NEW Tilt Relative to Surface in Unified Multiaxis - What's New Mastercam 2023

The unification is complete! Unified Multiaxis now replaces four separate toolpaths. It also adds a new feature to tilt the tool along a drive surface for more efficient machine movement with a consistent stepover amount.
Try it out on your files or download our example 2023 Multiaxis Tutorial files
www.mlc-cad.com/mastercam-eve...
‪@mastercam‬ 2023 #Multiaxis

[@policebox1092]

Thanks for sharing

[@MLCCADSystems]

Thanks for watching!

[@TECHIE_VLOGGER]

Hello sir u have explained beautifully for solid works API vedio can u make similar vedio for solid edge API

[@MLCCADSystems]

I'm sorry, but we only support SOLIDWORKS products for CAD. Good luck in your search.

[@joaopffg]

Nice video. I have one question though. I have imported a STL model from a 3d scan and i can't use the mesh as the machining geometry. Mastercam wont let me select the model. What am i doing wrong? Am i supposed to convert the mesh into a solid or surface?

[@MLCCADSystems]

You will be able to select the STL as a drive surface when using Guide or Automatic as a cut pattern. If wanting to use another cut pattern create a simplified surface in the area you would like to machine and use the STL/Mesh as an avoidance as in a Clean Core technique. I hope that helps!!

[@hikmatjan54]

How to install another controller in Mastercam please

[@MLCCADSystems]

Can you elaborate on what you need? If you already have the controller you should be able to copy it to your directories like this article: www.mlc-cad.com/easy-guide-install-mastercam-post-processor/

[@7hillscreations584]

Sir how to make that solid idol

[@MLCCADSystems]

Creating the geometry would require a different tool. Depending on the type of geometry it may need to be CAD software, free-form modeling, or a scan import from a scanner.

[@7hillscreations584]

@@MLCCADSystems can you please tell me how in mastercam

[@MLCCADSystems]

The model was imported from another program, it was not generated inside Mastercam. If this is the result of a scan from an existing sculpture, you can get an idea of how that is done here: kzbin.info/www/bejne/eqGkf5x6jcaeqpo