MIATA AFTERMARKET WHEEL INSTALL (Best Guide)

[@bigpickle6424]

He has 115 subs but has better content than KZbinrs with 500k subs

[@SpiritDriven]

BIG PICKLE man that means the world to us thank you so much

[@_Chunkyx1]

9.6k now

[@mitchelll4201]

U Guys deserve more subs, love the videos

[@SpiritDriven]

Thanks man! Glad you liked them! We’re growing slowly but surely! 😊

[@Katzjp71]

You guys helped me hook up my wheel and QR, Thanks guys!

[@SpiritDriven]

Yaaaaaay happy to help!

[@FrostyBoi77817]

What is the name of the Villante steering wheel you chose? I absolutely love it!

[@DLTVergas]

whats the green wire that you connected to the orange horn connector, do I just buy that long greeen wire?

[@SpiritDriven]

Yeah just buy any wire that’s close to the same gauge size 👍🏼 Probably just go to Home Depot and get a small spoon of I THINK it’s 12 gauge but I could be wrong Just match it up 👍🏼

[@pay2playgarage149]

where’d the red connector come from? after she put the cap back on

[@bryanrodriguez5765]

Good video guys 👍 not many show how to wire in the horn or should I say “buzzer” 😂 meep meep!!l

[@SpiritDriven]

Bryan Rodriguez haha thanks man yeah this is probably the easiest way we’ve found out how to do the horn 👌🏼

[@johnstealth5398]

At 8:00 do you guys just take it together with electrical tape and it work?

[@vile4663]

7:00 bro I cannot take those wires off how can I realise it without ripping it out ?

[@Robert-lh4um]

I guess I missed the oart of the actual hub install to where the horn will still work. Did you all snip off the clock spring completely. Also you failed to wire a 3 ohm resistor for the air bag module. So much missing info.

[@chowfur]

Bro how to u only have 150subs?! Great video! I’m going to do the same to my “new” Miata :D

[@SpiritDriven]

chowfur beats me lol and nice man! Good luck! If you have any questions Dm is on IG @86goals 👌🏼

[@franco11franco]

I feel like i should be paying for this great content... nice stuff really... MORE MORE lol

[@SpiritDriven]

Thanks Franco! More comin up next week! 🤙🏼🤙🏼

[@andrewaton3353]

Deserve More subs, good video

[@SpiritDriven]

Andrewaton thanks so much man!

[@andrewaton3353]

@@SpiritDriven thanks to You 😊 have a nice day

[@samgoble1785]

For the paper clip did you wrap it behind the the hub or did you leave it in the left side?

[@SpiritDriven]

Sandwiched on the back of the wheel to rub against the hub!!

[@lvbuckeye]

Thumbs up for OJ carton! 🤣🤣🤣

[@matteovrizzi]

i've read that after disconnecting the battery it is best to wait 30 minutes before doing any work. is this correct or myth?

[@SpiritDriven]

It’s best to do this especially with newer cars For the older cars it’s not as detrimental

[@ernest4175]

Can you give me links for buy it ?

[@nickespo89]

So...is i have an 2002 NB. I had a shop install a NRG 2.0 QR and A NRG wheel. after the shop installed it My Turn signals no longer work and they said the horn cant be set up....is this true?

[@SpiritDriven]

The shop doesn’t know what they were even doing that’s sucks

[@Soulcubb]

great vid im definitely going to do this mod to my miata

[@alexgarcia9318]

do they sell these in a brown version, i have a tan interior. Just wondering thanks for any feedback or tips!!

[@SpiritDriven]

I don’t think so But check the website it might have changed

[@SpiritDriven]

Villante 🤘🏼

[@SquishCool]

I put a new steering wheel on and now my low beams are always on when the battery is connected, any ideas why this might have happened?

[@SpiritDriven]

Super weird first time I’ve heard that happen I would see what happens if you revert back to stock That’s the first thing I would check Maybe you cut an incorrect wire Once you confirm the problem is not from the new wheel then I would start diving into more diag.. maybe look into the headlamp switch

[@easbyy8691]

Real good video just would like links for the products you used

[@SpiritDriven]

Easbyy thanks so much ! And of course www.ebay.com/i/324186681742?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=324186681742&targetid=935694488066&device=m&mktype=pla&googleloc=9031146&poi=&campaignid=10876471603&mkgroupid=107964302620&rlsatarget=pla-935694488066&abcId=9300401&merchantid=114609614&gclid=EAIaIQobChMI-7n0jYH76wIVExx9Ch10VwYrEAQYAyABEgJMlfD_BwE www.ebay.com/i/303600993924?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=303600993924&targetid=935431404853&device=m&mktype=pla&googleloc=9031146&poi=&campaignid=10876471603&mkgroupid=107964302620&rlsatarget=pla-935431404853&abcId=9300401&merchantid=113740767&gclid=EAIaIQobChMI0cjG1YH76wIVQgnnCh1TswsmEAQYASABEgIMo_D_BwE

[@dizzyrider3883]

Love those tattoos

[@SpiritDriven]

dizzy rider thanks brotha! Work was done at 1st amendment tattoo in Simi Valley by Tyler. He’s a great guy 👍🏼

[@xolo.0]

where can i buy the steering wheel at?

[@SpiritDriven]

Viilante but a lot of the stuff they have is backordered

[@kennethjueves698]

Hey man! This might be a stupid question but did you remove the negative terminal or the positive terminal from the battery?

[@SpiritDriven]

Just remove them both because I can’t remember now lol 😂

[@kennethjueves698]

@@SpiritDriven sounds good man! But negative first correct?

[@SpiritDriven]

@@kennethjueves698 I do them at the exact same time personally

[@kennethjueves698]

@@SpiritDriven awesome! Thanks a lot man! Looking forward to more miata videos!

[@Urabe._x]

How u get it to pass inspection tho

[@SpiritDriven]

It doesn’t need to pass unless it’s salvage title out in CA

[@pubgspecter6705]

How did you get the airbag light to not flash?

[@SpiritDriven]

Ours always flashed because our module is broken But I’m almost positive with the way we wired everything it shouldn’t come on

[@vernishere7875]

10:50 thats what she said

[@purp7134]

What hub did you end up going with in the end?

[@SpiritDriven]

We got some universal 6 bolt eBay hub, solid steel frame 1 piece $15

[@Kappanoname]

are you not worried about being in an accident though? that airbag is meant to protect you in a crash, wish my car's SW had an airbag but it's too old for that.

[@SpiritDriven]

That 30 year old airbag will do nothing but hurt you Don’t crash ☝🏼

[@grantx2819]

Btw paint or wrap?

[@SpiritDriven]

It was wrap and then we painted it

[@dcdad556]

Great, but now your only air bag is gone. I dislike the stock wheel too. But...

[@SpiritDriven]

True but that 30 year old airbag is so old I bet the insides are just turned to gravel I’ve heard horror stories about old airbags going off and doing more harm than saving

[@vernishere7875]

11:36

[@mihaiserbanescu8676]

Best way to hate your life. The clock spring should stay in place, otherwise your airbag light will be on which will fail you your next inspection, plus it's a tone more work to have a worse experience. Complete shite! the hub nut torque is 30 nm, not all your impact can do, hence you split the plastics behind.

[@merlyn2121]

She is way too pretty for that dude.

[@SpiritDriven]

Whatcha mean

[@ragnarfpv5434]

Omg....worst vid for today...cya

[@SpiritDriven]

Yikes, looks like you keep comin back to the channel. You can write me love letters and send them to my IG if you’d like 😘

[@nickb3458]

When you booted the hub on and squished the plastic column mount, how did you fix that problem because I’m having clearance issues too that cause that

[@SpiritDriven]

Had to change the hub later on Actually going to be remaking this video If you want shoot me a dm on ig @86goals I wanna see your clearance 🙏🏼