4-jaw Lathe Chuck for Woodturn. How to Make Lathe Chuck. Woodworking

[@florianmarin3100]

Ceva educativ pentru tineri care le place noul de a construi noi mașinării.

[@mitchelperkins6723]

You have some MAD wood working skills, and an obvious eye for engineering. Very well thought out and executed build. And your use of "alternative" materials for construction is inspiring.

[@josefigueroa2696]

Pp

[@michaelmccarty3395]

Next time you want even measurement around a circle, wrap tape around so ends meet,Take tape off lay on table measure length decide even marks replace tape on round object. Perfect location for drilling holes.

[@gotzolones]

the jaw Lathe Chuck diy made of wood with more precision than I have seen. I am doing one of this type and another Longworth and well the effort is that it is accurate. Very good work

[@ken4334]

I like your laser on your bench saw,awesome project well designed.

[@MichaelPaleyAU]

👍

[@superloyaljane4255]

Awesome video I can't get ahold of a chuck that fits my lathe so this is a great idea thankyou for sharing

[@jealzuru245]

Your project is great, I will copy it and put a drill gear on it so that they all saw at the same time.

[@APlagueOnBothYourHouses]

Just awesome 👍! This is the kind of stuff I love. You were able to build something as complicated and precise as a lathe Chuck with little more than hand tools. Not even an actual lathe or a drill press lol. Your project is amazing, you should be very proud.

[@legalldavid5586]

A lot of work. Very good job 👍👍👍👍

[@MichaelPaleyAU]

Thanks mate!

[@trashcan2088]

Michael McCarty Stated, "Next time you want even measurement around a circle, wrap tape around so ends meet,Take tape off lay on table measure length decide even marks replace tape on round object. Perfect location for drilling holes." This is a grand idea.

[@sheltonsolutions]

I made this out of port orford cedar. Im smelting aluminum cans, I'm gonna use the wood chuck to make a mold in kinetic sand after adding some copper for strength.

[@hammadmughal6261]

Awesome a far clear vision to make a lathe chuck for small wooden lathe to hold smoking pipe :D

[@YuriKadirov]

Это то, что я искал. Спасибо

[@shahzadkhan-hj7qx]

Beautifull Work 4 jaw Lathe Chuck For Woodwork

[@mr.b.w.3146]

It's so nice to see jigs/tools etc. made from wood that otherwise are made from metal. Brilliant bit of kit! How you film it and make it at the same time, well I don't know. Me? I can struggle just making something! Cheers, Barry.

[@autumnknight8710]

Excellent Michael - Good work. many Thanx

[@MichaelPaleyAU]

Thanks!

[@elviorab]

Belíssimo. Uma obra de arte que exigiu criatividade, planejamento, concentração, habilidade e muitas paciência. Assistir o vídeo foi uma terapia, imagino executar. Parabéns.

[@lucvaneijbergen6797]

nice work.

[@MichaelPaleyAU]

Thanks!

[@jesushernandez6814]

Excelente trabajo, con mucha ética felicitaciones!!! desde Venezuela.

[@trashcan2088]

Also, W I Biles has a very good point, Rotational torque will ware this device out fast. Also I would have instilled some hex nuts in the holes for the jaw driver bolts to increase life usage of this tool.

[@CEZAMPOL]

That's perfect...amazing... I stood open-mouthed! Congratulation for this brilliant task !

[@andredupuis8497]

Very nice project thanks❤ for

[@hassanal-mosawi6049]

Thanks for showing how and sharing that, well done

[@walterrider9600]

thank you Michael

[@willemkossen]

That is a very clever design. Nice

[@MichaelPaleyAU]

Thank you.

[@jimwiskus8862]

Astounding job done with simple tools all free hand. Amazing accuracy. Congratulations my friend! 👏🏻

[@MichaelPaleyAU]

Thank you!

[@samterian7694]

enjoyed watching, keep 'em coming

[@bennyoliveira9662]

Really nice work..👍👍👍👍👍

[@juanmanuelmendezrodriguez364]

Hola mi más sincera enhorabuena....Es de las mejores ideas que vi para un plato de garras....Muy buena la idea ....Te felicito...

[@MichaelPaleyAU]

Gracias

[@jerichojoe307]

nice, especially since you didn't use a press for more precise drilling, best home chuck yet eeen

[@MichaelPaleyAU]

+Joseph Reese Thank you

[@igorkrstic8060]

Excellent work.

[@MichaelPaleyAU]

Thank you

[@wibiles3756]

I really like what you have made. However the jaws only have the threaded bolt to keep them in place against the twist that the work will put on the jaws. I really feel that you should have made triangular inserts between each jaw to make a working track against their sides to help keep them upright against the force of the tool twist. What do you think?

[@AlphaTroniks]

Yeah! Channels will help make the chuck become more stable.

[@nexus01gr]

Maybe your best one yet! Subscribed!

[@mcorrade]

You jig saw table is awesome. I read further and see that its also your router and table saw. Nicely done. Nicely done

[@MichaelPaleyAU]

👍

[@mariofernandes4175]

The best I've seen

[@josenewtoncostacosta8079]

Valeu colega . Bom projeto e segurança e sim muito importante. 👏👏👏👏👏

[@aaaooaao9949]

Unorthodox, aber wenn man keine Drehbank hat, mehr als Nichts und sicherlich hilfreich in mancher Situation. Hätte einige Schritte wohl anders gemacht - alleine beim Ausschleifen der Backen wäre ich nicht drauf gekommen, Das von Hand auch nur zu versuchen - Das hätte ich direkt 'auf der Maschine' gemacht - allerdings im Besitz einer Drehbank und somit vll. etwas 'vorgeschädigt', was runde Dinge angeht. Die Gewinde-Muffen sehen 'Rampa-Muffen' sehr ähnlich - eine nette Anwendung dafür! Alles in Allem finde ich die Herangehensweise sehr angenehm, auch das Ergebnis kann sich sehen lassen. Auf jeden Fall Jemand, Der Sich zu Helfen weiß! Jemand, Der eher eine Lösungen, statt eines weiteren Probleme, sieht! Ganz klar: Daumen hoch

[@AtomicShrimp]

Nice. Best design I've seen for a homemade chuck.

[@MichaelPaleyAU]

Thanks

[@ВикторФомин-ю4у]

@@MichaelPaleyAU можно размеры

[@ajosemu]

me parece practico y divertido de hacer y ademas util un buen video para los caprichosos gracias

[@MichaelPaleyAU]

Gracias

[@vjgrevem]

Nice, but I'd like this video a lot more if you showed how well it gripped a turning blank.

[@mahendrapanchal8554]

Nice vedio

[@georgetonkovic1275]

Very nice design. Can I ask, why Marine plywood not solid hardwood? Is there a plan you could share? Thank You for posting this.

[@АлександрРоманович-ж6р]

как всегда - удивляет и вдохновляет!

[@MichaelPaleyAU]

А меня вдохновляют подобные комментарии. Спасибо!

[@АлександрРоманович-ж6р]

Вот уж действительно не за что! Это вам спасибо, т.к. глядя на то, чтО вы делаете и как вы делаете, возникает желание и самому что-то смастерить. И отдельное спасибо, что делитесь всем этим.

[@fernandovaras454]

BUEN TRABAJO,ME HABRIA GUSTADO HABER VISTO UNA PRUEBA DE TORNEADO .GRACIAS .DESDE CHILE.SALUDOS

[@richardshaw3094]

Excellent work.... Great idea

[@MichaelPaleyAU]

Thank you

[@oledue9440]

Michael Paley

[@oledue9440]

Richard Shaw

[@warchateck]

رائع حقا تسلم ايدك Really hand delivered

[@anamarcia6877]

No

[@Mylittleworkshop]

Excellent work!

[@MichaelPaleyAU]

Thank you!

I agree with my man, AtomicShrimp, the best homemade chuck, I've ever seen..Cheers from Dominican Republic bro. Thumbs up and i will subscribe to your channel. Awasome Job.

[@MichaelPaleyAU]

Thanks mate!

[@Wimvanhal]

Great homemade !

[@DiHandley]

Got to hand it to you Michael, pretty damn clever. 😉👍

[@MichaelPaleyAU]

Thanks David! Nice to hear you again

[@faridmak6738]

Perfect👍

[@lpnadie9986]

...muy buen video, felicitaciones,...y gracias por compartir tu experiencia y conocimientos...

[@ramdanesaidi7598]

great job man, good woodworking, i liked it.

[@MichaelPaleyAU]

Thank you!

[@MadJix]

Pretty cool! ever try making a planetary one or a scroll chuck even?

[@lauromiranda4493]

That's a good ideia! I will make this similar, thanks!

[@ManhattanWoodProject]

Nice build!

[@pradeepmahendrasemage4043]

Nice.

[@JBirge70]

Do u have all the measurements to all that u just did? If so could i get them n steps to put all together. What wood did u use?

[@frankmaita5860]

Realy good job dude, I like this chuck and dont be mad at me but Ill copy that,, hi from Venezuela...

[@Aleksandr_Malgin]

helo michael ! very good work

[@jalmaquantin7213]

very good job !!

[@MichaelPaleyAU]

Thanks!

[@ibrahimgoma7779]

so good

[@manuelmartin3356]

una obra de arte,,en hora buena

[@petersmith5199]

Clever, but not sure if I would be brave enough to us it!.....maybe at slow speed to finish the bottom of bowls, if you couldn't afford Coles jaws, dressed in armour!

[@caitgems1]

Good job dude and excellent channel. Subbed.

[@MichaelPaleyAU]

Thanks buddy!

[@theriphraff]

what was that socket tool you used to tighten the nut?

[@woodworks3585]

Very Nice work on that chuck. It looks awesome..Thank you for sharing....Michael.....Shared.

[@MichaelPaleyAU]

Thank you!

[@CarlosEdsonMacedo]

Terry WoodCrafts 67 ñ.

[@brookswade5774]

I would like to have the plans for that chuck.

[@israelclaretisoares5522]

Parabéns muito bem feito seu trabalho.

[@MichaelPaleyAU]

Obrigado

[@РадикМухамедьянов-у4в]

При такой массе заготовки подшипники у дрели накроются очень быстро. лучше этим не увлекаться часто. А так всё отлично.

[@ryanhosein7640]

Great work Mic. I would of like to see how you attached it to the drill at the back using a 1/2" or 3/8" chuck..I'm trying to build one out of wood..

[@arturojimenez9602]

Cuales son las medias que debo tener encuenta para hacer esa copa en madera

[@F.R.PESETA]

Muchas gracias por este estupendo vídeo, un saludo desde Albacete, España.

[@MichaelPaleyAU]

Un saludo desde Melbourne, Australia.

[@neidivan1295]

Muito legal seu trabalho, parabéns!!!!

[@MichaelPaleyAU]

Obrigado

[@kevinbrister8801]

Nice job! Any chances on getting these plans?

[@ruforufo2185]

hello Michael, i have a lot of old chisels that are beyond repair for fine woodworking. do you have any thoughts on re-grinding them for turning tools? thanks, i subbed btw. :-)

[@juancarospaez2536]

seria bueno verlo como trabaja en un torno y saber si funciona.-saludos desde argentina.

[@jeffoldham3466]

be nice if you had the dimensions of the material you was cutting and go into it in more detail,,if you had a table saw why using a jigsaw,,stoped halfway,,guess im stupid,,im from the old school,,i like for the instructor to explain what he is doing and how he is doing it!!!!!

[@brianknickerbocker8518]

You know you are getting serious when Marine ply comes in.

[@sheltonsolutions]

I used port orford cedar to make my chuck

[@coburnlowman]

I give it five 👍👍👍👍👍!!!!! It would be hard getting use to a backward thread on the jaws tho. Also when truing your jaws its a good idea to first true up the center first , like put a shaft in them and indicate it before turning the steps of the jaws. What you did is still great work and I'd love to have that chuck. Being that I've never made one I'm by no means putting yours down. Having a set of jaws cast from aluminum would be awesome as a finishing touch. Or having the entire chuck aluminum casted and truing that up. I worked in a production shop as a tool and fixture maker. The lathe they had had interchangeable jaws. One of the things I'd do to keep busy was to make up soft jaws out of 6061 aluminum because lots of the turning I had was on hard to hold fixtures. By using them I never lost a heavy production fixture. I loved that job , it was bicycle riding distance from home , it paid great , the production ladies always brought me great food because I'd do my best to make anything they needed. The owner was crazy and after I threw a chair thru a window because he cursed at me for zero reason I had to find another job.

[@gerdtellermann4341]

Phil Lowman nñjj

[@walterrider9600]

sorry to hear i loved working as a machinist too.

[@AlphaTroniks]

Can we share our experiences on Google meet someday?

[@НиколайКузьмин-э8ф]

Отлично.

[@ПАВЕЛЕРЕМЕЕВ-у3ь]

grandly.Amazing

[@MichaelPaleyAU]

Thank you!

[@francobrancato8839]

Amazing work, very retailer.. a greetings from Argentina..

[@MichaelPaleyAU]

Thanks!

[@gustavoforero3778]

hola me llamo gustavo me encanto el video mil gracias seria muy chevere poder tener las medidas ya que pormasque miro el video no las tengo clara para hacer una igualita mil gracias por compartir tu saviduria dios te bendiga soy de bogota colombia

[@SalimAydin-kartonproduksiyon]

i like it... realy good job.

[@MichaelPaleyAU]

Thank you!

[@ramaroodle]

Great design but a lot of work. I think I'd just buy a chuck. :-)

[@FM-not-AM]

I assume you made a paper airplane when you were younger. If you have no adventure in building "X", you'd be better off buying paper airplanes already made.

[@jayshaw3971]

good job!!!!!.

[@MichaelPaleyAU]

Thanks!

[@mariocantarutti]

MUY BUEN TRABAJO FELICITACIONES!!!!

[@MichaelPaleyAU]

Gracias!

[@mariocantarutti]

un olacer de video!!!!!!!

[@jktransportista]

Exelente trabajo, faltó más información de hilo interior atornillado de los pernos, como se llama?, acá en Chile no los he visto, gracias muy bueno tu trabajo, saludos.

[@americosouza6199]

belo trabalho valeu

[@ИринаРуслякова-т3з]

молодец !! руки из нужного места ростут

[@MichaelPaleyAU]

Спасибо!

[@mtabernig]

how do you plan to attach that to the lathe?

[@hermesrodolfoescobarvelasq1237]

Wow, I live in Guatemala Central America and I need a any Chuch but in my country is very dificult buy this piece, now I decided make this part, Thank you for this video, My english is very Bad but , excuse for that.

[@cleitoncarlospaiva9270]

Parabéns !!! Muito bom!

[@garthrobertson4965]

Stunning job. Well done. Will plywood be strong and durable enough for this application?

[@deathbyproxy2]

no

[@sangpengembarafishing0711]

Like my friends...

[@FrancisRoyCA]

How did you manage to get a laser line on your table saw? That's only about the most useful thing I've seen in years!

[@MichaelPaleyAU]

Thanks mate! Look here - kzbin.info/www/bejne/hWe3nHqvpbVmesU

[@Rolingmetal]

Nice, but is is usable?

[@MichaelPaleyAU]

kzbin.info/www/bejne/iXXMdpttl66Iq5o

[@castherman396]

Como didactico muy bueno. Como uso y aplicacion No creo que sea seguro por el juego y la fuerza centrifuga que se crea sobre los tornillos

[@ОльгаКостенко-щ3х]

Отлично

[@MichaelPaleyAU]

Спасибо!