MGBGT Starter motor Removal and Repair

The starter motor will not turn the engine over. When the key is turned there is just a click. I've dismantled the starter motor solenoid and repaired it. Subscribe for more. #madeinwem

[@victorbarrios4675]

Neil amazing job explaining how all the components work together! I don't like fixing things by being told, connect here and there with no explanation as to why. Your explanation makes diagnosing problems and avoiding mistakes so much easier.

[@Madeinwem]

Thank you.

[@ianwilliams4787]

Really helpful Neil.. I have a used motor that will spin in the vice but the solenoid not operating, so I'll take a closer look !

[@Madeinwem]

I'm really pleased that it has helped.

[@danielpluess9779]

Wow What a great description, Brilliant, thanks!!!!

[@martinhibbert1428]

Another MGB GT living in Shropshire mine lives just outside Telford a 74 on an N plate one of the last with chrome.

[@DavidUKesb]

Hi Neil. Is it possible to remove the solenoid without removing the starter motor? I think my solenoid may need replacing as it's not retracting, meaning that the cranking continues even with the key turned off. I need to identify if it's the solenoid or the ignition switch but if the solenoid I'll need to replace. Many thanks

[@Madeinwem]

Hi David. You won't be able to remove the solenoid without removing the Starter motor because the 3 screws are hidden by the gearbox back plate. Also, you may find that you have a problem with the lever that moves the drive pinion forward. Hope this helps and good luck.

[@DavidUKesb]

@@Madeinwem Many thanks for the reply.