Now here's the ultimate question. Can a horizontal shaft be run vertically?
@MisterdionneYT4 ай бұрын
hummmm ?????
@Subscribe_to_samgamzs4 ай бұрын
that's what I'm wondering i would love to put a pred 212 in a mower mounted vertically
@xbrun33564 ай бұрын
At least for a little bit you can
@XanderStevens-7774 ай бұрын
mine will in a wheelie, you will have oil starvation if you dont upgrade the oil pump and put a tube that picks it up from the back of the motor
@easton_F3504 ай бұрын
@@xbrun3356technically anything can do anything for a “little bit”
@BodieBolton064 ай бұрын
You just solved a mystery that I'm sure a bunch of us have had for ages😂😂😂
@MisterdionneYT4 ай бұрын
yeah ! i been thinking about that for weeks ! had to try it ! now we know haha it might blow up eventually but it ran for 3hours no problem
@reesemolloy61094 ай бұрын
That transmission is a peerless 2300 series and that mower is amazing
@MisterdionneYT4 ай бұрын
ohh ok ! it seem like a heavy duty transaxle ! looks tuff
@reesemolloy61094 ай бұрын
@@MisterdionneYT yep 1 love the 1 inch axle I have that transaxle in all of my 7 mowers😂 they are the best
@Gavinadcock-q2z4 ай бұрын
When you said peerless 2300 I instantly thought about the John Deere 110
@YonyLeclair74 ай бұрын
What in the scooby snack was that laugh 3:43
@MisterdionneYT4 ай бұрын
hahaha !
@wrench56924 ай бұрын
Don’t believe it has a rev limiter just lack of fuel as you said. Pulse pumps work great on those things
@zakburnett66904 ай бұрын
It's supposed to be governed it's likely valve float, it will kill it eventually even if it is running out of fuel that will kill it even faster they hate being lean
@Modified_discover_4 ай бұрын
Hello
@truckercarterO94 ай бұрын
Could've said accelerator pump but that works
@zakburnett66904 ай бұрын
@@truckercarterO9 no lol those are different things, he's talking about a low pressure vacuum/pressure powered fuel pump they're run on the pulse from the crankcase made by the engine and they're very common on lawnmowers, he'd have to go to a motorcycle or powersports carb to get an accelerator pump of any kind, you can rig something up to act similar to an accelerator pump tho
@truckercarterO94 ай бұрын
@@zakburnett6690 oh ok
@gruntystuff11 күн бұрын
That giggle while the short timelapse 😂
@zakburnett66904 ай бұрын
😂😂😂 this is like giving some to a five year old and saying have at it 😂😂😂😂
@YT_Gamer-ro9fq4 ай бұрын
Its so exciting to see your videos and love your ideas😊
@MisterdionneYT4 ай бұрын
Glad you like them!
@ardennielsen37614 ай бұрын
0:34 camshaft valve "tappets", also more commonly knows as lifters.
@zakburnett66904 ай бұрын
Nope just tappets lifters are different
@Tom-em3dv2 ай бұрын
The scooby laugh was perfect made me laugh
@FooDerr4 ай бұрын
Great video, it's surprising how the engine's surviving like that!
@MisterdionneYT4 ай бұрын
its still alive haha
@damianlipscombe83154 ай бұрын
Errrrr I'm pretty sure that engine casing is not cast iron and is actually alluminium but nice try with welding a steel nut into it.
@jaredlancaster41374 ай бұрын
I was losing it........ "cant weld to cast iron" well no not if its aluminum
@MisterdionneYT4 ай бұрын
is it really aluminium ?
@adamlahd19164 ай бұрын
Yes it’s cast aluminum
@ssaw884 ай бұрын
Yes aluminum!!!! Use a magnet when in doubt
@wilsondriver6544 ай бұрын
@@MisterdionneYTyes haha
@powwer1233 ай бұрын
This channel gave me How to basic vibs, So I subscribed.
@bwood2823 ай бұрын
That case is made from cast aluminum, that’s why you can’t weld it. Even if you tried tig welding it it doesn’t turn out well
@coburnlowman4 ай бұрын
It's probably valve float that's causing it to flutter.
@jasonstclair62934 ай бұрын
Imagine owning a welder, but not being able to tell what type of metals you are working with.
@MisterdionneYT4 ай бұрын
im learning my guy
@jasonstclair62934 ай бұрын
@@MisterdionneYT Alright I'll give you that one... we all started somewhere!! It was just too easy and I was feeling like a prick.
@MisterdionneYT4 ай бұрын
@@jasonstclair6293 its because on the engine it say cast iron bore so i thought it was all cast iron since the engine weighs a ton ! ( cast iron is really heavy )
@jasonstclair62934 ай бұрын
@@MisterdionneYT Unfortunately it's just a cast iron sleeve in the cylinder. A lot of the weight comes from the flywheel which is also some form of steel / iron.
@YT_Gamer-ro9fq4 ай бұрын
You need to fix the mixture on the carb so you can remove The rev limiter😂
@the_mystery98034 ай бұрын
thats sick man, epic motor for lasting so long!!
@ssaw884 ай бұрын
You would have been far better off tapping the aluminum engine case for the new fill plug and just leaving the fill plugs in the old holes.
@gamingfuchs93314 ай бұрын
i love how you realy think about everything
@richardmang25582 ай бұрын
I need to do the opposite. Mount a horizontal shaft engine vertically. Since I am in California I cannot legally buy a new engine for my riding mower. My engine had something try to exit the crankcase via a non-engineered exit hole. Harbor Freight has only small vertical engines, I need a 17 HP or larger. But Harbor Freight does have large horizontal engines. Engines For Less, and other vendors, will not ship their 17 HP vertical engines to California. This video has me contemplating doing a similar modification.
@imrox890516 күн бұрын
Do you have a new vertical shaft engine?
@jamesgravel77554 ай бұрын
All you have to do is buy the horizontal side cover and retrofit it with a motor plate. It’s the same thing basically.
@KevinRMoore3 ай бұрын
With that crawl low gear, it would make a cool half-track
@dannydecare21164 ай бұрын
I've done this a bunch of times You undo one bolt and the connecting arm to the crank shaft. Take a piece of coffee can or soup. Can bend it in a way that will scoop and throw oil. Make sure you rotate it. So it's not hitting. Anything I used to make Go-Karts with them all the time.
@freedomisntfree_443 ай бұрын
You can make or buy the little oil splasher that connects to the connecting rod for horizontal engines… I’ve made a few mower engines work that way
@DatBlueHusky4 ай бұрын
its always been a thing to do it on the cheap, you just fill the crank case enough that the rod can dip into the oil. It wont last forever but will be enough to have fun with for awhile. Other things ive done is just get a piece of sheet metal and make a dipper and bolt it to one rod bolt, works well.
@hotrodZack19483 ай бұрын
Tecumseh engines and briggs engines are both great. They were our go to engines for go karts and mini bikes back in the day!
@Voo_Doo_Blue3 ай бұрын
Briggs flathead all day, 'the junk says' were exactly as named... If you could find a Wisconsin or a Kawasaki on the west coast back in the 70's, you were king shit among minibikers and gocarters. 😊
@vancemacd63154 ай бұрын
I always knew it was possible. Awesome video. Cabt wait to see upgrades. Bigger jets for more fuel, advance timing to maximize top rpms. Very cool.
@MisterdionneYT4 ай бұрын
Thanks !
@daxamillion01464 ай бұрын
Lovin the videos cant wait for more! tbh your giving me hope on my mud mower project🙂
@Gizmos_and_stuff4 ай бұрын
sound effects were on point
@TheHungrySlug4 ай бұрын
Ok, you are giving me some good crazy ideas. Thanks
@MisterdionneYT4 ай бұрын
Glad to hear it!
@TheHungrySlug4 ай бұрын
@@MisterdionneYT My son doesn't see the appeal, Since I got a polaris outlaw 90 for $30 bucks from the rubbish dump and see it as parts to make things from, not a bike to fix. hahaha. The thing is missing the flywheel/starter-clutch and variable drive primary. And also the cvt housing cover. Still. Thanks for the inspiration!
@pauledwards71823 ай бұрын
There is a special cast welding rod and you need to torch the area your welding to a certain temperature to weld cast.
@Tom-em3dv2 ай бұрын
Your good at beatboxing to lol
@OhWizzer4 ай бұрын
Oh we building engines now! Lol
@EJGT070612 күн бұрын
How do you tell which gear is which? Is it just a muscle memory?
@Midwest_Gaming_Express4 ай бұрын
your engine doesnt have a rev limiter its just that at that rpm is where you float your valves if you want to get more rpms out of it you need beefier valve springs but that comes with risks like exceeding any speed limitations that the crank and cam might have andafter a point maby how strong your valves are
@jonschick3 ай бұрын
I mounted one that way on a homemade mini bike in the late 60’s. It survived. I had to use a different carburetor though.
@cloveless234 ай бұрын
The idk parts are lifters for the valves.
@MisterdionneYT4 ай бұрын
ok i didnt know how to say it because i am french haha
@doglegjake67884 ай бұрын
Thanks for sharing a great video
@MisterdionneYT4 ай бұрын
Glad you enjoyed it
@SumProject184 ай бұрын
Awesome content!! Love this!
@memfusboi3 ай бұрын
You don't need a torque converter if you have a transmission. That's like having 2 transmissions.
@Smallenginesgalore4 ай бұрын
That is awesome! I loved this video. Your welds are looking better too, just got to play around with the settings and you will have great looking welds! if I were to make a suggestion on what setting to change,(not a journeyman welder, so really, don't count on my info to work perfect) I would turn down the wire speed a little. Let me know how that works for you. Thanks for a great video!
@MisterdionneYT4 ай бұрын
haha thanks for the tips and tricks ! but unfortunetly the welder i am using doesnt have a wire speed setting ! it regulates the wire speed automatically with the amps
@mikehatter18004 ай бұрын
That looks like cast aluminum
@sambrown64264 ай бұрын
I just got my first car! She's a 2009 Buick Lucerne, and she belonged to my mom's friend's late grandfather. She's practically new, there's no rust, no tears in the seats, no stains on the interior, the headlights aren't foggy, she was even garage kept her whole life. Unfortunately, they are known to have some fairly serious reliability issues, mainly relating to the electrical and fuel systems, as well as faulty water pumps, though the powertrain is pretty durable minus the previously mentioned water pumps. I'm still super happy with her though, and I'm very proud that I've actually managed to save enough money to buy a car and still have about $2,000 in savings left over.
@everettstormy4 ай бұрын
hell yeah! treat it right and do your own maintenance youll learn a ton.
@rcparts3d8934 ай бұрын
hell yeah thats awesome! Just remember to change that oil often and do your other maintenance such as transmission fluid/filter services, power steering, coolant, brake fluid, brake pads, ect.
@sambrown64264 ай бұрын
@@rcparts3d893 And replace the fuel filter ever 20-30,000 miles, because apparently if you don't do that with this car, the fuel pump dies.
@hunterprice321Ай бұрын
Can you use an axle vertical?
@charliejones75744 ай бұрын
Welding steel to aluminum rarely works. Those engines had aluminum blocks. Where a plug would have done well, you tried to fuse a washer.
@MisterdionneYT4 ай бұрын
didnt have a plug haha easy way but dirty way my guy ! anyway a lawn mower engine is basicaly free like 20$ 40$ so i dont really care haha it worked so thats what matters haha
@sqeekykleen493 ай бұрын
This dude watched a lot of schoobie doo... 😮
@Settinghooks_fishing3 ай бұрын
Bros the god of lawnmowers
@YonyLeclair74 ай бұрын
Bro is a paid actor 3:18
@MisterdionneYT4 ай бұрын
he doesnt like cameras idk why 😂
@spudstudios33424 ай бұрын
Not supprised it runs that good, the balance shaft 100% is working as the oil slinger. And due to it being a horizontal shaft, you can use a regular go cart clutch and a chain, and no belt slip, with a tiny back sprocket. Then it will be a beast!
@MisterdionneYT4 ай бұрын
the question is do they all have a balance shaft
@spudstudios33424 ай бұрын
@@MisterdionneYT no, I think only some single cylinders have them.
@MisterdionneYT4 ай бұрын
@@spudstudios3342 then its only possible with the ultra balanced engines since they have a balancer lol
@spudstudios33424 ай бұрын
@MisterdionneYT take a rod bolt out and put a dipper on it, and re tourqe it to spec. I saw someone do that to a push mower engine and it actually worked
@DresdonAcacinTheOriginal3 ай бұрын
Mister Dion that crank case is made of cast aluminum how did you weld a steel washer to it?
@MisterdionneYT2 ай бұрын
i dont know it worked hahaha
@chrisjayr4 ай бұрын
Why does he sound like a really young version of Project Farm? Love the video tho
@renarsosmis38194 ай бұрын
I hope the Next bild is going to be a 4x4 lawnmower 2 axels one in the back and one in the front I hope you can make one 😅
@MisterdionneYT4 ай бұрын
its in my project list !
@lvemaster11343 күн бұрын
Where is the video where you build that four wheeler frame onto that?
@yourlocalrussiankid91624 ай бұрын
funny how, that when me and my freind tried doing that, our engine just said fuck you and lost compression
@nedlyest3 ай бұрын
There is probably to much oil. There is supposed to be a thing attached to the crank that flicks the oil up.
@yourlocalrussiankid91623 ай бұрын
@@nedlyest so thats why it lost compression?
@nedlyest3 ай бұрын
@@yourlocalrussiankid9162 if it's to full it's going to bypass the piston rings, and fill the cylinder and burn oil. If it gets gummy enough it will make the rings stick and make bad compression. You can tear it apart and clean the rings and probably will run again
@yourlocalrussiankid91623 ай бұрын
@@nedlyest ohhhh gotcha man
@FeetusMcCarland4 ай бұрын
I tried this before with a vertical 12hp briggs flathead. It worked but it would spray all of its oil out of the breather tube.
@Trenboloneenjoyer3322 ай бұрын
bro im planning on putting 28mm carb on my 2002 briggs and stratton engine and making it horizontal and i finnaly i found someone as autistic and not afraid of speed as me
@96fix-it-frank4 ай бұрын
I'm going to go ahead and comment before I finish watching I'm going to guess that the only way for it probably function is if you change the way the oil is being flung around inside the crankcase and the carburetor has to be the right way to
@My_Gaming_Mind4 ай бұрын
that's really helpful, but now i wanna see if a engine intended to be mounted horizontally(of a bike) mounted vertically, i need that information for my project and i don't have the budget to risk ruining an engine for science
@jaredlancaster41374 ай бұрын
why on earth do you need to run a horizontal shaft engine vertically? Just get a vertical shaft engine, good old briggs and stratton vertical shaft engines are on every $14 crappy lawnmower
@My_Gaming_Mind4 ай бұрын
@@jaredlancaster4137 correct me if I'm wrong but I think that company only sales in north America
@jaredlancaster41374 ай бұрын
@@My_Gaming_Mind oh, you're not from around here. Yeah probably, but the brand doesn't matter. My point was that old lawnmowers are cheap and plentiful, and so it's not hard to find a vertical shaft engine.
@My_Gaming_Mind4 ай бұрын
@@jaredlancaster4137 It's hard to see one let alone getting an old one lol, but motorcycle engines are cheap and easy to find
@Kev-N420004 ай бұрын
I did that years ago to a 3.5briggs , it seized because I didn’t put a dipper on the conrod to splash the oil around lol
@MisterdionneYT4 ай бұрын
but it also didnt put a oil dipper ??
@Fiat20vt4 ай бұрын
Nice video gd work
@jasonz77884 ай бұрын
Hahaha thanks
@LTLX70004 ай бұрын
The downsyndrome makes the video a lot more enjoyable 🤗
@MisterdionneYT4 ай бұрын
wtf hahahaha !
@CenReaper.4 ай бұрын
Want something fast with a little power? Put a weed Wacker engine in a velomobile if you can find one at low cost.
@cliftonmassey31434 ай бұрын
Be careful with the transmission. I've seen them break when more powerful engines have been added.
@ichbineinebiene62344 ай бұрын
🤣🤣 peerless 2300 , one though axle
@MisterdionneYT4 ай бұрын
i dont think this axle will break haha
@djSpinege4 ай бұрын
I wanted to watch this so bad but cant stand the camera work so I'm out. It's good, just not for me lol
@MisterdionneYT4 ай бұрын
the camera work ? wdym
@herlemaggard693 ай бұрын
@MisterdionneYT probably referring to the spazzin around
@dabdestroyer73272 ай бұрын
@@MisterdionneYTcant satisfy everyone i guess 🤷♂️ i think the camera work is gr8 m8 👍
@CrazyRider8644 ай бұрын
@mistordionneYT, I built a throttle pedal on my mower, I made sure everything was connected, and when I turn it on and put it in drive, it still just goes full speed and the throttle does nothing. How do I fix it?
@98chevys10ls4 ай бұрын
do you have the governer still installed? is it put together properly if so? if its removed you might not have enough slack in your pedal causing it to lock the throttle wide open
@MisterdionneYT4 ай бұрын
the governor is completely removed
@Voo_Doo_Blue3 ай бұрын
Throttle return spring? (Or lack thereof.)
@leostgeorge20803 ай бұрын
Yo Genius. If you install an oil slinger from a horizontal shaft engine, you'll be fine. If not best of luck! Oh the oil slinger is mounted on the cap of the connecting rod. Just thought i'd mention since you seem to be an expert. LOL Best of luck in all your endeavors. I mean that!
@MisterdionneYT3 ай бұрын
i am not an expert ! lmao
@leostgeorge20803 ай бұрын
@@MisterdionneYT Only way to become one is by doing. You're heading in the right direction. Every mistake is a learning experience just a success is.
@MisterdionneYT3 ай бұрын
@@leostgeorge2080 yes my friend
@Voo_Doo_Blue3 ай бұрын
@MisterdionneYT you know the definition of an expert? An Ex is a has-been, a Spurt is just a drip under pressure. Never claim to be an expert, always claim you're learning with every job. My dad told me that 50 years ago & I never forgot it.
@leostgeorge20803 ай бұрын
@@Voo_Doo_Blue So you're a drip under pressure? I can believe that. Maybe the voodoo got you? Strange people in this screwed up world. (you being one)
@Jaybird9133 ай бұрын
Qwhy didint you try to find one of those v twin mower engines that would have been really cool
@sooonaekoo1-52 ай бұрын
Someone forgot to take their ADHD pills and I'm not complaining
@simonallan99414 ай бұрын
Easy if you use a Suzuki M120x 2stroke lawnmower engine 😂 like I put on my bicycle, 85kph no worries
@AlienLivesMatter3 ай бұрын
Need a half track
@InfamousAMH2 күн бұрын
Do you have an update on it?
@willtay30163 ай бұрын
Did you use gasket maker as a head gasket lol?
@MisterdionneYT3 ай бұрын
nope haha
@That1StonedBlader4 ай бұрын
As someone who has a tecumseh engine mower that doesnt work, and lives in a town that rivals tecumseh (they made us shut our hospital down and had one built inbetween our towns) fuck them lol
@christopherlastname76383 ай бұрын
There's no diper on the crankshaft
@MisterdionneYT3 ай бұрын
no ! haha still survived because of the counter balancer !
@quevicular4 ай бұрын
Cast eyeron is not necessarily pleasant to weld that is for sure
@MisterdionneYT4 ай бұрын
its basically impossible to weld ! what a pain
@quevicular4 ай бұрын
@@MisterdionneYT what being cool is that you did the conversion from the vertical shaft to horizontal. Never seen that done before without having to buy the proper bottom crankcase plate and without a dipper. Wonder if you could put a camera inside the engine and see what The oiling it is doing. I know it's a far stretch. But never seen it done.
@MisterdionneYT4 ай бұрын
@@quevicular oil would splash on the camera and i dont think we could see anything unfortunatly 😂
@quevicular4 ай бұрын
@@MisterdionneYT yeah I know right? Failed attempt but at least if it's splashing it's splashing and it's doing something in there that's working for sure. The oil is head butting all the engine parts in the crankcase, then it is all good. I think your dog would agree.
@MisterdionneYT4 ай бұрын
@@quevicular haha yes he did haha
@aidenbrock5554 ай бұрын
What tires does jimmy have on his mower and what size
@MisterdionneYT4 ай бұрын
4snows and they are 22's
@HenryHoffer4 ай бұрын
yayyy more terrible welding!
@divine81194 ай бұрын
your transaxle is peerless 633
@specialedjoe4 ай бұрын
Yo Tecumseh some of the most reliable engines don't where you herd that?
@divine81194 ай бұрын
i fond an 820 at the junkyard man what a find
@MisterdionneYT4 ай бұрын
what is a 820 ?
@divine81194 ай бұрын
@@MisterdionneYT peerless 820 is like the one in your red 80 kmh mower but with 1 inch axles very heavy duty
@MisterdionneYT4 ай бұрын
@@divine8119ohhh ok
@Slave_owner12344 ай бұрын
3:41
@quevicular4 ай бұрын
Mint!
@Name-gy6xq4 ай бұрын
the craftsman is it a hydrostatic?
@MisterdionneYT4 ай бұрын
the one i was using no
@Willis_1-4 ай бұрын
I believe they where talking about Jimmy’s mower
@MisterdionneYT4 ай бұрын
@@Willis_1- ohh my bad !! jimmy's mower is a pearless 6 gears !
@minecraftnoob42734 ай бұрын
Wrong RTV
@Blood_kingla4 ай бұрын
If not why not put 4wd
@MisterdionneYT4 ай бұрын
ohhh great idea
@ololo47424 ай бұрын
how many hp is your engine?
@MisterdionneYT4 ай бұрын
all of it ! haha 12hp
@HunterWolf-q3t3 ай бұрын
Does Jimmy have a KZbin channel
@MisterdionneYT3 ай бұрын
@@HunterWolf-q3t no but i am trying to get him to create one !
@Modified_discover_4 ай бұрын
Hello bro
@frankroll80804 ай бұрын
At 103. You can see that this engine has a oil pump. All you had to do is add a tube to the bottom to the sump. And with the gear on the governor also acts like a oil Salinger as in a opposed twin B&G .not to mention the balance shaft was was doing the same thing also . kids look shit up before you try something you might just learn how to do things the right way. Then your learning skills instead of making stupid videos.
@AustinRBa4 ай бұрын
Where are you seeing an oil pump at 103?
@MisterdionneYT4 ай бұрын
its not even a oil pump its an oil squirter !
@charlesangell_bulmtl2 ай бұрын
YT will pay you too, to act the fool...
@tariqelageli65524 ай бұрын
Hé man tu devrais parler plus français dans tes vidéos comme "easter egg", nous les bilingues on se marre!
@Blood_kingla4 ай бұрын
Is the lawn mower 4wd
@MisterdionneYT4 ай бұрын
no its not haha
@Timrsnakess4 ай бұрын
Thats funny I am using the 12hp ohv tecumseh on my atv front suspension mower just still running transaxle setup, one thing I would worry about is getting oil to the rocker arms on the top of the engine then getting into some rpms
@MisterdionneYT4 ай бұрын
i forgot to show that there was plently of oil going up to the rocker arms valve springs !!!
@mihaicostea43973 ай бұрын
half the video was just how to baisic
@MisterdionneYT3 ай бұрын
hahaha ! i totally forgot that guy haha ! what a waist of food thooo hahaha
@lightoff1284 ай бұрын
Do you speak Russian? I heard "Thank you" (in Russian) at 0:17
@MisterdionneYT4 ай бұрын
whattt 😂 nah i just make wierd noises haha wtf 😂
@ungarsdanslegarage86594 ай бұрын
Venez vous de victo?
@truthslayerone2644 ай бұрын
I did it as a kid on a bike, it was easy because it was a 2 stroke.
@Voo_Doo_Blue3 ай бұрын
How does comparing a 2 stroke to a 4 stroke add ANYTHING to this discussion?!? Apples and oranges, my friend, apples and oranges.
@shawnricher23854 ай бұрын
Je penssai pas tu ettai queb t de quelle coin 😂😂😂😂😂😂