MGB, MG B, 1963: CLUTCH AND BRAKE MASTER CYLINDER FIX PART 2

  Рет қаралды 1,696

MGBs and Other Stuff

MGBs and Other Stuff

Күн бұрын

MG MGB 1963 MGB MASTER CYLINDER PART 2. REBUILDING MASTER CYLINDER FOR 1963 MGB. ALSO, SPIN ON OIL FILTER ADAPTER (INVERTED TYPE) AND COPPER HEATER RETURN PIPE. REBUILD KITS, PEDAL BOX, BRAKE LINES, CLUTCH LINES, OIL FILTER FIX, Roadster, specs, specifications, KZbin. Vintage and classic British roadster.
0:00 INTRODUCTION
0:09 WELCOME
0:32 AGENDA
1:05 REBUILD "THE BOOT"
2:41 SECONDARY CAP INSTALL
6:15 VALVE AND SPRING INSTALL
7:21 MAIN CUP INSTALL
8:30 PISTON WASHER INSTALL
8:57 PISTON INSTALL
12:42 INSTALLING THE MASTER CYINDERS
17:00 PEDAL BOX INSTALLATION
20:50 INSTALLING THE PEDALS
25:13 INVERTED SPIN ON OIL FILTER ADAPTER
27:11 COPPER HEATER PIPE RETURN INSTALL
28:55 OUTRO

Пікірлер: 5
@MGB-learning
@MGB-learning Жыл бұрын
Great video!
@mgbsandotherstuff2982
@mgbsandotherstuff2982 Жыл бұрын
Thanks for the comment. I just started using a new video editor and have to work on the audio bits.
@Nickcirrus
@Nickcirrus 8 ай бұрын
Great video
@johnvalentine4909
@johnvalentine4909 Жыл бұрын
Hello again. Good repair video. One thing I have found to be useful when reinstalling the clutch/brake unit is to remove the large rubber plug that goes through the firewall directly behind the assembly. The first bolts you should install (finger tight) are the ones holding the assembly to the firewall. Then, with the Rubber Plug out, you can easily install the 2 Banjo Bolts on the back of each master cylinder. Follow with the rest of the hold down screws. Check that all are tight, install the pedals as you did and you're done. I must say that your videos are very well done and are always a joy to watch. I even find myself saying " OK, next we should be putting the ---- together" and that's exactly what you do! Its almost like you can hear me! Looking forward to the next one. At present, in my garage, I'm finishing a '67 MGB-GT Special. Installing the Dash and wiring it up. Next will be installing the Headliner which is a job I will need some help with. Good luck! John
@mgbsandotherstuff2982
@mgbsandotherstuff2982 Жыл бұрын
Thanks John, that is very kind of you. I certainly am learning as I go and building an inventory of tools and knowledge. Especially from the comments I get. I will say though that I sometimes have overdub a lot of audio until I eventually figure something out.
MGB, MG B, 1963: CLUTCH AND BRAKE MASTER CYLINDER FIX PART 1
17:58
MGBs and Other Stuff
Рет қаралды 2,6 М.
БОЛЬШОЙ ПЕТУШОК #shorts
00:21
Паша Осадчий
Рет қаралды 10 МЛН
Nutella bro sis family Challenge 😋
00:31
Mr. Clabik
Рет қаралды 13 МЛН
I CAN’T BELIEVE I LOST 😱
00:46
Topper Guild
Рет қаралды 120 МЛН
Nigel the 1977 MGB - Installing Pedal box
32:22
Alex's garage
Рет қаралды 3,7 М.
EP8: Clutch Master Cylinder Restoration | CLASSIC MINI 25 RESTORATION
22:26
Restoring A Classic
Рет қаралды 16 М.
1974 MGB GT Brake and Clutch Master Cylinder Installation
30:56
Jonny Wonderland
Рет қаралды 29 М.
252 MG Tech | MG Brake Cylinder Rebuild! EVERYTHING YOU WANT TO KNOW!
25:09
UniversityMotorsOnline
Рет қаралды 76 М.
Easy-peasy MG Midget hydraulic clutch bleeding
13:00
Red Scorpion 6
Рет қаралды 9 М.
Brake Master Cylinder Replacement on a 1978 MGB!
19:03
Dr. D. Explains Stuff
Рет қаралды 9 М.
MGB Clutch Master and Slave Cylinders
9:39
Steve Denton
Рет қаралды 11 М.
Мужик психанул и купил 200 Ленд Роверов
0:19
Сергей Милушкин
Рет қаралды 6 МЛН