MFactory Rebuilt D16Z6 Transmission w/ Short Gears & LSD install Project Civic EK

[@JoshGotStronger]

Glad to see this, please update with a full review with the mfactory lsd!

[@upfactoryracing4148]

Great upgrade! That z6 final drive is a solid bump over your y7 so down the road a 4.7fd will blow your mind. Glad to see you guys getting back in the saddle!

[@Officially_Lauro_Built]

I am glad I ordered a shirt from you guys. Great work with the car. Waiting for you to go B series one day. For the mounts I did a little method of putting 100% polyurthane glue from home depot and let it harden over night so its solid.

[@shahrulnizam4713]

From the driving clip you did there its performs very good. Can't wait to see how it performs in the track!

[@kylescottjohnston]

A lot in this post. Thanks for your time. Replacement poly the the mounts, I didnt know

[@tylerxjent]

Man I love that hood? Who's the company who makes it?

[@tedsommer]

Nice setup Travis! Should definitely keep ya in the powerband and help with acceleration out of the corners

[@jbaugh8329]

I’m going to have to try those engine and trans mount inserts! You should review them after the next track day! Great video!

[@mihailpetrovici5044]

Is the z6 transmission B000?

[@diegogonzalez7279]

You did the weekest Point on a D for sure from now is just about power brother

[@da9ej1eg99]

Can u send link of parts looking to do same on my d16z6

[@sktaroins]

Well done on the whole video edited nicely done

[@arthellstrobles1241]

Rewatching this 👍🏿👍🏿

[@莊竣傑-z2x]

Wow so cool!! How much time do you install automatic transmission??

[@alexiscastagno86]

Refine Movement Does the D16Z6 manual gearbox contain 10W 30 motor oil? Thanks.

[@RefineMovement]

I use Honda manual transmission fluid or Torco manual transmission fluid

[@alexiscastagno86]

@@RefineMovement And what degree of viscosity does it have? Thanks.

[@RefineMovement]

No idea. Google that shit

[@richyab6237]

Hi, great video, how much did you spend in all the kit, LSD, syncros, ratios?

[@beastatpoi420]

Anyone know the modification needed to the z6 trans case for the bigger gears?

[@brokeanbrokengarage8494]

Would it be able to be Abel to handle more power ??

[@christianguzman7411]

Why is my y8 trans not going into my z6 block not aligning could it be my stock mounts for 99 civic or what can it be I already aligned clutch with tool

[@grantd007grantd]

Not to be a total critic, but did Patrick recommend the helical LSD? Helical isn’t exactly “race”, but it will make a big difference I imagine. Generally, people who race use plate-type LSD’s

[@MFactoryTV]

The plate LSD was initially chosen but it was a hard decision to make with the budget constraints. Ultimately, it was decided that the close ratio gears would provide better results alongside the more affordable helical.

[@Bentlyco0p]

When filling transmission fluid you should be using the hole you mentioned fluid coming out of. Honda OEM fluid is ok for factory and daily driving, would definitely use the Torco for race use though.

[@MFactoryTV]

Fluid filling can be simplified with a long funnel. Remove the VSS and insert the funnel into the hole and pour 2 liters in.

[@Bentlyco0p]

@@MFactoryTV I've done this too, however Honda did provide a way with a fill plug above the drain plug , completed with a hand pump like in the video.

[@MFactoryTV]

@@Bentlyco0p Honda may have a by the book proper procedure but Honda techs do it the VSS method because it's faster and doesn't involve using a pump plus it's just as accurate.

[@ancientapparition1638]

@@MFactoryTV good tip man appreciate it

[@gmprex2766]

I’m slapping a z6 in my 98 ek having trouble getting the rear trans bracket on also i need information on where all the grounds are located

[@tigris4149a2]

What happened with the trunk?

[@RefineMovement]

See last track vid

[@izudinmna336]

Hallo...d17a gearbox can use this close ratio?

[@G13BBPower]

Only I use Mtf3. How every I hard i push the Car. No Problems with this!

[@roronoa7vector]

Awesome awesome!!!! Great upgrade 👍 can't w8 to see new transmission and lsd on track! One question Travis is this exhaust pipe 2.1/3 inches? Soz for my English...😁

[@RefineMovement]

It’s the stock pipe

[@maideantrico3678]

z6 from sohc or dohc?

[@georgehill4884]

Where did you get your aftermarket mirrors?

[@RefineMovement]

Ebay apr

[@georgehill4884]

Thanks man 👍

[@ApolloTx817]

How do you know if your trans is a z6?

[@RefineMovement]

It is

[@smb9681]

Very instructional

[@bloodya2h773]

what spoiler is that?

[@shahrulnizam4713]

Civic Si spoiler

[@whatheck6709]

Meanwhile i still got that 3.722 final drive in my hatch 🌚

[@esnebta]

Don't ditch that final. If you ever have to dump that trans, please hit me up. The 3.722 final on the 96-00 civic HX and the 96-00 hatchbacks is a good final drive to use with the d16z6 / d16y8 trans with the mfactory 3/5. I ran this setup back in 2007.

[@whatheck6709]

@@esnebta 232,000 miles and counting. No grinds or pop outs. Still find it funny that 3rd gear goes to 100mph while in the EX transmission, itd be in 4th gear already

[@citystarridin]

BenseBuilt how was freeway driving with the 3.722 FD? I have a 97 Ex I was gonna rebuild with the mfactory 3rd/5th

[@esnebta]

@@citystarridin 4400rpm a 80mph with 205/50/15. facebook.com/BenseBuilt It's very similar to B16 fifth gearing. Don't worry about it being too high of rpms. It's not.

[@esnebta]

@@citystarridin oops. The numbers I gave you were with to 3.7222. I ran 4.25 with that setup. It was too short.

[@arthellstrobles1241]

Officially the first hater cause of the LSD😁