Remember.. I will be giving my V12 BMW 7 Series to 1 of you! TO WIN ENTER HERE: www.paypal.com/donate?campaign_id=MLP4H8VAE2B9U
@phillloyd6356 Жыл бұрын
Same as I used on ours. Let it fully harden for 24 hours before adding any oil - no more leaks from ours since the RTV was used
@GeorgeAusters Жыл бұрын
Glad to hear!
@williamkrusejr1846 Жыл бұрын
That wasn't as bad a job as i thought it would be ,and i was surprised that RTV was factory used . It is nice to see the Mini is getting good care as you put a lot of time into it .
@GeorgeAusters Жыл бұрын
Yeah really not too bad on this car!
@alpinevicemotorsports180510 ай бұрын
There is a technical service bulletin for this car that states that the gasket must not be used, because the oil pan becomes deformed after removal. That's why it leaked. I'm about to replace mine using liquid sealant as well.
@GeorgeAusters10 ай бұрын
Yep👍🏻
@seanpaul3050 Жыл бұрын
I recommend using axle stands when working under the car. Those plastic ramps are not safe. I had one collapse under the weight of the car. Luckily, I was not under the car at the time.
@GeorgeAusters Жыл бұрын
Pretty sure these are rated to 3 tonnes per ramp.. They're not cheap chinese ones!
@FateIsSoul5 ай бұрын
Thank you for sharing this how to! I was thinking of using a sealant along with a new gasket. Is that a good idea or better to just use sealant?
@ademineshat Жыл бұрын
You definitely need some kind of a car lifter. I'm very sorry to see you struggling like that 😢
@GeorgeAusters Жыл бұрын
That's the plan man.. Gotta save up for the garage first though!
@sam33more949 ай бұрын
Please...what was the torque on the oil pam screws. Thank you. 👍🏼👍🏼
@juli12345istRecorsi8 ай бұрын
12 NM. He mentioned it in the video
@poppydogz Жыл бұрын
I always use a light smear of RTV on any paper gaskets and never had a problem.. Let the attacks begin 😂
@GeorgeAusters Жыл бұрын
I can't see it hurting so why not!
@ncscientist Жыл бұрын
Same here, we will fight them all off lol.
@Challenger380aak11 ай бұрын
No matter how much RTV you put on the paper gasket, it still leak.
@ncscientist11 ай бұрын
@@Challenger380aak Still no leaks.
@Challenger380aak11 ай бұрын
I replaced 2 gaskets in one month and the second time the mechanic used one full tube of rtv.with paper gasket ,still weeping.
@thatmini Жыл бұрын
Love the MINI content 😎although i'm slightly biased 😂
@GeorgeAusters Жыл бұрын
Appreciate it!
@Minitia.R56 Жыл бұрын
I have just installed a gasket on the sump last week, this is bad news for me...
@GeorgeAusters Жыл бұрын
Noooo! Check for leaks and let me know how you get on👍🏻
@Challenger380aak11 ай бұрын
I have replaced 2 gaskets and both leak
@fexil756711 ай бұрын
@@Challenger380aak Me too, the new gasket leak, so in the next change oil im going to do like that
@eeroolli Жыл бұрын
Nice job George! :)
@GeorgeAusters Жыл бұрын
Thanks!
@reijung6898 Жыл бұрын
Nice video, thank you so much🙏🏻
@GeorgeAusters Жыл бұрын
You're welcome!
@mechanics4all405 Жыл бұрын
George,how can you get the plastic cap of corsa linkeage,been trying all day,what is underneath it can i cut the top off?
@poetadelsilencio6421 Жыл бұрын
Will an oil pan leakage make the engine smoke???
@Challenger380aak11 ай бұрын
If the leak is over the flex pipe then , yes it will smoke. My car has this problem now. Ill be doing this DIY next week
@Challenger380aak11 ай бұрын
Is this engine in 2012 Countryman. My oil pan is weeping even after replacing the gasket twice .
@GeorgeAusters11 ай бұрын
Did you watch the video?
@Challenger380aak11 ай бұрын
I did. I think my engine is the same as yours just like to confirm?
@Challenger380aak11 ай бұрын
Next week i will make the gasket like you have shown in the video. I spent $900 replacing gaskets. Its a shame, Mini engineers can never make their cars perfect.