KLE500 few mods :)

[@laurentoutan9922]

Joli son ! Se sont les pirelli scorpion rallye que vous avez ? 50%/50% ? Ils vont bien?

[@maciejmisiewicz8049]

Gdzie nabyłeś rurę (tą giętą), która łączy niwy wydech z kolektorem?

[@twotwo8]

How did you connect the fuel gauge display? Did you have to buy a separate float?

[@LukasBoucek1]

great work, the speedometer is great. What is the liquid on the right over the cooler?

[@michal_denisiuk_adv]

Hi! this is the engine cooling liquid, normaly this is located on the left rear but i just relocate that , this one is smaller but air flow is veery high without all the original plastics:) no problem with overheat, ligt on the dash never blink's, even on the slow technical section, sand etc

[@carlosandleon]

@@michal_denisiuk_adv do you have a suspension lift on the bike? looks higher

[@michal_denisiuk_adv]

@@carlosandleon no, nothing change with suspension

[@milostrickovic6770]

Windshiels for hands ,what is that model? Look nice

[@michal_denisiuk_adv]

thanks, stock acerbis copy handguards , no name, just check on ebay or aliex

[@lukahorvat2836]

Hi, whose motorcycle is the front fender? Thank you.

[@alessandrobortolazzo5431]

Where did you buy the silencer exaust?

[@michal_denisiuk_adv]

allegro.pl chinese copy of Akrapovic

[@whoisedo7290]

Hi dude :D Great job :) Can I ask you how did you uplifted the front mudguard?? I got a KLE500 and want to do the same thing but I'm not very practical, so I'd like to have some advise and suggestions :) Thx

[@Inferniux]

He just problaby drilled few holes and tapped them, in bottom tripple clamp. And then attached mudguard with bolts or if it is not possible directly attach you need a make clamping plate witch bolts on to tripple clamp ant then mudguard bolts on to that plate

[@michal_denisiuk_adv]

excuse me for late, send me priv email and I will send you few pictures:)

[@whoisedo7290]

Michał Denisiuk here u are [e-mail]

[@Arthur-zz8ds]

Hey I'm also struggling with mounting my front fender can u please help me out , also that bash plate looks awesome Thx

[@krystianpawlata1927]

Cześć! Jakie podnozki udało Ci się tak dopasować? 🙂

[@vojtechmika2523]

which motorcycle the front fender is from?

[@michal_denisiuk_adv]

KTM EXC

[@danielfekete7999]

Hello! My name is Daniel from Hungary. I have KLE 500, and i bought an exhaust like yours. But I didn't get a middle connecting pipe. Where can I buy a middle pipe like yours? I couldn't find it anywhere, only with the exhaust. Can you help me, where can i buy it?

[@michal_denisiuk_adv]

Hello Daniel, send message to dominator.pl they have middle connecting pipes for this exhaust

[@StiloNautica]

Did you change the head angle? very nice bike

[@Jenedis]

Hi, what type of tacho is it? Was it exact fit or some modifications needed to be done?

[@zenotm]

nice bike,great job !!!!

[@tq26]

👏👏👏👏👏👏

[@domenicomontalbano7639]

Bravo👏👏👏 Molto bella

[@mikhailanatoliy9990]

This is fully stock, right?

[@mikhailanatoliy9990]

@Cross Hatch it looks fully stock tho, are u sure?

[@michal_denisiuk_adv]

@@mikhailanatoliy9990 almost stock :D

[@arkadiuszk.3898]

Wydech z Aliexpresu?!

[@kristokristo7092]

Co to za model i rozmiar tylnej opony? Pozdrawiam. Fajne przeróbki.

[@michal_denisiuk_adv]

dzięki, to jest Mitas E-09 130/80/17

[@bedik1019]

what tires do you have on your motorcycle ???

[@bedik1019]

front and rear mitas e09 ???

[@rickyjohnson514]

What's the Speedo and how did u get fuel gauge in tempted to go down same route as you

[@michal_denisiuk_adv]

fuel level is disconected, speedo from china - aliexpres

[@thePeakyDuck]

Hey Dude. Cool but wtf is with the lamp?

[@michal_denisiuk_adv]

hahaha , it was a prototype version :D

front fork is stock o another bike? thanks

[@michal_denisiuk_adv]

completely stock my friend, 10W oil and 0.5Bar on each cartridge + neopren socks, best regards

@@michal_denisiuk_adv thanks ✌🏻✌🏻

[@eirinipapa3853]

Ready for africa race!Can you tell me where you buy the protect engine plate?

[@michal_denisiuk_adv]

hello, find facebook group Kawasaki KLE500 Polska, there is a guy who create and sell this kind of bash plates

[@eirinipapa3853]

@@michal_denisiuk_adv thanks,can you know if this guy send in Greece?

[@michal_denisiuk_adv]

I have no idea, If you will have any problem with sending let me know and I will try to help you

[@eirinipapa3853]

@@michal_denisiuk_adv thanks very much!

[@motomario7094]

Taki trochę Mad Max stajl hehe :) Może się podobać. Jak dla mnie bomba :)

[@michal_denisiuk_adv]

Wiesz jak jest, wszystkie te motocykle takie podobne to chociaz ten niech sie wyróżnia:D najpiekniejszy nie jest ale w offroadzie tez nie o to chodzi - ma robić w terenie hehe wiec im mniej plastików tym lepiej a lampa szła prawie miesiąc wiec musze ją odpowiednio chronić:) dzięki za dobre słowo , pozdrawiam!!:)

[@petermanjapan2125]

Michał Denisiuk killer look! Absolutely love it. Can you please provide info for skid plate+ coolant+headlight? Also are you not bothered by your knees getting past the gas tank?

[@alphadog6951]

świetny jest ten wydech . Także rozmyślam co zrobić z moim kle 93 r ... ps. można namiary na ten wygar ?

[@michal_denisiuk_adv]

dzięki, na allegro i olx jest cała masa tych tłumików, chińska kopia Akrapovicia :)

[@domin8005]

Nie ma juz z tym adapterem tylko uniwersalne

[@martinkueppers605]

Sehr gut umgebaut, das gefällt mir sehr gut 😎 Hast du den Luftfilter auch umgebaut? Grüße aus Düsseldorf!

[@StiloNautica]

Ik heb net een 2008 gekocht.. wellicht nog wat aan doen. leuke ideeen.

[@thepredator8890]

The light is horrible, but the bike is cool, nice exhaust, but please change light lol

[@michal_denisiuk_adv]

light has been changed to Baja style , check others videos :) thanks BTW for comment :)

[@janpostrach3582]

Schöne KLE... die mag ich.

[@michal_denisiuk_adv]

thanks :)

[@borsuk321123]

Panie, jaka opona na przodzie?

[@sirrara2667]

Great vid dude

[@michal_denisiuk_adv]

thanks :)

[@pateris]

Gee, I remember that noise from mine…

[@nderezic]

Original exhaust does a better job at keeping the noise down

[@michal_denisiuk_adv]

but its mutch heavier than this and sound is not good enough :D I want to be "visible" in the city traffic, drivers must hear me before watch me :D thanks to this approach Im much safer on the road

[@pietrocima3372]

Cool!!!

[@老东门兽叔]

这条排气在中国买的吧？

[@vidojearsic6746]

Nice Frankenstein 😂😂😂

[@krzysiekm1641]

Da vorne um die Lampe sind die Teile aus einem Lagerregal

[@agataaganska1269]

Co to dokładnie za wydech jeśli można wiedzieć ;)

[@michal_denisiuk_adv]

chinska kopia akrapovicia

[@Jawsim2]

Ale ten reflektor to można było ciut estetyczniej zamocować. Te kątowniki wyglądają średnio.

[@michal_denisiuk_adv]

zobacz nowszy film, tam juz sa okragle rurki:)

[@Acian1984]

bravo

[@margag5]

Jesteś z Żywca?

[@michal_denisiuk_adv]

z Wawy

[@ВалерийМеньшиков-ю4г]

Это надо ж было так мотоцикл изуродовать.

[@michal_denisiuk_adv]

new vid kzbin.info/www/bejne/oKXbgWateatjnpo

[@ruslankhamchiev1170]

КолхозКастом

[@sebastian87113]

BŁOTNIK Z PRZODU FAJNY JAKIEJ FIRMY?