Tap to unmute

Blending Vocals with a 2-TRACK Instrumental

  Рет қаралды 52,952

Mix With Jerry

Mix With Jerry

Күн бұрын

Пікірлер: 103
@SinikillOfficial
@SinikillOfficial Жыл бұрын
Wow man after 13 years of watching mixing and mastering tutorials on YT, this is the best by far! I appreciate your thoroughness, most don’t go into detail the way you do ✌️
@designerspiff4026
@designerspiff4026 Жыл бұрын
HelpmeDevvon is Awesome too 🔥
@TOPSyndicate
@TOPSyndicate 9 ай бұрын
Yo that's crazy it marks 13 for me to 😂
@Jy1414
@Jy1414 Жыл бұрын
your explanation rhetoric is exceptional thank you
@terrymcginnis7011
@terrymcginnis7011 Жыл бұрын
Jerry, you are literally the best mixing KZbinr out. Please don’t stop posting, your tutorials are so easy to understand. You’ve help me grow a lot in the last few days with these videos. Thank you for everything 🙏🏾.
@mixwithjerry
@mixwithjerry Жыл бұрын
Thank you!! It means a lot 🙏🏼
@stingylizard
@stingylizard Жыл бұрын
Yes! In Studio One,each channel has a gain control,which saves using a plugin but this is how we did it for years. Solid video,Cheers
@PapaDuck
@PapaDuck 11 ай бұрын
great video
@diavallestrange6818
@diavallestrange6818 11 ай бұрын
You're a monster explaining, thank for all the knowledge and time, big appreciation 🙏🏻
@aishine8184
@aishine8184 Жыл бұрын
You definitely got a new subscriber based off this video your explanation is clear and simple
@eugeniamikulan3328
@eugeniamikulan3328 8 ай бұрын
yup, and you convinced me to subscribe too. He's really good
@elsenior1597
@elsenior1597 Жыл бұрын
I personally thank you brother. Your tips and videos are on point and very very useful. I’m new to the channel and I want to tell you keep going my man. You have talent and charisma both music and teaching. Even if i’m not new in the mixing game in a few days watching these videos I refresh some things ✌🏼
@deerorigues3010
@deerorigues3010 Жыл бұрын
Facts jerry and a couple more engineers taught me more than any engineering school probably would
@randypulley8783
@randypulley8783 29 күн бұрын
Great process and explanation. Thanks.
@in70x
@in70x Жыл бұрын
I also usually add dynamics in as well. I gain reduce, use a Transient Shaper like Smack attack, then maybe the Center Plug-in to make sure my kicks and low end is mono and in the center., I scoop a tiny bit with EQ and a little side chain… Then you gotta blend in your vocal trying to match the compression and adding delay and reverb to glue it all together r
@marcinneumann4114
@marcinneumann4114 5 ай бұрын
Nobody asked
@izzyizzm8761
@izzyizzm8761 Жыл бұрын
When you said Voltage, I subscribed!
@BHNDRXX17
@BHNDRXX17 6 ай бұрын
May God bless this man 🙏🏽🙏🏽🙏🏽
@dawutelevision
@dawutelevision Жыл бұрын
This was great thank you and happy new years
@RealNuruMusic
@RealNuruMusic 3 ай бұрын
Would it be better to use something with more control without the plugin? Such as the q3 by fabfilter? Then you can adjust the q so you’re not carving out so much and I feel the mix would nestle into the mix better
@cd123atd4e
@cd123atd4e 2 ай бұрын
Why cant i use scarlett red compresor and scarlett red eq to fine tune the 2 track. The compressor is ur limiter and that specific eq is great for fine tuning
@natalieres3698
@natalieres3698 8 ай бұрын
When using the R6 to cut that range on the beat, try checking the mid setting instead of leaving it on stereo
@slumpedfocused8377
@slumpedfocused8377 Жыл бұрын
I don’t have a stereo aux in button could anyone point me in the right direction thank you in advance
@Uggo_lee
@Uggo_lee Ай бұрын
Greate video ❤, I always learn when I watch your videos..... Question: please it this possible with Fabfilter proQ3?, any thoughts?
@eugeniamikulan3328
@eugeniamikulan3328 8 ай бұрын
Thank you so much! This helped a ton.
@KingTrayTovine
@KingTrayTovine Жыл бұрын
SSL G Channel 6 to 7 Desb Turn it Down Wide curv to scoop out Less is more Eq on dynamic frequency
@jweezy1414able
@jweezy1414able Жыл бұрын
Pure gold
@213hudson
@213hudson 4 ай бұрын
At what level should the vocals be if the 2 track is lowered to -9dbs?
@WestCraven
@WestCraven 4 ай бұрын
😮
@tecno8335
@tecno8335 19 күн бұрын
Use your ears my friend...train them
@SugaKat
@SugaKat 8 ай бұрын
i cant find one video on how to set up an apollo with a uad preamp and what levels the mic and preamp should be at
@isaiahruiz4566
@isaiahruiz4566 Жыл бұрын
Bro you underrated thank you bro
@mixwithjerry
@mixwithjerry Жыл бұрын
Glad I could help 👍🏼 thanks for the feedback!!
@MasonTorrey
@MasonTorrey Жыл бұрын
Why would you use a plugin to lower the gain when you could have just done it in the DAW's mixer?
@lililWAVEZlilil
@lililWAVEZlilil Жыл бұрын
He's adjusting the input volume of the mixer, since it goes: input volume -> fx chain (example: EQ/Trackspacer) -> output volume. The plugins would think the instrumental is louder due to the input volume, so it would process as such. Ducking/scooping more frequencies and harder, then you'd turn down the volume which would make it quieter and like shit lol
@MasonTorrey
@MasonTorrey Жыл бұрын
@@lililWAVEZlilil Thanks! :)
@lililWAVEZlilil
@lililWAVEZlilil Жыл бұрын
@@MasonTorrey no problem :p
@1bunedung-b3s
@1bunedung-b3s Жыл бұрын
Ur the best bro learn a lot from u
@mixwithjerry
@mixwithjerry Жыл бұрын
Thanks for the feedback 👍🏼
@fytbvro
@fytbvro 6 ай бұрын
I'm confused... with the dynamic EQ you said to take out a maximum of -3db but you let Trackspacer take out like -10db at least....
@julioortega9996
@julioortega9996 5 ай бұрын
Its both. -6 to -12 on main and -2 to -3 in dyneq
@tecno8335
@tecno8335 19 күн бұрын
​@@julioortega9996it makes no sense. just pick one cause both methods do the same thing
@540Hero
@540Hero Жыл бұрын
How to I side chain the track spacer
@Addghjifeet
@Addghjifeet Жыл бұрын
Thanks this video helped me a lot
@Elipkwy
@Elipkwy Жыл бұрын
Why don’t I have the stereo aux in option. I just just main and output under the processing tab
@mixwithjerry
@mixwithjerry Жыл бұрын
Is the vocal signal sidechained to the instrumental mixer track? At the bottom of the vocal mixer track make sure the sidechain signal is sent to the instrumental.
@str0xy
@str0xy Жыл бұрын
@@mixwithjerry i have the same issue i sidechained it to the beat but i dont havve the option
@Datsmeeeeeee
@Datsmeeeeeee Жыл бұрын
⁠@@str0xyi have same problem too. Maybe the problem is that we have fl studio 20
@ISLANDZBEATS
@ISLANDZBEATS 9 ай бұрын
Hey, I'm still learning to mix vocals I wanted to ask what's the difference in doing this and using patcher /sidechain? Thanks!
@novazack2280
@novazack2280 Жыл бұрын
Love u from italy
@fredrickcaples6112
@fredrickcaples6112 Ай бұрын
Nice video
@pattanrecords
@pattanrecords Жыл бұрын
You the best bro🎉🎉🎉🎉
@brokentwinz91
@brokentwinz91 Жыл бұрын
You also go at it's source to bring down the volume of the beat
@jjgangg
@jjgangg Жыл бұрын
Most needed
@Bahamamos
@Bahamamos 7 ай бұрын
what if vocals is louder than the beat and needs to blend lower? Especially add echo and doubling of voice.
@Dende_xo
@Dende_xo 5 ай бұрын
Turn the Vocal down on Volume or make the beat louder.
@Bahamamos
@Bahamamos 5 ай бұрын
@@Dende_xo That doesn't blend, add doubling of voice or echo in unison..
@1KriticalShoota
@1KriticalShoota Жыл бұрын
I do the same thing but I use the Fabfilter Pro Q3 to do that 😅… great video thanks 🙏🏾
@mixwithjerry
@mixwithjerry Жыл бұрын
Thanks for watching 🙏🏼
@SEPTMBERXXIXX
@SEPTMBERXXIXX Жыл бұрын
I have a question am I supposed to do this before I mix my vocals or after? Also, video was great this helps me a lot
@NarenZac
@NarenZac Жыл бұрын
Hi Jerry, i have a question... If our song have more vocals like featuring artists.. How to sightchain different mixers together with the beat? 🤔
@mixwithjerry
@mixwithjerry Жыл бұрын
You could route all the lead vocals to a bus and title it ALL Lead Vox and then use that for sidechain input to the 2-Track. You could also just have multiple dynamic eq plugins loaded on the 2 track and have each one sidechained to a vocal. The EQ won’t engage unless the vocal that is sidechained to it is active.
@mixwithjerry
@mixwithjerry Жыл бұрын
The knob for the Sidechain signal shouldn't show any signal being sent. If there was actually any signal being sent then you would be doubling that signal the more that you increase that knob.@HoodMelody
@mixwithjerry
@mixwithjerry Жыл бұрын
correct@HoodMelody
@KC10234
@KC10234 8 ай бұрын
I have a question. Should I boost the gain of the beat I created after or before vocals. I have seen tutorials for gain staging but I wasn't sure if I should eq and add reverb to beat before adding a limiter or make a beat record vocals then limit then mix
@Frontier2000AnoDomin
@Frontier2000AnoDomin Жыл бұрын
We also have the habit of using a plugin to control/ride volume, rather than using the DAW mixer. We use Sonalkis FreeG though, as it uses very little CPU, it has a large slider and its free! We have a video on how we use it if anyone wants to see it in action.
@zorsyyth208
@zorsyyth208 7 ай бұрын
why not turn the beat volume down using the faders?
@daillestaround3
@daillestaround3 Ай бұрын
Because it will still peak
@Worthyiii
@Worthyiii 11 ай бұрын
When I right click stereo aux in it don’t show main vocals help pls??
@mixwithjerry
@mixwithjerry 11 ай бұрын
Do you have the output of the main vocals track in the mixer sidechained to the instrumental track?
@EverViettiOfficial
@EverViettiOfficial Жыл бұрын
hello jerry! how are you? You didn't show how to link the channel to the trackspacer, I don't understand how the hell to do it haha
@Leghetti
@Leghetti 4 ай бұрын
Can you use soothe 2 instead of track spacer for this?
@NasaRecordsTheHitFactory
@NasaRecordsTheHitFactory Жыл бұрын
genius
@IshwarSDhanjal
@IshwarSDhanjal 8 ай бұрын
Great video, just a few quick questions, though: Does this help with creating mash-ups and adding vocal stem separation to instrumentals? Do I still need to sidechain the vocals to the instrumental when using Trackspacer? If yes, how do I do that? How do I sidechain effects on the vocals to mix with the instrumental, e.g., delay, reverb, etc.?
@user-qh5uy8xi5m
@user-qh5uy8xi5m Жыл бұрын
Do u adjust the release whit tempo
@luxlife8996
@luxlife8996 Жыл бұрын
Currently working on a project I've got 3 different lead vocals and a channel for adlibs how am I gonna side chain them all to the beat? Any help would be appreciated 🙏😭😭
@mixwithjerry
@mixwithjerry Жыл бұрын
Create a vocal bus with all of the vocals routed to it and then sidechain that to the beat
@lilnosebleed3683
@lilnosebleed3683 9 ай бұрын
@@mixwithjerry when i make a vocal bus and route the vocals to it, the vocals get louder what do i do?
@mixwithjerry
@mixwithjerry 9 ай бұрын
@@lilnosebleed3683 It’s probably because you still have it routed to the master also. If you route the vocal to a vocal bus, you want to un-route it from going to the master channel. It’s essentially doubling up in volume because the vocal is routed to the master and also to the vocal bus which is also going to the master.
@lilnosebleed3683
@lilnosebleed3683 9 ай бұрын
@@mixwithjerry ohhhhhhhh i seee now loll thank u for the answer
@orgilbaatarbaasanjav
@orgilbaatarbaasanjav Жыл бұрын
tnx
@user-qo2wo5ux5s
@user-qo2wo5ux5s Жыл бұрын
Hey I luv the vid but I had a question. You say to turn the beat down with the plugin and then say we can turn it back up later, but wouldn't that just start clipping/peaking? is there a specific way you bring the volume back up? thanks again and have a good one
@mixwithjerry
@mixwithjerry Жыл бұрын
The reason you turn it down is so that when you add in the vocals you’ll know where your track is now peaking at with the vocals added. Then you can bring the volume back up, but have a limiter to make sure you don’t go above 0 dB
@tucups1809
@tucups1809 Жыл бұрын
You can use the clip gain to turn the the volume down of the 2track beat (either on the track itself or a clip gain factory plugin). Don’t just turn the volume down on the volume fader bc the levels will still be clipping and you won’t get your desired result.
@kmzdrg
@kmzdrg 4 ай бұрын
Hi, so the best would be to use the F6 and on top of that the trackspacer? Or just to choose one of the options? Thanks
@mixwithjerry
@mixwithjerry 4 ай бұрын
@@kmzdrg better to just use one or the other
@2nvale595
@2nvale595 Жыл бұрын
Would you recommend using trackspacer and waves center together
@InaktiverUser
@InaktiverUser 5 ай бұрын
so you didnt master over a 2track beat with a limiter on the master bus?
@RodrigoMoralesUnderPressure
@RodrigoMoralesUnderPressure 7 ай бұрын
Nice video. Do you use the two plugins at the same time? Or are two tecniques? Sorry for my english
@am-mp5nt
@am-mp5nt Жыл бұрын
so is this to utilize both dynamic eq and trackspacer or only trackspacer ?
@mixwithjerry
@mixwithjerry Жыл бұрын
Only Trackspacer.. it’s just more precise and effective than Dynamic EQ
@am-mp5nt
@am-mp5nt Жыл бұрын
@@mixwithjerry Ah i see thank you for the quick reply! was just confused because i didn’t see the process of the eq removed
@youtune_records_official
@youtune_records_official Жыл бұрын
Hey quick question.. After mixing the vocals with instrumental. do we need to do mastering again? or just push a limiter to get suitable gain?
@mixwithjerry
@mixwithjerry Жыл бұрын
Definitely need a limiter because there will be new peaks created when you combine the instrumental and vocals come together.
@millysmanifestations
@millysmanifestations Жыл бұрын
I’m wondering if you can mix my track and vocals for me? I will pay you !
@Gautam.Bharadwaj
@Gautam.Bharadwaj Жыл бұрын
Thank you for the great info! Wondering what else can be used instead of SSL to bring down the output? Any compressor with output gain is enough? TDR nova I think does dynamic EQ cuts with a side chain enabled. Also wondering if there is any plugin for free similar to track spacer?
@mixwithjerry
@mixwithjerry Жыл бұрын
Any plugin with an output gain control, which most of them have. Just have to make sure no other processing on the plugin is taking place. I haven’t found anything free like Trackspacer yet, but I think I paid around $30 for it so it doesn’t break the bank.
@cakirry
@cakirry 12 күн бұрын
@@mixwithjerry isn't maximus from fl studio okay with decreasing the output gain?
@cakirry
@cakirry 12 күн бұрын
and while you are decreasing the output in the video, input gain seems to be chosen in plugin so I am confused :D
@JC-jt3ug
@JC-jt3ug Жыл бұрын
Man i dont understand anything on FL like this channel stuff just doesnt work for me i try link one to the beat then i click on the beat to do the eq and it unlinks
@creepyenid6001
@creepyenid6001 4 ай бұрын
bro used a 140 bucks plugin just 2 turn down the gain of the beat 😭😭
The TRUTH about MIXING your OWN music
3:44
Mix With Jerry
Рет қаралды 15 М.
Mixing Vocals To A 2 Track Beat
11:56
Help Me Devvon
Рет қаралды 102 М.
Hilarious FAKE TONGUE Prank by WEDNESDAY😏🖤
0:39
La La Life Shorts
Рет қаралды 44 МЛН
Every team from the Bracket Buster! Who ya got? 😏
0:53
FailArmy Shorts
Рет қаралды 13 МЛН
«Жат бауыр» телехикаясы І 26-бөлім
52:18
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 434 М.
The SECRETS to a BALANCED Mix
10:48
Mix With Jerry
Рет қаралды 87 М.
I Will Never Mix on Headphones Without THIS, and it's FREE
9:24
Chris Selim - Mixdown Online
Рет қаралды 129 М.
HOW TO MIX A 2 TRACK BEAT | with ASHER
9:59
Castle Row Studios
Рет қаралды 16 М.
3 plugins for mixing vocals to a 2-track instrumental 😤
12:13
@mixwithjacob
Рет қаралды 13 М.
These Will Transform Your Mix... (Thank Me Later!)
8:07
Streaky
Рет қаралды 109 М.
Multiband Vocal Magic
14:50
Colt Capperrune
Рет қаралды 122 М.
Preparing Your 2 Track Beat To Record On
14:03
Help Me Devvon
Рет қаралды 35 М.
Using Multiple Compressors When Mixing Vocals
8:27
Mix With Jerry
Рет қаралды 66 М.
How to Mix Vocals to a 2 Track! (Pro Secrets Revealed)
11:53
MyAudioAcademy
Рет қаралды 22 М.