MIDSEASON KART REBUILD - Margay Ignite K3 Briggs LO206

Bobby Krug and Greg Dingess tear the #51 down, fix the problems and perform the regular maintenance tasks, including clutch and carb, on the Ignite K3 with Briggs LO206 engine.
SHOP shop.spreadshirt.com/atanetwork/
GREG YT / @gregsvideogarage
GREG INSTA / gregsphotogarage

[@ATAnetwork]

What topics would you guys like to see in future videos? We're happy to discuss more maintenance and even dive into race craft! Let us here your thoughts!

[@MZigaitis]

This should DEFINITELY be a series. Obviously, I'm not in Ignite yet amd I will be a 1-man team, so this was immensely beneficial!!!! Thank you Lord Dingess and King Krug!

[@DaylightDigital]

This is really helpful, thanks for the breakdown

[@Chris.J.A.B]

Really enjoyed this! Good job, thanks! VLR Master 100cc

[@emeryjohnfrazier]

Thankyou!! I'm getting started, appreciate the wisdom.

[@petertodd24]

Great video guys, I've watched a lot of Briggs LO206 videos (I am starting my first season this summer) and this was one of the best I've seen. Hope you guys put out some more! Caster/camber would be good to explain to a newbie, cheers!

[@ATAnetwork]

I'm trying to get Greg to invite me back over to the garage... hopefully soon! ;) Thank you!

[@gynn4622]

No shit I got a Pepsi commercial 2 seconds after you said Pepsi lol

[@ATAnetwork]

Pepsi is paying Greg for advertising, confirmed.

[@johnnyturbo8460]

I like it, nice video. My only no no, IMO is, don't use WD40 to clean your clutch. It's a lubricant/cleaner. So it will leave a film on the clutch. Possibly affecting engagement. Brake cleaner is a better go-to IMO

[@mikaui593]

for the clutch he is using the manual says use wd40

[@johnnyturbo8460]

@@mikaui593 that's wild.

[@adamgibson9357]

Greg... that's a nice shirt!

[@Derrick_Rucker]

Super helpful for a new guy getting into the ignite class. Looking forward to starting next week, what blue grease was that Greg put on the clutch bearings???

[@ATAnetwork]

I don't think it was anything special, just some regular bearing grease.

[@strhhswgter]

Great video!!! When you were going through the clutch you said when tracks are super intensive you need to replace the springs every 2-3 races. What do you mean by super intensive? Thanks!

[@ATAnetwork]

Thank you! The factory setup is 2 black and 2 white springs. As the springs wear out, the engagement RPM drops so to ensure that we're getting the right engagement RPM, we must change out the springs. A track where you're reengaging the clutch frequently will wear out the springs faster.

[@Machobuck1317]

Got any pointers on someone that wants to get into racing?? Never raced before should I start with a lo206???

[@ATAnetwork]

I'll be making a video soon with some tips on how to get started in racing!

[@globalforcekartsport6531]

What was the measuring device Dingess used to measure the float height?

[@ATAnetwork]

Fancy man float gauge. Could use any measuring device that’ll go to thousandths of an inch.

[@StacyODell]

for all the loose bolts, would you recommend blue loctite?

[@ATAnetwork]

That's a good question. I'd say there's probably a reason why we don't already use Loctite. I'm gonna ask Greg and get back to you.

[@ATAnetwork]

Greg says "I guess you could. We typically only use it on stuff that spins or generates heat." Might be a smart move!

[@invisiongarage]

Where did you get the picture of the Supra in the background?

[@joseph22131]

where are y’all located

[@ATAnetwork]

St. Louis, Missouri!

[@fatherfruit]

it’s red