MINI TUB Your C10! 16” Wheel WELLS Install on CHEVY C10 SHORTBED

We Show You How to Install AMD, Auto Metal Directs 16” Wide Wheel Wells to give Your Chevrolet C10 More Room for BiG TIRES and an AWESOME PRO-STREET L😄😄K!
Link to wide wheel wells!
www.autometald...
Check Out Our Previous Episode of OLD GUYZ GARAGE!!!
How to Center Your Chevy C10 or Hot Rod Rear End
• How to Center Your Che...

[@jeffreyfrench6986]

The best mini tub video I’ve seen, very step by step descriptive.

[@OldGuyzGarage]

Wow thank you so much Jeffrey! Really appreciate it! Please like and Subscribe if you haven’t already! 😎👍

[@gasngowithsnow]

This video is totally worth the time to watch. I am tubbimg the Hillbill-e Deluxe and this is the exact information I need. Thanks guys.

[@OldGuyzGarage]

Thank You so much gasngowithsnow for your Input and comments! This is Franky your host of OGG, We are really trying to bring good educating content to the automotive enthusiast world! Thank you for watching! Please like & subscribe if you haven’t already! We are interested in your projects and what you are building so send us a pic or two on dm @oldguyzgarage@instagram, we are going to start posting our subscribers projects at the end of some videos! Where are you at in the country? Thx Again 😎👍

[@exquisitearangement]

Factory '71&'72 dually Fleet sides had fat tubs like that with rubber flares to cover the duals. Cool mod

[@OldGuyzGarage]

Cool Good to Know thx for the tip Justyn! Thx for watching the channel please subscribe and share if you haven’t already. Some new stuff coming soon! 😎👍

[@bradleyedwards8807]

First person I’ve ever liked and subscribed to. Great videos, and very informative. Thanks.

[@OldGuyzGarage]

Welcome aboard! 😎 Thank You!

[@kennymac192]

Nicely done! Great video!

[@OldGuyzGarage]

Thank you very much!

[@inthefastlanebro]

Great video!

[@OldGuyzGarage]

Thx in the fast lane bro! 😎

[@westonlee9778]

Howdy nice build! Do you need heat Shields underneath the gas tank?

[@OldGuyzGarage]

No I’m going to run exhaust to side of tank out the bank or may have it exit before rear wheel on side! 😎👍

[@Jc1020A]

How low were you able to go did this increase the amount you were able to lower the truck as well? Thanks in advance.

[@OldGuyzGarage]

Yes we ended up dropping rear about 3 inches yes much more room for tires to clear!! 😎👍

[@mikelitviak1559]

Boss man, do you have any pics and rear tire/ wheel sizes of final set up? Video was very informative

[@OldGuyzGarage]

Thx Mike still have 15 x 8, and 15 x 10 Weld wheels on there with Cooper Cobra Tires! Thx for your inquiry hope that helps! I have had Foose 20 x 9’s on front and 20 x 11’s in back with factory wheel wells.

[@JohnAS-np5wd]

Great video. what width rim can you run i have the same setup...

[@OldGuyzGarage]

Thank You I’m glad you liked it! I haven’t tried to get the widest tire in there yet but I’m sure you can get 15 wide wheel with the right off set! 😎👍

[@simsrodriguez3545]

Best video I seen now I know what I'm going to get into thanks for sharing

[@OldGuyzGarage]

Wow Awesome thank you so much!

[@purointros3438]

Hey man nice work 👍 quick question would 24x12 with a 8 lip fit good without narrowing the rear? I am installing the exact wheel tube you have.

[@OldGuyzGarage]

Thanks really appreciate it! So let me know if I’m correct in what you are asking. You are asking if a 24 inch tall wheel that is 12 inches wide fit without narrowing rear end, right? The 8 inch lip is referring to the wheel off set? So sounds like the 8 inches is toward outside correct? So right now I have 10 inch wide wheels in there and there is plenty of room pretty sure I can get a 15 inch wide wheel in there so the 12 inches would definitely work it just depends on the off set. Narrowing rearend will not be necessary. Like I said pretty sure I can 15 inch wide drag wheels under there with the right offset. Hope this helps let me if I did not get your question straight or not! 😎👍. Thanks for watching appreciate you telling your buddies about our channel we are trying to grow it! Thanks Again good luck with your project! What kind of truck are you working on?

[@felipevaldez4983]

Excellent job

[@OldGuyzGarage]

Thank you Felipe!

[@jboodah1780]

LOOKING GOOD OTHER THAN THE MINI TUB AND GETTING THE AXLE NARROWED, WILL THE 15 WIDE WHEELS FIT WITHOUT GETTING TO THE LEAF SPRINGS AND OR FRAME? THANKS

[@OldGuyzGarage]

yes 15 x 15 wheels will fit without hitting frame and do not have to narrow rear end either!!

[@jboodah1780]

@@OldGuyzGarage thanks Boss

[@jaimeguardiola7884]

0

[@Alwayssomethinggarage]

Question: where did you purchase your 17 gallon fuel tank? Thanks in advance.

[@OldGuyzGarage]

Hello Johnny thx for watching and commenting! We got our tank at Brothers Trucks in Corona, California. 18009772767 😎👍

[@Alwayssomethinggarage]

@@OldGuyzGarage Thanks again.

[@elbergasjason494]

do you happen to know the size of the stock c10 tubs brotha?

[@OldGuyzGarage]

11 inches wide

[@ulisesjulio1792]

Loved your video. About to do mine, first timer. Can you list the type of grinding wheel you used to clean the edges; I think you used it to clean up your welds as well. Its also gonna be my first weld job.

[@OldGuyzGarage]

Sure, the wheel I got at harbor freight, I bought an assortment of different grind grits, 36, 50, 80, 120 I believe the one I used is 50 grit but 36 or 40 will work good the smaller the number the coarser or rougher the grind so it work faster but takes off more material the smaller the number or coarser the grind, same with sand paper! Great question thanks for asking please send me some pics when your doing it. You can follow us also on Instagram @ OldGuyzGarage! Thx for watching let me know how it goes my name is Frank

[@jaimeguardiola7884]

@@OldGuyzGarage mi

[@jummpin1]

how many inch drop did you go with the rear springs?

[@OldGuyzGarage]

We did a 3” drop spring but they only lowered About an inch because the previous owner heated up the existing springs to lower it! Thanks for watching! 😎👍

[@yeezuss1198]

Do you have the link to the tubs?

[@OldGuyzGarage]

www.autometaldirect.com/body-components-bed-wheelhouse-bed-wheelhouse-4-inch-wider-lh-or-rh-sold-as-each-67-72-chevy-gmc-ck-fleetside-pickup-69-72-blazer-70-72-jimmy-p-8236.html

[@OldGuyzGarage]

Here ya go! 😎👍

[@thefrostyvette876]

Good work, but I’m surprised that you didn’t have to cut out a piece of the inner bed wall to stop the rub there as well.

[@OldGuyzGarage]

Hi Grim you must have missed that part we did cut bed floor about 5 inches!

[@262ctb]

That is not seam sealer! How is holding up?

[@OldGuyzGarage]

Liquid Nails worked great! 😎👍