Milwaukee 7 piece cordless tool kit-Summary Review up front

[@MrSaturn7085]

One reason the sockets were difficult to remove from the impact hog ring is that you were using standard sockets and not impact sockets. It's worth noting the high shock torque of these newer Lithium impact wrenches is even more prone to shattering non-impact sockets - shearing off the bolt head is minor annoyance but an exploding socket is a bigger problem... especially without eye-pro.

[@icedt5617]

That's the only reason..

[@ChrisBlyther94]

I was just about to say that glad I saw your comment I’m a diesel tech and every time I hear that comment from a contractor I instantly place that same comment on the video

[@norcalsawsquatch9854]

I work in San Francisco building concrete high risers as a Concrete Carpenter. And let me tell you. THIS KIT WILL DO! We abuse and torture our tools pass them on to the next guy, he beats on it, then on to the next guy and son on. We are a productive crew. When they tell you on the 31st floor deck to go down to the ramp and deck i; do form work/ledger/edge form/cut rebar for shut offs etc etc..... A cordless drill/impact/saw/hammer drill/grinder is better to tote than 2 50ft cords and a skill saw/corded tools. I think this kit would be more than enough for a DIY type of guy........ The Milwaukee FUEL line of tools is PROFESSIONAL grade it's been PROVEN at the jobsite not at some Joe's garage who is doing a review on tools that look brand new! Smh

[@jasonm9264]

Not sure where you’re getting the tools individually for less than the bundle. Just priced it out based off that statement and came up with $1570 without batteries or cases. Seems a lot of people are looking at the standard M18 brushed motor tools. The fuel series are always more.

[@ftlaud911]

Good review...your numbers are slightly off. The circular saw is $150 and the driver/drill combo cost you quote is gen2 not gen3. Gen3 kit is $380 and just came out. The gen3 driver is $129 and not available cheaper bare tool. It is definitely more powerful than the Makita since its newer. If you add it up you do save some money. Would agree flashlight is weak. They do have the deal with the high torque impact driver which is $219 vs the mid torque at $189 which you got that saves even more. Personally the mid torque is plenty powerful.

[@Dwolfson22]

They make impacts with pin detents too (see Milwaukee 2860-20). Use of impact sockets will make it easier to remove them too...

[@johnoconnell7318]

Depending on where you buy It, it can be worth it. On ToolUp, I found the kit for $999 but it had the blades for the Circular Saw, reciprocating, and angle grinder. It also had the 2 batteries and 2 bit sets. On top of this, you had your choice of 3 items for free. A higher torque impact wrench, tower light, or 2 more batteries. If you buy it from them it'll definitely be more worth it.

[@stevennihipali3607]

the same price even... looking now!

[@jhard94]

Now it’s on Home Depot for $500

[@kodyadams5589]

Milwaukee is by far the BEST cordless tool maker on the Market , Next would be a tie between Bosch , Makita If you want the Best get Milwaukee M18 Fuel line with the M18 HO Battery either 9 amp or 12 amp. I have 44 years of experience with tools. Also am NOT paid like some You Tube testers are. Just know and use good tools.

[@danielsullivan7918]

Lol you need to know how they function before evaluations begin

[@5wisher5weet]

Really great video and great observations. Imagine if milwaukee made those changes you recommended. Disengaging of the jigsaw blade, the recipricating blade, the impact wrench bit and the better light and you would of given it 5/5

[@jimenz6548]

You can get the smaller thinner batteries from Milwaukee. And they appear to be about the same in size as your other products you are showing.

[@gaminggod7690]

Ty for your detailed tests and comparison to other great brands, much appreciated!

[@johnjoyce7705]

wrong sockets for impact

[@JarradNatale]

I found this Milwaukee M18 tool bundle on a clearance website for 50 bucks brand new. Seems like a legit price for any of these tool considering my dewalt was 150

[@bjc215]

model 2694-27.. 7 M18 tool combo kit, 2x 3.0 Ah batteries, 1x 5.0 battery, and one contractor bag on sale for 499 (from 899).. I consider the $500 investment in Milwaukee is the best investment in the category.. otherwise, good video

[@jdoyle4811]

Very well done and thanks for your research

[@silasvongsamath6500]

This kit is now $499 is that a better deal?

[@KernowEDC]

This was really helpful! Thank you!

[@MontclairWrestler112]

This is about 500 bucks now on Home Depot online store so you save about 450.00.. what about that price I’m honestly debating pulling the trigger on those and waiting on my dirt bike engine

[@GOJIRA561]

Stanza 710 haha I’m thinking the same! I have the 269.00 kit but I may return it to get the 6 piece???

[@MontclairWrestler112]

Kyle Mertz why not boss!? I would! But i ended up going with the One Key hammer Drill & Driver kit the 499.00 one & scooped an M18 Fuel Grinder since that’s all I need I have all the other tools already

[@GOJIRA561]

Stanza 710 hey is this there 3rd Gen models??

[@MontclairWrestler112]

Kyle Mertz no I think Milwaukee May have not gone with one key again, one key was second gen. I think I might get myself the 3rd gen and give these to my pops 😆 this video should answer all your questions kzbin.info/www/bejne/h5PMk5iFYp2ei7M

[@jasonm9264]

I’ve seen the standard m18 brushed for $500, but not the fuel

[@Bigdaddy-Donkyking]

Good thing there only 500 now

[@jhard94]

This 7 piece set is going for only $500 now in home depot site

[@odaydean510]

Wow... very honest and to the point then explain.

[@kurtisrisatti69]

I use my Milwaukee light for camping works great

[@anykeo8357]

I neet where your shop?

[@bradleychilders2135]

Tool up has this kit for 849.00 plus 2 extra 5.0 batt

[@bluewave2536]

Thanks for the headline!

[@Hunter-kz6os]

Kit is on sale now for 499

[@carterlivingston8801]

Witch is cheaper

[@TheYohan831]

it help's to show, anyone with a few buck's to waste, can record themselves, n say their too weak to hold new battery's, need old outdated one's, ?? but u can buy old battery's on ebay or amazon. also use grade 8, lag bolt's, with a powerful high quality tool, n they wont break !!! GRADE 8, for quality tool !! n no deck collapse.

[@chrishoward5401]

Your not the target consumer. Sorry, if you want diy tools I suggest Ridgid. Theirs a reason the motto is nothing but heavy duty.

[@josephwetegrove3430]

Chris Howard * There is

[@johnconnerhudgeons]

Just got that at Home Depot minus the crazy drill for 450$ PLUS another 100$ battery for FREE

[@stanworthington8767]

StaticTube Matic damn which Home Depot? I might have to order it in to my casa lol

[@lilplayboiiip7081]

This guy is something

[@65philo]

Sure is a lot of whining going on

[@TheYohan831]

LOL thank you !!! 1.5 n 2.0 battery's ?????? way outdated, 5-12 personally !!! n I'm no younggin !!!!! wwaahhh it's too heavy !!! hold it for me wwaaahhhh

[@MIHomestead]

I was thinking the same damn thing. The shit he complains about is just petty

[@reynaarroyo7439]

Wrong socket by the way

[@carsondavis653]

Believe on the Lord Jesus Christ and thou shalt be saved

[@ronnielindauer4874]

You should learn how to use tools before u review them

[@chrisjones6165]

Go to a tool supplier buy a kit get a free tool and then buy another kit and get another tool or some free batteries. Get more for less money.

[@Salsacandela153]

Milwaukee hater If you like makita just say it

[@waltervillatorocruz4445]

“My makita is so much easier to handle” look at your arms sir their toothpicks my dog Rick🐶 has bigger muscle than you, hit the weight room sir

[@DIYMark]

Lol. Ectomorph.