Millyard Viper 8 Litre V10 Motorcycle - Part 2

In this video i carry out pre ride safety checks then take the viper out for a ride. I carry out these checks before i ride the bike on the road because of its size and power. There are also some riding clips from when i rode to the Isle of man TT in 2012 with my sons Sam, Stephen and friend Ian. It was the wettest TT of the 11 times iv'e ridden a motorcycle to the Isle of Man with 4 days of solid rain! the viper behaved its self most of the time but I dad have a couple of moments with a wayward back end ! The in pits footage at Elvington runway was shot by Dunk Rose (d-rphotography.weebly.com) We were also filming for an episode of Henry Coles ITV4 The Motorbike Show which was fun. The on bike video is from one run where I reached a 1/4 throttle gentle run of 189mph, but i shut off early going through the timing at 182mph. I ride my Viper V10 for fun using a fraction of its speed capability. Motorcycle News tester Bruce Dun rode the Viper at Bruntingthorpe proving ground in 2009 to a speed of 207.101mph using around half throttle. Since i completed the bike in August 2009, I have ridden it over 9000 miles on the road and over 200mph at Bruntingthorpe. I enjoy riding the ViperV10 to bike meets and shows during the summer.

[@allareasindex7984]

Traffic officer: Do you know why I pulled you over? Allen Millyard: Because I let you?

[@davidlightfoot348]

Answer: "That would take an act of clairvoyance."

[@johnnyboy1586]

What a beast!!

[@dawidos117]

OMFG! 😂 That is so true! 😂 Allen is BOSS! No questions asked!

[@Heavywall70]

Because he wanted to get a closer look and a photo so he would sound like he was lying at the pub later that evening

[@gerry5134]

😂😂😂😂😂😂😂

[@stevecolwill9761]

Allen doesn’t raise the bike on the centre stand, he pushes the Earth downwards! This man restores my faith in the human race.

[@AllenMillyard]

Thats true in physics

[@kevinp8212]

Yes, guys like this also restores my faith in humanity. Forget the political crap, there are very real geniuses out there. They exist and are carving our future.

[@nmcg2587]

I wondered why the Earth felt a little wobbly recently. Heaven help us if he runs the bike opposite of the earth's spin - shorter day and a huge skid mark!

[@bribbripnairbnab7301]

Like how Chuck Norris does pushups.

[@johncunningham4820]

@@AllenMillyard . Yes . It is . To every action..................etc .

[@jenso8299]

This is like watching somebody, who tamed a T-Rex and now preparing to take it for a walk.

[@dogpaw775]

when the whole world seems to stop making sense it's good to know there are people like Mr Millyard around.

[@kttmmedellin7138]

An evil genious with with the voice of a chilrens tv presenter!

[@fidelcatsro6948]

i think you described him well...

[@candymintz]

don't know about evil, Allen is one clever Brit, I do agree with the your comment on his voice, I commented a while back that he should contact Disney for voice over work in movies, with that voice he could sell sand to an Arab

[@kttmmedellin7138]

I just said evil for comedy effect

[@UmmmmmmmWhat]

Mr Millyard's Neighborhood... coming soon to BBC Kids.

[@fidelcatsro6948]

@@kttmmedellin7138 i know "evil mechanical genious..".

[@stevenlawrence278]

I really believe that the name Allen Milyard can be spoken in the same breath as Isambard Kingdom Brunel, Richard Trevithick and Soichiro Honda.

[@joseywales3789]

Steven Lawrence, let's start at the beginning ... Thomas Newcomen ... JamesWatt ... George Stephenson and his son Robert Stephenson ... but let's not forget .... Frank Whittle! I always see Allen Millyard as most like Frank Whittle. Frank Whittle thought about, designed and built the first Jet Engine, he knew that it would work in principle but he spent years quietly problem solving, designing and building... the only difference between the two Engineering Greats of Frank Whittle and Allen Millyard is that Frank didn't have a Swiss Army Knife!!!!!!

[@user-sl1tg3eb9q]

John Briton anybody?

[@stevenlawrence278]

@@joseywales3789 I was trying to keep the list short!

[@Kobe29261]

This was informative! Thank you!

[@bribbripnairbnab7301]

Burt Munro

[@bobstrade6355]

I am a right miserable git, but I didn’t stop smiling through the entire video. Well done Allen, you are indeed one of a kind.

[@nicholasmooney9611]

Ha ha, you definitely won the comment section today.

[@zachmarkham84]

Based on this comment, I'd like to grab a pint with you.

[@gooner72]

Totally agree mate......

[@Pedroisanickname]

We must be brothers.

[@dougankrum3328]

yes, quite a monster,. I first saw Allen Millyard on the 'flyer'....a 5 liter V-twin...a different monster...just imagine if he really opened the throttle on a 305 cubic inch, V-twin Motorcycle.

[@stevejones8789]

I used to work at the same site as Allen and he did some really crazy builds, so so clever, it's people like him that given unlimited resources could really make a difference to the world. You have to remember this guy builds this stuff in his shed in the garden, if you ever talk to him he's one of the nicest guys you could ever hope to meet. Absolute legend, a rare brain indeed. Also makes mountain bikes lol

[@goldenmath4091]

As an engineer myself this is what my growing up used to look like, now sadly , blokes like Allen are rare...no one asks what if anymore..genius

[@EdwardT9]

The new young engineers won’t do anything without a 3D model of everything first, and then it has to be CNC machined or 3D printed to build it.

[@gdfggggg]

Blokes like Alan have always been rare.

[@spurgear4]

It diden't set off alarms. That was the other bikes crying. Makes my ZRX look like a moped.

[@spurgear4]

@lahokc59 I love mine to. Bought it new 18 years ago, I'm getting old.

[@Johan-vk5yd]

Not only a mechanics and engineering genius, also stunningly clever on that monster of a bike! (Embarking on those wet steel ramps with a 600 kg two- wheeler was a feat! )

[@AllenMillyard]

It was a bit tricky

[@readesiun988]

This engineering masterpiece has had me smiling through the whole video, truly a 9th wonder of the world this man is

[@Tryingtimes007]

I’m not surprised it’s raining, this bike creates its own weather “vortex” ⛈

[@fatsolutions]

The world needs more people like you Allen, too many people ask why? But you sir look at things and say why not!

[@neodutch]

Allen is the only person that could make checking the oil seem interesting. This episode brought to us by Victorinox Swiss Army Knives.

[@bomberaustychunksbruv4119]

Yeah - seriously they should be sponsoring him.

[@keithroberts527]

Searching frantically for another build

[@dougankrum3328]

Swiss army knife...I bought a used on in a 2nd hand store...1970's...I carry it everywhere....I actually used the 'saw' blade to cut down a Christmas tree with a 5" trunk...

[@blacksquirrel4008]

I heard him call it agricultural in another video and he is absolutely right.

[@jimcockburn4652]

He wouldn't have needed to ask me twice. Allen Millyard you sir are nothing short of a genius.

[@axispowerdiesel]

I won't even ride my dirt bikes on wet pavement, and Allen is out here on a 600kg viper bike....what a legend!

[@patbassman8251]

You should never ride on the pavement thats for pedestrians always use the roads.

[@drewywgx924]

@@patbassman8251 if its illegal on the road use the sidewalk

[@patbassman8251]

@@drewywgx924 Whats a side walk .

[@strokenumber3]

Extraordinary, redefines "A man in his shed".

[@bjoernandersen8287]

It's just amazing to watch Allen's videos, I have never seen anything like this ever in my life. Monster bike with a V10 engine, I didn't think that was possible to make. and drive. Well done.

[@HashMaster1776]

This is the most ridiculous thing I've ever seen... in the best way possible. Outstanding.

[@miketoney1660]

when i look at a famous painting or a piece of art that a renowned sculptor has made i don't see it as a person who is into that gig does, but when i see one of Allens projects i see all the detail, planning, execution that is involved with creating the out come, no, i don't have the ability to do these things but i certainly can appreciate someone who does. great job Allen !!!

[@revanslacey]

200mph on the back of a homemade motorcycle: "Shall I wear some gloves?", "Nah, she'll be right."

[@TorquilBletchleySmythe]

Most Aussie comment yet

[@orwellknew9112]

The thing is that he had to know so much just to even consider making this amazing bike. Then he went ahead and did it, solving all kinds of problems with incredible ingenuity. Finally, it all works like it’s supposed to. Genius.

[@julieannecharters6132]

english man in his shed can build almost anything ! amazing work Allen and top engineer really enjoy your down to earth videos.

[@markos1963]

Bet that biker you overtook wondered what the hell was that when you came by!!

[@JohnnyMotel99]

exactly!

[@howardosborne8647]

He probably thought Armageddon had started.

[@neodutch]

I thought it may have been Steven shooting B roll for the movie.

[@bobwilliamson5574]

Overtaken by an engine.

[@Yt_xrider]

207.1mph wow😎 Made in a shed with a garden, amazing👍 While sipping tea😂

[@frenchmirage6711]

Not only the skills and the capacity to invent, you have that pactical sense that I like for technical solutions : simple, reliable, efficient. You're a hero! Take care.

[@steven.ghodgson765]

i have been aware of Allan for years but this is the first time I have watched his videos. I love his improvisation and his sound approach to a problem. more to come I hope.

[@kiwizz2177]

The scariest road bike out there ! Bloody intimidating machine. Love it

[@frobinson2413]

You are just awesome, your talents are endless. What a stunning machine you have created schools should show your videos, to get the younger generation motivated about engineering.

[@1998TDM]

I have shown Allen's videos in class. Not so much to push engineering but just to motivate motivation and self belief.

[@kevinp8212]

@@1998TDM very good! I am sure such stuff would have motivated me as a teenager or younger! Just show what a guy can do with minimal tools and great imagination and engineering!

[@mrbumcraic5046]

I still can’t believe how much engineering you got going on Magnificent

[@kevinghifari2330]

perfectly crafted, well-engineered, lots of necessary hidden fitures. simply a 600kg masterpiece

[@bongosock]

His next motorbike will remain stationary, and the planet will revolve underneath it--whatever direction he wants to go.

[@louisgunn]

first bike i've seen, that doesn't have a pillion, the guy on the back is actually the flight engineer/weapons officer

[@sabeillard]

Best comment ever! 🤣🤣🤣👍

[@louisgunn]

@@sabeillard ✔

[@shannonharris2816]

Allen, you are the master, and an inspiration. Great British engineering.

[@brockett]

Look at the faces of all the people around it in every shot there is wonder, disbelief, and admiration. Something so fabulous that they will never forget that can only be matched by a prince riding a unicorn.

[@alphacouriers]

well ... watching this my daughter messaged me saying "the floor is vibrating" haha...awesomely awesome

[@TheMissendenFlyer]

Love the sound of that beast Allen - I can't get over the fact it seemed like it was still virtually at idle when she was rolling at 180+mph - my stress levels went through the roof when you were boarding that ferry...scary stuff!! All the best mate, stay safe out there....

[@AllenMillyard]

The ferry was the most scary thing ive ever done riding the viper! the camera doesn't show how bad the rain and wind was, and the amount of up and down the ramp was doing beneath me !

[@GodsMistake]

@@AllenMillyard Do you know those new Triumph Rocket 3's? What if you glued two of those engines together and made a 5 Litre V6. That would be fun.

[@gunsknives5395]

It looks like a Kawasaki Mk IV 1000 that swallowed a V-10 engine by mistake.

[@dietznutz1]

@@GodsMistake or i6 or flat 6

[@aspopulvera9130]

@@AllenMillyard do you have any plans on building E bikes?

[@jacek8122]

An absolute masterpiece of engineering. Thank you for everything you do. I have so much joy for it, mixed with admiration for your skills ... Greetings from Poland. Jack

[@robertmatthews8302]

An absolutely wonderful machine. You are a constant source of inspiration to me and many other true bikers. Thank you very much Allen for your contributions to the real world.

[@AllenMillyard]

Thank you

[@tomthompson7400]

Great to see part two. Theres so much detail in this bike and its so well done that the whole thing looks simple . And I mean this in the best way , it just looks factory .

[@brianbob7514]

It just occurred to me that you almost never get to hear this thing at higher rev’s. Amazing machine :)

[@MrJugsstein]

Allen You Sir are a Legend. Best use of a shed and a V10 ever. Thanks for all the description. Loved many of your engineering solutions. Will

[@ReferenceFidelityComponents]

Alan, you are a defacto madman and the world needs you! Utterly bonkers, glorious, brilliant and superbly done. As an engineer who tinkers in my own workshop, my hand and back are sore from all the doffing of my cap and bowing to you for each and every immaculate creation you astonish us with. I was fortunate enough to see the Flying Millyard. Perhaps one day I'll get to see more of your work. What honestly amazes me is your talent to do things with encyclopedic knowledge and mostly hand tools! Keep on keeping on and I wish you many happy years of creative tinkering ahead.

[@hoost3056]

Thanks Mr. Millyard...With all the madness in the world right now, your ASMR motorcycle videos are much needed. Beautiful machine👍

[@canadaeast8358]

I don’t even know what to say. I love stuff like this and you do such amazing work. Most people wouldn’t even be able to ride that. You build it first. And it looks great too . Just amazing

[@philholder9626]

Wow, what a machine! I’m not really a bike guy but I am a Mopar guy and the sight and sound of that V10 muscle on that bike is incredible. Like the stripe down the tank as a nod to the Viper too amazing! Thanks for posting

[@Waranus36]

Allen, no words. Its a masterpiece and you're a genius, art of the steel and oil. Yours respectfully,

[@10mm]

That's some incredible workmanship! The fact that it did great in the rain and didn't have any electrical issues is a testament to that! Thanks for sharing!

[@nickbishop6784]

What an awesome machine Allen. I love all the present flight checks, just like getting an Antonov 225 ready for take off.

[@rdaystrom4540]

Grrrreat video Allen. I was concerned during the rainy bit but you got it on that ferry ok. I think I might have had both side stands down on that swaying ferry! I feel like I rode the Viper Bike now. Thanks ☺️

[@chrispritchard4676]

Mr Millyard, you must be intensely strong to handle this and your other big creations. When you boarded that ferry, my heart was in my mouth. I had 55 years on big bikes, but nothing on this scale. You humble us mere mortals, and I take my hat off to you.

[@AllenMillyard]

It does give me a good work out 💪

[@diegocella6791]

60 MPH at 1.500 RPM! Loving it! And And, all your bikes make such an amazing sound!

[@garypeatling7927]

A scannia is doing around 1000 rpm at 60mph

[@jimbonater]

@@garypeatling7927 Yeah but does it take off in that gear? I don't see how he can drive at just a few miles an hour in this? Must just slip the massive clutch?

[@alexmorgan3435]

Dogs run in fear, mothers pull their kids inside their houses, car and bike alarms go off, the Millyard Viper is coming.

[@tylerbennetts8079]

Sounds like something Ogri would ride, and fast.

[@davidfalgout7304]

With all the awesome comments below, I can not come up with a better one, or even one that gives justice to such a wonderful mechanical device! Man & Machine, shades of Burt Munro ( worlds fastest Indian) and other greats. All that I can say I did was, I searched scrap yards and peoples trash piles to come up with broken old bike frame, a discarded worn out with broken case , 2.5 horse power lawn mower engine... that took me a year to turn into a motorized 2 wheel machine. I want a redo! I want to be born and live down the street from Allen. Just so I can watch such an incredible genius creating the impossible! Thank You ALLEN FOR WHAT YOU DO and taking the time to share!

[@edwardsp1916]

Love the registration. OTT it may be but what a great example of fine engineering. Mr. Millyard, one of the best engineers of our time.

[@ILOVEHALOhahajk]

There aren't many youtubers from who I eagerly await an upload. Not disappointed, thank you.

[@alonequin9694]

Music to my ears people must think it's a spitfire overtaking them! beautiful piece of work great video as usual thank you.

[@supercrackhead100]

Brilliant idea for the next build. A Rolls Royce Merlin bike.

[@gooner72]

Allen, I still can't get my head around this bike mate......... she is absolutely beautiful and an amazing work of art, you should be immensely proud of this bike. I don't think I've ever heard of another bike that has the beating heart of a Dodge Viper on it. Brilliant job mate, she's an absolute stunner.

[@papatruss]

I have watch you on the motorbike show many times and your bikes always blow me away. Looking at you you would never guess that you would do what you do. And all in a tiny little garage too, hats off mate. That viper makes my Rocket look like a moped!

[@luciddreams3493]

You have to do a vid with the backfire switch in a tunnel (yep I’m a child)

[@ageyb]

Probably not a good Idea as letting a cannon off would likely collapse the tunnel

[@AllenMillyard]

@@ageyb I have and it was really loud !

[@singhangad]

Please show it to us!!

[@leahall]

You never get too old for that.

[@singhangad]

@@leahall never ever..the only reason i dont take of the ais system on the bike is it wont pop n crackle on decel.

[@robbiemulholland6477]

I couldn’t stop smiling through that whole video! Hats off to you Allen, your genius is unrivalled, and your modesty is a beautiful thing!

[@kiwizz2177]

Seeing this motorbike instantly gave me a flashback to seeing a photo of the Munch Mammut when I was a kid about 50 years ago (give or take) I was totally impressed by the size / appearance of that motorbike. Same feeling today ( but times 10 ) seeing Allen’s mammut !!! Great bike. Now Allen needs to find a crazy enough “ test driver “ to give FULL throttle on the bike instead of 1/4 or 1/2 !! Thanks again Allen.

[@Steve-rv1ql]

Lord, how have I missed this channel, mad as a box of frogs, an extra-ordinarily talented engineer/machinist/designer. Amazing.

[@someaussiebloke4487]

In having a rough time at the moment and you've motivated me to go out and wash then ride my rocket. Thanks mate

[@NautilusGuitars]

Hope things have improved for you. Been there recently myself.

[@someaussiebloke4487]

@@NautilusGuitars it always can get better my biker brother!

[@dietznutz1]

If you aren't motivated to ride that then.....

[@gdfggggg]

How you getting on?

[@DaytonaImages]

We need a lot more people like Allen to get the heart racing before we all become too sanitised.

[@patrickhemphill8842]

Only just come across your work Allen,not only is it pure genius you mate are an engineering comedian with your off the cuff comments and mischievous tone of voice.Makes me smile whilst in awe of these achievements,you carry a Swiss army knife as your go to tool why? In case a thought comes to mind whilst on a ride so you can pull over and rattle up a space shuttle !! .Long live the likes of you mate where you as a humble guy can bring happiness with your being.Thanks Allen.

[@iangrimshaw1]

I've watched his from Part 1 to Part 2 . I started out with, 'this is a bloody stupid bike'. Half way through I thought,' I really, really want a bike like this, made by Allen'. The ultimate twist and go.

[@derekstocker6661]

So very pleased to see this great update Allen, as said elsewhere I was amazed that even at speed she sounded as if it was on tickover! Well done, she's such a fabulous beast, look after her and be very safe, and thanks.

[@paidburglar1384]

I can’t understand why you don’t have more subs, what’s wrong with people lol, awesome stuff Alan

[@AllenMillyard]

Im hoping my cannel will grow

[@rossm9676]

I agree with that. If Colin Furze can get 10 million +, then surely Allen should have millions too. 🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

[@Bread996]

@@AllenMillyard I love the detailed explanations of how you engineered the components. I think if you continue showing these you’ll get more subs for sure.

[@SuperFunkmachine]

There no drama, if something goes wrong, there's no shouting a tool slamming. There's a kettle, some thinking about it and phoning around.

[@jackdallwitz5086]

I reckon they just haven't been exposed yet, the poor bastards. Time to get busy with that share button.

[@bushmanPMRR]

Who could possibly be any more insane that a man who builds a V10 8 litre Viper motorbike? Easy! The man who gets on the back seat at the start of a two mile runway! The world needs more bonkers people like this!

[@georgebowden6748]

Hello from Oz, the word Genius doesn't do you justice Allen, it's absolutely incredible what you achieve. Thankyou so much for sharing your work.

[@ericgabriel4190]

Thank you so much Allen for sharing your genius with us. I cannot explain how much I love watching your videos!

[@Banerjee.bishal]

The sound is so raw! Imagine this behemoth going past you!

[@ridelifenz]

Theres very few people in the world who could actually think and work like this rare legend. Awesome machines.

[@malcolmabram2957]

I admire people like you who are so mechanically creative and can put machines like this into existence. I also enjoyed this video a I am considering down-sizing my bike.

[@aimanbryan1424]

Suzuki: We have a Hayabusa. Millyard: That's cute.

[@desmondtighe9410]

Ha ha ha ha ha ha ha ha 👍

[@MaxMax-vg3cp]

🤣🤣🤣🤣🤣

[@eurocrusader1724]

Exept when its a turbo'd Busa with +500HP minimum... Plus it weighs half of this monstrosity and handles like a bike , not like a wet towel... Speed is good , but how many times will you be able to use it.

[@vtwinpower1897]

A BUSA would still smoke it in the quarter BAD!

[@johncarl5505]

@@eurocrusader1724 The Viper bike can reach 200 mph at half throttle with no fairing. It is decent enough at cornering, it is not designed for road racing. It is more controllable than a turbo Busa during acceleration due to the power given to you at low rpm. It makes the Busa useless since the only advantage a Busa has is cornering, no one uses a Busa for road racing anyway. Maybe at launch and top speed a turbo Busa would be better, but even experienced riders have a hard time controlling it.

[@mauricecasey5556]

Would love to see biography of Alan Millyard, I would buy that book in an instant. ;-)

[@AllenMillyard]

i should do one soon but i really need a ghost writer,

[@howardosborne8647]

@@AllenMillyard The ghost writer of Christmas past.. Get it done.

[@BenMessenger]

​@@AllenMillyard I'm pretty sure there would be dozens of great writers would love the chance to do that. Pretty much any of the best MCN journalists from the past 65 years for example, but lots more besides. (sorry if this message posted twice - KZbin crashed when I pressed Reply)

[@ukurtlele1494]

@@AllenMillyard Peter Egan! he's retired now and has the time.

[@ZoomStranger]

"I suppose it all started when I was working in the postal office and had a look at one of the delivery scooters...

[@maniyan_wanagi]

I just can't get over Allen - one humble dude, despite his genius. Most ace wrenches are primadonnas - yours truly went through that phase, too - Allen? He wonders what's going on in the kitchen and takes time for the birds and little animals. Loveya Man!

[@john123456889]

can't believe the level of genius here. allen is the alan turing of the motorcycle world. wish he lived near me, id be confident that no matter what happens to my bike, i know a man that can fix anything

[@jiltedjohn9294]

My neighbour's car has 2 dipsticks , one in the engine and one behind the steering wheel ...lol

[@candymintz]

classic

[@stevegraham3817]

Aahhhahahaha

[@guymorris7860]

Im sure thats an old Ford Capri joke. Well thats when i first heard it.

[@ianmangham4570]

My neighbour is a religious dyslexic who believes in DOG.

[@dawidos117]

Man, you’re the engineering god! Full respect!

[@Westsideautomotive]

Alan I’m not a biker in any way at all but I love watching your channel because you sir are incredible. You take the cake when it comes to making ideas leap of the paper and onto the street. Pure brilliance.

[@AllenMillyard]

Thanks for watching

[@timwegman5776]

Man you have thought of everything. There is not a production bike on the planet that is as well thought out as this beautiful rolling work or art. Well done my friend we done!!!!

[@andy6359]

Love the fact that you ride your creations to shows & the Island. I have had the honour of being passed by you on this wonderful creation. Keep up the good work.

[@plusfastvn]

The honour of being passed... Something you don't hear often. Totally correct by the way.

[@crp7965]

You're an inspiration and a talented man keep up the good work

[@Rustyorange725]

My dad used to tell me all about some of your creations when I was younger and remember seeing that beast in the flesh I was blown away.

[@CB-vg9lg]

You are like a children's book genius inventor for the motorcycle world. A legend on two wheels thank you for your creations!

[@davidharris5736]

I've bee waiting for part two, Thanks for 15 minutes of sheer enjoyment from the engineering ideas an work around's to the sheer pleasure of seeing you ride the bike. I just got a pair of new earphones and I swear I was on there. The sound was great !

[@chewit3504]

What a fantastic machine, she sounds beautiful Allen

[@WrightsW5]

The more I see this, the more I think it's one of the most amazing bikes in the world!

[@mikepierce4739]

As a free American, you sir define what it is to be your own man. Don't ever stop.

[@Travis141123]

Gearheads standing around talking about their bikes. Alan shows up and they all hang their heads in respect.

[@atthesummitMTBskills]

What a glorious machine, I wouldn’t say it’s a practical bike but it looks more user friendly than many 🤣

[@danmcneil7181]

What an amazing bike. Just the thought of a bike that heavy and powerful scares the hell out of me. Beautiful sound. Cheers 👍😀🇨🇦

[@ekim000]

Thanks so much for making these videos. Getting a taste of what goes into your bikes makes them even more mind bending.

[@watchjaredwork1487]

That crowd like couldn’t believe what they were looking at 😂

[@daliborzak2485]

When you are riding your cruiser peacefully... and then THIS overtakes you.

[@neilt.i.w737]

TRULY REMARKABLE ! WHAT A PROJECT. THANK YOU Mr ALLEN FOR SHARING. KEEP on KEEPING ALERT .

[@bobbymckinney1264]

That the most awesome bike I've ever seen,I would love to hear it run in person,it's a work of art,you are the king of the road..