MJJC Foam Cannon Pro V1 vs V2 - Is the new one better?

[@PanTheOrganizer]

🔥 For quality detailing products visit: bit.ly/3BiPe3o ⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: MTM PF22.2: bit.ly/3ppTFPI MJJC Foam Cannon Pro v2: amzn.to/47sSzak TriNova foam cannon: amzn.to/3CdeOE9 Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YkTEwZ Chemical Guys Big Mouth Max Release Foam Cannon: amzn.to/3YoCIpF Adam’s Mega Foam: amzn.to/3fWtHAg Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/3vj0Zzz Mosmatic gun and wand solution: bit.ly/3aA67oE Other good pressure washers: bit.ly/3M8J32M Phoenix EOD Apex Auto Wash shampoo: amzn.to/43OGTNA CR Spotless water deionizer system: bit.ly/3AMsMKf 🇨🇦 For people in Canada: MJJC Foam Cannon Pro v2: bit.ly/3ltOq3r TriNova foam cannon: amzn.to/3KxSJF2 Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/2W4vqMA MTM PF22.2: bit.ly/3pqcQsR Kranzle 1122TST pressure washer: bit.ly/3MgYINZ Mosmatic gun & wand solution: bit.ly/3EBUZbI Other good pressure washers: amzn.to/3ZIXtw6 Phoenix EOD Apex Auto Wash shampoo: bit.ly/3HXst6p CR Spotless water deionizer system: bit.ly/3iRQ8bd 🇬🇧 For people in the UK: MJJC Foam Cannon Pro v2: bit.ly/3A7BFzv MJJC Foam Cannon on Amazon UK: amzn.to/3Gj641H MTM PF22.2: bit.ly/3AB0Bkh Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3cpoleD Phoenix EOD Apex Auto Wash shampoo: bit.ly/3nCV2O6 🇫🇷 For people in France: c3po.link/Qu6FkUYM22 ✅ Foam Cannon Battle video: kzbin.info/www/bejne/rXeYoXeGepypqJI ✅ How to use a foam cannon + TriNova review: kzbin.info/www/bejne/h6CViISGh6tgjdU ✅ Foam cannon (pressure washer) VS foam gun (garden hose): kzbin.info/www/bejne/qHuznGukh518mJI

[@michelnantel3439]

Bonjour je me demandais a quand en français? Merci

[@PanTheOrganizer]

Il m'est rendu impossible de produire des versions bilingues pour chaque vidéo malheureusement. Une seule vidéo peut prendre 10 à 15 heures à produire, alors tout recommencer en double à chaque fois est impensable. Aussi, 90% de mes auditeurs sont anglophones, donc mettre 100% d'efforts et d'énergie pour 10% des résultats en français n'est pas viable. Il faut garder en tête que je ne suis pas le seul KZbinur à parler plus d'une langue, et pourtant, je suis le seul à produire des vidéos bilingues. Ça démontre à quel point ce n'est pas aussi facile qu'on pense produire des vidéos KZbin. C'est la chose la plus difficile que j'ai faite dans ma vie bâtir cette chaîne. Un effort surhumain de plus de 7 ans pour se rendre à ce point. Je n'ai jamais manqué une seule semaine d'afficher des vidéos depuis la création de ma chaîne. Ceci étant dit, je continuerai à produire des vidéos françaises lorsque possible. Merci de ta compréhension.

[@JustProAutoDetailingInc]

Hi Pan. I’m the retired CPD officer you met at the Bays in Romeoville. Nice demo. I went down the same rabbit hole as most detailers seeking the greatest foam. One of my oldest cannons finally bit the dust and I have the excuse I need to buy the new model. Thanks!

[@PanTheOrganizer]

I absolutely remember you Keith! I hope you're having a great day.

[@alanhefter4659]

I have version 1. Works great. I agree the new version lays it down thicker but not enough of a difference for me to buy the new version.

[@feeldafury]

I just started detailing my own car 2 months ago. I got the triniva foam cannon, it was very runny. I picked up MJJC 2.0 a month ago. It was night and day comparison. I returned the Trinova back to Amazon. I love the video you put out, Pan. Thank you for all the tips and demo you do.

[@PanTheOrganizer]

Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@randybecker7339]

This is a very impressive improvement! My first thought was the rear of the car might have had some more road film due to being the rear of the car but the hood demo dispelled that right away. They may have overstated some of the benefits of the newer model but they sure made some significant improvement in sheer volume and richness of foam!

[@ralphyibanez]

Hi Pan! Thanks for all your videos. I'm a mobile detailer and learned a lot from your vids. I recently bought the MJJC Pro 2 and it's amazing. Absolutely no need to look any further as this will be my go to foam cannon. Keep up the good work!

[@PanTheOrganizer]

Thanks Ralph! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@ralphyibanez]

@@PanTheOrganizer About a year ago i wanted to start a business here in The Netherlands. I found a random video about car detailing and just by searching for advise about products, tools and equipment I found your chanel. The detailed information was, and still is, very helpfull.

[@PanTheOrganizer]

😁👍🏻

[@stephendockeney]

I'm still rocking the Griot's and after a year of weekly to bi-weekly washes it is still going strong! Love it!

[@PanTheOrganizer]

👍🏻

[@keagandevilliers2832]

just bought v2 to upgrade from an old no name cannon. thanks to your videos. can’t wait for a break in the rain to try it tomorrow

[@PanTheOrganizer]

Thanks Keagan!

[@cgraham6]

My first cannon was the Griot's brilliant finish based on the last comparison video, but it never worked right, even right out of the box. All it would ever produce was soapy soup. I probably should have sent it back, but I replaced it with the MJJC v2, based on JoshV's claim that it was the best foam cannon he had ever used. It didn't disappoint. Good to see that it's a definite improvement over the v1 unit.

[@MatthewSmith-ly8lp]

I bought V2 based on a previous review you had done. I love this product. It works great. Thanks! My mustang PP2 loves this

[@PanTheOrganizer]

Thanks for sharing your personal experience with it Matthew! What is your go-to snow foam?

[@404notfound.....]

Definitely more foam on version 2! These are definitely good units. Great video pan!! 👍🇨🇦

[@PanTheOrganizer]

Thanks!

[@zachmulharan9507]

I bought a V2 a few months ago and it works like a champ. I highly recommend it.

[@PanTheOrganizer]

Thanks for sharing your experience Zach.

[@ZeeshanKhan-tj2wh]

I was looking forward to buying the MJJC foam cannon and was thinking about either V1 or V2 and was pretty confused but then I said to myself that Mr. Pan would definitely have a video on this topic and I wasn't disappointed. Now I've made my decision for going with the V2 and I will also share my experience as I have a low bar pressure washer and have struggled with the quick connectors for it because these parts are hard to come by in Pakistan. Again, awesome video. Much love to you Sir and you have educated me alot. Thank you.

[@PanTheOrganizer]

Thanks Zeeshan!

[@dannydaugherty5702]

I’m actually in the market for a new foam cannon so this video hits right at a good time! I have seen the first version on some other detailing videos AndRem Details used one ☝️ and get great results with his. So informative my friend 👏I always look forward to any of your new uploads. Thanks for testing these products out for us to watch!👍

[@PanTheOrganizer]

My pleasure! And thanks for your continued support Danny.

[@dannydaugherty5702]

@@PanTheOrganizer Hey I’m your number one ☝️ fan ☝️😂

[@PanTheOrganizer]

Let's go!

[@vannitagliavento]

At which dial setting do you keep your mjjc cannons? all to the + or to the -? I'll go to calculate PIR for BH Auto foam (and I also use GSF) so I want to set it the best before calculating the output! Thanks!

[@PanTheOrganizer]

I always set all my foam cannons for max foam output. Dial to the max on the side that gives the most foam.

[@vannitagliavento]

@@PanTheOrganizer ok thanks Pan, so I guess it is fully clockwise (+) on the MJJC!

[@OCDaddyZsolt]

Hi Pan, the claims on the box are compared to the standard Foam Cannon S (not the S v3.0) and the standard Foam Cannon Classic. If you have the box of the Pro v1.0 yet, you’ll see the same claims. So the claims on the box of Pro v2.0 are the same as on the Pro v1.0. In the meantime, they’ve released an S v3.0 (not Pro v3.0), which costs the same and performs the same, but have a few differences (colour, the bottle etc.). Tested those compared to each other, in case you are interested. One more thing about the latest Pro v2.0 (which technically should be v2.1, as they’ve made changes to the original v2.0 also): They don’t include the metal mesh anymore, as according to MJJC, you don’t need the spare anymore, just need to run clean water through, when you finished using it. The Foam Cannon Pro is my absolute favourite for some time :) Thanks for the review ;)

[@PanTheOrganizer]

Thanks for sharing this info!

[@KonstaNykanen]

I was actually surprised how much thicker the foam was on the version 2😯. If I was on the market for a higher end foam cannon, the MJJC V2 would definitely be on my list of potential foam cannons to buy👍🏻. Great video Pan!

[@PanTheOrganizer]

What's your current foam cannon?

[@KonstaNykanen]

@@PanTheOrganizer My current foam cannon is by Autoglym, a british manufacturer, I bet you've heard of them. They also make other detailing products, waxes, sealants, the whole nine yards.

[@PanTheOrganizer]

Yes they are popular in the UK.

[@georgep.9498]

Yasoo Pan!! I had bought the Griot’s foam cannon after seeing your review on it. I am extremely satisfied with it but the only issue I had was with the weighted ball. It started rusting after the third or fourth month of use but still makes great foam.

[@PanTheOrganizer]

What snow foam were you using in there?

[@yvesst-jacques3989]

I have the V2 and love it, lots of creamy foam, truly love it 😉👍 if one day I have to change it, I'll probably go with V3 or what's version they're up to, love the big opening to put soap in it, MJJC all the way 😀

[@PanTheOrganizer]

Thanks for sharing your experience Yves!

[@dandezz]

Un autre banger Panner.. Lately, I've been turning my dial to a runnier setting for the first time around the vehicle, let dwell 1-2 min, then turn the dial to a "shaving cream" setting and foam it thick before washing and voilà ,all clean..

[@PanTheOrganizer]

👍🏻

[@stephenjames6534]

I have the version 2 and find it brilliant. Only issue is i had a pin sized hole in the brass but soon fixed with a blob of hot glue. Great video pan, greetings from the uk.

[@volvo09]

That pin sized hole is to allow air in as the container empties, so that it doesn't create a vacuum. Edit: Oh you said in the brass, I was thinking of my foam cannon with a brass base. This one has a plastic base. Weird

[@stephenjames6534]

@@volvo09 yeah, it suddenly appeared and was spraying a fine mist of water all over my face when I used it. The glue worked a treat 😁

[@volvo09]

@@stephenjames6534 hahaha! That would be annoying!

[@PanTheOrganizer]

Thanks for sharing

[@lisakaye75]

I have the MJJC version 1. Very happy with it. I also have the one made in Italy. I love them both. I may give my brother in law MJJC version 1 and buy version 2 for myself. He doesn't have a foam canon so I know he would appreciate it.

[@PanTheOrganizer]

Right on

[@DSJ714]

both produced amazing foam to get the final results of nice clean paint

[@PanTheOrganizer]

Thanks for watching David!

[@allforluxury.details]

When I just got the V1 just yesterday 😢

[@martincorriveau]

You are fine with V1, you will still get the same result in hte end. The car will be clean.

[@PanTheOrganizer]

No worries, you got a food foam cannon.

[@chrisshipe8790]

I bought mine 2 months aga😅

[@PanTheOrganizer]

If you bought it two months ago, shouldn't you have the new version? The 2.0 was released last year.

[@ocddetailer]

Always happens! 🙄 it’s a really good cannon I just hate how much it leaks

[@davestewart9146]

I have the MJJC V2, awesome foam cannon, I had lost one of the little red plugs in the lid while cleaning it, I’m not sure what they do but I just ordered more from MJJC, after they arrived my son looked down on the garage floor and found it lol, I don’t remember but the unit may come with extra red plugs, oh well I have extra lol, great comparison Pan, thank you 😁👍

[@PanTheOrganizer]

Thanks Dave!

[@robertrobertson5120]

Thanks for the comparison pan... good visual demonstration!

[@PanTheOrganizer]

Thanks Robert!

[@frankb7449]

Is thicker foam necessarily better? I sort of like how version 1 is a little runnier since I usually do a foam pre-wash before rinsing and doing a contact wash. Does the runnier foam drip more grime off the paint than the thicker foam which just sits there???

[@PanTheOrganizer]

Some people like runnier foams, some like thicker foams. Up to you to see what you prefer, according to which snow foam you are using.

[@stewartherbert6847]

Hi pan just a short note I have done a couple replays from when you sent one to me all the best Stewart wrote a few things down that I didn't want anyone else to see 👍

[@michaelm1739]

Pan I am still surprised that MTM has not gone to a wider opening on the bottle. Again an informative video Thank you

[@PanTheOrganizer]

I am still waiting for them to produce a wider moth version too.

[@coreymerritt7742]

Thanks pan I recently purchased the mjjc ver2 from Carrzilla a month ago on sale will be using on the truck and trailer this weekend great video 👍

[@PanTheOrganizer]

👍🏻

[@richardseem7948]

Still love my tri nova. Totally agree with ur choices and comments on mtm.actually got my mtm with their stubby 4 100 bucks during last holiday season was a steal and bought it

[@PanTheOrganizer]

Yes that's a great foam cannon too.

[@kenh733]

I was going to order the Mjjc but was going to take a month to get it so I got the Groits Boss and it works great, I did put in the smaller oriface that comes with it because I have a small 2300 psi electric pressure washer

[@LoudModeOn]

The best just got better. Have both, always loved the V1 but the V2 is awesome. Used the MTM for a while, the small mouth was annoying, the metal top on the plastic bottle would constantly overscrew, and the foam quality was less consistent than the MJJC which gives thick, rich foam every single time. MJJC all the way for me! Apparently the new V3 S model has a quick release cap and the same workings as the Pro V2. Might be worth checking that one out if you haven't yet Pan.

[@PanTheOrganizer]

Thanks for sharing

[@pasqualepisani]

I have version 2 and I swapped into the smaller orifice. It works great and I’ve never tripped my 15 amp breaker

[@danidetailbn]

What a difference. But they both do look good. Nice one Pan!

[@PanTheOrganizer]

Thank you! Cheers!

[@amoni1959]

Never tried V1 or V2 but I picked up the V3. It’s freaking sweet.

[@bartjeuhh790]

There's no Pro V3 out yet, you're referring to the S series which is incomparable.

[@richardseem7948]

Another awesome product review and comparison video good friend

[@PanTheOrganizer]

Thank you! Cheers!

[@neilwalker5041]

This is a fun video as everyone loves foam. V1 puts out the foam I prefer but V2 should be able to match the consistency of V1. The open mouth and ball at the end of the straw are nice features. I personally use the MTM and it works well and the parts are easy to replace. The mouth is way to small as I have to use a funnel to poor in the soap. Thank you for a fun video and I hope your avoiding all the smoke. We have some smoke here in Nashville and it does leave my cars a mess.

[@PanTheOrganizer]

Fires are raging in many forests in North America. :( Yeah I love my MTM too. I wish they’d come out with a new version with a wider mouth.

[@Djscanzi]

if the foam is runnier on 1.0, wouldnt it be removing more stuff from the bodywork since it well... is runnier ? the v2 kinda just sticks.... hmmm...

[@billarmstrong7910]

Got MJJC Pro 2 and teally love it

[@PanTheOrganizer]

Cool!

[@AVSVALETINGDETAILING]

Have them all including Mtm. My opinion the Mjjc v3 is the winner. Thick foam. Did I say thick foam I mean it’s unbelievable compared to Mtm. The quarter turn neck is an absolute magical to use. and clear bottle, great to see clearly and no discolouration on the clear bottle, even high alkaline stored hasn’t discoloured or staind it 10/10

[@PanTheOrganizer]

Thanks for sharing your personal experience Aaron!

[@krisnanugraha8493]

Wow , nice video pan, i have v2 , this my favorite foam cannon 😍

[@PanTheOrganizer]

Thanks Krisna!

[@CaptainMike100]

Pan, was there any difference in the quantity left in each cannon after you did the passes on all 3 surfaces ? Did v2 consumed more product ?

[@PanTheOrganizer]

Not really

[@Remsbricks24]

Awesome review pan!!

[@PanTheOrganizer]

Glad you enjoyed it!

[@ashishsharma3301]

Hi sir, after seeing ur videos I have applied turtle ceramic coat 2 coats. What is the time interval if want to apply again can I apply it again after every 3 months. Thanks

[@PanTheOrganizer]

Yes you can apply it in 3 months no problem. You can even apply every month if you really want to.

[@ashishsharma3301]

@@PanTheOrganizer thanks sir

[@UberYou2ber]

Which foam do you prefer on a vinyl matte wrap? Is Chemical Guys Mr. Pink good enough for a maintenance wash?

[@PanTheOrganizer]

Any pH neutral snow foam with no wax in it, and no gloss enhancers, will do. Not sure on the Mr Pink though as their shampoos and snow foams usually have gloss agents. If you want to stay within the CG line, at least use their matte shampoo here: amzn.to/3CkL0Fu But I would recommend something like this: amzn.to/3Ch3O8K Or this: amzn.to/42wN47S See my matte care tutorial: kzbin.info/www/bejne/a4PSlIauf7agsKs

[@TheBreakfastLover]

I strongly recommend a 1.35 orifice to avoid tripping a breaker/blowing a fuse if you only have 15 amps. It still makes tons of foam.

[@bobbyjones2112]

I’ve got version 2.0. I also had the Adams premium foam cannon which I thought was really a good build quality too!😂

[@PanTheOrganizer]

Which is your favorite one?

[@bobbyjones2112]

@@PanTheOrganizer I like the MJJC Pro V2! Adams premium is my second favorite for sure!

[@milanbroceta7485]

I'm using a Karcher K7, so I'm wondering if it's better to use the MJJC 3.0 S with the pre-installed orifice 1.25 or to use the 1.1? It's clear from the video that 1.25 is ok for K7, but I'm not really sure because I wasn't fully satisfied when I used MTM HYDRO SNOW FOAM with 1.25 from a friend. Thanks PAN.

[@PanTheOrganizer]

You'll have to test for yourself and see. Start with the stock one, and if you like the foam output, stay with it.

[@tc9148]

Outstanding review and comparison. The MJJC Pro V2 is so impressive. The link is to a Swift brand foam cannon so is that incorrect?

[@PanTheOrganizer]

It's essentially the same foam cannon (as the MJJC isn't available on Amazon). They did a release a newer one available on Amazon, the MJJC Foam Cannon S v3.0 here: amzn.to/3QBzqOG I reviewed that against the Pro v2 in this video: kzbin.info/www/bejne/gl6WZ2Nugs-eorcsi=t-FoC_4RDouJ6gZw

[@josephdefreitas56]

As usual Pan does an amazing job with the unbiased comparison of the MJJC V2 . Can't believe the ugly steel rims on the car though😀 I do have a question. Wouldn't the V1 with the more runny foam help to dislodge the dirt on the car better than if the foam is "sticking" to the panels?

[@PanTheOrganizer]

Hehe those were just the winter wheels. A popular option in Canada, to avoid damaging the nice summer wheels. As far as the debate of runny vs thick foam, that's up to you to decide. ;)

[@Finitolowpez]

Thank you Pan for your awesome videos. Quick, question, what car shampoo did you use in this video? 1 or 2 oz? Thanks in advance

[@PanTheOrganizer]

Thanks Finito, but I'm a little disappointed in you, as I gave the answers to your questions very clearly in the video... Here: kzbin.info/www/bejne/q6POf5esjdqZgNE You have to watch my videos from beginning to the end. ;) I also placed the links to the all the products including the shampoo, in the description under the video.

[@Finitolowpez]

@Pan The Organizer I really apologize, I stepped out for a minute to check out on my kids. Thanks for the quick reply and your patience. You're the best 👌

[@PanTheOrganizer]

Hehe no worries. Family first! ;) I hope you enjoy my videos. 😁👍🏻

[@vandarkuzhali4580]

Hi pan can you tell me what to look for when buying a vaccum Cleaner for car like specs, features...

[@PanTheOrganizer]

You want something with at least 4HP of power, at least 4 gallons of tank capacity, and a vacuum that can do both wet and dry vacuuming. Here are some recommendations: amzn.to/43T18K4 amzn.to/3qCh2KN amzn.to/45YCE4e

[@vandarkuzhali4580]

@@PanTheOrganizer Thank you so much pan ☺👍. You help me a lot...

[@ShineYourLightDetailing]

Hey Pan, quite impressive improvement! I noticed in the description the hyperlink for Phoenix EOD Apex Auto Wash isn’t there like the other products. Could you add it in? Thanks so much appreciate all you do for everyone’s benefit. 🙌🏼🙌🏼🙌🏼

[@PanTheOrganizer]

I missed that! Hehe thanks for the reminder. I added the link.

[@rbiamby]

Hey Pan, I live in the Mid Atlantic and we have been experiencing the smoke from the wildfires in Canada. What can I use to wash the ash particles off of my vehicles.

[@tennesseefarmboy1536]

Love this foam canon. Wish they would have done something different with the twist knob. Made it click in place when you adjust the amount of foam that comes out.

[@PanTheOrganizer]

Thanks for watching!

[@tmanch1]

Great comparison, I have the v2. Pan, don't know if I missed it, but do you have the foam adjustment on both cannons at the extreme clockwise position? Thx.

[@PanTheOrganizer]

I have them at max foam output, always.

[@PrinceOfDarkness1975]

Hey Pan, what are the differences between using a foam cannon with pressure washer & a pump foamed like a Marolex 3000? Ty.

[@PanTheOrganizer]

The pressure washer and foam cannon setup will always generate the most foam and performance, and speedier application, compared to a regular foaming pump sprayer (that you have to manually pump) or a regular foam gun attached to a garden hose. If you already have a pressure washer, get a foam cannon.

[@coy9898]

Hey great video Pan! Can you recommend some quick connectors in Canada for pressure washers. Or does it matter? Thanks!

[@PanTheOrganizer]

The foam cannon comes shipped with the 1/4 inch quick connector.

[@niacinbiotin]

Hi Pan got a Question: I have a new used matte car and purchased gyeon matte. While decontaminating, prepping the car I noticed low hydrophobic properties on the car. This made me think car is already coated but fading away. Since I cannot polish matte paint for removing existing coating. Can I apple Gyeon matte, directly on this panit? Will it bond? Iron- tar - clay steps are done.

[@PanTheOrganizer]

Hard to say as I don’t know what protection was on there. Do a full wash with a decon shampoo like CarPro Descale to strip older protection, then iron remover, then use a paint prep spray like CarPro Eraser or Gyeon Prep and then apply the matte coating. See my matte paint care tutorial: kzbin.info/www/bejne/a4PSlIauf7agsKs

[@niacinbiotin]

@@PanTheOrganizer Years pass, and you still answer questions. Hope you will grow more. Thanks...

[@PanTheOrganizer]

Thank you! Yeah I can spend up to four hours every single day just replying to KZbin comments. I'm the only big detailing channel that does that. I like being close to my audience and I think that's one of the things that sets me a part from the rest: my accessibility. It does get overwhelming at times, as you can imagine, with almost one million subscribers sending me thousands of messages and emails daily across all platforms, so I can only reply on KZbin, as I would die trying to reply to everyone on every platform hehe. But I'll continue to reply on a daily basis for as long as I can. Have a great weekend!

[@cleancarchris]

Never tried these cannons before..still using my MTM 😃

[@rivakhoffman4825]

Great comparison! I’m purchasing version 2.0. Always OCD about thicker foam. Hey this looks like Andy’s car! Where the heck is Andy today?? 😂

[@PanTheOrganizer]

That's not Andy's vehicle. He drives a Mazda CX-5. The vehicle in the video is my girlfriend's Nissan Rogue.

[@damienwilliams4306]

You convinced me to get 1.0 3 years ago, and I'm convinced I want 2.0 lol

[@PanTheOrganizer]

They are very good foam cannons indeed. But the competition is red hot!!

[@stephanecormier9004]

Vidéo très intéressante encore une fois, merci pour le comparo et tes précieux conseils🙂

[@PanTheOrganizer]

Merci Stéphane!

[@chrisginoc]

Was the MJJC V2 in this video used with the oem orifice or did you add the 1.1 orifice?

[@PanTheOrganizer]

Stock orifice. I never change orifices.

[@chrisginoc]

@@PanTheOrganizer I just ordered my V2 earlier today. I read shipping takes 5-7 business days. I can't wait. I upgraded to the MTM pressure washer gun last week and it's unreal what quality products feel like and how they make your life easier. I'm a weekend warrior who enjoys detailing his stable of cars at home on the weekends. I have my jug of Adams Mega Foam ready to go.

[@PanTheOrganizer]

Good stuff! :)

[@edsexton9836]

Pan, great review and comparison. I purchased the version 2.0, and I'm very pleased with it. Question, do you prefer a wet surface before foaming or dry? It seemed the foam stuck to the surface longer on the dry side. I can only assume that is better. Not a pro here, just an enthusiast.

[@PanTheOrganizer]

It doesn’t really make that big of a difference. See my video on that topic: kzbin.info/www/bejne/Z2e2qHp4hpdsqNU The biggest difference for the pre-wash is what snow foam you pick. See my video: kzbin.info/www/bejne/f2jdaZSgpM-FjKs

[@functionaldoc5054]

Please do a foam show down with MTM and the MJJC Foam Cannon Pro V2.

[@DaOgBro]

So I have the MJJC 2.0, The MTM &, I also have Adams standard foam cannon the first foam cannon that I purchased because I was cheap and I was first starting out. Now I use my MTM’s faithfully and I love it but my MJJC 2.0 needs new filters in less than a year. I know it has a different filter set up. Pan if you’re reading this, maybe you can do a filter change video for others to know because there is a difference. Just saying thank you again love your videos always 👍

[@johngross1952]

The company raised the price by 10-12 US dollars since your videos. I don't know if it's worth it. I love my Griots foam cannon that I got on your recommendation!!

[@perrywysong8825]

Completely off topic but I am opening a shop in hopes of moving away from mobile service. Have you ever used a water containment system?

[@PanTheOrganizer]

I haven't.

[@cranfktubner7677]

Are v1 & v2 brand new? I wonder if there is some kind of maintenance to be done after some time using a foam cannon. Maybe that would explain some differences? Also the type of emulsifier?

[@PanTheOrganizer]

Zero maintenance if you care for them. After using the foam cannons, I always flush them by putting just warm water in the container, and running it through for 30 seconds, to flush any potential soap residue out of the head. Let air dry, and you're done.

[@the_jnlt_channel]

Ive got the Pro V2 but also the S V3.0, which i found the internals to be the same. At least you can see that they did make a change from V1 to V2 👍

[@PanTheOrganizer]

Yeah it seems to me that V2 vs the regular S V3 is mainly about the bottle difference.

[@the_jnlt_channel]

@@PanTheOrganizer yeah definitely looks that way. Not sure why but I keep going back to the Pro V2 tbh.

[@grostoine]

Wich of the 4 you showed (forget mjjc v1) would you put as number one now ? In your last battle it was griots garage the number one but now ?

[@PanTheOrganizer]

The Griot's Garage is the best overall value yes. And would still win a comparison battle as I have to consider criteria that an average user would take into consideration. But my personal preference is still the MTM. If they make a wider mouth version, they'll have a product that nobody else can match.

[@grostoine]

Thanks for your Answer Pan! Keep up the good work !

[@grostoine]

I don't think the PF22.2 is the best tho. There is the griot's boss foam canon that it made off cnc stainless steel compares to cast brass for the MTM. There is also the metering ball in the Griots that gives an edge to the Boss. I have a pf22 and the tip turn too easily. Tried to rebuild it and didn't do Much 😢

[@PanTheOrganizer]

Thanks

[@joweynatividad2347]

Not sure if v1 has it since I don’t have one, but v2 has an inside thread under the cap that can also take standard size bottles like a 16oz bottle. Can you confirm if v1 has it also?

[@kirillkozlovsky3944]

Hey Pan! Thanks for the great video, so appreciate it. In my opinion, its not enough to compare the foams. I think you missed the most important to compare. Which one cleans better??? Thicker foam doesnt mean it cleans better. Please next time take some dirty car and check it by washing after the foam.

[@PanTheOrganizer]

We did not talk about cleaning, as that's not the purpose of the video. What does the cleaning is the snow foam, not the foam cannon lol. The foam cannon simply lays down a layer of foam. It doesn't matter if it's thicker or runnier if you're using the same snow foam. What matters for cleaning potential is the actual chemistry of the snow foam itself. And I already have plenty of videos on that topic.

[@stephenlouden480]

they should've incorporated the top from the MJJC S V.3.0 that only needs a qtr turn to lock not really any threads to strip so it'll never break. that's the one I use. mjjc S v 3.0. I love it

[@PanTheOrganizer]

I'm sure they'll come up with version 3.0 of the Foam Cannon Pro soon.

[@peteraskerow]

Hi Pan Great video as always,but just as a rank amateur I was just thinking isn't the whole purpose of using a foam cannon is to have the foam bind as much as possible with the dirt and run off ? If a contact wash is always necessary to get rid of the film of dirt anyway,what's the point of foam sitting on the surface? What's the point of foaming anyway? Initial rinse,contact wash seems more logical to me.

[@PanTheOrganizer]

There’s a lot more to it. Here are a couple videos I made which should show you how snow foams can be very important as part of an effective pre-wash: kzbin.info/www/bejne/f2jdaZSgpM-FjKs kzbin.info/www/bejne/bpuYlX2Lgp15mJY

[@peteraskerow]

@@PanTheOrganizer Thanks Pan.Very informative.

[@PanTheOrganizer]

My pleasure!

[@ddautodetailing]

I have the v2 and the new S v2, both are great and produce nice foam. I like the thicker foam as it lets me get around the car while there is still some soap on the panels.

[@PanTheOrganizer]

👍🏻

[@JoelSc14]

is the s v2 similar to the new pro v2 ?? (i have the s v2 now) as far as foam production, or close enough ?? the s v2 seems nice, 1.1 installed for a ryobi, i'll swap if i use it on my gas one.

[@ddautodetailing]

@@JoelSc14 The S v2 does have its differences. I have a video of it on my channel. I really like the quarter turn for the head of the unit to the bottle. The foam output is just as good as well.

[@JoelSc14]

@D & D Auto Detailing so foam is similar with the s v3 and pro v2 ?? Thanks 🙂

[@ddautodetailing]

@@JoelSc14 yep! Foam is just as good from my experiences 👍

[@epixgamingcommunity]

Great video demonstration 👍🏻

[@PanTheOrganizer]

Thanks 👍 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@GypsyRok]

What I'd like to know is did the version 2 use more solution than version 1?

[@PanTheOrganizer]

Nothing noticeable. They seem identical, but I didn’t do premcise measurements as I didn’t feel the need to, as I could coat a vehicle with the same amount of solution with both cannons and still have the usual amount left over.

[@Tom_Lin]

7:48 that's my biggest gripe with the MTM bottles. I hate that tiny opening.

[@PanTheOrganizer]

I agree, they need to make a big mouth version soon. The competition is heating up lol.

[@RobFromCanada]

Hi Pan - I had a major issue with my Griot's foam cannon (only sprayed water, the soap mix didn't come up the straw), so I'd rather buy next one in person. What is the best foam cannon that I can buy by walking into a store (Toronto)? Thanks in advance.

[@PanTheOrganizer]

I don't buy my products and equipment in stores, as big box stores rarely have the enthusiast or pro grade stuff. I order online. Links in the description under each of my videos. Also, I don't know which store you shop in, and it might not mean we have the same stores in Quebec unfortunately. Ordering online not only gets you the best price, but the best selection as well and access to things not found in stores.

[@justinlins4720]

Good stuff now just finding the balance... What do you think Pan... Need some run off incase of any heavy dirt or particles... Keep up the good work 🤙🏻🤙🏻🤙🏻

[@PanTheOrganizer]

Thanks Justin

[@Jonathan1003]

Hey Pan any chance you can tease us for when your best of 2023 Products video might be coming ? 🙏🏼

[@PanTheOrganizer]

At the same time like every year. End of August to early September. It will be a mega one this year!

[@Jonathan1003]

@@PanTheOrganizer awesome man can’t wait super excited !

[@PanTheOrganizer]

😁👍🏻

[@abhisheksreedhar7997]

Impressive improvement 🤞

[@PanTheOrganizer]

Thanks for watching!

[@Notorius24]

Hey Pan, I too have version 2 and I also have a 2nd foam canon for my break buster solution, the only thing is that I'm afraid that leaving break buster I'm the foam canon might damage the internals. Do you know 8f they make a cap for the Mjjc, that way I could protect the internals of my 2nd foam canon

[@PanTheOrganizer]

Leaving Brake Buster in the foam cannon is ok for up to a month, but I wouldn't go beyond that. I had a solution in my previous MTM foam cannon for many months, and it destroyed the foam cannon unfortunately. Ideally, once a month, empty the foam cannon, fill it with just warm water, and run the foam cannon for 30 seconds to flush out any chemical residue. Also, every time I use a foam cannon for snow foaming the car, I mix just the required amount for that wash, and after use I rinse the foam cannon as per above instructions, and let it air dry. Ready for next use.

[@Notorius24]

Do you know if there is some kind of cap for the Mjjc foam canons?

[@PanTheOrganizer]

What do you mean by cap? Any accessory they might have would be on their website.

[@Notorius24]

@@PanTheOrganizer un couvercle sans le trou pour passer le tuyau, comme ça je pourrait conserver le produit sans danger pour le mécanisme. Mais je vais vérifier leur site

[@djbabygggudani7911]

Pan,just say thicker or foamier,don’t add “more” LOL!love u Pan,I’m buying the 2.0 thanks to your review

[@PanTheOrganizer]

Enjoy!

[@GF1Detailing]

What happened with the caps on the rims? What's the story there? Not used to seeing that fantastic job though! Thank You!!! One last thing is that V2 sounds quieter than V1.

[@PanTheOrganizer]

These were just the winter wheels on my girlfriend’s SUV (this was filmed during winter). A popular choice in Canada to help protect summer wheels.

[@TheCarDetailingChannel]

The 2.0 is still my favourite foam cannon

[@PanTheOrganizer]

It's very good.

[@maeharakeichi5039]

Ver.2 already available in Japan? I'd not like to go get the old Ver.🤔

[@haideralisobratee8508]

Hey so i sent my car for paint correction and ceramic coating last year july…. Since then ive been pre washing and using 2 bucket t wash car… i even dry with leaf blower… but somehow there r still few micro scratches(swirl marks)…. It’s frustrating as i take about 3 hours t wash my car and i still get some swirl marks…. Are they 100% evitable?

[@PanTheOrganizer]

I don't have any swirls or scratches on my car, and I wash it twice weekly. So the answer is yes. I don't know exactly how you wash your car, and what microfiber wash mitt you use, but there was perhaps a small rock that got into the fibers and caused the micro swirls? Hard to say without actually being there to observe how you do your washing. But if you stand a few feet back and don't see those swirls, I wouldn't overthink the moment. Cars are meant to be driven and enjoyed, and I'm sure you already have a cleaner looking car than anyone on your street or neighbourhood. All the Pan The Organizer viewers are ahead of 99% of the population. ;)

[@haideralisobratee8508]

@@PanTheOrganizer the swirl marks are barely visible in the sun... when i take a flash light at night i can see some

[@haideralisobratee8508]

@@PanTheOrganizer is there any way i can send you a picture so you can see if its that bad?

[@PanTheOrganizer]

No unfortunately, my e-mail is for business purposes only. You must understand that with almost 1 million subscribers, I receive thousands of messages daily across all platforms, so I can't even begin to think replying to e-mails too. If they are only very light swirls, there is one polish that exists that can be used to correct minor defects on ceramic coatings. This one: bit.ly/3NlPDFy I hope this helps.

[@haideralisobratee8508]

@@PanTheOrganizer yepp thankss.. yeah they are light swirl marks...

[@jamiele296]

Do u perfer this over the Mtm hydro

[@PanTheOrganizer]

MTM is still my personal preference. But I wish the MTM had a wider mouth on the bottle.

[@jamiele296]

@@PanTheOrganizer I appreciate the quick response. I will continue to use my mtm. Pan please keep doing what ur doing. You are a huge inspiration to me.

[@PanTheOrganizer]

Thanks for the kind words Jamie. I appreciate it. I'm always happy to hear that I'm an inspiration for my viewers. We're on our way to 1 million subscribers by next year. I'm blessed with great viewers like you. What's your favourite video on my channel so far, by the way?

[@firehot951]

Is there a bid wildfire close over there Pan

[@PanTheOrganizer]

I'm in Montreal, so we're ok for now. Thanks for checking in!

[@26DX047]

I have the MJJC V1 and I don't rate it at all, I prefer my cheaper Italian PA cannon from Autobrite Direct (in UK), main difference is the MJCC uses twice as much product, I can only go around the car once with the MJJC but I can go around twice with the Italian PA. Pan would be interesting to know if the product usage on the MJJC V1 & V2 are different.

[@stephenmiljkovic5584]

What snow foam did you use?

[@PanTheOrganizer]

I mentioned it in the video, and put links in the description. Phoenix EOD APEX Auto Wash.

[@xxHydroponicxx]

Thanks Pan

[@PanTheOrganizer]

You're welcome!

[@sheersy2987]

Most of the stock on the market now is V2 and V3 is on its way 😉

[@baronianmcclure8865]

The MJJC version 2 has a filter-metal gaze-filter inside the nosle there was no metal gaze in the version 1

[@vicalsi1568]

On V1.0 yo7 have to use the 1.1 mm orifice to get shaving cream thickness. V2.0 is MUCH thicker with a 1.1 than the pre-installed orifice. So far my V2 outshines all the others I have tried(Griots Boss foam cannon performed similarly)

[@ericlemelin3215]

I bought the mjjc one year ago, I don’t know why there is no foam getting out of it this year. I don’t know why

[@PanTheOrganizer]

Perhaps it's clogged with chemical residue. Do you rinse the foam cannon after each use? It's super important. After each use, I rinse the container, and fill it with hot water, and run that through the pressure washer for 30 seconds, to flush everything out of the foam cannon body and filters. Then I let it air dry, and store it until its next use.

[@ericlemelin3215]

@@PanTheOrganizer I don’t. But I will. Thx for the cue.