⚠️ ALL IN ONE POLISHES WORK BETTER THAN YOU THINK!

[@mikeeonfiya]

Good stuff Phil! If anyone isn’t aware, 3D Speed is a combination of 3D One’s abrasions & 3D Poly’s montan wax. It’s an absolute pleasure to work with, especially with a uro fiber pad. You can pre-stage and put droplets of Speed around the car, buzz around it, then wipe off as you round rosy. Could definitely top off with Bead It Up for prolonged protection & hydrophobics.

[@MirandaDetailing]

Thanks! It used to be a combo of HDpolish when it first came out. But I don’t think they make HDpolish anymore after they discontinued the HD line. However it doesn’t feel or react on the paint like 3D One, but maybe they changed the formula after coming out with 3D One.

[@hernansalazar2158]

Very well put video. Explanations and examples are clear and straight forward. I appreciate your videos. Cheers

[@MirandaDetailing]

Thanks!

[@404notfound.....]

And considering the most BMW s clear coat is on the hard side. It's a pretty amazing product!! Great video phil!! 👍🏻 🇨🇦

[@lewisreinhold6398]

I’ve been a great believer in AIO’s , right back to when they were cleaner/waxes . I’m really loving your latest videos Phil!

[@MirandaDetailing]

Thanks! 😎👍🏼

[@thatdude3832]

3D Speed! Easy to use and Corrects like a beast!

[@davestewart9146]

I really appreciate all the time and effort in this video to educate us, thank you Phil 😁👍

[@MirandaDetailing]

Thanks!

[@laautodetails]

I've used 3D Speed. Really good product. It lasted around 2 to 3 months. It is very easy to apply and remove and can be used in sunlight. I have switched to CarPro Essence for its ceramic protection and can be used as a primer for coatings. Great video, like always.

[@MirandaDetailing]

Awesome! Thanks for sharing!

[@moisesperez3693]

Good job .... 3 D speed is fantastic

[@geddycostello8439]

3D One Is amazing love that product.

[@jonnyshielldetailing]

Great explanation and alot of value right there for beginners.

[@MirandaDetailing]

Thanks man!

[@_Mailman]

Excellent again. Debunking myths with testing as it should be done. Great work

[@MirandaDetailing]

Thank you!

[@jeepinspence]

I agree bro, I agree! I've been using using 3d speed and 3d one, and love em, CG aio not bad, Griots BOSS, Sonax, Koch Chemie, Meguiar's, CG P4 and C4, and their 4 partr system, I'm not a fan of CG. Not because it didn't work but it's 80s tech. you get a ton of fling and it dries very quickly. The rest aweome! Heck I still use Meg cleaner wax in a pinch once in awhile. I DO like the CG hexlogix pads, I find them comparable to the LCC. Keep it up bro. The common sense you use has always served me well also! lol

[@MirandaDetailing]

Thanks for sharing! 😎👍🏼

[@danlc95]

I still like Megs M06 Cleaner Wax.

[@TheFinalDetails]

I've used Blend for a one step and then topped it with the Blend Black edition. Worked great and looked great after. Every Vonixx product I've used has been good.

[@MirandaDetailing]

Thanks for watching and sharing! 😎👍🏼

[@KRensch45]

Love Vonixx blend. Did a red truck and turned out amazing!

[@MirandaDetailing]

Awesome! Love to hear that!

[@neilwalker5041]

3D Speed is a goated product and it just works. I am sure you too have used the orange LC pad or the 50/50 pad with outstanding results. Thank you for this video which needed to be made.

[@MirandaDetailing]

Indeed! Oh yeah!

[@DonaldBolton-c5t]

I did on a black bmw I3 Uno protect, 2 passes with rupes medium yellow wool and got great results. It does remove light swirls . Top it with clean maker !

[@MirandaDetailing]

Awesome! Thanks for sharing!

[@joevanseeters2873]

Good information Phil as always. I just got the Technicians Choice Ceramic One Step Primer Polish. I am going to top it with the newer version (EU version) of Fusso Coat as the base sealant layer over the Tech Choice Ceramic one step polish, then use the Technicians Choice Ceramic Detail Spray as the drying aide weekly diluted 1:1 and then once a month with the Ceramic Detail Spray neat. Curious to see what longevity I can get from it. My car is garage kept all the time so I should get some good durability out of that combo. I also just got the new Gyeon Total Remover as I like trying different products after a while so the Total Remover can strip off any of the old sealants before I try something else down the road.

[@MirandaDetailing]

Thanks. Awesome! Thanks for sharing!

[@coreymerritt7742]

Hi Phil i also use 3d speed I like it a lot but I recently used p@s playmaker it is quite similar to 3d with beading quality 👍

[@MirandaDetailing]

Awesome! Thanks for sharing!

[@1stfrompuertorico568]

Yes, awesome

[@functionaldoc5054]

Phil a great instructional video. So how does your Rupes cordeless compare to your SPTA cordless polishers?

[@MirandaDetailing]

Thanks! I filmed a video on that. I just need to edit it soon

[@johnmelling9950]

Ive been using Speed and 505 correction glaze (also 3D) for a few years now and i can tell you that my findings are the same as yours. When used properly, they remove the swirls. When i get the cars back in after a few months, they still look great. I use the Flex forced drive polisher and either the Lake Country orange or blue pads, or something similar. Most of my machine polish jobs are one steps using these products and if worked for 6-8 passes starting with heavy pressure then finishing up with light pressure, i can get 95 - 100% defect removal on softer paints and 80-90% on harder paints. Usually all that remain are the random deeper scratches that require wool and heavy compounding. The 3D 505 has a little more cut than Speed but Speed leaves more of a wet look finish due to the silicone polymers it contains. Both great products that id be lost without. The reason i prefer them over using a true compound like 3D ONE is because the wax content in them makes the wipe off quicker. Once done with the one step i normally wipe over with 3D Bead It Up and it boosts the gloss further and bolsters the protection.

[@MirandaDetailing]

Awesome findings!! I haven’t tried the 505 version yet but heard it’s awesome like you mentioned. Thanks for sharing!

[@kevkav5680]

What a great video to Phil about learnt so much, thankyou

[@MirandaDetailing]

Thanks!

[@tucksmith8300]

Looks good Phill

[@adammathews9246]

As always awesome content and great advice!!👍🏻👍🏻

[@MirandaDetailing]

Thanks!

[@Spirited282]

Another great video, thanks Phil

[@MirandaDetailing]

Thanks 👍

[@traviscrown9189]

Would 3D speed be a good water spot remover?

[@MirandaDetailing]

If paired with a microfiver pad it can cut through water spots if they are not too old or hard etched. But first hit the water spots with a water spot remover to get the initial minerals, then tackle the remaining spots with a polish

[@jaredemmanuelganesan7623]

Awesome informative video as usual 👌. Would love to see a video on paint thickness gauges if you haven't done one.

[@MirandaDetailing]

Thanks. Good idea!

[@davidblalock1709]

The guys over at detail ground told me that Vonixx retooled blend to add a bit more cut to it. I've used it a few times and absolutely love it.

[@MirandaDetailing]

Cool! Yeah it’s awesome stuff!

[@waynefromnewfoundland8740]

I like these videos. But honestly, I never understood when to use an “all in one”. From a time perspective for professionals, I see the application, especially if you have regular customers. I have used them but honestly couldn’t say if they performed like they were intended. Still a great video, learned some new things, which is always a good thing, and I will give them a another go when the situation arises. Till the next one.

[@MirandaDetailing]

Thanks. Really? Interesting, I used to use them more on noir mobile polishing services years ago. Never let me down. They always preformed incredibly well.

[@completeturnarounddetailin3536]

Really great video! One of my favorite products to use is Hybrid Solutions Ceramic Polish

[@completeturnarounddetailin3536]

usually top with Flex Wax

[@MirandaDetailing]

Awesome! Thanks for sharing.

[@rooboy99]

Thanks for the video Phil. Dont see AIO's mentioned much these days. I used Angelwax Enigma AIO a couple of years ago. Seemed to do well on harder paints.

[@MirandaDetailing]

Thanks for sharing! 😎👍🏼

[@dannyboy8644]

Very grateful for your videos 😊

[@MirandaDetailing]

Thanks for watching!

[@chelsabailey1018]

Hi Phil. Cool video! Could the Turtle Wax 1 And Done Precision Platelet be used with a Yellow Rupes Pad in the same manner as shown in your video?

[@MirandaDetailing]

Hi! Yes it can! That’s exactly how it should be used. You will get awesome results.

[@Hutch400]

Thanks Phil! Liking the Rupes polisher?

[@MirandaDetailing]

Your welcome. Yeah it’s nice.

[@uniqueautospa]

3D speed with a microfiber cutting pad is a great combo.

[@MirandaDetailing]

Indeed!! 👍🏼👍🏼

[@smokintheghost]

Any benefit to applying a coat of 3D Poxy montan wax just after HD Soeed (which has montan wax)?

[@MirandaDetailing]

Hi. Yeah it definitely give the protection a boost since they are the same formula.

[@Kevindill-x3k]

Can you use the 3d speed then put ceramic coating on top of it

[@MirandaDetailing]

Hi. Nope. It’s not formulated for that. Dr Beasleys NSP primer polishers are formulated for polishing and application of a ceramic coating without a need for a panel wipe.

[@eppyz]

Any benefit of using 3D Speed over 3D One?

[@bkeets3]

@@eppyz speed has protection, so it’s an AIO. If you use one you’d have to follow up with a protection like a wax, sealant, or coating.

[@eppyz]

@@bkeets3 ok got it, thought 3D One was an AIO.

[@MirandaDetailing]

Exactly what Bkeets3 said! 😎👍🏼

[@tundrawhisperer4821]

What the difference between 3D speed and 3D One? Thx

[@MirandaDetailing]

Hi. Great Q! So 3D One is a hybrid compound polish. Similar to Speed its pad dependent and can cut really well and polish really well when paired with the right pad. Speed doesn’t cut as much, and it also has protection built into the formula where One does not. So One is not considered an AIO polish.

[@tundrawhisperer4821]

@@MirandaDetailing Ahh…okay, Thank you Phil. I have a 2018 Charger, would you use a euro 50/50 pad on this clear coat? From what I hear, it’s on the hard side for clear. Thx for the videos!!!

[@MirandaDetailing]

You’re welcome. Not sure, you will have to do a test spot first. No way of know years and models now and how their paint is. Always do a text spot to determine what it needs. 😎👍🏼

[@AZULYORO4LIFE]

I really like vonixx But thy did change the bottle or that is the new version the one i have is like green bottle ☹️ i will keep vonixx until run out i have the k c watting on line I use vonixx whit the one step polish pad of adams i have not used the yellow😭

[@High-Performance-IQ]

​@@tundrawhisperer4821 your charger is too slow.... You must charge it.

[@Apexmissed]

Are the pock marks because the clear is almost gone? I have that on my black car after paint correction and not sure what it is from. Any idea what these pocks are on the bmw?

[@MirandaDetailing]

Hi. No it’s usually from tree sap or other forms of particles that land and etch those tiny dots on the paint.

[@lewisreinhold6398]

How do you like the Rupes HLR?

[@MirandaDetailing]

Yeah it’s nice, I have a video I need to edit where I compare it to the SPTA we usually use.

[@lewisreinhold6398]

@@MirandaDetailing it sounds and looks nice Self appointed experts tell me not to buy anything Rupes but you know what? I love every product I’ve bought I learnt long ago to find things out for myself I’ve been detailing for 55 years now and still love it I’m thoroughly enjoying your ‘Balderdash’ videos!

[@MirandaDetailing]

@@lewisreinhold6398 thanks!

[@Jaysmobiledetailn]

I don't think the protection was still there, I think it was just the paint was so clean that it was beading water, try another test using 3D one, then we'll know if it is the protection still there.

[@MirandaDetailing]

Very possibly so. The test was to see how an AIO in particular can remover defects, because so many people think it only fills. I definitely know that 3D one can. It’s also awesome stuff! Thanks for watching. 😎👍🏼

[@KyleHampton-v8e]

Shoutout from Arkansas

[@MirandaDetailing]

Welcome!

[@KyleHampton-v8e]

@@MirandaDetailing long time viewer I watch most of your videos! Glow n shine detail in Little Rock Arkansas

[@petebrandstrom1038]

Use Speed with age and color and storage of the paint/vehicle as determining factor.

[@Zahidhadi501]

Hi, will you be reviewing Pans' own new CLEAR Range ?. It supposed to be the top range.

[@MirandaDetailing]

I will most likely use it at some point.

[@StevenTest-h1c]

A video from autogeek ( I think) with the owner or ceo of 3d said the only difference between 3d speed and 3d one was the protection in speed

[@MirandaDetailing]

When 3D speed came out it was actually HD Polish as the base. It feels very different than 3D one.

[@beijingbiden5931]

@mirandadetailing how to tell if paint is hard or soft?

[@MirandaDetailing]

Hi. You can only tell once you do a test spot polishing. I start with a medium pad and polish and see how the looks after that it needs more cutting then the paint is harder clear , if it removes the majority of swirls it’s softer clear. It doesn’t go by year, make and model anymore.

[@kimnewling5728]

First of all, how do you like the Rupes polisher? And second of all, do folks say that a.i.o. are fillers? I've polished a black Ford truck to about 90% defect free, only to have it come back completely swirled again by the owner. I took pictures of the hood both times, and swirls were completely different. Polish didn't fill in and wash off. Good proofing video, Phil. Hi wife

[@MirandaDetailing]

It’s pretty good! I have a video I still need to edit on my thoughts on it. Yeah I have talked to many detailers and watch detailers on KZbin say that AIO only fill. But perhaps more people have used them properly since then and that idea is know myth busted. I started using 3Dspeed years ago when it came out and used it the same way we use it today and got awesome results, then I would comment in forums and tell people that it’s awesome and actually corrects and I would get thrashed for saying that!

[@1stfrompuertorico568]

​​​@@MirandaDetailingPhil, many times I have used it too and until I have showed a couple of my friends here they can correct because I move slower then they see it better. Thanks for having a video for more people to learn really about it. By the way, I have done it with my old workhorse GG6 and my G9 and G8 too 😜 I always have issues with flat pads and I prefer using the non flat pads with soft paint and AIO, so I attribute that to the soft paint since I have always also noticed that sort of difference between hard and soft paint. Basically, with flat pads on soft paint any polish is more grabby than with hard paint. So, that's why I prefer using the non flat pads with soft paint. I don't know if you have also noticed that or it's just me? Thanks for your input in advance.

[@rongamble9884]

I have fell victim to the fad of short and long throw polishers from many companies when all else fails if it's not broke don't fix it I'm old school and Mike phillips will back me on this but the only true way to go is good Ole rotory buffer and wool pad

[@MirandaDetailing]

Rotaries are great. We still use them sometimes. But I don’t compare one to the other. Each has their place and each Detailer can choice what they want to use according to what they personally find to work for them. I don’t cater to “this is the only way” Detailer rhetoric. Use whatever works for you. But I tell Detailers to be careful about saying what the “best” there is no best product or tool. It’s objective and personal choice

[@rongamble9884]

@@MirandaDetailing however I don't detail vehicles anymore couldn't handle people's disappointment of having high expectations of there vehicle looking new so I just stay with restoration and custom painting now

[@MirandaDetailing]

Wow! You Thad that many people act that way? I have had only a handful in 15 years that had incorrect expectations after our services. What’s your demographic?

[@VictorHernandez-nt3tw]

If people are actually telling the truth or just talking because they like to attack Ytubers, then if swirls return it's probably because they don't know how to properly dry or remove the stuff safely. 😂

[@MirandaDetailing]

Exactly! It comes down to ignorance really.

[@Juicefree]

Saying a all in one does not correct is pretty nieve a finishing pad by itself ha some form of correction

[@averagedetailer9908]

Agreed

[@MirandaDetailing]

Exactly!

[@danlc95]

Absolutely. I use a lot of the black Buff and Shine pads with Speed, and they're almost on part with the orange B&S pads as far as correction goes.

[@moisesperez3693]

Gotta vote, BLUE, baby 💙