Interior Detailing Tips, Tricks, & Advice Part 2

[@Tommerd]

I use 303 Protectant on the interior. I like it.

[@chodkowski01]

I started using the Milwaukee 6” air tip vacuum attachment brush and in makes cleaning carpets faster and cleaner.

[@wescat2]

Phil I really like the interior videos. I learn a ton watching your technique. I just ordered one of those hoover brushes you use all the time. Really cheap and a very useful tool.

[@MirandaDetailing]

Awesome, thank you!

[@mynsxt6]

I purchased the ceramic car wash soap and it made my graphene coated car pop for real for real!!!!!

[@TripleGAutoDetailing]

👍👍Phil... these videos never get old. Love the back & forth with the "wifey". Amazing results. 👏

[@jerrodrawlinson9197]

Another great and informative video. Thanks guys.

[@MirandaDetailing]

Thanks. You’re welcome

[@fortmillautospa2023fortmill]

Hi Phil How are you doing? Nice video I’m in Florida doing two rare vehicles

[@MikesAutoDetailing]

Great job

[@MirandaDetailing]

Thanks Man!

[@robertknapp895]

Awesome video thanks guys I'll have to try some of Jay Leno haven't tried them yet try that for my wife's Nissan rogue leather seats your guys have a awesome day guys take care

[@23dothedew]

Jay Leno products have been getting a lot of positive reviews. Nice to know there are some quality products at Walmart if you need them! Nice work

[@MirandaDetailing]

Totally! They make some good stuff!

[@harryh6203]

@@MirandaDetailing Interesting!

[@ronayotte3571]

If you think that lower-end Mazda carpeting is terrible, wait until you get to do an interior detail on a Mitsubishi Mirage... the carpet in those is just like what you would find in the trunk!

[@millerdetailing4176]

Another amazing video Phil ,you and the misses always have the best tips and tricks.

[@extremeoptimumautodetailin6616]

Phil & Jess awesome job great turn around awesome tutorial for new comers and mobile detailers that do this on a daily base awesome products as well as always great job be safe God bless William from extreme optimum auto detailing pr

[@big-redsdetailingcliffords2379]

Checking in. Another great video guys! Thanks for bringing this knowledge to the detail community! Stay blessed Phil & Jess

[@MirandaDetailing]

Thanks man!

[@ShineYourLightDetailing]

Excellent video Phil, I love the explanations and you guys did another fantastic job! 👍🏼👍🏼

[@MirandaDetailing]

Thanks man!

[@poxdaccy]

Great work and passion

[@MirandaDetailing]

Thanks!

[@Breese147]

I love dedicated leather cleaners. Make the leather feel great IMO. Normally I don’t like 2:1 detailing products but I find the leather cleaners with very light conditioning agents like McKees 37 leather cleaner makes the leather feel super supple! Then I usually Follow up with gyeon spray on leather sealant.

[@MirandaDetailing]

Awesome! Thanks for sharing!

[@jamesbond7648]

Great video as always!!!!

[@paul6749]

Good work on that interior. Minimal leg room in the back of that Mazda! Just an observation….maybe would be better to vacuum and steam the carpet before cleaning the dashboard? Interesting you used a leather conditioner - I was under the impression that leather/vinyl is always coated in the factory to protect it and so conditioner won’t penetrate this coating. My go-to product for leather is the Colourlock kit which comes with a cleaner and a separate shield coating product. Did you mention some detailers remove carpet to clean underneath….wow, never heard that one before!

[@MirandaDetailing]

Hi. Thanks for the tips. Everyone has their Procedure. we always start from the top down, I've tried it the other way before and it doesn't really work for us, lots of backtracking still whether the dash and console is done first or last. I like to work in controlled sections around the vehicle. But again, everyone has their methods that work for them. As long as one is efficient, profitable, and the customer is happy, that's what matters right.😎👍 As far as leather goes, true its "coated" but still porous, the conditioning is not as it is for real uncoated leather, but rather for UV protection and a keeping it hydrated which is more important. So yes, not actual Real leather "conditioning" But still a very important part of the process. Thanks for sharing!

[@bereantrb]

Re:gloves. I’m assuming you’re talking about surgical style gloves? Maybe try the style with rubber palm & inside face of the fingers but have a stretchy breathable backside. I’ve seen a pair by Milwaukee that has thinner rubber than others of that style-very light & tactile.

[@MirandaDetailing]

Hi. Yes I’ve tried those types of gloves also and still, my hands sweat and It causes my hands to flare up. I’ve tried everything. It’s best for me to not wear gloves and simply wash my hands often…which I do.

[@MasrSR]

The Borat Quotes 😂😂😂👌 cool to see you using the JLG stuff !

[@carlosaltamirano4183]

Hey Phil, which tornador do you recommend best ???

[@MirandaDetailing]

I like this one bit.ly/3PdeFW3

[@en1254]

Hello Phil... I have a question if you don't mind... I'm detailing a Mustang that has glossy vinyl racing stripes on the hood, roof and trunk lid... Is it ok to use jescar powerlock plus on these?

[@MirandaDetailing]

Hi. Yes it’s fine to use a sealant on glossy vinyl. 😎👍🏼

[@en1254]

Thank you so much Phil.. I know the satin or matte black is a whole different story but I just wanted to be sure...

[@MirandaDetailing]

You’re welcome. Actually you can also use sealants on matte finishes. It doesn’t gloss it up or anything. Spray sealants are best for matte vinyl.

[@jjjjjjjjjjjhjjjjjhjj]

I tried tri clean for the first time and it bull dozed through the dirt, the only thing that works to take off stubborn blue make up and lotion stains Those carpets are the worst!!! I deal with those all the time air compressor make big sand storm to get the job done

[@jjjjjjjjjjjhjjjjjhjj]

What was the table you were using to do the mats on ? Do you protect plastics before or after windows ?

[@htorres860]

WOWW YEA BUT CHEMICALS ARE BAD TOO SOME TIMES I HAVE CHEMICALS THAT ARE VERY CRAZY 😳🔥✋

[@AF-lv1ev]

Hi Phil, great video and helpful tips. Qwik question: can I apply gtechniq C4 directly over Cerakote ceramic trim coat? The Cerakote wipes were sort of dry, and left a lot of steaking. Is there any way to fully remove the Cerakote, so I can appply C4 directly, and evenly? Thanks!

[@MirandaDetailing]

Thanks! If that happens just wipe it down with a panel wipe or Isopropyl Alcohol and then use the C4 Coating.

[@blackopsdetailingproducts]

Great videos guys! What steamer are you using here? Thanks all the way from Australia!!

[@MirandaDetailing]

Hi. Thanks. We have the Vx5000 steamer.

[@blackopsdetailingproducts]

@@MirandaDetailing damn, not available here... Looks like it works great

[@chrisryan8894]

Is there another distributor for jay leno products in Canada. ? CSW wants to charge 111$ to ship a single bottle, absurd 🙄

[@MirandaDetailing]

Hi. Perhaps local Walmarts. They sell here in Walmart also

[@chrisryan8894]

@@MirandaDetailing Walmart in the US does. Not here in Canada. Only place I’ve seen is Amazon, but it’s 60-70$ for a 16oz bottle. Oh well. Pass for now. Thanks for showing the products though

[@MirandaDetailing]

Aw man! They are showing no love for my fellow Canadian detailers!! Sorry man.

[@kimnewling5728]

Quick question: I applied CSL to a motorcycle and would like to put on EXOv4. I applied CSL on Sunday (4 days ago) and would like to put on EXOv4. Is there any prep I need to do? Bike was in garage for the 4 days, and not exposed to elements. Bike may have tiny bit of dust. Thx!

[@MirandaDetailing]

Hi. You could blow down the motorcycle to get any dust off and just apply EXOv4. Since it’s been 4 days Im j no it sure exactly the effects or if it will bond probably however.

[@marioskosmidhs9454]

Dear phil sir, this is your basic exterior diamond detail service? Wash clay wax + interior ? I know you are 2 persons but...on average for this size how much neat time do you need? My kind regards

[@hartlanddetailer5670]

Fellow detailer, I believe you are asking how long it took Phil & his wife to do a full detail? If so, no two details are alike, some full details take about 12 hours, some take about 30 hours. Because of that, I charge by the hour, not by the job.

[@MirandaDetailing]

Hi. It’s not really considered a basic service, it is a full interior and exterior detail. Depending on the condition of the vehicle it can could take 2 hours or 5 hours for the two of us.

[@jamesbond7648]

Why not use a Bissel spot cleaner to clean the carpet? Wouldn’t it be easier?

[@MirandaDetailing]

Hi. Good questions. Sometimes we do if it’s necessary, but that can leave the carpets oversaturated. Steaming and using the tornador blower if faster and leaves the carpets dry within minutes. 😎👍🏼

[@jamesbond7648]

@@MirandaDetailing awesome reply!!! Thank you!!! Your wife is awesome!!!

[@danielimpellizeri5893]

Hey Phil, what kind of extractor do you use?

[@MirandaDetailing]

Hi. It’s the older style Myteelite 8070

[@sikkinixxmc]

Im assuming this is your wife. I love it!

[@MirandaDetailing]

Sure is! 😎👍

[@jamesbond7648]

May I know how long to complete the whole process?

[@MirandaDetailing]

Hobbits to say since filming takes an extra hour or so of the time. But on average our full details can take 3-5 hours with the two of us.

[@jamesbond7648]

@@MirandaDetailing I mean just for interior cleaning is 3 to 5 hours with both of you? How much will charge this experience?

[@carlosaltamirano4183]

Hey Phil, which foam cannon do you recommend?

[@MirandaDetailing]

This is still my favorite amzn.to/3RqBIy3

[@carlosaltamirano4183]

Thank you so much

[@jeffreyrobert9460]

Great video Phil. The leather seats in my G37 are perforated. I’ve used leather cleaner and a leather brush, but can’t seem to get the dirt out of the perforations. Any advice on this would be appreciated. Hi Jess✌🏻

[@MirandaDetailing]

Hi Thanks. Sometimes its a matter of painstakingly picking at it, or if you have an air compressor with a a good nozzle that will help dislodge those particles also.

[@jasongomezmma]

Try a detail tooth brush with the white stiff bristles with air or worst case grab a toothpick but be careful not to over stretch out the holes. Also sometimes the actual side wall of the hole is stained so might not look 100%

[@jlb3675]

Why no gloves?

[@MirandaDetailing]

I c go any wear gloves for extended periods of time. I get contact dermatitis extremely bad. It’s better for me to simply wash my hands often. I have been dealing. With this for over 15 years and found that wearing gloves was worse for my hands unfortunately.

[@404notfound.....]

1st 🇨🇦

[@htorres860]

U DETAIL NICE CARS 🚘 I DETAIL VERY NASTY DIRTY CARS AND TRUCKS

[@MirandaDetailing]

kzbin.info/www/bejne/fmrcnntjhbuGbMk kzbin.info/www/bejne/f4TVfmeKYt9oeLM kzbin.info/www/bejne/o3fclalnmbOGfrs kzbin.info/www/bejne/n3LIq6aIp659q5I kzbin.info/www/bejne/rKHOkmh7p7JphKM kzbin.info/www/bejne/r5ucdq2jqcygjJo kzbin.info/www/bejne/hYuwhnWGj96Sask kzbin.info/www/bejne/hXvRk5JnZrhkiLs We have more. Look through our channel. Enjoy. 😎👍🏼

[@MikesAutoDetailing]

I like the smell of that fabric cleaner also

[@Tommerd]

I love your channel, but it makes me puke when I see these expensive cars that look like pig-pens. OMG. What the hell, people???

[@1stfrompuertorico568]

3rd