don't worry it looks really safe in there and nobody needs steel toe work boots
@davidswanson5669 Жыл бұрын
Hitting the tooth of the chuck @ 18:08 was hard to watch.
@mikeprzyrembel11 ай бұрын
Jaw of the chuck but we know what you meant!😀
@Mhd_ilham_azhari11 ай бұрын
The best man....amazing
@teretano5 ай бұрын
Excelente trabajo en la factoría, también debe ir acompañado con las medidas de seguridad, zapatos, ropa apropiada, guantes, casco, etc, etc.
@pjdominey10 ай бұрын
I think this provides the most excellent visual evidence of why manufacturing quality has declined so severely. It was like watching a video of manufacturing in the 19th century. From the very start the whole process was dependent on one gut with the mk 1 eyeball and a beat up old tape measure. No continuous, real time measure of material being removed of constant read out of the current dimensions. Look at the amount of discoloured chips coming off, because they couldn't use sufficient cutting oil in those conditions (they'd be wallowing in a river of cutting oil). So the cutting speed has to be very low, not good for qaulity finish. And are these the working conditions we think are conducive of quality products? We all ought to be appalled that people are required to work in such conditions with absolutely zero safety. Do we think it is some how manly to work like that?? All this shows is how bloody far we are from a decent society. People would only work in such a place if their forced to. I'm sure for near slave labour rates. Yes it great to see some of these old machine tools in operation, but not when you give even 20 seconds of thought of what that is actually showing.
@hydraulichands10 ай бұрын
Everything you said is Genuinely True
@MaloneMantooth10 ай бұрын
People do what they gotta do. Part of it is when you are a good and fast worker or can make things happen with less materials and processes then the bean counters say “well you did it without last time”.
@commie521110 ай бұрын
It all depends on how much the end user wants to pay. If the end user wants high end and pays more, th more sophisticated machine can be bought. Nobody is going to buy a muti-millions machine to produce something cost a thousand dollar. It got nothing to do with manufacture quality, it is economics.
@drummerdorcas9 ай бұрын
You seem slightly dramatic to me but I get your point
@Ssm194946 ай бұрын
@@hydraulichandsyet you will not improve your conditions? What are you waiting for? Wasting money to get fat only
@3RPRECISIONMFG Жыл бұрын
the finishes aren't great but overall impressive considering the working environment and equipment they have
@wannabebushman1669 Жыл бұрын
Also wouldn’t they save a lot of time and materials if the billet was forged into a rough shape first?
@josepinto9416 Жыл бұрын
Un excellent travail merci
@gennarocaimano4602 Жыл бұрын
"Fun fact" : here in Italy we have safety shoes made in India🤦♂️🤣🤣🤣
@-Element. Жыл бұрын
Here in Russia too
@MrWokyman Жыл бұрын
I wonder what the health and safety record is in this place :)
@joeykuiperij4806 Жыл бұрын
😂
@dr1verman11 ай бұрын
Non existent
@pranavshelar60187 ай бұрын
verry creative work hats of all worker
@MarkHill45 Жыл бұрын
Nice work. VTL's are fun.
@davidlittle9010 Жыл бұрын
They turn out a nice product, but in totally unsafe and messy conditions. I’m surprised workers feet aren’t sliced open by walking on all the chips. Get somebody to sweep up in there. At least the crane operator had on his safety sweater. 😮
@hydraulichands Жыл бұрын
Well! Thanks for product acknowledgment, You can come back to watch these people with full body parts in future videos, which means they are safe, working all days and many nights 7 days a week, trash, swarf and chips pilling up every minute, these load and loads of metal remaining are taken care off when needed.
@metallicman711 Жыл бұрын
@@hydraulichands These guys are working in extremely unsafe conditions. They need at the very minimum to be provided with steel cap boots, safety glasses, proper overalls. There are numerous hazards in this workshop with trip hazards, giant piles of swarf laying around, power cables laying on the floor amongst all of this
@emanuellia1159 Жыл бұрын
What is the meaning e of bettoxu
@davidlittle9010 Жыл бұрын
@hydraulichands - I understand. No body wants their family get hurt. I’m totally impressed by your work - especially that old gear hobber - I had a teacher once who said “well maintained tools will never wear out”. You still make me nervous wearing open toed shoes around really heavy and Sharp stuff. But love your work.
@nathanscott7910 Жыл бұрын
@@hydraulichands the next thing you'd have us to believe is noone ever gets injured on the job.
@nonameyoutube4509 Жыл бұрын
Amazing job!👍👍👍🤩🤩
@carlmanns9232 Жыл бұрын
Very interesting. But are those sandals up to OSHA standards?
@JosePineda-jn8jk10 ай бұрын
I just imagine on the metal slivers you have to deal with in your toes and feet. Dayum
@BspPlays9287 Жыл бұрын
What's weird is even with it being so big the edges would slice you like a razor.
@durinf10 ай бұрын
How the heck, is that guy in the truck arc welding without a shield for his eyes? Does he cry himself to sleep every night? 🤣
@andyguyuk1 Жыл бұрын
And no music, perfect!!
@TrevorDennis100 Жыл бұрын
Colin Furze could do a roaring trade selling his Safety Ties to these lads.
@cordoroy9515 Жыл бұрын
Why do people bother watching videos like this just to boar the rest of us about health and safety. Ill watch a H and S video after this thanks.
@douglasheld Жыл бұрын
3:12 The exposed electrical wiring on the drill press looks pretty dangerous. I wonder what the voltage is?
@GS-di5wx8 ай бұрын
Pretty cool to watch. Love the OSHA approved foot gear, then around 13:11 a goat walks into the factory.
@jeffduncan7685 Жыл бұрын
Yah OSHA would go crazy in that shop if in the USA. We may have gotten safer in the US but our quality has also suffered as well as our work effort. People back when I was a kid had common sense, today there would have to be warnings on everything say heavy, sharp edges, and even known to cause cancer in California or some other stupid shit.
@levitated-pit Жыл бұрын
same here in the UK.
@Basement_crusader Жыл бұрын
The people working manufacturing jobs in the United States today are less intelligent than the people working manufacturing jobs back in the good old days when your koolaid had cadmium in it. The machinists and blue collar workers who used to work these factories now work as engineers, at tech companies, or in academia today because those are the fields that have jobs which a reasonably intelligent person can have a career that they can survive on. Everyone that still works in a steelmill in the US does so because that’s the limit of what they are capable of. Therefore, the safety warnings.