NEW MJJC FOAM CANNON S V3.0 | Many Say It's The Best Foam Cannon... Are they WRONG?

NEW MJJC FOAM CANNON S V3.0 | Many say it's the best foam cannon. Are they WRONG? In this video, I review the features of the MJJC Foam Cannon S v3.0 and I compare it against the MJJC Foam Cannon Pro v2.0 to determine which one is the best. You will see a product demo as well!
✅ Click here to purchase on Amazon: amzn.to/3QBzqOG
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
MJJC Foam Cannon S V3.0: amzn.to/3QBzqOG
MJJC Foam Cannon Pro V2.0: amzn.to/3tSI2Yi
Adam’s Mega Foam snow foam: amzn.to/44qsAPv
MTM PF22.2 foam cannon: amzn.to/3qtTeZN
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3QXdXA7
Water deionizer: bit.ly/3AMsMKf
Kranzle 1122TS pressure washer: bit.ly/3Fw4xp8
Mosmatic gun and wand package: bit.ly/3sQxxAh
Measuring pitcher: amzn.to/3DVcT83
🇨🇦 For people in Canada:
MJJC Foam Cannon S V3.0: bit.ly/3OTTv1B
MJJC Foam Cannon Pro V2.0: bit.ly/3ltOq3r
Adam’s Mega Foam Snow Foam: bit.ly/3rIBuqE
MTM PF22.2 foam cannon: bit.ly/3ChOGaN
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YyxvMQ
Water deionizer: bit.ly/3s4Cusk
Pressure washer: bit.ly/3MgYINZ
Gun & wand: bit.ly/3EBUZbI
Measuring pitcher: amzn.to/47wqaBu
🇬🇧 For people in the UK:
MJJC Foam Cannon S V3.0: bit.ly/45ePsCr
MJJC Foam Cannon S V3.0: amzn.to/3DTdYx5
MJJC Foam Cannon Pro V2.0: amzn.to/3YsEWVT
MTM PF22.2 foam lance: bit.ly/3edrrqt
Snow foam: amzn.to/47xBEEM
Water deionizer: amzn.to/3OVnupQ
My pressure washer: amzn.to/3shsFHw
Measuring pitcher: amzn.to/3DTXZim
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Watch more of my videos:
✅ MJJC Foam Cannon Pro V2.0 review: • MJJC Foam Cannon Pro V...
✅ How to wash your car: • HOW TO WASH YOUR CAR L...
✅ How to clean the interior of your car: • How To Clean A Car Int...
✅ Interior car cleaning essentials kit: • Interior Car Cleaning ...
✅ Car wash essentials kit: • Car Wash Kit - Everyth...
✅ Foam cannon battle: • FOAM CANNON BATTLE !! ...
✅ Water deionizer setup: • No More Water Spots Wh...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZbin, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my KZbin videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#MJJC #FoamCannon #Detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

[@PanTheOrganizer]

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: MJJC Foam Cannon S V3.0: amzn.to/3QBzqOG MJJC Foam Cannon Pro V2.0: amzn.to/3tSI2Yi Adam’s Mega Foam snow foam: amzn.to/44qsAPv MTM PF22.2 foam cannon: amzn.to/3qtTeZN Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3QXdXA7 Water deionizer: bit.ly/3AMsMKf Kranzle 1122TS pressure washer: bit.ly/3Fw4xp8 Mosmatic gun and wand package: bit.ly/3sQxxAh Measuring pitcher: amzn.to/3DVcT83 🇨🇦 For people in Canada: MJJC Foam Cannon S V3.0: bit.ly/3OTTv1B MJJC Foam Cannon Pro V2.0: bit.ly/3ltOq3r Adam’s Mega Foam Snow Foam: bit.ly/3rIBuqE MTM PF22.2 foam cannon: bit.ly/3ChOGaN Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YyxvMQ Water deionizer: bit.ly/3s4Cusk Pressure washer: bit.ly/3MgYINZ Gun & wand: bit.ly/3EBUZbI Measuring pitcher: amzn.to/47wqaBu 🇬🇧 For people in the UK: MJJC Foam Cannon S V3.0: bit.ly/45ePsCr MJJC Foam Cannon S V3.0: amzn.to/3DTdYx5 MJJC Foam Cannon Pro V2.0: amzn.to/3YsEWVT MTM PF22.2 foam lance: bit.ly/3edrrqt Snow foam: amzn.to/47xBEEM Water deionizer: amzn.to/3OVnupQ My pressure washer: amzn.to/3shsFHw Measuring pitcher: amzn.to/3DTXZim

[@garyniehus1773]

Fantastic and detailed video as usual Pan. Thanks from Australia.

[@PanTheOrganizer]

Thanks for watching!

[@archiepezek]

Great video as usual Pan! I have the 2.0 and prefer that model because of the wider base of the bottle, which helps to keep it from tipping over. You always go into much more detail than other people do when reviewing a product. Keep up the awesome work.

[@dtna]

Me too. Having a wider base on the older bottle was their selling point. And the older bottle had what appeared to be sturdier plastic. I'll stick with my old one.

[@pantac4493]

You have the MJJC Pro 2.0. The other product is the S line, it has its own version numbers, MJJC S 3.0

[@PanTheOrganizer]

Thanks Archie. I appreciate the kind words.

[@archiepezek]

@@pantac4493 I know

[@pantac4493]

@@archiepezek yeah. I think it’s the other guy that doesn’t know

[@grdn4sdg291]

I just purchased this foam cannon yesterday and appreciate the pro tips you have shared. Keep up the good reviews Pan!

[@PanTheOrganizer]

Thanks!

[@Riverguide33]

Nice review…and a good reminder about rinsing the internals of foam cannons. Thanks, Pan. 👍

[@PanTheOrganizer]

Thanks for watching!

[@richardseem7948]

Another awesome episode of Paaannn the Organizer.

[@PanTheOrganizer]

😁👍🏻👍🏻

[@freddrune8315]

Another great video. I really look forward to the next one.

[@PanTheOrganizer]

Glad to hear it!

[@neilwalker5041]

These videos are always fun to watch as everyone loves a good foam! Like you I have the MTM foam cannon and after a few years is works like new still. For me I value performance and can I service the parts when they fail. If I was buying today I would go with the MJJ because of equal performance to the MTM but with a bigger mouth to pour the soap in without having to use a funnel. Thank you for another great video Pan!

[@PanTheOrganizer]

Tanks Neil. Always nice to see regular viewers like you supporting my channel and videos.

[@mrshep49]

Love you pan. Thank you for your guidance man your videos helped me make the best decisions pertaining to my business. I have this mjjc foam cannon too, its amazing.

[@PanTheOrganizer]

Thanks for the positive feedback!

[@marktaylor9579]

I just got an MJJC Foam Cannon S V3.0 (here ib the UK) to use with my Karcher K2 (8 years old), and Bilt Hamber Auto-Foam, which as you know is not known as super foamy. I put the smaller orifice into the canon, and at only 2% PIR I got the most amazing foam I could imagine. I'm blown away with how good it is. This proves that it is a great addition to a low pressure washer system as that small apperture works wonders. It feels solid and the weighted tube in te reservoir measn that I can use it at angle which helps. Thanks for all your reviews Pan, I love watching them, and have picked up some greatt ips along the way👍👍👍.

[@PanTheOrganizer]

Thanks Mark!!

[@dlj1285]

Your videos reign supreme in this space. You are doing an incredible job. Keep it up. I have learned a ton since I have found your content.

[@PanTheOrganizer]

Thanks for the positive feedback! I appreciate it. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@dlj1285]

@@PanTheOrganizer I recently purchased one of my dream cars and started looking around for info around getting ready to care for it properly. You just sorta organically started coming up all over the place in my searches. Not exactly a surprise given the comprehensiveness of your content in the detailing space. You come across as a good fella too, which always makes it more enjoyable. I have no doubt you work your butt off, but it definitely seems somewhat effortless for ya. You seem quite organized. I really appreciate your content man, a clearly many others do as well ;-0

[@manrex5238]

Simply the best KZbin channel about call car detail thanks Pan

[@PanTheOrganizer]

I appreciate that! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@ThisOldDetailingDude]

Another incredible comparison. Thank you 🙏 for making detailing so easy with all your great content!, great explanations., great video quality.

[@PanTheOrganizer]

Thank you very much!

[@michellekempfsu]

Nice review Pan. I like the easy screw on cap. That is appealing to me.

[@PanTheOrganizer]

Thanks Michelle!

[@mariojavieracciaresi5436]

Always watching your shows here in Argentina!!

[@PanTheOrganizer]

😁👍🏻 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@redtees1]

My next purchase! Thanks again Pan!

[@PanTheOrganizer]

Enjoy!

[@randomuploads2346]

Hey Pan, thanks for the video. Tuning in from Australia and noticed you don’t have links for us down under. Would love to try some of the products you showcase.

[@PanTheOrganizer]

Unfortunately, I’m limited by the amount of text I can put in the video description, and it would be impossible for me to research links for all countries my subscribers come from.

[@panda51829able]

Started the upgrade process with the Mtm pf22.2 and sh35 gun and extension. Recently got the Mjjc pro v2 and the different is thickness with the 1.1 mm orifices is insane. So much thick foam. Looking to slowly turn my next garage into a set up like yours or Hawaii detailing thanks Pan! 👍

[@PanTheOrganizer]

😁👍🏻

[@richardseem7948]

Awesome video and product review/comparison good friend

[@PanTheOrganizer]

Thanks Richard! Always nice to see you as a regular viewer. I hope you’ll have a great day!

[@JohnLongdin]

Hi Pan, thanks for another first class review. Yes I'd like to see another cannon battle, perhaps including the Pyramid Car Care Hydro foam cannon which I've recently become aware of 🤔

[@PanTheOrganizer]

Thanks John!

[@hellraisingvtec]

Hey Pan, awesome video. I was about to ask which one you like best and than saw that you said MTM. Would love to see an updated Foam Cannon Showdown. Keep up the great work Thanks

[@PanTheOrganizer]

Thanks!

[@mnmn1665]

Excellent. Thanks. Have you tested the BOSS cannon?

[@ENDEE666]

I have the Griots cannon for a few years now. Love it! Had one issue where the ball weight on the tube started to rust and they replaced it with ease. No issue with the replacement ball for about a year now, and I'm more diligent about cleaning and drying it. Griots customer service was excellent.

[@ENDEE666]

I did have to buy the 1.1 orifice separately ($7) and that made it much better with my electric pressure washer.

[@Turtti781]

off topick.. i just was thinking i have never sayed thank you for your's grate videos to me learning my self to clean and detailing cars, so thank you pan :)

[@PanTheOrganizer]

Great to hear! Thanks for the positive feedback. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@coreymerritt7742]

Great video pan I have the version 2 and it works awesome 👍

[@PanTheOrganizer]

Thanks Corey!

[@BNIC2413]

Great, great review Panos... I have the MTM and even though it's foam is nice, it is a little too runny and the bottle seems to empty very quickly. I also run the same Kranzle PW as you so thats why I might be considering to change but you are right, the MTM is very well built... Thanks as always for your AWESOME video.

[@PanTheOrganizer]

Thanks!

[@soothy69]

Once again awesome details for us. I have the 2.0 as well as the MTM PF22.2 and really prefer the MJJC 2.0. It just gives me that shaving cream-like foam better than the MJJC. Heck, even my 11-year-old daughter likes foaming up her ATV after a muddy ride to clean it up. Pan, you make detailing with all these toys just fun for us guys who just take care of our own cars and trucks.

[@PanTheOrganizer]

Thanks! I truly appreciate the kind words and positive feedback.

[@MatthewM8]

Would love to see a video comparing pump sprayers/battery pump sprayers battle! I use these for rinseless washes so that would be awesome to see.

[@PanTheOrganizer]

Great suggestion!

[@davestewart9146]

I only have one foam cannon and it’s the MJJC 2.0, I absolutely love it, great video Pan 👍😁

[@PanTheOrganizer]

Thanks Dave!

[@CardosCarDose]

I love that the neck of the bottle is wide as it makes it easier to add product or rinse out 😎👍 That price tag is a bit of a tough pill to swallow considering it is not using the premium materials as something like the PF22 from the housing and plastic bottle. I might need to do a review video as well 🤣 Thank you Pan for showcasing this demo! Appreciate your work that goes into these!

[@PanTheOrganizer]

Thanks man! I hope you are doing well.

[@GLI_1701]

Another awesome video pan I've been using the mjjc pro2 for over a year and it is absolutely the best foam Cannon you can buy. I use it with my active 2.0 pressure washer it is absolutely amazing. I like to use 3 oz of Meguiars hyper wash and an 1 oz of purple Power.

[@PanTheOrganizer]

Thanks for sharing your experience!

[@ddautodetailing]

I have both of these foam cannons and they both work great!

[@PanTheOrganizer]

Yup!

[@bze5629]

Pan your the man ! Yes do a updated foam cannon battle with chemical guys wide mouth n all new upgraded mjjc's

[@PanTheOrganizer]

Thanks!

[@jcal5594]

Great video as always, thx Pan! So I hope MTM is watching closely. I like their internals, but agree that the bottle opening needs to be enlarged and while we're at it, a flexible weight syphon tube couldn't hurt. Careful MTM... MJJC might steal your lunch. 😮!!

[@PanTheOrganizer]

;)

[@LoudModeOn]

I have the MTM and the Pro 2.0 and find the Pro 2.0 to be more consistent. I also prefer the plastic to plastic screw top on the Pro 2.0, very easy to over tighten the metal to plastic one on the MTM. Looking to forward to the Pro 3.0!

[@JT-bb3ip]

Thanx for another great video. Does the s hold the same amount of liquid as the pro or is it smaller capacity

[@PanTheOrganizer]

Slightly less capacity compared to the Pro, but barely noticeable.

[@xxHydroponicxx]

Definitely ordering two s3.0 cannons. They work flawlessly and look great. Thanks Pan ❤

[@PanTheOrganizer]

Thanks for watching! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@xxHydroponicxx]

@@PanTheOrganizer I recently purchased a Karcher Premium K4 to wash our family cars. Then I started to watch detailing videos to get advice on techniques and accessories and I found your channel and I've been watching your updates ever since.

[@PanTheOrganizer]

Cool! Merry Christmas!

[@simonlandry3438]

Great video, I love the tips you gave for the general use of foam canon. On an other subject following 2023 awards, i would love if you could add a cotegorie in tire shine and split gloss finish tire shine mate finish. I left you a comment detailling my tought on the award video, but i m not too surprise if you didn t see it, you had so many comment on that video. Good job pan keep the good work.

[@PanTheOrganizer]

Thanks I appreciate it!

[@edo-j1784]

Pan, did you do a video yet on the MJJC Foam Cannon Pro V 3.0? I always take your tips and reccommendations when detailing my own cars and cars of friends and family. Keep up the Fantastic work as it keeps us up on the best products out there and their price range. Thanks!

[@PanTheOrganizer]

The Pro V3.0 hasn't been released yet to my knowledge. The most recent one is the S V3.0 shown in this video.

[@edo-j1784]

@@PanTheOrganizer There was a listing on ebay by someone claiming to have the Pro V3.0...The listing has since been taken down, so now I do not know if it truly was the V3.0 or the S V3.0. My bad I should have taken a screen shot when I first saw it. Or maybe my eyes failed me! lol

[@Ecdetails]

Great show off pan , I never change the orifice out , I also have the kranzle. I did test the orifice swap on another foam cannon and the foam was a little more but not enough to justify taking a screw driver out haha 😂.

[@PanTheOrganizer]

Thanks!

[@ibaadmemon8049]

Great as always.

[@PanTheOrganizer]

Thank you! Cheers!

[@JeanPierreWhite]

Appreciate your advice on flushing the foam cannon after use. I am about to receive my new foam cannon and was not flushing the "free" cannon that came with my Active 2.0 pressure washer. I can maintain my new foam cannon correctly straight out of the gate.

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@mcleancar33]

Waouhhh on est synchro la mienne est programmé pour dimanche mjjc s v3 vs v2 pro 😉😉😉

[@user-zh8vz8eu9q]

I had a small issue. I bought the blue one mjjc foam cannon , I was walking in the garage with the lid opened and a white rubber ring felt on the floor. That white rubber ring is important to make a tight seal when using it. This happened after I cleaned the equipment. I could have easily lost the white rubber ring if I had not payed attention. I had the top portion in 1 hand and the bottle portion on the other hand. Besides that the equipment is amazing.

[@JhawkerZ]

NV Storm. I just got that along with my MTM. I would like to see you check out the NV line.

[@the_jnlt_channel]

Got both cannons, I think I do prefer the pro jush because of the wider bottle which also seems more durable 👍

[@PanTheOrganizer]

Good choice!

[@airpoduser697]

Hi Pan, great video as always. Would you recommend either of these over the mtm?

[@PanTheOrganizer]

I still prefer my MTM but both MJJC foam cannons are excellent.

[@airpoduser697]

Thank you Pan, Will be trying my newly purchased MTM. thanks for the advice.

[@danieldalton1757]

I bought the Sooprinse foam cannon off Amazon for $20. I put in a 1.1mm orifice as well, and so far it has worked great. It definitely doesn't feel as durable as some of those other foam cannons look.

[@PanTheOrganizer]

Never heard of that brand.

[@functionaldoc5054]

I would like to see these cannons go up against MTM PF22.2 foam cannon. I do like the weighted tube and was wondering if it would fit on your MTM cannon? MJJC cannons seem to have longer spray head then MTM foam cannon. Nice review of these 2 products.

[@PanTheOrganizer]

Thanks

[@KonstaNykanen]

Awesome demo Pan👏🏻! I personally think there are no performance differeneces between the Foam Cannon S V3.0 and the Foam Cannon Pro V2.0, both work super well and create nice thick foam👌🏻. Perhaps the change of orifice made the foam slightly thicker, but your pressure washer set up is so good anyways, that the difference is pretty much impossible to notice🙂.

[@PanTheOrganizer]

👍🏻

[@KonstaNykanen]

@@PanTheOrganizer 👍🏻❤️

[@E85_STI]

I use warm distilled water and it makes even the cheap foam cannons work better. Also coated vehicles probable don’t keep the foam on as long as an uncoated surface.

[@P-47D_theJug]

I like it the red one. The MTM HYDRO bottle sticks and at least for me the foam isn’t that great. I have tried different orifices but no good.

[@YzFool78]

I just the 3.0 in over the weekend, does fantastic! I feel like I was missing so much more from a foam cannon once I got this one. I haven’t tried the 1.1 yet, but does give a thick foam (using GSF) with my Ryobi 2000 pressure washer.

[@MisterDogg]

I have a Ryobi, did you need to buy a special attachment to get it to mate correctly?

[@YzFool78]

@@MisterDogg If you’re already using quick connects, you just simply connect to that.

[@MisterDogg]

@@YzFool78 thank you

[@JohnSmith-dd1vl]

Thank you for your next great video. BTW you can measure diameter with digital calliper - it will be more accurate and result will be easier to present in videos.

[@afonsofreitas3595]

A general idea is enough, doesn't really matter 😂

[@JohnSmith-dd1vl]

Pan, as he said himself in different videos, is trying to make as best videos as possible. My advice was just about how he can make another improvement step.

[@justplanefred]

I'm debating between foam cannons and the Ik E Foamer.

[@rickraub5448]

Tks. I’ll be buying the 3.0. 👍👍

[@PanTheOrganizer]

Thanks for watching!

[@hustleman1379]

Question for you sir I have the mjjc pro and I'm using a Sunjoe spx3000 with 1.76 psi and the foam Canon just start acting up lately it's not spitting out foam is there any way that I can fix it or should I just order another one of them small pieces to put in the cannon part

[@rajfar7]

I like the new one but not at that price point. As always great info Pan

[@PanTheOrganizer]

Thanks!

[@TheWhitde]

Mine's in the mail... can't wait.

[@PanTheOrganizer]

Enjoy! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@macula_]

I do have an issue with my PRO 2.0, after a couple of months of weekly use, I can't close the bottle, seems like the thread on the bottle side and the one on the top don't fit perfectly as when it was brand new. Several times when I'm washing my car, the bottle fell out to the floor, super annoying. I'm looking to upgrade to the v3 version, hoping, as you said, to the closing mechanism to be improved. Great video, Pan!

[@PanTheOrganizer]

Thanks!

[@BillaDaKilla]

Hi pan do you do you touch up paint before paint correction or after? I am planning on doing a DIY ceramic coat with Adams Advanced soon. Thank you for all your advice. A touch up paint Vid would be tits!!! 😂

[@kristianriverasantiago1856]

Hey Pan! Thank you so much for all your videos! I bought this foam cannon and tried for the first time and had issues making foam, also it went through a whole file out canister without getting to cover all my car (large suv), not sure if my issue is the foam cannon (mjjc s v3), soap (Adam’s car shampoo, blue one) or pressure washer (green works 2300 psi brushless). I had the dial on the top of the foam cannon set to max (clockwise) is that correct after I finished I thought I never adjusted it. Any help is appreciated.

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 950,000 subscribers and we have over 127 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. There are many factors that influence the quantity, thickness and richness of snow foam: 1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup) 2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM) 3. Type of snow foam (not all snow foams produce the same amount of foam) 4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed). 5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.

[@dubious4581]

Hey pan! Have just gone through a lot of your videos and purchased a lot of your recommendations - I was going to buy the eFoam pro but realized its $250 I mostly wanted it just to apply the brake buster you recommended. I have two spare foam cannons am I able to just use those instead of the eFoam pro I would just normally spray it but its not as cool looking and satisfying as what it looks like in your videos hahaha. Do you have any other eFoam recommendations?

[@PanTheOrganizer]

kzbin.info/www/bejne/m6Skg4Jrdtd1jpIsi=bZ9CJgilziMQyCIo

[@patrik9745]

to me it looks like the 3.0 makes like 5% thicker foam, i have the 3.0 aswell and i can say that so far i am extremely happy with it, i would buy it anytime again, no 2nd thoughts

[@Ray_Chien]

Hi Pan, I saw that in some of your previous videos, you use brake buster in a foam cannon, while in other videos, you put it in IK foam pro 2. Do you have a preference? Which one do you use in your maintenance wash?

[@PanTheOrganizer]

Foam cannon as it’s more efficient.

[@paul6749]

Hi Pan, thanks for a detailed video - I am struggling to understand why MJJC are offering both these foam cannons - the differences between the two models appear minimal

[@PanTheOrganizer]

That’s a good question.

[@afonsofreitas3595]

I have the new 3.0 S one and it's the best foam cannon I've ever had, but, just as an experiment i ordered a cheap one from a random brand from amazon and i found that it does ALMOST, not the same, but close, to the same foam. MJJC is way better in terms of quality of construction but it's interesting to see that cheap one are getting better. In terms of reliability, i think that the MJJC one is going to last a lot more, but costs 3x more that the cheaper one i ordered. If i had to choose one i would choose MJJC, no doubt.

[@MikesAutoDetailing]

What a paaaaaaaaaantastic review, I prefer version 2,0 because the bottle is more sturdy

[@PanTheOrganizer]

Thanks Mike!

[@trd3786]

I have a Kranzle 1322TSS. I had an MJJC foam cannon pro v2 which lasted a long time and started shooting soap water. So I changed the filter and clean the weighted filter ball in the foam cannon as well. Still soapy water. So I bought a brand new MJJC FOAM CANNON PRO V2 and still the same thing. When I tried using my MTM PF22.2 it works fine and gives nice foam. Why do you think both the older and new MJJC foam cannon pro v2 are giving soap water? Any advice appreciated! Pressure seems good when using all the foam cannon but with the MJJC seems like it has less flow of water for some reason. I could be wrong but that’s what it seems like. The dial to control the amount of foam is turned all the way to max foam so idk what else to do? Should I buy the new MJJC foam cannon S v3 and try that or should I stay away from MJJC foam cannons now? MJJC foam cannons are my favorite so I would hate to change to a different brand. Please help! Thank you!

[@Messi10billy]

Hi pan Should i straighten/retract the car wiper and clean it? Because i saw many videos of car washing dosent even clean the rubber side of the wiper

[@PanTheOrganizer]

Here's my video on cleaning wipers: kzbin.info/www/bejne/m3OYf6eqqa6ehqcsi=-MihLmoimUdBehPJ Any time you are looking for a topic, I most likely have a video on it. Here, you could have searched for "how to clean wipers Pan The Organizer" and you would have found my video.

[@emberfuldragon9514]

Hey Pan, love you videos! I just got a brand new car and I noticed there are tiny water spots on the glass and it starts to annoy me when the sun hits it just right. I was thinking about buying invisible glass: glass stripper and soft 99: glaco ultra for the windshield. Should I use a glass stripper this early on a new car or would that destroy any of the current protection on the glass?

[@afonsofreitas3595]

No problem as most dealerships don't apply any sort of protection, just make sure you do it correctly and correct application. Pan has more than 1 video on how to do it 😄

[@PanTheOrganizer]

Yes you can use the glass stripper right away, you can even machine polish the glass too if the stripper isn’t enough. And you actually want to remove any cheap protection that might be on the windshield anyways, so the Ultra Glaco can have the best bond to the glass.

[@barry2557]

I have a Mach E GT. Should I wash my car the same way I would wash an ICE? For example, I use one peddle drive so there’s very little beak dust. Do you clean the wheels the same as an ICE car?

[@aliamini526]

Friends, please guide me in detail, is the 1.25 nozzle suitable for devices with a working pressure of 180 bar and does it work well, or should I use the 1.35 nozzle?

[@Philippe.63]

Il parait qu'une prochaine version du pro en V3.0 est en cours. Bien le bonjour de Belgique Pan.

[@PanTheOrganizer]

Oui ça fait plus de six mois que j’entends cette rumeur hehe

[@JohnD15317]

I’ll end up getting one of these for next years car wash season

[@PanTheOrganizer]

👍🏻

[@smileyjoker5745]

Hello everyone! How do you guys think is it safe for the mjjc sv3 foam cannon to use APC as a pre rinse and if safe then at what approximate dilution?

[@aliamini526]

Does it work with all types of 180 pressure devices?

[@TheCarDetailingChannel]

I like the pro version in almost every way except for the way the head attaches to the bottle

[@PanTheOrganizer]

I can’t wait to see what the Pro V3 will be like.

[@davidmaldonadocastillejos3179]

It seems a good product. Have you tried those 'coloured' snow foams?

[@PanTheOrganizer]

We don’t have them in Canada yet.

[@daltonschannel8405]

I'm a big fan of MJJC and personally I like them both but the pro does seem to be a tad easier to deal with when setting them both down but my neighbors think the 3.0 is so cool looking & so do I. lol

[@o0Hotiron0o]

thank you

[@PanTheOrganizer]

You're welcome

[@xxHydroponicxx]

What are the best foam cannons for the Karcher 4 high pressure? Thanks Pan

[@PanTheOrganizer]

I don’t understand your question.

[@jholland9952]

I’m holding out for the MJJC Pro v3 which the company claims will be out by the end of 2023. It is rumored to combine the best features of the two you present (quick twist of sv3, wide mouth/stable design of pro v2), stainless steel parts and potentially more foam generation. Looking forward to its release and testing…

[@CarsWithKeav]

I talked to them just yesterday and I was told it’s being delayed till 2024 hopefully before spring.

[@PanTheOrganizer]

I’m looking forward to it too.

[@salman13]

You don't really need it.

[@francesco333]

​@@PanTheOrganizerfirst foam cannon; MTM or MJJC V3?

[@flytyingguy1]

Pan quick question I recently saw a video where the guy was saying you don’t want a heavy foam that you want the foam to be more running allowing the dirt to roll off. What’s your take on it. I had a cheap Amazon cannon & didn’t get all that much foam but now I bought the Boss Griots Garage which is giving me insane foam. Thanks

[@PanTheOrganizer]

That’s like those who prefer rinsing before foaming or foaming on dry, etc There isn’t one right or wrong here it often boils down to personal preference. Some people prefer runnier foam and some prefer that shaving cream thick foam. For me, the more important thing is getting a quality product. I don’t mind if it’s runnier (like Bilt Hamber Touch-Less) or thicker (like DIY Detail Incredible Suds). Both are excellent for different reasons.

[@Pittsburgh-412]

I think i like the pro a little more. Not only its a little bit more sturdy but it look like its more durable

[@SunukKim]

The O-ring for my MJJC S V3.0 broke. Please have them sell that individual part.

[@madweazl]

Is there a recommendation for something like the Active 2.0? Seems like the GPM is there but maybe the pressure isn't optimal for something like this?

[@PanTheOrganizer]

For washing cars, you want 1000 to 2000 psi max. Don’t go over 2000 psi. What we look for is the highest water flow rating (gpm). 1.3 gpm being on the low end and 2.0 gpm being on the awesome end. See my video on different pressure washer recommendations at different price points here: kzbin.info/www/bejne/lYbafJJmi6l-ZtEsi=MVRkpFHgNbmGqW36

[@gearlstrickland3365]

Where did you get the little measuring cup from?

[@PanTheOrganizer]

I have had this for over 15 years, it's not available anymore unfortunately.

[@aliamini526]

I can use detergents or touchless materials that are used in car washes

[@davidsteckley8846]

Pan, do you run your detail business out of your home garage? Is it difficult to get your customers to come to your home address? Do you tell them they’ll need someone to pick them up? Or let them hang out while you work in their vehicle?

[@PanTheOrganizer]

Yes I detail from my home's garage. I designed the garage specifically for car detailing. I never have issues to have customers come, especially since starting the channel, I could do multiple cars each day if I had the time, as you can imagine with an audience of nearly 1 million subscribers and many more watching. Some do up to 15 hours of driving to come and see me, and rent a hotel room nearby. They have to drop off their vehicle on day 1, and come back to pick it up the following day. Yes they need a lift to come and go. Nobody is allowed to stay and "hang out" out of respect for my family, and neighbours. I want privacy.

[@efrits86]

what pressure washer do you recommend for the at home detailer

[@PanTheOrganizer]

You're in luck. I have a video on pressure washer recommendations at different price points here: kzbin.info/www/bejne/lYbafJJmi6l-ZtEsi=iucNnMJ-kJf9-q35

[@maxelnoyl3597]

The Griots one works great. Too bad the metal ball rust really badly. I’m getting rid of it for that reason.

[@PanTheOrganizer]

I never had such issues. And does the rust affect your solution?

[@S_Paoli]

based on Pan's recommendation, I bought the MJJC foam cannon from Walmart's website. wow.... it's the best foam cannon every. In fact, my neighbors always watch me turn my cars into snow white cars... :) The only problem that I'm wondering is the coming winter. if it's below freezing outside, can I still use the foam cannon to wash the car?

[@PanTheOrganizer]

I wouldn’t recommend washing your car in freezing conditions.

[@elliotsimpson3591]

Unless quantity of snow foam mixed in my cannon is an issue (it isn't currently), I would go with the MJJC Pro v2.0. The biggest difference I've found in my snow foam cannon is the pressure washer behind it. I've got the Karcher 1700 and my snow foam tends to be runny, regardless of which orifice I have installed (paired with Adam's soaps/Mega foam and soft water). All snow foam cannons have an adjustable/replaceable orifice. Wide mouth is a must. I personally prefer shorter, stout bottles as they're less likely to tip over, especially when taller ones with high volume become MORE top heavy. The clear bottle on such a tall bottle with the V3.0 would start to look tattered very quickly as it falls over regularly. Also, I'm VERY happy to see that you remain objective, Pan. I've looked at a lot of OG's content for reviews and objective comparison, but found that most of the items OG carries tend to be the best of the best, money-is-no-object items that some of us don't have the money to spend/justify for personal use.

[@PanTheOrganizer]

Thanks for the feedback. :)

[@Javiergonzalez-ku4pm]

Mi estimado Pan saludos

[@PanTheOrganizer]

😁👍🏻

[@ohmyHomey]

Can we share the same foam cannon head for both Adam mega foam and P&S brake buster in one car wash session (in different bottle)?

[@PanTheOrganizer]

I wouldn’t recommend that, as you need to flush the cannon head from any chemical residue with regular water before switching to another chemical.

[@richardseem7948]

Both looked the same.results are subjective at best.amazing product line .I still love and use my tri nova...

[@diegosolano3570]

It would be great to have a video of the best foam cannon by price range because even the Griots is 88$ CAD right now

[@PanTheOrganizer]

kzbin.info/www/bejne/rXeYoXeGepypqJIsi=K6wt4gOZ2nXjNztu

[@viperrcr]

I prefer the Pro V2, the stronger, lower, wider bottle is more durable and even less likely to tip over. The even wider mouth enables it to be cleaned SO easy after! The clarity of the S V3 is neat but the Pro V2 is opaque enough to see color and contents. Both are my top two foam cannons even over the MTM PF22.2.

[@PanTheOrganizer]

Thanks for sharing!

[@richardlindsey7112]

Of course there is no difference. As you said the operating parts are the same. Only difference in making the choice is the bottle and straw differences