Metalcloak Aluminum Overland Tube Fenders Install

Metalcloak Overland JT/JL Tube Fenders: bit.ly/3OIv31t
Get 20% off OnX Off-Road: bit.ly/OnXTSTN
Teddy's Channel: ‪@UnwindingRoads‬
My Gear:
Anker Portable Powerstations: shrsl.com/3s52n
Epic Kraken Tire Inflation System: bit.ly/epickraken
67 Designs Mounts: bit.ly/67designsparts
Devos LightRanger Camp Light - bit.ly/3p3BS1g
Jeep Tent: GFC Platform Camper: bit.ly/3A6ncnm
Bronco Tent: iKamper SkyCamp 3.0: bit.ly/3xR1ZN4
Dometic CFX3 55 Fridge: bit.ly/cfx355
Geyser Shower: www.geysersystems.com/ref/the...
Heretic Studio Lights -
TrailRax TRMR Bronco Roof Rack - bit.ly/trailrax
DMOS Collective Delta Pro Shovel -
Desert Does It Seat Jackers - bit.ly/seatjackers
Recovery Equipment: freedomrecoverygear.com/?Apply...
Z-Roads Bronco Roof Rack: bit.ly/zroadsrack
Awning: bit.ly/treelineawning
Awning Room: bit.ly/awningroom
Water Tank: bit.ly/waterport
Trailgater Adventure Table: bit.ly/trailgater
Brought to you by:
Epic Adventure Outfitters:
www.epic-4wd.com
White Rock Dodge
www.whiterockdodgejeep.com
Modula Racks
modularacks.com
Toyo Tires
bit.ly/toyocanada
Anker
shrsl.com/3s52n

[@TheStoryTillNow]

A huge thank you to Teddy for helping me out with this week’s video while I’ve been recovering from Covid. Thank you also to my friends at Metalcloak for the support. If you need some armour for your Jeep, please consider their stuff. Metalcloak Overland JT/JL Tube Fenders: bit.ly/3OIv31t Thank you also to OnX Off-Road for sponsoring this video! Use my link below for 20% off, which I also get a small commission for, and supports our adventures. Get 20% off OnX Off-Road: bit.ly/OnXTSTN

[@UnwindingRoads]

Thank you for allowing me to vandalize your truck 😁

[@rorythornton3335]

Good job Teddy i dont often comment on videos but the one thing i would have done is use a rust inhibitor on the spots you drilled out on the jeep and metalcloak parts. keep the vids coming guys.

[@tacodrewww]

I think I can watch Teddy kicking that fender off on repeat 🤣🤙

[@karstennosse9030]

Wouldn’t it be bedder to remove the dirt first bevor installation and put some anti corrosion fluid on fresh drilled holes..?

[@UnwindingRoads]

Yes

[@wildskyoverland]

Nice work Teddy.

[@UnwindingRoads]

Thank you!

[@UncleElroy21]

I love the new metal fenders metalcloak came up with, but im also happy i live in Texas where i can run fender deletes 🤘

[@richardboehm7327]

Teddy!!!! Great job! Loved it and I don't even own a jeep. But...why did we have to wait till the end to see the Teddy we know! Duke slide needs some work lol. Nice work guys. Something different but nicely done!

[@heydaviddavis]

kudos to the producer who engineered and mixed this music. wow

[@dougmclean8328]

I ran metalcloak fenders on my old TJ. They took a beating. I have metalcloak stuff on my JL, and plan on getting more, along with a 4.5" lift. Great products and stand behind everything they sell. The rig is looking great.

[@TheStoryTillNow]

Thanks!

[@phelandeluna5439]

I hope you got a good discount on those, they didn't even clean up the sloppy welds!

[@MrSKOHC]

Teddy is so much fun!

[@UnwindingRoads]

Lol thank you!

[@Thexkidd]

This Teddy guy looks like a movie star!

[@UnwindingRoads]

Like Frank Grillo? Or Danny davito? Lol

[@Thexkidd]

@@UnwindingRoads no. More like Tony Danza. A young one. Who was a boxer also.

[@josephSF]

Great video. Could use some additional light underneath to see details, though. am tackling this install next week. Thank you!

[@wrangler70jkujeep74]

Awesome 😎👍 looks killer 👍

[@KootenayAdventures]

Looks good!

[@nickfraser2844]

NICE ONE TEDDY I MEAN SHAUN.

[@V8AmericanMuscleCar]

Nice! In my opinion flat fender flares looks the best.

[@leemen]

I love me some Metalcloak!!

[@brucesinclair9628]

I love the Metal Cloak line, I have their 3.5" lift and a few other parts quality stuff!! Nice video Teddy, well done. Shaun, I wish OnX would have more stuff in Alberta, we share a great boarder with amazing trails, just nothing on the Alberta side... Maybe we need more "ambassadors" this side to start populating the trails?? Take care

[@TheStoryTillNow]

I’ll pass that on to them! :)

[@jonathanball6188]

I tried OnX when they made it available on a trial basis as part of the Jeep Wave program. Ridiculously bad. Did not show the US Forest Service trail in Colorado that I was actually on while using it. Showed almost no trails in Michigan. Needless to say, I did not subscribe after the trial was up.

[@rodhenderson8359]

Good friend right there

[@TwoFeet.FourWheels]

Love Metal Cloak

[@bigbgarage]

Whoa! Loved the video instruction. Nice work showing the ooops parts. haha.

[@bradcaviness1256]

Get well soon Shaun!

[@dawnfirephotography]

No Shaun but it's ok because you gotta love Teddy

[@UnwindingRoads]

Cheers!

[@EngiTrek]

The Teddy Till Now? Hahah.

[@UnwindingRoads]

That's incabins!

[@EngiTrek]

@@UnwindingRoads it really is!!!111

[@leemen]

Also, a great job by Teddy who covered for you. Does he have a channel? The silver gladiator looked so out of place all stock. Made me feel bad for the little guy.

[@TheStoryTillNow]

Yes his channel is linked in the description. Give him a sub! :)

[@leemen]

@@TheStoryTillNow I didn’t even see it. Thanks. I’ll give him a sub now.

[@UnwindingRoads]

Cheers Leemen. That gladiator definitely won't be stock for long.

[@leemen]

@@UnwindingRoads glad to hear. Gladiators look so incapable stock. Even though I’ve taken stock jt Rubicons to some crazy places.

[@joshuathorpe3808]

Ok, great install, cool fenders. I have one question however does the new week point become the sheet metal of your quarter panels? Because of the fender a solid something has to give. I’m interested to know how this works out. I like them. I have the quick inner fender, delete on the stock, painted fender of my jeep, and I have next ventures motorsports Christmas tree clip delete to screw in. I really put extreme stress on my left rear one last weekend, and my partner had done the same, but with metal fenders and dented his Jeep. I scraped the plastic and put touch up paint. No body damage was taken. But his Jeep took looks like Mike Tyson punched it.

[@sierramantrvlnus]

Yay!

[@chucksrchabit.7671]

Awesome video. I will soon be installing fenders on my 392 when the rears are shipped from back order. Aren’t you able to remove the fender with the inner fender still attached?

[@UnwindingRoads]

Now that I think about it. Probably! The clips are threaded so maybe just don't put the clips in. It should work...

[@Dakar.Roamer]

Function over form.

[@JendellOverland]

I looked into that OnXOffroad, unfortunately the only place in Canada is BC. No Ontario maps. so I will pass on this for now. Highly appreciated though!

[@samwatts4309]

Where the hell is Shaun @!!! Shouldn't he be helping @ least??? Oh yeah, he's editing new video's!!! Happy Holidays guys!!!🐊😎🍻🤙

[@DavoWright]

1) Rust Problem? Are the "Nifty Things" aka Clips with Nuts (time 9:32) made of stainless steel? If not they look like they will rust out in a winter. A small steel part (Clip with Nut) with all of its sharp edges and surface area is going to rust like crazy if you live in a cold winter area with salted roads. 2) Damage Multiplier? It doesn't look like there is enough reinforcement behind the fenders to stop them from damaging the body sheet metal ? If you take any hard hits or do some rubbing will you please post a follow up on how well the fenders hold up and protect the body.

[@TheStoryTillNow]

Everything is aluminum.

[@koicrazy1542]

Great Video Shawn! Not like Casey's stupid video he just released lol Great job Teddy!

[@UnwindingRoads]

Lol that's really funny. You made my day 😂

[@TheStoryTillNow]

What’s wrong with Casey’s video? 🤔

[@koicrazy1542]

@@TheStoryTillNow Every single issue he has with the diesel has a remedy, When you buy a jeep you modify it, just doesn't make much sense to me.

[@suraajsingh8780]

👍

[@kodypilger]

Looks decent but I really like the poison spider parts.

[@VanagonGeek]

I used to like Poison Spyder until they sold to the evil empire.

[@rubiconoffroad]

Did you have to modify the front inner fenders to fit with the falcon shocks that you have installed?

[@TheStoryTillNow]

I didn’t but it would help.

[@paulsmit8147]

🤙

[@offroadexcitement0211]

Great video as usual. I have a question more than a comment. When the Trail Wrecker died and you ordered the new one, Did you think about a Diesel? If so, what made you go with gas? I'm about to order a Gladiator and I'm really torn between both. What are your thoughts?

[@TheStoryTillNow]

I’m not sold on the diesels. They have issues often from what I’ve seen and they are being discontinued.

[@jeffwisemiller3590]

Heard comments about the limited power range of the diesel whereas gas has a much broader power range. With gas, you can crawl up something instead of just sending it with a diesel.

[@jonathanball6188]

Do the diesel, it's a beast. So much more torque than the gas engine. Very rare when I have to go into 4LO on the trail. Plus at least a third better fuel economy.

[@wmullin22]

I'd pull it all back apart, paint the bare metal and clean everything before reinstalling. Begging for rust as is. 😬

[@UnwindingRoads]

It's aluminum.

[@randyjohnson3712]

Great video Teddy. Only thing I would add is after drilling out the holes hit them with a little primer and paint. Keep out the rust from the wet coast rain and mud. Hope your feeling better Shaun.

[@VanagonGeek]

I believe the part he drilled is aluminium

[@HedoBum]

Unfortunately OnX doesn't work in Canada....won't even show up in the PlayStore. When I use my VPN and set it to the States, it will show but when I try to install it, I get a message saying "Not available for your area". Even tried contacting OnX and they gave me some half-assed work around for the OnX hunting version only. BRMB works anyway. Just have to stick with that.

[@TheStoryTillNow]

You can download the install file manually from various websites for Android, and it works in a browser. I'm told it will be launching very soon in Canada.

[@HedoBum]

@@TheStoryTillNow at least we have the option of sidloading APKs. I'll have to hunt one down. It works without the subscription?

[@taylorstanton5130]

ive never heard a ziptie being called a zap strap

[@This_is_My_Story]

Are they wider then stock?

[@kengeroo]

can you stand on them for roof access ?

[@UnwindingRoads]

Yes you can. They're very sturdy.

[@Elprez69]

How many kilometers on that beast so far??

[@matthewsfrawley]

I am not sure if I am the first one to ask or not. I have a 2022 Gladiator Sport, what are you doing with those Rubicon fenders sir????? (psssst, I want them).

[@UnwindingRoads]

Lol I also just bought a sport. I threw his rubicon fenders in the back of my truck 😂 Definitely installing them. Shaun was kind enough to donate them to me.

[@matthewsfrawley]

@@UnwindingRoads booooo, jk. you did the work, you get the benefit.

[@jobisrael8313]

I hope I got this right to do all four it cost $1,000. 12-07-23

[@SeibChris]

I'm surprised you guys didn't use Aqualu fenders..

[@TheStoryTillNow]

I like these ones.

[@SeibChris]

@@TheStoryTillNow That's fair, they're really nice and look super stout.

[@rbholdings7361]

I thought I clicked on the wrong channel for a second, lmao.

[@dinkydotzero]

Good lord the chicken shit welds on those front fenders !!! Gotta give it up to Metal cloak hiring the blind to weld lol

[@jonathanball6188]

Was thinking the same thing. No way something that poorly manufactured is going on my Jeep. Made in China?

[@md4curvs]

I was going to say the same thing. Horrid welds.

[@findingadventures5431]

A 1000$ just for the fronts??? Come on that's crazy.

[@BY-dq3mt]

Wait a second…where’s the ginger?

[@TheStoryTillNow]

Probably combing his beard somewhere

[@jeremypricock]

did my guy say zap strap??

[@TheStoryTillNow]

That’s what they are called, so yes!

[@j.r.1426]

Very dark couldn't see half video

[@VideosOffRoad]

While there are definitely good things about these, don't be at all surprised if you get large chunks of mud all over your hood, windshield and (yes) roof, and even your headlights. Seriously. Stock up on washer fluid, and bring extra with.

[@TheStoryTillNow]

I’ve never been concerned with getting my truck dirty 🤟🏻

[@VideosOffRoad]

@@TheStoryTillNow Personally I'd be more concerned about the windshield and headlights, myself. Those are safety concerns. But as long as you stop to clean them when they get bad, which we should all do anyway, obviously it'll be fine. Just expect to have to do that more often with these flares than you were used to, if you're in a muddy environment. That's all I'm saying.

[@Chadh90]

🤣

[@sixthplace6032]

Those welds look awful. No thanks.

[@jonathanball6188]

Terrible. And the fact the holes didn't line up and had to be drilled out.

[@bootmender]

Your lighting was horrible.

[@RevereOverland]

You mean the sun?

[@UnwindingRoads]

Maybe it's your tv settings? Lol. Jokes. it definitely could have been better.

[@TheStoryTillNow]

I complained to the weather man but he ignored me.

[@Timothytbanks]

Bring back the bronco..