Missing Antenna Coil | How to Calculate Inductance & Build One

  Рет қаралды 951

RestoreOldRadios

RestoreOldRadios

17 күн бұрын

Building a replacement Antenna Coil for a MECK DA-601 TRF receiver using a Ferrite Toroid F50-61 after calculating the required inductance then winding the secondary w/ 28 AWG magnet wire and the primary w/ 26 AWG magnet wire.
Excel formula example for the secondary based on my TRF receiver:
=25330/((437-13)/(((1.7/0.535)^2)-1)*1.7^2)
A great resource:
toroids.info/FT50-61.php
LC Calculations Made Simple
• LC Calculations Made S...
Thanks for watching and subscribing to my channel on vintage radio repair and other related circuits.
#restoreoldradios

Пікірлер: 12
@DERB_Seymour_Indiana
@DERB_Seymour_Indiana 14 күн бұрын
Very nice work Don. I like the way you figure this stuff out. :)
@RestoreOldRadios
@RestoreOldRadios 13 күн бұрын
Much appreciated Doug. Thanks again. Best, Don
@richardbrobeck2384
@richardbrobeck2384 15 күн бұрын
Nice job !
@RestoreOldRadios
@RestoreOldRadios 14 күн бұрын
Thank you, I appreciate it. Best, Don
@W1RMD
@W1RMD 14 күн бұрын
Great video! I've always been to afraid to build anything with toroids. I've got some from a hamfester years (decades) ago but I have no idea what mix they are and have no idea how to test them so in the junk box they stay. I would LIKE to be able to use them. Thanks for sharing this valuable information with us. Nice to know there is other options out there if I ever get a radio with a bad oscillator coil. Your videos are short, sweet, and to the point. Thanks and take care Don!
@RestoreOldRadios
@RestoreOldRadios 13 күн бұрын
Ryan - place 10 turns of wire on the Toroid and use this formula: uH=(AL*Turns2)/1000 Then use this page as a resource to understand the AL for the particular Toroid: toroids.info/ Hope this helps. Best, Don
@W1RMD
@W1RMD 13 күн бұрын
@@RestoreOldRadios Great! Thank you. I'll give it a go. I appreciate all you do here.
@Madmacman4296
@Madmacman4296 14 күн бұрын
Very nice music great perfect job thanks
@RestoreOldRadios
@RestoreOldRadios 14 күн бұрын
Thanks for listening/watching and reaching out. All the best. Don
@RepairRadioLab
@RepairRadioLab 14 күн бұрын
is it the same formula to make a bandpass filter for fm receiver?
@RestoreOldRadios
@RestoreOldRadios 14 күн бұрын
A good resource for that application: leleivre.com/rf_chebyshev_BPF.html Best, Don
@XPFTP
@XPFTP 15 күн бұрын
just come across this channel and vid. if i wish to read i would get a book. iam out
Grunow - Model 654 | Receiver Assessment Pre Restoration
17:52
RestoreOldRadios
Рет қаралды 691
How INDUCTOR's work & How to make your own
15:55
Schematix
Рет қаралды 856 М.
Khó thế mà cũng làm được || How did the police do that? #shorts
01:00
Nutella bro sis family Challenge 😋
00:31
Mr. Clabik
Рет қаралды 11 МЛН
Test your feedline for common mode noise and shorts
9:48
learnelectronics
Рет қаралды 50 М.
BOY SCOUT CRYSTAL RADIO UPGRADE
8:02
squarewave2
Рет қаралды 139 М.
Restoration of a 1960 RCA Victor transistor radio
9:22
Frank's Place
Рет қаралды 907
Finding Loop antenna resonant frequency
23:23
W1VLF
Рет қаралды 49 М.
Antique Radios | Wave Trap & Antenna Coil
4:07
Flux Condenser Vintage Audio Electronics
Рет қаралды 6 М.
#151: How to wind a toroid inductor | A quick tutorial
8:11
Ferrite: Those magic thingies at the end of your cables
6:09
ScottiesTech.Info
Рет қаралды 87 М.
Simplex Model PB - I.F. Transformer Alignment | Out of Circuit M&P
5:23
Building a 9:1 UNUN With FT-140-43 Toroid.
9:21
Radio Prepper
Рет қаралды 41 М.
Hisense Official Flagship Store Hisense is the champion What is going on?
0:11
Special Effects Funny 44
Рет қаралды 2,8 МЛН
Как слушать музыку с помощью чека?
0:36
Tag her 🤭💞 #miniphone #smartphone #iphone #samsung #fyp
0:11
Pockify™
Рет қаралды 22 МЛН
Gizli Apple Watch Özelliği😱
0:14
Safak Novruz
Рет қаралды 7 МЛН
⚡️Супер БЫСТРАЯ Зарядка | Проверка
1:00