How to Paint Interior Trim Pieces

[@ronaldboutan2511]

Your videos are exellent. You stay on the subject and you dont waste time.

[@milanmastracci]

+Ronald Boutan Thanks Ronald :)

[@TupacAurelius]

+milanmastracci Is that your real voice? You sound like a 14 year old lmao

[@TupacAurelius]

Just kidding

[@milanmastracci]

LOL Listen to me at the beginning of the video.. I sound WAYYY younger than 14 lol Don't ask me why ahah

[@samdish7036]

+milanmastracci why ? Just kidding buddy, but hey.. It's kinda complicated, how much do u figure you'd charge to do it all ?

[@Unknownmanufacturer]

One of the best DIY's I've seen on youtube. Information rich, clear, thorough and well presented. Great job. I look forward to seeing more videos of this quality.

[@milanmastracci]

+Jonathan Chung Thanks Jonathan for the nice works :)

[@mitshylebrun2205]

@@milanmastracciis it best to get the paint with the gloss mix already or get the color and gloss separately

[@littledaniels1083]

My love did this to his Charger, and it look so Amazing! Red is definitely a fun attractive color.

[@vaggelissideris10]

Why to do all this job for a phone charger?

[@psdaengr911]

If 600 grit or equivalent scotchbrite is used, primer isn't needed to "fill grooves", just for paint adhesion. If the painti is scuffed instead of aggressively sanded, it can be repainted without priming using the same type of pain, just as you would co!orcsand an exterior finish beween coats. In this case, care must bde taken to limit overspraying the edges of the parts, as buildup may cause a tight fit and lead to chipping. If sanded down to bare plastic, you have two other options. Duplicolor has spray paint specifically designed for painting plastic. Several companies make vinyl paints aka dyes to match a wide variety of interior auto finishes.

[@Lunababy9986]

Thank you for this! I really want to re-do the interior details of my car and this was incredibly helpful.

[@TheRocketbob22]

Great job Milano. I did this on my dash and a few select pieces in yellow over gray in 2005, it is 14 years old. Still looks better than good. I may redo it because better products are avaiable today than 12 years ago. A quality paint, good color coordination, makes your vehicle uniquely yours, and I am 50 years older than you.

[@Jfresh55]

a week later, you finally can move on to the next trim piece

[@MickeyMaguire]

Wow! A young man who is articulate and thorough! Well, well done young sir, WELL DONE!

[@michaelmaclane5004]

Fuck off, boomer. NO ONE cares what your worthless generation of self absorbed half wit's thinks about them, or anything else, for that matter. Your praise means absolutely nothing, your criticism even less. Wanna know where you rank in all of that? Probably not, lol.

[@codeyhanna767]

Thanks mine were silver and now black. black tahoe with black trim and leather. Looks great. Thanks to youtube and vids like yours I've done a ton of mechanical work

[@TheHyena-ru8bz]

One of the most thorough and excellent KZbinrs to exist!

[@AIHurrell]

This is the first video I've seen by you and I must say it is quite impressive. Good production, and you get straight to the point without any unnecessary waffle. I've subscribed and will have a look through what else you have already - thanks for the upload :)

[@milanmastracci]

+Cookeh Thanks buddy!! :) And thanks for the sub!!

[@andymartinez1288]

Dude. I watched this for no reason at all. But you do great tutorials and the fact that you put all the links just made me subscribe to you. Keep going!

[@realLuisGiordano]

Thanks for the video. It was of great help when I painted the black plastic door handles in my car to match the body color. It was a long process, but the quality of the job was on par, or even better, than factory painting

[@chrisrigsby8935]

Best video I've seen for painting interior plastics! Should make a video next on how to do the textured plastics on the interior, that would be really handy!

[@nathansegurakennedy8607]

Bro I love your positive energy..Do what you love, love what you do. Peace

[@Light_Worker]

I really like the way your red trim looks with black, it's not too much it's just right. Beautiful job young man. I am proud of you !

[@travisanthony9093]

Painting's no fun if you dnt get high during the process

[@Lonestar.Nick30]

BROOO I WAS LITERALLY DOING THAT BEFORE I HOPPED ON THE VIDEO LMAOOO

[@WayToManyAssassins]

I'm high anyway

[@eksine]

2K clearcoat will be permanently stuck inside your lungs, permanent lung damage. also it contains chemicals if you breathe too much in you literally will drop to the floor DEAD. is that the kind of high you wanted? high to the sky cause you're dead

[@andrewlawson3798]

High to the sky sounds like my type of high fo sho! 😎🤜🏼

[@TM-fx5le]

@@eksine yes

[@sbrochew4699]

This video shows the right way to do things. Not cutting corners, LAYERS! Time well spent and the end result is what everyone looks for but a lot of people do not go that extra "bit" to get there. Great job, great video. Would love to know what your cost of materials is. Tools make a world of difference and the orbital makes the job MUCH easier but, I am more curious what the line up of chemicals cost. Obviously I can do the work to figure it out, didn't know if you may know off hand though.

[@nstorm390]

This is a very good and well edited video you've made. Very clear and concise!! Excellent work. I feel confident in doing this now. 🙏🙏🙏

[@nobrakes500]

To the point, crisp...great that you don't go on rambling like others out there. Keep up the good work!

[@samdish7036]

Am glad this comment section has a mature non profane audience. And car lovers too lol

[@masonpugh3637]

Out of 30 videos this one is the best great job buddy

[@StonnieDennis]

Excellent work!

[@milanmastracci]

+Stonnie Dennis Thanks :)

[@aaadeejay]

By far the best video I've seen on this topic, excellent job and thank you for this.

[@isrealdiaz5381]

the most helpful video uve came across so far ready to paint the interior on my z4

[@milanmastracci]

+Isreal Diaz Glad you found it useful :)

[@DUDEBAACKE]

Hey bro you think you can do a full review/update of your car, you seriously have one of the nicest accords!

[@milanmastracci]

DUDEBAACKE Yeah sure thing!! :)

[@milanmastracci]

DUDEBAACKE kzbin.info/www/bejne/baqoaX2JecSjfMU

[@briguy3940]

It looks really professional and from the factory. If I were to attempt this, removing the trim first would be a no go. I'd tape everything up really good, and spray inside the vehicle. Before anyone says how dumb that is, I never said it was a good idea, it's just how I would do it. 🤪

[@MiguelRPD]

Will my Camry go faster if I follow this videos instructions ?

[@shredforceone]

Miguel Angel Medina Rise sorry, this only works with Hondas

[@esmegutierrez8374]

A7XinAfterlife unless he paints it black than it's an instant 15 hp

[@blackghost1231]

Absolutely, each piece you paint you gain 5+ Horse Power.

[@ssingh6197]

Clear coat adds an extra 50 HP but be careful, you may blow out your engine.

[@SmO4E]

hahahaha you made my day

[@kevinm1728]

Looks great. Gives it a splash a color, but you didn't over do it. Well done.

[@wardind506]

Make sure you have your battery disconnected before you unplug the airbag connector, and leave it unhooked until it's plugged back in. Otherwise you get a code on your airbag system and it's a bitch to get reset and can normally only be done at the dealer

[@jacobstoddard6207]

Ben Ward it would be just ur negative terminal right?

[@wardind506]

Yeah that's the best way to do it

[@randrose3177]

Great vid, let me just make a couple of suggestions. If your plastic trim piece is flat it is ok to sand however if you have a textured piece like out of a fox body mustang don't sand it; you will ruin the texture. Also, when you de-grease your piece prepping for paint preparation consider wearing gloves to protect your hands and the piece from the oils in your hand that you are prepping.

[@Palvader]

Great job man, I could mistake this for a ChrisFix video!

[@joeylongo1843]

not much a car guy, but that interior looks sick! I respect that the red is not over done. Great video

[@milanmastracci]

+Joey Longo Thanks Joey :)

[@clascickles]

I have no plans on doing this. It came up in recommendations i got interested but after all that, theres no way i would ever do this lol. But great vid, im lost as to why put all the clear coat on just to sand it off but hey whatever floats your boat bro.

[@milanmastracci]

It is to make the panels 100% shiny and remove the orange peel that was created when spraying the panels.

[@Jfresh55]

Phly if you know anything about detailing, you would have known that. do you know what orange peel is? sanding levels out the peel, then to restore the shine, you buff it out

[@clascickles]

Josh H i know nothing of that and he already answerex my question. thanks for your input.... 😐

[@adnaanpardawala]

Wow. Red looks excellent. Never thought this could be done. Will definitely try it in future.

[@johnargue2977]

Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry. After 52 coats of a dozen cans. Go the extra 10 % and wet sand. :)

[@mattarnold198]

Mr Meguiar say: "Wax on, wax off" - never forget this important lesson!

[@cameronhill8279]

I was a bit surprised by how well you explained this stuff. You earned my sub.

[@milanmastracci]

Thanks Cameron :)

[@TheOnlyToblin]

What do you recommend for painting interior panels that have a surface texture to them?

[@sebastianrangel8885]

Vinyl spray paint

[@Couchpotato550]

I've got a 1987 Fifth Avenue and am looking to paint the "wood" trim I think this video is really helpful

[@mlivesay88]

says to wear a mask... DOESN'T WEAR THE MASK.

[@christophermcdonough3466]

Wahahahahaha

[@subadanus6310]

"do as i say not as i do"

[@davepelfrey3958]

Maybe wanted to catch a small buzz. Just sayn! LOL

[@toddyboy563]

Coronavirus in a nutshell

[@markcullen2870]

This aged well

[@diegomartinez4451]

Hey just a tip, don't put the clean pieces in the same spot you sanded them, because they can have dust and ruin the paint later. So, sand them, clean them, and then put them on another diferent surface.

[@archNagel]

This is awesome. I painted my car's center console but it got scratches really easily. You did a great job with the clear coat and polishing. I will be redoing my center console with your method. Thanks a lot for the video. I subscribed!

[@milanmastracci]

Angel Rivera Glad to hear!! Take your time and don't rush it, thats all I can say :)

[@pasitalredy90]

do a video on how to build a rocket please

[@johnbaner3423]

i missed the part where you demonstrate that Airbag honestly the $1000 Airbag instructions are what we need to see you demonstrate

[@josephro6367]

Great video dude! You shot it very well and good job on the pj!

[@ericlugo1597]

How are you doing, brother? I appreciate the work you did on your panels. I just purchased a new truck for My Wife and I intend to do some of the interior the same way in red even though I had a busy idea of how to do things you sealed the deal for me thanks again.

[@christianrodriguez7478]

Nice video straight to the point. I've being planning doing this to my '11 Lancer.

[@neilbrislawn1963]

just a friendly suggestion when your painting dont just spray a half of it. you need to do long sweeping sprays and that will prevent any imperfections aswell as sanding by hand is a huge part. using a grinder even with the pad can still cause flat spots. Looks awesome though! nice vid

[@ryanperez5417]

Thanks for the reply. Can you do a diy on how to perfectly wrap the interior handle please? It would be appreciated!

[@markcullen2870]

Hey man Ik this is 5 years later but did you ever figure out how to take the door panels off lol

[@ML6103]

So satisfying when you take it all back with the sanding and cleaning. Almost didn’t want you to prime it

[@CarAudioInc]

It's so funny how when you think "oh I'll just paint it"... $300 later.

[@spoderman2886]

+Abaddon Guecubu lmao and u put up with it

[@alexanderdinges2739]

thornygravy

[@alexanderdinges2739]

thornygravy

[@alexanderdinges2739]

thornygravy

[@Jfresh55]

thornygravy more like 20 bucks

[@EliasHernandez-ov2jz]

Bro, you just helped me with everything I was looking for. Thank you, I am subscribed.

[@wipi-dn2jf]

that's actually not the way to spray paint, you are suppose to spray in one go from edge to edge, not part by part and stop in the middle of the panel, it will look uneven.

[@joelscb]

k

[@derrickperry1657]

thank you lol was thinking the same thing

[@bryanhodgin1329]

And he was too close to the object he was spray painting

[@bris9984]

Your mom is uneven

[@DarthCorvus]

I agree. I mean I'm not trying to give the man hell. He still managed to produce an excellent looking piece in the end, but I was cringing watching his spray pattern. All the same to each their own lol. Great looking piece.

[@TroubleMakerVlogs]

Most informative video I've ever seen in my life , you my friend are a godsend ✌️👌

[@milanmastracci]

Glad to help! Thanks

[@user-xy2jh1zs9j]

"Without spending a dime at a shop"

[@nomadMik]

In US English, 'shop' means a workshop like an automotive place, not shops for shopping, as in standard English. So while you won't have to pay anyone to do the work in a 'shop', you will need to spend a couple of hundred dollars at a 'store'.

[@nomadMik]

@hermes trismegistus It apparently wasn't obvious to 2T, which is fair enough… it's startling what a media bubble the US is in. I've lived here for over 20 years, and I'm still find things most people don't realise are unique to the US.

[@dailyshoey8982]

Next time I paint something that I want shiny and done Properly , I will be deff doing these steps , You took your time , you thought everything out . I used to just Prime and Paint and waited 1 day , turned out crappy , Thanks milanmastracci !

[@milanmastracci]

+Just Cause Tube No problem man!! Glad you found the video helpful

[@tegular1]

Great video. You forgot to put your respirator mask.

[@jmhernandez6503]

Tom Dolic Safety first!

[@codeyhanna767]

Also painted the trim on steering wheel by tapping everything up. Couldn't get the trim off steering wheel. Worked out great.

[@chewynoodles409]

This guy hit puberty like 30 seconds in

[@ThePatrickBateman69]

damn dude. the primer and filler sprayed and had such great coverage. that VHT paint has the worst spray tip pattern causing you to be hesitant when you applied the first coat. great video as always.

[@shivamsingh-si1uq]

Looking......,

[@bucketcentral8311]

why are you using 2 primers? 1 is enough :P and you really didnt need that many coats of primer, its not a sandblasted car so 2 layers of primer would be enough. and also sand down the primer with a really fine wet sandpaper before spraying your collor :) and also dont do those small back and forth motions, do complete crossings over the whole peace, better results that way

[@jasonwade3933]

All he had to do was wet sand , the lacquer that he put on, he did not have to go all the way back to the silver, he had an existing red match all ready , all he had to do was Sand back some of the locker with wet paper and then go right over with the better lacquer that he, wanted totally made a meal of it , and not everybody has the money to be paid for more primer more red paint and so forth! Or he could have triad tried to buff it up with the compound in the first place he might of got the result That he Wanted ?

[@imthatguyhere]

Jason Wade I think the redoing of red was more to show how to do it, not to refinish it.

[@infury496]

Mate if you keep going like that you will very far. Well done!

[@badabingbobaloo7245]

put your resporator on practice what you preach

[@mickholgate3347]

Great vid and results using pressure packs, the only thing you forgot was plastic primer/adhesion promoter.

[@bridger911]

Without having to spend a dime? Except on supplies 😂

[@Neobaneo]

right? The polisher alone is 100$

[@vau5114]

Very detailed explanation. Unlike any other. Good job man

[@xanderc4732]

should change description to "how to paint your honda interior"

[@theonewheelednavy3854]

I would always recommend to put your spray cans in warm water for a couple minutes before using them especially when using plastidip. This makes the paint come out of the can way more evenly.

[@DiamondFlossin1]

can I just pay u to do mine? 😕

[@milanmastracci]

+Manny Ya Bish If you want :) Send me an email at [e-mail]

[@DiamondFlossin1]

+milanmastracci done!

[@DiamondFlossin1]

+i2Hot4Tv he would've if I sent the parts

[@Cyrus_95]

+milanmastracci Still have the same email? Might shoot you an email and get an estimate on mine if you still are doing trim pieces for people

[@milanmastracci]

Hit me up Cyrus!!

[@mjg878]

that looks so professional bro well done

[@hermonbasil9263]

don't u think its actually easier to get your interior wrapped in any choice of your color rather than go through this awful thing?? not a hater ..love the mods you doing to your car ..but ...wrapping is easier yeah ?

[@JasonThornhillPC]

Excellent description and quality job.

[@envyduzit]

Awesome job man. You took your time to do it right. Props bud

[@retiredlivingthedream]

Great video, thank you! My favorite part . . . demonstrates disclaimer regarding breathing apparatus to protect from lawsuits, then zooms camera in to get head out of the shot and paints without wearing breathing apparatus. :-)

[@stevenwood811]

Gotta say, your video hit every point. Excellent video, thanks.

[@matthewwarwick5416]

very clear and structured, no BS. Gives me the confidence to try mine. I want to put pin stripe or decal on mine as well. Any suggestions on technique, I'm thinking decal then clear coat. Even better if you could suggest a product to print my own image, I've been looking for a printable clear transfer type product, but still yet to find anything.

[@craigjohnston556]

Turned out great, but i like how you set the cleaned piece down on the table you just sanded over.

[@danielteniza161]

that's a professional work. congratulations

[@gsprof9788]

Did a good job explaining, but several suggestions having restored car interiors for over 40 yrs. One wear gloves, you don't want to get the body oils or anything else from your fingers on your cleaned surface. Otherwise you can have fish eyes and adhesion/finish issues. Start with washing and drying with mild dishwashing soap. then clean with wax/grease remover or similiar product. You then clean with isoprophol alcohol and 3M scotchbright blue pad to prep clean/surface of any remaining crap. Last after cleaning you really should use an adhesion promoter for hard plastics, it chemically and at a molecular level preps the plastic to accept the paint for better adhesion. If doing a textured surface. Also if your just re-coating or part is molded in the same color and using the same color you can skip the primer coat or just lightly fog a primer coat on. Same with the color coat thin coat to cover primer and give correct color to part otherwise you'll loose the original grainy texture and it'll look painted

[@JonathanThompson1320]

Really enjoyed the product shot and recap explanation at the end. Thank you!

[@jeffcarroll4219]

That car used in the double clutch video sounds good, man! Beautiful sound

[@vvalasek]

Great video - I’m at the point where there are a few interior pieces I’m looking to refinish / nice work

[@jackberry]

Wow! That's crazy man. Excellent work and great video. I just found your channel because I'm starting a project on an 05 Mini and your content is GOLD. I always thought you could just spray paint... haha, little did I know.

[@MrLahey27]

This is my son in the pic but I must say you are absolutely 'gorgeous'! You could and should model my friend.

[@Robert8455]

Pretty nice job young man and impressive number of views too. I'm debating on painting the plastic silver trim on my truck.

[@mugen-r4084]

These types of videos make it look very simple knowing full well when you actually try it you will fuck it up! But good video straight to point no fannying about, clear instructions , detail info on products etc

[@HowToKnowLife]

DUDE You are awesome! your videos are a really great help with simple DIY projects!

[@milanmastracci]

Aaron Enerio Thanks man!! I appreciate all the support I can get :)

[@MrChris2Fur]

It helps me soooo much having the same car as you! I love your videos man.

[@milanmastracci]

MrChris2Fur Thanks Chris :) Glad they help!!

[@hidconceptcom]

Very precise explanation. Not sure if I can do as good as you demonstrated though.

[@SuprRubberDucky]

Your videos are amazing bro. Keep them coming.

[@milanmastracci]

+ducky yolo Thanks man!! :)

[@raychavez9441]

Awesome job doing the video you did everything nicely and you explained perfectly what you used your car looks awesome👍

[@milanmastracci]

+Ray Chavez Thanks Ray!!

[@olavcramer1260]

Nicely done, excellent process description. Thanks for sharing.

[@milanmastracci]

Glad it was helpful!

[@enzo665]

This saved me over $700, thank you 🙏🏾

[@andrewbulock]

I'm here 9 years later because I'm curious about painting silver interior trim pieces to match the body color (BMW Marrakesh Brown). Fiat does that by default in their cars and I notice it has a way of classing up a really cheap car to make it look stylish on the inside. My interior is beige, so I think it could look cool. It's not like matte silver is anything exciting.

[@r_s1776]

Your video is very helpful. Thanks.......I have to redo mine. I used rustoleum paint and the spray nozzle was terrible.

[@johnhanna2878]

I like what you did bro ! I'm one of your subscriber since alomst 5 years now just from this video!! And I did the same for my Fiesta thanks a lot.

[@milanmastracci]

Happy to hear that John!! Thank you 👊

[@badal38257]

Superb video my man!!

[@SiirWookiie]

Your channel is the best

[@milanmastracci]

+Cole Osborn Thanks brother :)

[@nemasprobleamas8465]

This was real nice done, great job, make more.

[@milanmastracci]

+rodde wip Thank youu

[@JeffDeWitt]

Very well done. My only criticism is using different brands of materials on the same project. While primers, color and clear coats should all work together if they are the same type of material in real life it's not always the case. But... good job! I'm getting ready to paint the panel that goes around the instruments in my good old Jeep XJ.