Hoverboard/ Balance Scooter - Solid Light & Dead Motor Fix/Repair!

[@Saldarya]

Thank you so much! Thanks to you, I was able to fix my son's hoverboard! I ordered the parts off of Ebay, and they came in a week earlier than expected. After following your video, which made the entire process so easy, the hoverboard was fixed! The whole process took around 20 minutes to complete!

[@LilSwervoJr]

Thanks,so much you helped alot I started to cry like a baby!!

[@brunoaduarte]

Why there's no info on how to fix the gyroscope board itself instead of replacing it ?

[@applefanboylee]

happy new year jay and family (from the uk) can't wait to see more of your vids next year

[@pandareme1794]

This is amazing im gonna try to fix for my neigbors. I think this will help a lot.. Thank u so much for doing this

[@TommyHilfiger888]

lol why am i watching this, i dont even have a swagway

[@LowkeyLianaGucci]

+TommyHilfiger888 LOL

[@anomaly.authentic593]

saame

[@mohamedehabsakr5685]

Sharkzz1

[@omarsherif271]

Are you crazy you are stupid

[@omarsherif271]

Your the most bad guy

[@cwdrsch]

can you give new website with the part

[@tuckers8470]

Happy New Years Jay! (Coming from Australia)

[@MattPryze]

Same issue. Bought a new motherboard, replaced it and the problem persists. UPDATE: Turns out I also had a broken wire. A small thin blue one. Check carefully because I missed it! That and the new board fixed it. Old board was fried, I think during calibration I pressed it down while calibrating and that fried it. Careful.

[@Daks998]

Fue un gran año,grandes videos y grandes réplicas sigue así y espero y triunfes en tus futuros planes!!

[@TheRegularsGerm]

i work at a repair shop and with my knowledge and experience the green sensor or gyro is the better ones.. the blue ones are always having to be replaced

[@cortlynkaiser4618]

do you have any cheap sensors. .??

[@TheRegularsGerm]

+Cortlyn Kaiser no i dont personally .. its the shops haha but we fix the balance scooters there ahah

[@AdrianRodriguez-kb3fu]

+Mark Rodriguez HEY I KNOW YOU YOU PRETEND TO WORK FOR AN RC SHOP RIGHT? LOL

[@cortlynkaiser4618]

+Mark Rodriguez y'all don't have any sensors??

[@TheRegularsGerm]

+Adrian Rodriguez This guys a troll hahahah lololololo

[@Ax4ntiiGaming]

Anyone have advice? Earlier today i tried to recalibrate my hoverboard, and when i finished doing that one side stopped responding to pressure, it had a solid blue light but no reaction to weight.

[@reinaldofuentes6884]

Que precios manejas y lo que veo cada día es que todas tus réplicas son las mejores. Te deseo los más grandes éxitos

[@jay30one]

where did you get your boards at all the ones i look up look like crappy wiring in the pics can you post a link or seller name thanks

[@kashhause6362]

hey jay. I took my brothers hoverboard apart because he wanted to paint it now it has one blue light that stays on even when trying to calibrate it, will this fix it?

[@carlosazteca8441]

Is the same procedure to repair a 10 inches wheels hoverboard ???

[@rami416]

mine is green board and mine looks like the blue one u have like professional one so do i have the good one i had mine for 1 month and 9 days

[@RAFID]

do you think this kind of hoverboard can last at least a year without needing any kind of repair ?

[@alayzia.9584]

R A F I D My didn't even last 10 months

[@rjcool0079]

thank you so much I could not find a video to fix it

[@mohamedehabsakr5685]

yes its very good

[@robertmotion]

What brand/model is your board? Nice …. /Bklyn👑

[@hh_ochzz4891]

do you only need one gyro to fix both sides if they both dont work

[@nick_ventura]

I have the blue one and it broke 😔

[@imtiyazsahil3814]

can i get the link where you bhought thah

[@smexy462565665277367]

What website do you buy it from

[@ignacioespina4701]

Hey did yoy bought the blue part from ebay?

[@cosminellamilos]

Any link to order the new piece, please ?

[@ryanarriola1854]

my board has a problem where my right light gets turned on and when i step it doesn’t move. the left side does not turn on at all. both sides shake when i try to move my board. is there anyway i can fix this?

[@baileyloeb3852]

Hello, I did all of your steps and the steady blue lights are off but it will not calibrate. What do I do?

[@ricardofrescas8052]

if you have any internal problems just reset it here are the steps. 1.turn off your segway. 2.hold the power button 5-7 sec. 3.the front lights will flash 5 times stop and flash 1 more time 4.after that last flash turn seg way off. 5.fwi make sure your hoverboard is leveled

[@MotivationDesires]

+Ricardo Frescas Thats Exactly what caused the segway to have problems. I did that and mine turned out what the video is showing

[@ricardofrescas8052]

It worked with mine

[@MotivationDesires]

Ricardo Frescas I have been hearing old models had problems with old motherboards. I may be wrong. You probably have a new version. I could be wrong

[@loganwright6457]

Mine has the blue board you showed, however mine is still showing a blue light on one side, yet not working on either. What do I do?

[@levipicturesxd1050]

Same, and the one that doesn't have the light doesn't work. What can I do???

[@cilalee8330]

mine too

[@jaked9538]

SnailSklz same

[@Saldarya]

Replace them. It's really easy. I ordered replacement parts, and received the green ones. After opening it up, I realized it was the blue ones I was replacing (which only worked a week when we bought the hoverboard). They work great!

[@bryanveliz8341]

What if both light are on do I have to switch both?

[@jeremii2x541]

+Mayiandjay When will you review the new Goophone i6s???

[@djjaylexx4210]

wats the link to buy the gyro

[@alphadarling]

+mayiandjay When are you going to review the Goophone i6s ??!!

[@erictong862]

Can this problem result from calibrating your hoverboard? By holding down the power button.

[@asdfasdfasdfasdf9820]

+Eric Tong That's exactly what happened to me. I tried calibrating it and one side stopped working.

[@erictong862]

+lol lol I heard online that this could happen when you calibrate ur board while pressing on the foot pads, it says that doing that will fry the board. I hope this doesn't void my warranty.

[@asdfasdfasdfasdf9820]

Eric Tong The problem also is that if you do it on a soft surface like carpet. The board will think that it isn't touching a surface, and it will fry the gryoscope inside of the machinery, you can either just replace it or get another one from the seller you've bought from

[@roberttrainor5017]

could u pls check for me if this is a good Gyroscope for my hover board

[@roberttrainor5017]

//www.amazon.com/XA-Hoverboard-Gyroscope-Intelligent-Replacement/dp/B01I31JTEA/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1476144649&sr=1-1&keywords=2+Hoverboard+Gyroscope

[@SRT313]

Hey my hover board won't move at all, it only has one light that stays on. When I press the other side it lights but nothing move neither side.

[@lazaress1]

Is there one for the lambo version?

[@zuroxtv2199]

It's the same thing

[@simaakafrika9711]

What is the name of that part

[@jujuhernandez5636]

how much do they cost ?!

[@amanali9271]

please help me i have S-J-F model hoverboard the balance light is not work

[@hayleycalise8781]

I have blue but it has glue all over like the red one.

[@nikhil5619]

how to change imei number in iphone 6s clone dualcore?

[@bannanagamingo2877]

How much does it cost

[@justinparks654]

dude you talk WAY to much. 14min video could've been 3mins

[@johnwatson4801]

You are absolutely right! Sooo much waffle.

[@sharleekrogh2622]

dude you hate WAY to much. Rude comment could've been kind.

[@abrarabrar3615]

my Bluetooth hover board one side is not working how to fix it help!!!!!!!!!

[@rami416]

why is there different colour blue and red

[@Octoberbbyy]

Dang, I really want a hoverboard!

[@LowkeyLianaGucci]

OMG... There's glue that's wow...

[@DanielsLegacy12]

Omg thanks you mine its fixed

[@thatsangela2046]

My hoverboard with Bluetooth dont work both sides what to do?

[@icepol1831]

can you help me with somting ??"hoverboard".

[@elirix2589]

i cant open the plug!

[@raxtergaming1665]

brother my hoverboard has the problem that i does turn on just for a sec and turns off and its not charging aswell when i press the start button it shows all lights and turns off and no beeb aswell Plz help me I'll post a video if needed

[@astroboy7931]

i have the bleu one but it doesnt workk after 2hours that i had the segway it was already broke i see 2 green lights but it doesnt drive

[@xalataf3365]

You mean a Swagway?

[@astroboy7931]

Yzs

[@astroboy7931]

No hooverboard haha

[@Monica90877]

I change the motherboard and the wheels still not working

[@scroboy]

PLEASE DO THE GOOPHONE REVIEWS

[@dustinplee5067]

My hover board is blinking the blue light and what does that mean I just got my hover board of of letgo

[@jaked9538]

When yours is blue and glued :P

[@rubencaldera6955]

on my hoverboard there is a beeping noise when no one is on it is still charges the Bluetooth stopped working... does anybody know what this means or how to fix it

[@LowkeyLianaGucci]

+Ruben Caldera It's probably a small issue... Look at the video on my channel on how to Re- Callibrate it ( It's the red light video ) Don't give up on it yet... Also try re- calibrating it more if it doesn't work the first time.

[@rubencaldera6955]

Ok thank u I'll try that

[@OfficialSkateClips]

Link?

[@Diamond-ui1ge]

Mine is bluethooth i fix it but the light dont work!

[@mlgeisbar2897]

cool hoverboard

[@paulwakefield6634]

Hi everyone yes I have a problem with my MiBOARD it seams that there are different names for the balance or hover board, mine is called MiBOARD . Anyway my problem seams to pose a slightly different problem to the one's experienced in the videos. I go through the re calibration as many of you have explained , so then I turn it back on i have the green battery light on indecating power ?, when applying a little pressure on the foot plate the running indecator light is green for 2 seconds and one wheel turns then stops and go's back to red light and no function, could it be low power even though the battery is showing a full block green.

[@MattPryze]

Paul Wakefield same

[@eliaskling1984]

thanks for the help

[@haleluye3659]

Ay lav yu ay lav yu Du yu lav mi? Yes ay du

[@RobloxLover2013]

My hover board only works on one side and I spin in circles. I took my hover board to this weird shop and said that the sensor is weird. So I decided to see videos.

[@peytondarling8060]

i did mine and it didnt even turn on

[@aoibhexoxaoibhexox3361]

I have the same problems

[@CrazyGamer-sq9ic]

Nice video

[@ELAI_aerospace]

thankksssss!!!i love 'ya

[@williamholloman]

I'm sorry but my name is Wednesday so you see me with soccer and I have to you and your friend so I wish you a Merry Christmas and a Happy New Year

[@aqizz-gaming7048]

rip my swagway

[@dantekick2365]

So you can buy the cheapest one as long as you have the blue piece

[@dantekick2365]

The cheapest scooter

[@fredtaylor2618]

I been watching every video doing everything and it still haven't worked

[@adrianeliezermedinamendez4255]

Mola mucho

[@shadowhunter2382]

I used to hate hoverboards

[@bluejgo]

They all made in China, but they make different quality products for different consumer groups.

[@durpsnorlax4253]

I AM DE ONE< DON@T NEED NO GUN

[@johntucker3004]

Wtf I need a new motor? I only had this shit for almost a month and I did not crash it when it happened

[@anexonel]

Haha both my sensor boards broke and the metal frame! Changing the frame was long but easy.

[@MJTechChannel]

Yeah man some burn out fast! Happy new year!

[@anexonel]

Happy New Year!

[@izay.261]

Anexonel Hi where did you buyed the gyro sensor?

[@anexonel]

JOHAN! my cousin sold me his board for pretty cheap so I just switched out the electronics

[@abrarabrar3615]

please help

[@williamholloman]

I wish you all Merry Christmas oh you don't have a prize hope you didn't get any presents and stuff the other thing you got is a hoverboard I don't wish you a Merry Christmas come to my house and fix my hoverboard and I live in Florida Kissimmee Florida 611 house to be exact and make sure you come fix my hoverboard for Christmas cuz if not Christmas here for Christmas I will cuz you know Grinch you know the French right I will come to your house and still present

[@LinhNguyen-sr5ln]

HOVERBAORDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

[@scdnj]

Hahaha another problem with this, wow that product is pure BS... Exploding batteries, motor that stops working, ... What will be the next one ?

[@jgueroz71]

People dying or being injured

[@MJTechChannel]

+Junior Guerrero Its a new revolutionary product and people are experimenting with them, using them improperly.

[@scdnj]

mayiandjay I am sorry but batteries than can explode is not a problem due to using it improperly, this is a serious problem that is due to bad quality components...

[@MJTechChannel]

The battery issue has been resolved and spotted. But once something makes a bad impression its hard to fix it.

[@scdnj]

mayiandjay Yes you are right, it has been resolved but you have to buy an additional battery, and replace it yourself.

[@بشاربنغانمالراشدي]

aneed one

[@youngbloodsakura]

i liked first

[@MsTenna91]

You talk to much gett to the point

[@AmaanKh7n]

you are poor haha he only afford clones

[@xalataf3365]

He buys them so he can review them.

[@GoldSmithTutorials]

+TheRedstoneVillager he gets them for free

[@VaughnN]

Lmao they just unbranded I can buy a unbranded one, brand it and sell it for $1,000 its not that hard

[@cameroncortes1135]

+twisterxelite it's not unbranded its a swagway

[@paulwakefield6634]

Hi everyone yes I have a problem with my MiBOARD it seams that there are different names for the balance or hover board, mine is called MiBOARD . Anyway my problem seams to pose a slightly different problem to the one's experienced in the videos. I go through the re calibration as many of you have explained , so then I turn it back on i have the green battery light on indecating power ?, when applying a little pressure on the foot plate the running indecator light is green for 2 seconds and one wheel turns then stops and go's back to red light and no function, could it be low power even though the battery is showing a full block green.

[@MJTechChannel]

Hi there! It sounds like you have a faulty battery. This happens quickly after charging?

[@kimcetin766]

what

[@kimcetin766]

after I charged my hover board after I tried it twice it stopped working I need help

[@surenamiryan1141]

Paul Wakefield i have the same problem

[@rjcool0079]

Kim Cetin same