MICROTECH ULTRATECH GETS Ti SCREWS + DISASSEMBLY & MAINTENANCE - NO MORE SPRING SOUND!

[@SpecterSeventy2]

I’ve done this “anti-spring-ting” on a few on my Microtechs myself. If I could give some un-solicited advise, I’d say you don’t need to use as much white grease. A 1/4” long dob of it in the middle of the spring will do the job nicely. If any portion of the grease is touching the spring, it dampens all of the spring resonance. Also, I was a little scared for you on the disassembly. When the blade is either locked open or closed, there is a small amount of tension on the main spring. With the top cover off the knife, it doesn’t take much for the track to go flying out of the main body and either damage the track hitting a hard floor or losing one of the two launch springs. Always best to disassemble any OTF with the knife in the “off track” middle position so nothing is under load when the knife is opened up. Very nice Bugout btw. 👍

[@jensen_2261]

Really like the video! I was happy to see a relatively new vid on a disassembly. If you look at a newly manufactured Microtech knife and one made about 2-3 years ago you'd notice a big difference in the leg mounts and X button. Which is the reason why I wanted to see a new one. I work for a company that manufactures them with a newer process of Metal Injection Molding. Anyways, thank you again! Just happy to see our parts in the final assembly.

[@mikemike0000]

What a beautiful set of knives! The Ti screws really make almost any knife better!

[@jimmint5672]

That edge on your benchmade looks sick af!!!

[@jeremyspaulding7735]

That's a very cool upgrade! The blue gives a nice pop. Great video brother 👍

[@darkhorsezulu4953]

Thanks for all your stuff that I need

[@JMBAmericanIronShallNotBeInfri]

Love the new screws with the black handle, and beautiful Benchmade!

[@BLADESANDFADESOFFICIAL]

Thanks brother!!

[@greyman1363]

I took a needle and thread 🪡 and lube the thicker gage string down the spring and it works to permanently stop spring sing . I actually used a rc car pull start from my HPi savage . It fits right down and I clip it enough to just stay in place and don’t affect the spring at all it’s actually quieter than my other microtechs knifes .

[@DV77737]

That new hardware looks amazing

[@GhostRiderUSA]

Looks good Sean!

[@Antimatter.]

Thanks Sean , I have a microtech UTX 85 that has cheap spring sound , That looks like a good fix

[@BLADESANDFADESOFFICIAL]

You’re welcome! And yeah brother, so far so good!!

[@dennisjaros3345]

Nice looks great im tring to find a blued titanium glass breaker & blued titanium clip ..i can find the screws! but not a blued breaker/ clip

[@kevinbrockert3090]

Love it, put the same screws in my microtech ultratech ☠️

[@12345678927164]

Love these screws but wish MT themselves would make some available. I know a lot goes into their custom worked screws

[@davidpatterson6589]

i got the bit to take out my screws on amazon and got it next day. i want to get some proper oil and grease for my ut but all i had was gun oil. it worked but is a bit slow on the opening until it gets lubed everywhere internally it can and wipe off excess i see on the blade. thanks for the video and God bless you

[@BLADESANDFADESOFFICIAL]

Hey brother, I’ve personally tried just about ever type of lubricant and honestly wd-40 or rem oil seem to be the best way. Just spray it down into it and keep firing it and fling out the excess. Gunny Magic also does well and normally Id say Gunny products are superior but tbh I didn’t see any real benefits over wd40 (with this specific one).

[@BLADESANDFADESOFFICIAL]

When it comes to microtechs, some of them just never really achieve a good action. Sometimes they are just pretty stiff no matter what you do.

[@BLADESANDFADESOFFICIAL]

You’re welcome, God bless you as well!

[@southpaw_knives]

I wonder if the grease on the spring will attract dirt and lint to it and gum up the actions.

[@BLADESANDFADESOFFICIAL]

So far so good, no problems yet! It probably depends on the environment you use it in though. If I was in a dessert I’d probably avoid it but for me it works great!

[@headoak3791]

What are those screws called?

[@greyman1363]

I don’t trust the titanium screws. They look good , but I fear they break . Do they lay the same way as the original screws ? It’s prosthetic camera glair on the blue screws but they look to not go as deep and lay flat on the top chassis scale . They do sell the blue glass breaker to complete your build

[@dennisjaros3345]

I'm wondering the same been looking for real blued titanium glass breaker and the clip and screws but I can only find the blue titanium screws ...

[@aya8604]

Hi if I have a Exocet and mini troodon what bit would I use?

[@ckdunahee4478]

Great video, just a thought, maybe it would keep the other parts cleaner if you took the spring off then greased it😀

[@BLADESANDFADESOFFICIAL]

Yeah you’re right but it all spreads around anyway the more you cycle it so it seemed like a pointless extra step to me. Its still going strong though! Haven’t disassembled it or cleaned it since and it’s still cycling beautifully! This Protek white grease is designed to have good adhesion to the surface you put it on and minimum drag and it seems to do both of those things extremely well. I use it on the gears of the rc cars I race competitively and it really doesn’t gum anything up. Definitely not your average white grease!

[@nenadcubric2663]

Just orderd the tool and fror the Glaasbreaker screw from ebay

[@benjimilam2398]

Can you get those screws tight or will they strip like the other ones

[@BLADESANDFADESOFFICIAL]

Yup, still have the same screws in it and they have never came loose.

[@casualtactician9537]

I feel like you left some cotton in there by the spring but I need one I just can’t buy one online I guess unless it’s in my state

[@BLADESANDFADESOFFICIAL]

This is the only time its been apart and I’ve been using it ever since with no problems so if I did, it doesn’t matter lol.

[@BLADESANDFADESOFFICIAL]

I don’t think theres any states that online knife dealers don’t ship to. You won’t find them on ebay or amazon and it might not be legal to carry in your state but I guarantee you can purchase one and order it straight to your house!

[@mjk4378]

Where did u get the screws? I wanna get some gold ones

[@BLADESANDFADESOFFICIAL]

Etsy, they are ok but they stick up a little bit so you can feel them compared to the factory screws

[@greyman1363]

Lithium grease is the best for spring sing

[@mr.mduweit8926]

How inget this Titanium screws?

[@BLADESANDFADESOFFICIAL]

@@mr.mduweit8926 I ordered them off of Etsy as well as the special tool

[@JMBAmericanIronShallNotBeInfri]

Does opening a Microtech void the warranty? "We understand that some customers may prefer to maintain their own knives. Sharpening your knife does not automatically void the warranty. The warranty will remain in effect so long as the blade is not improperly sharpened and the handle is not damaged or stripped due to disassembly, determined at our discretion. Sep 7, 2020" MICROTECH So yes you can take it apart as long as you're not an idiot!

[@BLADESANDFADESOFFICIAL]

Nice to see that they updated it but yeah I agree! If you know what your doing there’s no reason for them to even know you ever disassembled it in the first place. However Id still do whatever I want to do with my knives regardless. I’m not the kind of person that sends things back when theres a issue. Ive always fixed things myself, if I can’t figure it out then ill do some research or keep trying till I figure it out. I’ve never sent anything in for warranty knives or otherwise so I could care less personally. I do think its a good thing for companies to stand behind their products though and reasonably honor claims for the people who aren’t as much of a do it yourself’er or mechanically inclined!

[@nenadcubric2663]

Does the tool fit exactly?

[@BLADESANDFADESOFFICIAL]

The one i got did

[@greyman1363]

Why carry all them on your key ring 😵‍💫 . Understand Carrying one but not all three

[@OTFCOLLECTOR]

Why does this video make me sleepy?

[@iamnoone6607]

the screws cheapen and unclassy the knife. imo

[@BLADESANDFADESOFFICIAL]

Everyone’s entitled to their opinions

[@DeuceDime]

This isn’t a full disassembly. I got sand in mine and need the whole thing taken apart. Don’t know what to do