Method RC Belted Tires on the Arrma Mojave EXB & Traxxas Sledge

[@greatwhitenorthrc509]

The Mojave is an absolute beast I’ve thrashed mine for two years , nothing but bumper mounts , a couple out drives and bearings .

[@oloap72]

Great video, i suggest you to protect the chassis and Underneath the car in general using transparent film and tape over it. In this way you 'll Save from gravel and stones

[@Dos_Rc]

I ordered a set for my Mojave a week ago shipping is a bit slow come on method Rc can’t wait to run them on my Mojave exb

[@reconrc1787]

I put them same tires on my Mojave 2 weeks ago and my Kraton 8S. I like them on the mojave, let's you slide around just enough. only thing I don't like is they came vented through the plastic wheel. I ended up putting 4 holes in each one of my new tires and sealing the wheel holes.

[@reconrc1787]

The other thing I've noticed that's a positive is that I'm not blowing diffs on my 8s Mojave each time i run it. The tires give just a bit less traction under hard acceleration but still plenty of traction for wheelies if I want and controlled driving.

[@JasonPerrinRCVlogs]

Good point!

[@DJSpannamanUK]

Basically that last throttle blip as you hit the ground. That's what popped the teeth

[@Ready-Set-WORK]

Nice wheels i will get a ser for my mojave exb as well. They look awesome and look like they hold up nice

[@paulclancy2404]

Have use mini torch till you hear the lock tight crackle. I stripped first one on first arrma I bought v1 outcast and they still use all LT

[@reconrc1787]

What Castle 1650kv motor are you running? I put the 1520 1650kv in mine and I'm running at 25T pinion. It's stupid on 8s and I typically run 6s. Even still I go through diffs like exe wives. 😂

[@JasonPerrinRCVlogs]

1717. Running mild with a 20t for now.

[@reconrc1787]

@@JasonPerrinRCVlogs Are you running into issues with your diffs from your 1717?

[@rctezluh42069]

Can you tell me how you keep castle fans blades from ejecting in those MMX8s, thanks, upvoted!!!

[@jacobhenson3952]

It’s hard to tell but they seem like they are light weight ? The proline mx tires that are belted seem really heavy to me. I’m looking for something for the Sledge when I wear the stock tires out. Oh and by the way your son is really good with the camera very good job.

[@realworldrc5717]

Any idea when the new hexes will be available. Could not find them on the website

[@alankowalski8781]

Jason, I have had trouble finding the tire size for the Losi Super Baja Rey 2.0, do you think the tires for the Mojave made by Method would fit it?

[@GreatLakesRC]

I like how you set up the EXB! I have seen these tires around and they look nice. What do you like better, these or the jetko tires?

[@JasonPerrinRCVlogs]

Hard to tell. I will be doing a comparison soon. I do have the 1/8 MT size from both companies.

[@jvallido]

how are they on speed runs? i need to swap my backflips soon and still debating to go with these or prolines street fighters for my outcast exb.

[@reconrc1787]

They actually work really well for speed runs. The only thing I didn't like about them is they are vented on the inside. They do have a perfect balance of traction and responsiveness without feeling mushy at high speeds and in the turns.

[@jvallido]

@@reconrc1787 thanks! Can't you just tape over the vent?

[@reconrc1787]

@@jvallido Yes you can. I just filled the holes with a little epoxy and put 4 new holes in my tires. It's working well but I much prefer this to be done by the manufacturer.

[@greatwhitenorthrc509]

I don’t mind the sledge but at like $1100 Canadian dollars it’s over priced, we all know the traxxas esc and motor won’t last long , couple that with the chassis issue etc exb kraton still my choice.

[@keeponrcnbrianmiles4207]

U should put some tape over that instead of blaming Traxxas. Ur running on gravel lot what do u expect. Lol so do u like the tires