MK900 multi channel cloner program

This video shows how to program Magickey MK900 to different brand remotes with different frequencies different codes. Up to 4 channel into one single remote includes fixing codes and rolling codes.
Rolling codes include ATA PTX4, B&D 433MHZ, MERLIN+, MERLIN+2.0, FAAC, Ditec, CAM, Liftmaster, Forza, Fadini, Marantec, Easylift and many more.
After clone MK900 may need program into individual drive devices. But it’s simple just like original remote program process.

[@henriquemacau4673]

Hi, Does it works with roller code remotes? Mine as a blue Led and it does not work after copy.

[@oliverlee4441]

Good Job Dad

[@kkomarica810]

can you tell me what is the procedure to reprogram only one button on the universal remote? I would like to delete only one button, and on this button I would like to program a different remote (different doors). thanks!

[@richardmutingondo6952]

Helo lm looking for one how can l get it please

[@kgm9595]

Hi, could you let me know where I can buy the remote duplicator that shown on your youtube? I appreciated for your help. Thx

[@kuskus3127]

aliexpress

[@kniffeine]

Amazon.

[@andy4405]

mine doesn't go into "flashing" .. its new.

[@kevingove49]

Hi Andy, Did you solve this problem, I have just bought a new one with the same issue? Thanks

[@peterduyts4443]

@@kevingove49 I figured it out for mine : Mine has a blue LED, not the red one. About 90% of these remote cloners ( various brands, shapes and colors) use the hold1-press2 4 times method to copy. This one uses another method :) Step 1 : First you have to clear the whole thing : Press and hold button 1 and 2 ( the upper ones ) together until the led flashes a couple of times. Release button 2 ( keep button 1 pressed) and press button 2 3 times. The LED wil flash a couple of times to acknowledge that the memory has been cleared. Step 2 : Program the buttons : There is no need to put the remote into a special program mode. Empty buttons will be in program mode per default. Press and hold the button on the original remote , at the same time press and hold the button you want to program on the new remote . The LED wil flash 2 times, then go back out for a second and then flashes 5 times. Now that button is programmed. You can now program the other buttons using step 2 again. Buttons which are already programmed cannot be reprogrammed until you clear the whole memory ( see step 1 ) It took me a couple of days to figure out how this worked. In most cases , this will suffice. With the other remotes ( like the one in the video ) you can reprogram individual buttons, this remote does not support that. If you want to change 1 button, you have to clear and reprogram the whole thing.

[@kevingove49]

@@peterduyts4443 Hi Peter, Thanks very much fir your help with this. It definitely seems to work with this key. I think I have to do something at the gate also to get it to recognise the new key, I am going to do that now.

[@Jesuslikesgoatrance]

Thanks man! Gonna try it! God Bless!

[@MeTz4U]

@@peterduyts4443 had the same issue, was glad you comented! Thanks for the vid maker and comment section! Cheers!

[@user-kz7qm2dq9q]

Mines go into the flash mode but once I press a primary button to use as my open button it still doesn’t open the garage

[@kniffeine]

Follow the instructions again it won’t open it till it’s programmed.

[@firmbutton6485]

I bought two and neither do the slow flash

[@kevingove49]

Hi Did you solve this problem, I have just bought a new one with the same issue? Thanks

[@peterduyts4443]

@@kevingove49 I figured it out for mine : Mine has a blue LED, not the red one. About 90% of these remote cloners ( various brands, shapes and colors) use the hold1-press2 4 times method to copy. This one uses another method :) Step 1 : First you have to clear the whole thing : Press and hold button 1 and 2 ( the upper ones ) together until the led flashes a couple of times. Release button 2 ( keep button 1 pressed) and press button 2 3 times. The LED wil flash a couple of times to acknowledge that the memory has been cleared. Step 2 : Program the buttons : There is no need to put the remote into a special program mode. Empty buttons will be in program mode per default. Press and hold the button on the original remote , at the same time press and hold the button you want to program on the new remote . The LED wil flash 2 times, then go back out for a second and then flashes 5 times. Now that button is programmed. You can now program the other buttons using step 2 again. Buttons which are already programmed cannot be reprogrammed until you clear the whole memory ( see step 1 ) It took me a couple of days to figure out how this worked. In most cases , this will suffice. With the other remotes ( like the one in the video ) you can reprogram individual buttons, this remote does not support that. If you want to change 1 button, you have to clear and reprogram the whole thing.

[@TonyaHicks-i1t]

Davis Jennifer Allen Eric Lopez Susan