Adobe Audition Dynamics vs Dynamics Processing

[@MikeRussell]

🚨Attention ADOBE AUDITION, PREMIERE PRO & AUDACITY Users!!! 🎧🔥Unleash your audio creativity like never before with my NEW audio presets! mrc.fm/presets 🚀✨ Say goodbye to the hassle of handling challenging audio and hello to mind-blowing jingles and flawless voiceovers. In ONE click! Experience the power of GREAT sound at your fingertips. 💯🎚Together, we can make magic happen! 🙌🌟

[@marklongchamps6741]

Thank you sir. I use dynamics processing cause that is what you told me to use in an earlier tutorial! I use all my effects in multi track and not in the editor that you use because I do not like to render the audio because I can't get the original back if I need to. I like using the curves they just make more sense to me but I will try to use dynamics now. Four years ago I had never mixed audio. Now I do all the time thanks to your tutorials. My mixes on a project was so good I actually got more work because of it so THANK YOU!!!!! My clients just love how my videos sound now!

[@MikeRussell]

So glad to hear that Mark. Keep up the good work

[@TarunLakhera]

You're truly an Audition Wizard.🙌🏻

[@MikeRussell]

Thanks Tarun

[@dorinrus1971]

A simple lesson, but an effective one. Thanks, Mike!

[@MikeRussell]

👍

[@jamespatricksinger]

As always fantastic mate you have made a huge difference to my music thank you

[@MikeRussell]

Thanks James

[@TheBlindBard]

Dynamics and Dynamics Processing is truly an amazing asset in the Adobe Audition effects rack when perfecting recordings to make them sound their absolute best! I love your videos, mate. Cheers.

[@MikeRussell]

Thanks

[@TheBlindBard]

@@MikeRussell You're very welcome, Mike! You should look into starting a Discord community for our subscribers. I'd definitely join.

[@MikeRussell]

We do have a free community if you’re looking to join community.musicradiocreative.com/

[@MyTerryw]

I use both, processing to duck the music and dynamics noise gate set to the amplitude statistics scan value of the average rms. Both learnt from your good self, along with so many other great tips. Many thanks for all you do.

[@MikeRussell]

Thanks for your kind comments

[@aafganisurvivor1450]

Good one Mike👏

[@MikeRussell]

🙏

[@SitconOfficial]

do a lav mic video as most creators use lavs to record audio

[@MikeRussell]

Lav mics have their uses but you'll find a lot of content creators use full size mics

[@audioelitist3677]

After the loudness wars, I die a little inside when people say, "compressor". It's not you, and I know there are plenty of legit uses for compression. It's just a "trigger" for me or something. Great video.

[@hassansadeek5207]

Excellent content, thanks for your efforts

[@MikeRussell]

🙏

[@BillyNguyenOfficial]

Your audio speaking and effects processing sound great. Can you set up a preset for me in Adobe Premiere? So I can record my voice and put your presets into the audio clip I just created? I'll pay for you. thanksI see on your website there are so many Adobe Premiere presets and I don't know which one to buy. and how to use them

[@MikeRussell]

Thank you for your kind words! I have presets at

[@jechojoven5185]

Hi can I also use the same dynamics processing method onto a song?like all instruments already mixed then put the vocals on top of it?thanks

[@MikeRussell]

You can apply the same but you'd want to apply it to the vocals only and then master the final mixdown of the song.

[@pastorrandy]

Hi Mike, love your channel and your videos. You're my "go to" man for all things audio. I have a specific question. I have a Shure SM7B going into a Cloudlifter. From the Cloudlifter I'm going into channel 1 of a Zoom Podtrak P4, and from there into my computer. I have a gain boost activated on the P4 which gives me my audio signal. My dilemma is that I use this setup for podcasting and for recording ACX files. The noise floor for ACX is a minimum of -60. If I set the gain on the P4 low enough to meet that threshhold, the audio signal in audition only goes to about -15 to -12, this seems to be too low for my podcast. If I increase the gain on the P4, I produce a higher floor noise. What approach would you take to resolve this issue so that I have sufficient volume for my podcast and but not an excessive floor noise for my other recordings? Thanks.

[@MikeRussell]

Thanks for your question! It sounds like you're dealing with a common challenge. I’d recommend experimenting with your gain settings while using a noise gate during editing to help manage that noise floor for your ACX files. You could keep the gain on the P4 set low enough to meet the ACX noise floor requirement and then use post production techniques to boost the audio signal for your podcast. Things like a limiter or compressor to increase the volume without raising the noise floor or use noise reduction tools to clean up any noise.

[@NonMatura]

THANK YOU SOOO MUCH!

[@MikeRussell]

👍

[@googlyzer547]

So i noticed in a past video you did for noise gates you scanned the audio to find average dynamic range, and bumped the threshold to that number. In this video i get its not a noisegate tutorial but i noticed you only touched the "hold" and bumped that up. Wondering what the go is there

[@MikeRussell]

In the past video, I focused on using a noise gate to reduce background noise, but in this video, I specifically wanted to demonstrate the differences between Adobe Audition's built-in Dynamics effect and dynamic processing, hence the focus on adjusting the "hold" parameter.

[@andrebernier]

This is SO SO GOOD! IO was going to ask you about how I reduce the sound of my breathing in between phrases… but sounds like THIS is where I need to do this! Incidentally, Mike, is there a way to “tweak” the settings on the male voice in your presets? I bought them last week, love them, but can’t seem to tweak them (to reduce the volume of my breaths). Thanks!

[@MikeRussell]

You can tweak any of the elements on the presets but I'd suggest taking a copy and working on that in case anything goes wrong

[@yaraassadnejad]

Great content

[@MikeRussell]

Thanks

[@balasingam1017]

Interesting 👌❤️

[@MikeRussell]

👍

[@aadilsohaib2636]

Please tell me which version of adobe audition you are using?

[@MikeRussell]

I always keep Creative Cloud suite up to date so this would be the latest available version, CC 2021

[@aadilsohaib2636]

@@MikeRussell thanks Mike

[@aktuyanpar]

Thank you

[@MikeRussell]

👍

[@hassansadeek5207]

In the Arab world, we lack professionals like you. If we dub your content into Arabic, you may get many new followers.

[@modernmedia5005]

I agree with you

[@hassansadeek5207]

🌷🌷

[@MikeRussell]

Thanks for your suggestion. I'm sure there are professionals in the Arab world but in the mean time KZbin does now provide subtitles in a variety of languages

[@hassansadeek5207]

@@MikeRussell KZbin offers subtitles, not dubbing, and the translation it provides is not accurate

[@firecaps3140]

why dont i get the side chain when doing it in the multitrack?

[@MikeRussell]

Have you followed through and set it up correctly?

[@firecaps3140]

@@MikeRussell well yes...even watch your video at least 3 times just to make sure...& i even rewind some sections of the video to have the same options as illustrated in your video...but when i go to the effects rack to set up the Dynamic processes...it just doesnt have the side chain icon at the upper right corner...next to the other 2 icon :( I Also have questions about the zero crossing commands in adobe audiotion and other than a russian has explained it...if you want i can forward you a link lmao

[@MikeRussell]

Have a look at this video kzbin.info/www/bejne/d2iYo4ZvpL2Cm68 which shows how to set it up

[@firecaps3140]

@@MikeRussell I saw the video but think i misslead you when i said "side chain" what i really was talking about was the icon in the dynamic prossessing (at the upper right corner that when selected/clicked in turns yellow and when fully side chained it turns green)... thats what i dont have...even tho i have the same settings applied here

[@ksmgmedia]

what is this wizardry?1?

[@MikeRussell]

There are lots of videos covering the older dynamics processing options and newer dynamics options which will hopefully help you out.

[@ksmgmedia]

@Mike Russell you're a legend my friend. Keep up the good work 👏

[@MikeRussell]

Thank you

[@ReportAl]

excellent

[@MikeRussell]

Thanks

[@fereshtehmohammadi26]

👍👌👌💖💖

[@MikeRussell]

👌