✨ MIELE DISHWASHER WON’T DRAIN - FAST - EASY FIX ✨

[@thechiefterryroy7893]

Thanks 😊

[@QuickAndEasy5MinuteAppliance]

You’re welcome 😊👍

[@simonemartini3017]

Interesting although is a miele they removed the salt container for water softener, only in the USA

[@nicholasmason8302]

Thanks - did the trick on my G4420SC 👍

[@QuickAndEasy5MinuteAppliance]

Awesome 😊👍

[@joaocoelho7331]

Great video! I have a G2470 that drains during cycle but gets stuck at the end with 1 minute showing and won’t drain, and won’t stop running. Any ideas?

[@QuickAndEasy5MinuteAppliance]

Can you unplug it and then remove the two panels from below the door and sponge out the trapped water from the drip tray?

[@joaocoelho7331]

@@QuickAndEasy5MinuteAppliance thank you! I will try that.

[@steveandsheilalauder8261]

Replaced the one way valve, still get water build up after running a few loads - have to bail once a week. Any ideas?

[@QuickAndEasy5MinuteAppliance]

Hey Steve, Just need to replace the fill valve. It’s letting a little water creep in.

[@steveandsheilalauder8261]

@@QuickAndEasy5MinuteAppliance Thx, i'll research where to find it.

[@steveandsheilalauder8261]

@@QuickAndEasy5MinuteAppliance Ok, Scott. I replaced the fill valve. The drain/intake light came on after the first run but it began with the bases loaded so to speak. So I bailed the water out and finished with a dry towel and all seems to be good now. The drain/intake light hasn't come on since (about 2 weeks). Thanks!.