Love it, took my smooth brain a few retries watching this to get it indexing correctly, but man does this feel nice. Installed this on a 2001 castellano fango with a hope evo crankset and a KMC X10. Shifts like butter. Even on this older 26” bike it gives this amazing range to work with.
@AndrewShackleton3 жыл бұрын
I just installed this drivetrain to replace old 3 ring XTR 9 speed stuff. I am very impressed.
@microSHIFTTECH3 жыл бұрын
Have a good ride!
@isaacbrooks59993 жыл бұрын
@microSHIFT I just bought your drivetrain after watching the @hardtailparty review! I'm extremely excited to get it on my new bike!
@HacknBuild2 жыл бұрын
It's great that Microshift put these videos together. It's much more clear than a written installation manual. I upgraded my MTB's drive train from 3x7 to the 1x10 and my first impressions are that it's great! Really nice to have the clutch on there. Easy to install and adjust. Thinking about running this on my cyclocross bike too.
@ghostnappa23112 ай бұрын
For some reason shifting and setting up a derailleur has been the last thing eluding me as an at home mechanic. This video finally got me there i was able to set up thos drivetrain on a custom 1by10 build ive been working on. Last thing is dialing it in so it shifts onto the largest cog
@ansmfella2 жыл бұрын
Amazingly clear and concise installation videos!! Seen there views and recommendations on this drive train and this was the final selling point! Great work
@brendaleetv3 жыл бұрын
I just installed this set up on a customers bike and its pretty well made. Even though I have a home bike shop, I dont have a bike shop yet, but this system is pretty good.
@hunterwright3864 жыл бұрын
I feel as though this is the budget friendly and happy medium between SRAM Eagle and box prime 9
@ns671fr3 жыл бұрын
I was thinking this set is lower than box
@dmitrychuveev6610 Жыл бұрын
Without this video I would not be able to tune my advert x. Thank you ❤
@drewsmith60662 күн бұрын
Cool video chap and well put, thanks
@snowee___joey3 жыл бұрын
So good! It practically installs itself. THanks Microshift!
@wailee92432 жыл бұрын
Just installed mine and it's very simple. Shifts great!
@macualey6 ай бұрын
This is such a good installation video!
@willseawell2263 жыл бұрын
So helpful thank u so much helped me fix my brothers Santa Cruz bantam
@user-bl6wr9dx6i2 жыл бұрын
Installed. Outstanding instructions, thank you!
@microSHIFTTECH2 жыл бұрын
Glad it helped!
@cjrenteria71483 жыл бұрын
Recently bought the Acolyte set! Please post a derailleur video for that! Cool!
@unicyclefencer2 жыл бұрын
I was just installing this on my bike and was hoping this video would show me how to use the chain gap tool that it came with. Guess I will just fiddle with it.
@microSHIFTTECH2 жыл бұрын
Yah we may need to remake that video and include that. but for now check out this video for that information. kzbin.info/www/bejne/nZPFhaeYe8yCsLs
@user-xh8xm9fu7u5 ай бұрын
Спасибо тебе бро ,я настроил свои топовы переключатель одвен х
@leeuwzorgenburg87363 ай бұрын
I have a weird question - I've been running Microshift Advent X Ver. 1 for a while with no issues. When I originally switched over from my previous 10S setup, the chain length was already correct so I never had to determine it. The other day, I ordered the Ver. 2 derailleur as well as a new KMC 10 speed chain. Instead of just copying the existing chain length, I decided to use the method "2 extra link method" you and many other companies recommend for setting chain length. It's the only method I've ever used, and am very familiar with it. The first strange thing I noticed is that with an uncut 116L chain (including final quick link), the 2-link method was saying the chain length was correct without the removal of any links (about two full links of overlap). While I found that strange (knowing my old chain was much shorter, and that you almost always have to cut chains unless you have a huge chainring), I decided to try it. When I did, the slack in the smallest cog was noticeable right away - there was 0 tension to the point where the chain just flops, and yes, this is with the b-tension screw set with the Microshift V2 gage on the largest cog. While I was kind of expecting to this to happen, I couldn't in my mind wrap my head around why the "2 extra link method" wasn't working. I even have a chain length estimator spreadsheet calculator that I have used before that generally gets it 100% right (but I still do the 2 link method), so I put the numbers in and it recommended 112L, which is exactly what my old chain was. The numbers are 460mm chainstay (longest distance), 30T chainring, and 48T largest cassette cog if you care to check the math. Any website/calculator should give you the same number I got. Obviously I'm fine just cutting the chain down link by link until I hit the correct length (just to be extra cautious), but I still really want to understand what I'm doing wrong. I've used this method before with success numerous times, but now I've run into this problem and can't figure out what is going on - it's driving me nuts! Maybe you can help?
@microSHIFTTECH3 ай бұрын
Advent X Ver.2 has a different cage design than the original, and needs a different length chain. If you check out the manual on our website you can see a really clear picture of exactly how we recommend that you cut your chain. Also, all wide range 1x systems are extra sensitive to B-tension. Make sure yours is dialed in precisely according to the manual as well.
@AK-oz4ew10 ай бұрын
Have bad time with the highest gear (smallest cassette ring) making ticking noise like trying to upshift to the second smallest. Can make it to go away by loosening the shifter cable, but then can't upshift from 6 to 7. Can only fix it more or less by relaxing B limit screw when the recommended gap is not 15-17 mm, but more like 8-9mm. Playing with H screw does nothing. The worse thing is that bike jumps the chain when under high stress on the smallest cog. All new components, and what a struggle. Will try to replace 10 speed KMC chain with 11, wonder if it will help
@microSHIFTTECH10 ай бұрын
It's hard to diagnose these things over the internet, but it sounds like it could be a chain length issue. I would file a service claim on our website, a technician will get back to you to get it figured out one way or the other.
@AK-oz4ew10 ай бұрын
Thank you very much for a prompt reply. Will use your advice@@microSHIFTTECH
@ns671fr3 жыл бұрын
Really good instructions
@javomorales46864 жыл бұрын
It would be great if you had a channel in Spanish, Latin America is very happy with your products or was subtitled
@cattalkbmx2 жыл бұрын
Will the brifters work with v brakes? Should at least work with a travel agent, right?
@microSHIFTTECH2 жыл бұрын
Our drop bar brake lever/shifters use short pull actuation. You will need a travel agent when paired with standard v-brakes.
@cattalkbmx2 жыл бұрын
@@microSHIFTTECH Thanks for the response and making quality products that are affordable!
@Matt-dx3wo3 жыл бұрын
thanks, very helpful!
@c0nsci0usness Жыл бұрын
Hello, my derailleur won't shift to the biggest cog. Should I try to reseat/tighten the cable and try again from the beginning steps?
@microSHIFTTECH Жыл бұрын
That problem can be caused by a lot of things. If you haven't tried it yet, I would tighten the cable tension by turning the barrel adjuster on your shifter counterclockwise. If that doesn't work, then yes, I would try to start at the beginning with the installation instructions.
@BorKagan7773 жыл бұрын
Did you add TWO links plus connection link or TWO altogether including connection link? Thank you.
@davidcrowson47452 жыл бұрын
Thank you 😊
@abarrotebeats2 жыл бұрын
Does the deraullier needs a deraullier hanger or does it attach directly to the frame?
@shelkau_yelkau3 ай бұрын
hello microshift. after servicing the chain and installing it back, on the smallest star, the chain began to slip under load, what should I do? What could be the problem?
@microSHIFTTECH3 ай бұрын
Could be lots of things. Might be chain and/or cassette wear, might be something is out of adjustment. I would recommend bringing it to a shop or filling out a service ticket on our website.
@olafcoffey12334 жыл бұрын
I did what the video said and cut 2 links when sizing the chain but in the first gear the chain feels loose. Should I cut another link?
@microSHIFTTECH4 жыл бұрын
Please contact us at service@microshift.com and send us a picture of the setup with the chain on the largest cog. Thanks!
@bmwofboganville4563 жыл бұрын
06:00 I followed the video advice of 15mm distance but the PDF manual might have an error, page 24; "With the chain in the largest cog, adjust the b-tension screw until there is 3-5mm of distance between the guide pulley and the tallest teeth of the largest cog."
@microSHIFTTECH3 жыл бұрын
You might have the incorrect version of the manual. You can find the most updated version on our product pages: www.microshift.com/models/rd-m6205am/
@theamateur44902 жыл бұрын
I recently snapped the top of the 15torx bit screw and half of it is still in the clutch how can I dissemble it and try get it out?
@davidorellana3503 Жыл бұрын
I just replaced a derailleur hanger not because it was bent but because the thru axle threads got messed up. It was literally just a plug and play, but now the derailleur won’t shift to the largest cog. The b tension screw is now almost all the way in and it finally shifts, but what could have caused this? Is there a particular way the derailleur needs to be oriented when we attaching it to the frame?
@microSHIFTTECH Жыл бұрын
It can be hard to tell over the internet, but it sounds like the new derailleur hanger isn't in the same place as the old hanger. It may be that the old one was bent. Either way, if you followed all the directions carefully, especially getting the correct chain length, then it may just be that your bike needs the limit screw to be almost all the way in. If it's not working right, you can fill out a service ticket on our website (and send a picture), and our tech can take a look at it.
@lampshade89693 жыл бұрын
Do you have a bar end shifter that works with this derailleur? I would get the drop bar shifters, but I want hydraulic brakes.
@AGuySomewhereInTheWorld3 жыл бұрын
Will a SRAM PC-1031 chain work with Microshift Advent X Groupset?
@raulespinoza58194 жыл бұрын
@microSHIFT can use a Sunrace csmx3 (10 speed 11-42T) with this derailleur?
@DazzzTube Жыл бұрын
Hi. No matter what I do, my advent x derailleur won’t shift down into the lowest gear. The only time it does is when the cable has no tension, I add tension in order for the gears to shift up, but then they won’t shift down no matter what. To the point where I can only get it down to the third from last! Any advice? I’m loosing my mind here.
@microSHIFTTECH Жыл бұрын
This can commonly be caused by cable friction. Doublecheck to make sure nothing is clamping the cable housing and that it is properly lubed. The other potential cause is chain length. If checking those things doesn't help, get in touch with our customer service folks by filling out a service request on our website and we can take a look.
@Yevhen_Iziumskyi2 жыл бұрын
How upgrade my Cannondale Topstone 4 to 2*10 with Advent X!?
@bikechowfun Жыл бұрын
Hello sir is there a guide how to install this group set with a gravel bike set/shifter brake set? Thanks
@microSHIFTTECH Жыл бұрын
Yes, just follow these directions but check out the install instructions for our R series road shifters instead of the flat bar shifter in this video.
@MsLaLa1404 Жыл бұрын
I am 6’ tall will the 27.5” fit me?
@2001MBKBooster4 жыл бұрын
Is this a new 10-speed Advent system? It looks like one!
@hunterwright3864 жыл бұрын
correct
@bikechowfun Жыл бұрын
Hello sir! Another question, does microshift advent x is compatible with 3x10 setup? Thank you so much! 😊
@microSHIFTTECH Жыл бұрын
Nope, not compatible with a triple. The idea is that the cassette has a wide enough range that you don't need more than one chainring on the front. Still, some folks love a triple and we're not going to argue with them!
@bikechowfun Жыл бұрын
@@microSHIFTTECH thank you very much buddy! 😍
@robbwilliams78853 жыл бұрын
Microshift, this video is very helpful but it's outdated. Your current rear derailleur is slightly different. Any plans to update the video?
@microSHIFTTECH3 жыл бұрын
This video should be updated. What did you notice that is different from your current derailleur?
@Dziku8882 жыл бұрын
Will it work with Sora brifter?
@JonLIsALoser3 жыл бұрын
Do you need this to run your rear cassette 11-48 10 speed?or can you reuse you old 10 speed derailer
@microSHIFTTECH3 жыл бұрын
Yes, you will need ADVENT X derailleur to work with the ADVENT X 11-48 cassette. You can email us for more questions!
@bikechowfun Жыл бұрын
Hi, what is the setting of barrel adjuster on the shifter before you installed the shifter cable to the rear derailleur?
@microSHIFTTECH Жыл бұрын
There's no set setting. It's better to have turned most of the way clockwise (the shortest setting) so that as the cable housing gets seated in, you can add a little bit of cable tension by turning it counterclockwise.
@bikechowfun Жыл бұрын
@@microSHIFTTECH then i will just turn it clockwise until i can't turn it anymore right? Just for confirmation before i install mine 😁
@cmculver4 жыл бұрын
If I'm using the Advent X cassette and derailleur, and upgrading from a 2x8 to a 1x10, will I need a hanger extender?
@microSHIFTTECH4 жыл бұрын
Hanger extender is usually used to extend the derailleur's capability beyond its spec. In this case, ADVENT X cassette and derailleur are already designed to work with each other, so no extender necessary!
@cmculver4 жыл бұрын
@@microSHIFTTECH beautiful! thank you!
@alonsotravezanbarrenechea43832 жыл бұрын
Compatibility 2x10?
@unknownuser399993 жыл бұрын
I have bought the advent x system but is hard to shift. Shifting perfect and nice but is hard to upshift one gear. Can you help me?
@microSHIFTTECH3 жыл бұрын
Hello! It is important to adjust the b-limit screw so that there is 15-17mm of space between the guide pulley and the largest cog.
@unknownuser399993 жыл бұрын
@@microSHIFTTECH Is correctly adjusted I dont known what am doing wrong. Even with off clutch is hard to shift
@Falket19733 жыл бұрын
Do you need a spacer for 10 speed cassette mounted on the freehub 11 speed ??
@microSHIFTTECH3 жыл бұрын
Depends on if you have a road or mountain 11 speed freehub. If you have a road 11-speed freehub, you will need a spacer.
@MrSparkyss4 жыл бұрын
As for chain sizing, The video says add to whole links, but every other video I watch says add just two rivets of length, is this something specific for this drivetrain?
@microSHIFTTECH4 жыл бұрын
Actually, both would be fine since it will be within our design tolerance. This is actually not specific to our drivetrain, modern drivetrains are all using longer chain lengths these days.
@MrSparkyss4 жыл бұрын
microSHIFT awesome thank you
@mattmonroe56803 жыл бұрын
Well now I know why my chain is skipping it's obviously too long with my chain in the smallest cog my derailleur is full retracted back with no spring tension it
@bmwofboganville4563 жыл бұрын
The pulley wheel is hitting the third largest gear, are other people with Advent X using hanger extenders?
@microSHIFTTECH3 жыл бұрын
You shouldn't need hanger extender. Just to confirm, are you running the derailleur with a ADVENT X cassette?
@bmwofboganville4563 жыл бұрын
microSHIFT Yes, all Advent X derailleur, shifter & 11-48 cassette. I hadn't installed the chain yet, but tested the shifting and it was clashing with the cassette
@microSHIFTTECH3 жыл бұрын
@@bmwofboganville456 That is normal. Modern 1x drivetrains' rear derailleurs actually move the guide pulley out of the way when you shift. This design makes sure that the derailleur offers optimal performance with wider range capability. Once you install the chain and set the proper B-tension, this problem should go away by itself.
@bmwofboganville4563 жыл бұрын
microSHIFT Thanks
@IRELAND_SAYS_NO2 жыл бұрын
Anybody know what the switch on the derailer does
@sixties003 жыл бұрын
Is the Advent X derailleur compatible with 10speed shifters from other brands???? I have the cassette and derailleur but I cannot find the shifter...
@billadams86813 жыл бұрын
A little late for you, but may help someone else. I have their 11-48 cassette and derailleur. It works with a Shimano Deore shifter on my son's Hawk Hill 1.
@findtherightbeat3 жыл бұрын
@@billadams8681 How is the cassette doing so far? Thank you
@billadams86812 жыл бұрын
@@findtherightbeat Sorry it took so long to reply. The cassette still looks/works good. He has probably averaged 15 trail miles a week since your post. That doesn't include riding almost daily around our house.
@krvacker4 жыл бұрын
Can i fit this derailleur to a standard hanger (not direct mount) or do i need to fit an adapter of sorts?
@microSHIFTTECH4 жыл бұрын
All of our derailleurs go on standard hangers. There is no special standards there. No adapter is necessary.
@gefersoncavazin5743 жыл бұрын
Compatível com relação 2x10?
@RoyDangerMoney2 жыл бұрын
How many extra inner links for a hardtail?
@microSHIFTTECH2 жыл бұрын
Two extra inner links for a hardtail.
@RoyDangerMoney2 жыл бұрын
@@microSHIFTTECH Thanks guys!
@findtherightbeat3 жыл бұрын
What would be the best chain to use with the Advent X cassette? Thank you
@microSHIFTTECH3 жыл бұрын
Our cassettes are designed to work with all chains! Some chains will work better than others. Many of our OEM partners run KMCs.
@findtherightbeat3 жыл бұрын
@@microSHIFTTECH Thanks! Do your OEM partners run the X10 equivalent or the X11? Sorry if the question seems silly but others on the forums claim that theirs shift with the narrower chain
@microSHIFTTECH3 жыл бұрын
@@findtherightbeat 100% you should run X10 chains. The difference between 11 speed and 10 speed chains are the outer width of the outer link plates are narrower. This means 11 speed chains can work on 10 speed systems in general, but will shift slower. For any additional question, please send us emails service@microshift.com
@findtherightbeat3 жыл бұрын
@@microSHIFTTECH Thanks!
@tayorsnr813 жыл бұрын
Can this be use on E-Bike?
@microSHIFTTECH3 жыл бұрын
Yes, be sure to use the steel version cassette CS-H104 11-48! The lightweight aluminum version is not designed for ebikes.
@tayorsnr813 жыл бұрын
@@microSHIFTTECH Thanks a lot
@kevfullo Жыл бұрын
4:32
@ananthkutuva37484 жыл бұрын
6:02 Really? I'm used to 5 to 7mm
@microSHIFTTECH4 жыл бұрын
Yes. Most modern wide range derailleurs like SRAM and Shimano's 12 speed derailleurs require a further pulley distance. The shifting performance is actually optimal for this updated design.
@jimheitzman4 жыл бұрын
@@microSHIFTTECH I'm having problems finding this group set. Where can i buy one?
@hunterwright3864 жыл бұрын
Jim Heitzman same
@brennangandy4 жыл бұрын
@@jimheitzman I just ordered mine through worldwide cyclery. $175 for groupset and a sram chain!
@xrated_3 жыл бұрын
On 1:00 you can see that there is too much distance on tension washer which has only contact to the edge of the lip and will result in ton of wear on the hanger. This is not a good design.
@microSHIFTTECH3 жыл бұрын
Thanks for the feedback. We have changed the design since this video was released.
@xrated_3 жыл бұрын
@@microSHIFTTECH Why did you chose such large distance in first place? Only because SRAM is doing it? I dont see any technical reason to do so.
@microSHIFTTECH3 жыл бұрын
@@xrated_ The distance is to account for the cassette jumps between cogs. This will prevent the guide pulley from interfering with cogs during shifts. Our cassette shifting ramps and shifter cable pull are designed to account for this. If setting the distance to less than the specified distance, you might see noises from the chain and ghost shifting. The guide pulley will also interfere with cassette cogs during shifts.
@xrated_3 жыл бұрын
@@microSHIFTTECH i meant the distance on the tension washer, also known as B adjuster
@microSHIFTTECH3 жыл бұрын
@@xrated_ Yes, the previous comment is exactly the technical reasons why the b-tension screw needs to be more screwed in.
@user-bb5jr7nn5c3 ай бұрын
terrible explanation(
@luxuryviplifestyle94944 жыл бұрын
Great and Thank you So Much and We get in to 5G internet now So we need videos in Real Best Full 4K 240fps Resolution quality and also The Sound system in Real Best Stereo Full HD Resolution quality clarity 3D surround , soon please .