MK4 VW Jetta Heater Core Replacement!!

  Рет қаралды 42,907

Austin Niemela

Austin Niemela

Күн бұрын

Пікірлер: 87
@billocampo1365
@billocampo1365 3 жыл бұрын
You got to be the best all around mechanic and fabricator I've ever seen
@frankhoward7645
@frankhoward7645 Жыл бұрын
Excellent video. 10:31. FYI, that noise is the starter motor. It's repairable, but you have to dismantle the starter.
@Will-No-Co
@Will-No-Co 3 жыл бұрын
After seeing this I can guarantee you that is one car I would never have. What an engineering cluster. But, you rock for taking on the task!👍
@dickmiller8900
@dickmiller8900 2 жыл бұрын
It's the best car on the planet, in my opinion (TDI, that is). It's worth enduring the ridiculous proceedure required to replace the heater core. The rest of the car seems to last forever.
@Gr8thxAlot
@Gr8thxAlot Жыл бұрын
All modern vehicles are similar to this, unfortunately.
@bubbafringman1864
@bubbafringman1864 3 жыл бұрын
Back in the day, heater cores were accessible behind a couple of clips either under the dash, or under the hood. What on gods earth were the engineers smoking who thought it was a good idea to put it behind the dash so you had to tear it completely apart to get to it. Sometimes insanity prevails.
@austinniemela
@austinniemela 3 жыл бұрын
They were smoking the good stuff 🤣
@tiko4621
@tiko4621 Жыл бұрын
This is standard procedure for pretty much all modern cars.
@txmuddigger
@txmuddigger Жыл бұрын
It's not "back in the day", its depending on make and model. A 63 Fairlane is a PITA when compared to a '95 Chevy p/u. Now this Jetta, yeah they kind of suck.
@Aith516
@Aith516 Жыл бұрын
This makes me want to sell my jetta.
@HardWhereHero
@HardWhereHero Жыл бұрын
it heavily prevails. that is such a idiot design. I might be looking at this soon but on the other hand would rather sell it and buy something else.
@abpsd73
@abpsd73 3 жыл бұрын
Might be a good idea to pressure test or replace the cooling system cap, could be the system is over-pressurized and popped the heater core.
@carni6319
@carni6319 3 жыл бұрын
Me: Hey Volkswagen, I need to pay for a heater core replacement. Volkswagen: It's totaled
@richmill6043
@richmill6043 3 жыл бұрын
After watching you take the whole dash out, I believe that I would just drive the car in the summer ! Lol! Is there anything that you will not tear into?
@starrtraveler29
@starrtraveler29 3 жыл бұрын
I'm right there with you. In fact, I'd rather change the clutch again than do that little shit show just to change the dern heater core! wow, no thanks!
@Stable_Enough
@Stable_Enough 3 жыл бұрын
Thank you for this video. Fast to the point. Exactly what I needed to see.
@mmichaelc
@mmichaelc 3 жыл бұрын
This looks like a total pain to change the core. To bad you didn't show removing the heater box in real time. Great video as always.
@delusionallarry3310
@delusionallarry3310 3 жыл бұрын
Austin your the shit dont stop these videos man thanks again
@Sevalecan
@Sevalecan 2 жыл бұрын
Lol, that starter noise. I let mine go for a while and felt bad about scaring people when it'd start near them. Replaced my starter and the first one from Pure Energy had a bad solenoid, kept getting stuck on. So I sent it back, got a Bosch reman unit. That one failed in relatively short order, so warrantied it. Finally been good since. Might've been better off sticking with my original noisy starter.
@tradeMark182
@tradeMark182 3 жыл бұрын
Havnot seen the old girl in a while now , still a beast
@fourc8642
@fourc8642 3 жыл бұрын
Nice work man But I do not envy you with this job. I had that exact same Jetta TDI with the black and black leather interior. I loved that car and this was a job I thought I would have to do at some point but luckily not. Keep up the good work bro
@ironslimy7899
@ironslimy7899 21 сағат бұрын
did you have to purge the ac to do this job
@kujebrah
@kujebrah 13 күн бұрын
Thank you for the upload. Do you know if all this labor is required for a MK5 Jetta as well, or is the heater core accessible from the driver's side foot well?
@donkov5322
@donkov5322 3 жыл бұрын
Wow thats all I can say. I started watching your brother and I must say you are 2 very different people lol. Keep up the great work 👍.
@MrJeepin88
@MrJeepin88 5 ай бұрын
I think my A/C evaporator is leaking is this going to be a similar job and should replace the heater core while I’m there even though it’s not leaking
@thomasmitchell6921
@thomasmitchell6921 3 жыл бұрын
I’m tired and my fingers hurt just watching you!
@tomilaw7996
@tomilaw7996 2 жыл бұрын
Hello about the blend doors, if you fix it,can you tell me please the brand of the tape or the type and if you are satisfied???I have the same problem and i dont know what is better to use to stay longer. Thank you.
@alexburton5136
@alexburton5136 3 жыл бұрын
Putting in that airbag the way he was moved over like that … someone has some PTSD from airbags for sure 😂
@oZixn
@oZixn Жыл бұрын
What clips? I cannot find them? I'm lost and don't have a way to evacuate the AC Lines
@dmc1221
@dmc1221 Жыл бұрын
Hi there, I recently purchased the same boost gauge as yours, what way did you wire it up and where on the bulkhead/firewall did you route the pipe for boost? Cheers 👍
@sunoclockoneday2576
@sunoclockoneday2576 3 ай бұрын
About to do this on my friends 04 BEW wagon and of course there's no split box . Mines a 00 ALH so hopefully I have the split box when the time comes I don't want to do this 😫
@ejtakach
@ejtakach 3 жыл бұрын
Great job! Do you have any idea what this replacement would cost at the VW shop?
@chanyom3402
@chanyom3402 Жыл бұрын
I did the same process but now I'm getting imobilizer activated error
@joe_outside
@joe_outside 2 жыл бұрын
If I do this, approximately how many hours am I looking at? I have experience with the alh, done timing belt, clutch and fuel pump seals to name a few, so I'm not a noob, but still an amateur who will probably break a few pieces in the process.
@zombiecrow92
@zombiecrow92 3 жыл бұрын
What's your exhaust system? I want that sound on my tdi.
@marianzero3237
@marianzero3237 3 жыл бұрын
Austin, check the alternator clutch pulley. From the noise the motor makes it sounds like it's stuck.
@gadgetlp
@gadgetlp 5 ай бұрын
Maybe bearings?
@andrewesposito7573
@andrewesposito7573 3 жыл бұрын
And I thought changing the heater core on my 2001 Ram was bad,wowsers!!
@20Annaliese10
@20Annaliese10 2 жыл бұрын
If you're having trouble keeping up, you can slow down the video speed. If you're on a cell phone it should be in the top right corner of the video under settings. You'll look for playback speed and click that, then change it to the speed you want.
@The_Beautiful_People
@The_Beautiful_People 3 жыл бұрын
Austin how do you organize the parts you take off? Do you lay them out in a certain way. Great video as always!
@austinniemela
@austinniemela 3 жыл бұрын
I just throw them in the trunk and reassemble as a puzzle haha
@ftlbaby
@ftlbaby 2 жыл бұрын
@@austinniemela lol of course
@SFlores1979
@SFlores1979 2 жыл бұрын
Great job and video! Question: when you did the blend doors before, was there improvement on the amount of air coming out the desired vents? I am guessing that since the foam on the doors disappears over time, the air from the blower basically goes everywhere. So once the doors are re-foamed, is the air directed more efficiently to the vents you want air to come out of? Thanks for the video again!
@tomilaw7996
@tomilaw7996 2 жыл бұрын
Hello did you fix because i have the same problem and u don't know what to use
@SFlores1979
@SFlores1979 2 жыл бұрын
@@tomilaw7996 Yes i did. I used this other video as a guide. kzbin.info/www/bejne/pGeqeaCwp5yod6s Air is routed much better. I found that the air box behind de radio area was not installed properly from when the heater core was changed out. I used new foam tape for all the mating surfaces of the vents and the air box. On the blend doors I used HVAC tape. Use a kid or someone with smaller hands to do the door in the back of the air box. Hope this helps.
@tomilaw7996
@tomilaw7996 2 жыл бұрын
@@SFlores1979 thank you
@dallondogg
@dallondogg 12 күн бұрын
@@SFlores1979hey I’m getting ready to check out my blender doors and came across this video should I do both blender door and new heater core ? Mine is 01 beetle Tdi and no heat or ac I’m guessing I don’t have the split box and really don’t want to take my dash all the way out the car is already crumbling apart and no telling how much stuff will not go back together once it is apart lol
@SFlores1979
@SFlores1979 12 күн бұрын
@@dallondogg hello For the heater core, if it’s leaking, like there is some weird steam-like stuff coming out of the vents when you try to use the heater, then most likely it’s bad. I think yuh will still need need to remove all of it. Since you will have all of it take apart then you could do the blend doors then. It’s a process. I paid someone to do the core for me haha they did not know how much work it would be so I got lucky! The blend doors were done some time after. But I believe it may the same setup: dash needs to come out to get the core swapped :( if when you try to use the AC you get air in all vents (dash, floor, defrost) then most likely your blend doors’ foam is all gone. Have you had foam blow out of the vents when you use the fan? If so, then yeah, you could try to do the blend doors by themselves. But then the core would still need to be done.
@mikes1097
@mikes1097 3 жыл бұрын
What a PITA to change a heater core!
@masonpugh3637
@masonpugh3637 Жыл бұрын
Good video but that's a lot of work and patients wow wow I believe I'm just gonna put a coupler on the end of mine is Pipe has snapped but the heater court is intact
@eamons5870
@eamons5870 3 жыл бұрын
how does one know their heating core leaking?
@jeffkelly636
@jeffkelly636 Жыл бұрын
You'll start to smell it when your heat is on and your inside windows will start to "fog" up with residue from the leak. Worst case it will fail and there'll be hot liquid on the floor.
@draganborovnica
@draganborovnica 3 жыл бұрын
I would literally hang out that engineer who think that was a good idea to design heater core that way.
@tomswindler64
@tomswindler64 3 жыл бұрын
And he says this is lot easier than first time,ok then.👍👍😎😎
@andressalazar6015
@andressalazar6015 2 жыл бұрын
So obviously this is your second go around, but what are those few extra parts that you wish you had or wish you would’ve replaced after you put it together the first time like extra certain types of clips or gaskets cuz Jetta’s known to blow the forbidden snow. Haha
@hevicex
@hevicex 2 жыл бұрын
Nice vídeo, you problem of leak un heater core are to use a poor ir bad coolant. Use g12 vw official, this is not corrossive for aluminium pipes
@carlosbalderas7962
@carlosbalderas7962 3 жыл бұрын
I Watch your videos from Cancún. Am Very impresive with your channel Ever come to Cancún let me know man. I ll be happy to show you around.
@edmondbouchard3363
@edmondbouchard3363 2 жыл бұрын
Would want to do such job.
@gobbledgoop8350
@gobbledgoop8350 Жыл бұрын
Damn! Gonna by the dorman bypass kit now Lol.
@simplestatic
@simplestatic Жыл бұрын
Since I bought the car about 10 or so years ago, I put off doing the blend door foam. Then the ac evaporator went out about 4 years ago. Even though I live near the south coast, I put off doing the evaporator. Then finally, this winter, my heater core started leaking. Condensation on cold mornings freezing on the interior of the windshield, making it really difficult and dangerous to drive has me thinking I will just bypass the heater and wait till the summer to fix it. 😆. I really like the car. Just did the t-belt service 16k ago. But the turbo is leaking, the dmf is rattling and I could probably tighten up the front end again. Now, I'm not sure if I should fix it, or turn it into a project car and get something else.
@gobbledgoop8350
@gobbledgoop8350 Жыл бұрын
yeah my blend door foam is shooting out of my side defrosters and all last summer I couldnt drive more than 30 minutes before the inside of the windshield comepleted got covered in condensation, glad I finally did the bypass@@simplestatic
@jamieknopp300
@jamieknopp300 3 жыл бұрын
Man when I did my heater core on the old 2slow I lost my dash lights so I said forget it and just put a light in my dash
@colinchandler6516
@colinchandler6516 Жыл бұрын
thanks great video
@BRVYDEN
@BRVYDEN Жыл бұрын
Is your brother Devon ?
@jerryminor2386
@jerryminor2386 8 ай бұрын
He says well guys that wasn't too bad LOL bullshit I'm glad I drive a 94 Ford ranger XLT four-wheel drive 300,000 mi on it I've had to replace the core three times I just opened up my glove box drop it down take out four bolts take off the hoses then do it in reverse.
@nick_3771
@nick_3771 3 жыл бұрын
Support Rumble!
@johnpyle8027
@johnpyle8027 3 жыл бұрын
My dash would rattle like it was full of marbles if I did that! lol
@jd-pf2oc
@jd-pf2oc 2 жыл бұрын
All the screws and small parts. I wouldn’t be able to get it back in lol
@johnlynn4945
@johnlynn4945 3 жыл бұрын
Not too bad a job??? Holy crap, you had to tare The Whole dash apart. Wow!
@christophers.4007
@christophers.4007 3 жыл бұрын
this is the same repair on pretty much all modern cars unfortunately.
@colinchandler6516
@colinchandler6516 Жыл бұрын
can you do that to my car please
@princenoah21
@princenoah21 3 жыл бұрын
Damn. If the heater core in my truck fails, I'm not sure I WANT to take the whole damned thing apart just to fix it. :|
@Jesus-hx5vg
@Jesus-hx5vg 3 жыл бұрын
Never a fun job doing the core. Just did mine
@javiscancino
@javiscancino Жыл бұрын
I´ll guess i will have to bypass that HC, fu.. too lazy for that diy.
@robertwilliams1662
@robertwilliams1662 4 ай бұрын
Planned obsolescence !😮means Designed to fail. I would rather change a motor and transmission out on this car then to fix a heater core
@diyjeff1838
@diyjeff1838 3 жыл бұрын
German engineering!!! Screw that!! No German cars for me ever again!! Lolol.
@dBFreqs
@dBFreqs 2 жыл бұрын
Pronounced "Molly"/Meyle
@frediefarmer
@frediefarmer 3 жыл бұрын
👍🏽🇺🇸👍🏽
@maddgoatee9708
@maddgoatee9708 3 жыл бұрын
And now we know why you put it off for so long. If your going to bury something that deep in the car. The VW engineers could have made it bullet proof. Me, one day to take it apart and replace core. 10 days to remember how to get it back together.
@austinniemela
@austinniemela 3 жыл бұрын
For real!!
@eliazarfv
@eliazarfv 3 жыл бұрын
1😁
@michaelwelschmidt9338
@michaelwelschmidt9338 3 жыл бұрын
What a rats nest.
@adventurousairman
@adventurousairman 3 жыл бұрын
Yikes
How to Flush a Heater Core (Fast)
6:30
ChrisFix
Рет қаралды 10 МЛН
How to Back Flush Your Heater Core by Yourself
7:08
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,8 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
VW Heater Core Replacement,The Easy Way!
12:04
joshcb7
Рет қаралды 59 М.
Volkswagen MK4 TDI Buyer's Guide | 1998-2006
12:34
James Cooperider
Рет қаралды 180 М.
VW Jetta MK6 - Heater Core Replacement DIY
17:00
Joels Driveway
Рет қаралды 71 М.
VW BORA-GOLF 4 KALORİFER ISITMIYOR ÇÖZÜMÜ👆🏻
4:28
KESİCİİ GARAGE
Рет қаралды 71 М.
Jetta Heat And AC Fix | Blend Doors | Foam In Vents
7:04
Colton's Garage
Рет қаралды 56 М.
How To Fix Blend Doors ~ Install a Heater Core and Reseal The HVAC Box
19:51
How to SUPER FLUSH your Cars Cooling System
22:07
ChrisFix
Рет қаралды 17 МЛН
Avoid Heater Core Replacement: Simple Jeep Wrangler Heater Fix!
13:08
Thrill of the Grille
Рет қаралды 10 М.