This is proof a skilled craftsman can turn an, “ok”, kit into a masterpiece. I hope to have your level of skill someday.
@MMScaleModels3 жыл бұрын
Thanks Bruce, all it takes is practice and challenge IMO
@jaidenvicente72003 жыл бұрын
Instablaster
@raymadani2702 жыл бұрын
academy is less than ok
@fishnchips58264 ай бұрын
@@raymadani270have you tried their newer kit like the strike eagle, super hornet/growler and tomcat/bombcat? Those things were a breeze to build. My only complaints are they dont give us many option, like the f-15 and f-18 has a one piece canopy and non poseable elevator
@Planehazza3 жыл бұрын
Glossing and sanding decals is scary at first but is one of the most rewarding steps to model making.
@MMScaleModels3 жыл бұрын
Indeed!
@jhonathanbarthomelewoswald19363 жыл бұрын
do I have to topcoat the decals first?
@mikeylikesit33933 жыл бұрын
@@jhonathanbarthomelewoswald1936 yes! So apply a clear over the decals before sanding down
@markgrant54623 жыл бұрын
The level you are taking your builds to is excellent. So much detail
@MMScaleModels3 жыл бұрын
Thank you very much!
@rickbourn9713 жыл бұрын
Wow! That looked like a LOT of work! It turned out great. Liked the idea of stippling the panel line wash for some tonal variation. Thanks for sharing the build with us! Love your humor too. 👏🏻👏🏻
@MMScaleModels3 жыл бұрын
Thanks Rick, there was reasonable amount of work involved. If it was not for the resin exhaust the build would be easier.
@paulfrantizek1022 жыл бұрын
Great build. Spraying the grey over the metallic tones was a fantastic choice.
@MMScaleModels2 жыл бұрын
In my case the result was not what I aimed for, but have seen this approach working very well
@patrickhayden503120 күн бұрын
Outstanding paint! I’ll be starting my own build shortly and found the information and advice very helpful!
@MMScaleModels15 күн бұрын
It did not turn out as I wanted it to but still... I like it. Just could not get the have glass
@texmurphy5611 Жыл бұрын
I’m not going to be the first - or last person - to say this, but THANK YOU for sharing your wisdom with us! You are one of the reasons why my skills have improved the past year! Just when I thought I knew enough to be “good” with painting, you throw in something new like the Have Glass effect! You are just brilliant!
@MMScaleModels Жыл бұрын
Well that's just about the best thing I can read, thanks! I have to admit this was not the effect I was after but sometimes experiments are not successful.
@b-radfrommalibu11 ай бұрын
You did an absolutely beautiful job painting that model. I thought the camo pattern was way too dark initially but it looks excellent when finished. I will use some of your methods for sure. Thank you for taking the time to share.
@MMScaleModels9 ай бұрын
Thanks mate!
@robbo10683 жыл бұрын
Well, Metodi.....what can I say.......brilliant job and a super video to watch. You packed so much into this model (at 1/72 scale) and gave us viewers lots of detail in both visual and commentary. The wait was worth every second....check you out on the next one.
@MMScaleModels3 жыл бұрын
Thanks Robbo, appreciated mate
@jeff72_3 жыл бұрын
Lovely build, the washes really made those surface details pop 👍
@MMScaleModels3 жыл бұрын
Thank you! Cheers!
@eugenesolyanov35156 ай бұрын
Great build, I already build one F22A from Academy and this video onspired me to make another atempt.
@MMScaleModels6 ай бұрын
Its a nice kit to build for sure
@hassanali22083 жыл бұрын
i got this same kit i’m definitely going to try some of the things you did on your kit because it looks amazing
@MMScaleModels3 жыл бұрын
Thanks Hunter 👍
@jssmith19702 жыл бұрын
Amazing job! Such a steady hand and eye for detail, especially with the color selection and techniques on application.
@MMScaleModels2 жыл бұрын
Thank you! Cheers!
@jameshendershott21706 ай бұрын
wow. incredible patience, always bringing it to perfection.
@MMScaleModels6 ай бұрын
Thank you!
@nepoleanitanburger9070 Жыл бұрын
Best F-22 model build I have seen.
@MMScaleModels Жыл бұрын
Thank you very much 👍
@chartreux86733 жыл бұрын
You're making a tough kit very beautifully
@MMScaleModels3 жыл бұрын
Thanks mate, the kit is actually quite good IMO
@tonyperez47913 жыл бұрын
Great build ! Have to get one of them ! Hope you and your family have a great/safe weekend, Tony
@MMScaleModels3 жыл бұрын
Thanks Tony, you too 👍
@florinfarcas40048 ай бұрын
I love it im cant stop waching these videos and building models by myself!😊
@MMScaleModels8 ай бұрын
Thanks mate!
@Harryjmacneil2 жыл бұрын
I’m learning so much Metodi! ♥️
@MMScaleModels2 жыл бұрын
Happy to hear that Harry! Thanks
@tier1detailcompany Жыл бұрын
This turned out amazing
@MMScaleModels Жыл бұрын
Thanks mate 👍
@cessnafly98416 ай бұрын
Another great model by another great artist!!
@MMScaleModels6 ай бұрын
Thanks mate 👍
@GetYourModelOn3 жыл бұрын
That is the best build of the F-22 model kit I have ever seen, very good work!
@MMScaleModels3 жыл бұрын
Thanks mate, appreciated 👍
@Slingshot_IL3 жыл бұрын
Love your builds. I’ve learned a lot.
@MMScaleModels3 жыл бұрын
Great, thanks mate 👍
@suryasamaranku Жыл бұрын
Your colored detail was awesome!!!
@MMScaleModels Жыл бұрын
Thanks 👍
@The_Modeling_Underdog3 жыл бұрын
Welcome back, Metodi. A great build, indeed.
@MMScaleModels3 жыл бұрын
Thanks a lot mate 👍
@anotheruser98763 жыл бұрын
Welcome back. Missed your content. Hope everything is fine with you.
@MMScaleModels3 жыл бұрын
Thanks, all is ok... decided that in 2021 I'll take my time to do things "right"
@hathaway39793 жыл бұрын
amazing work. i will use this video for inspiration for one of my f-22 builds.
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@Maxtherocketguy Жыл бұрын
For the shine,you can use more metallic paints and less gray when painting
@gigr18633 жыл бұрын
Great kob! I just would have made the dark grey patches a bit more visible, but I do love it. Time to draw my 2009 Revell kit from the stash and assemble it!
@MMScaleModels3 жыл бұрын
I agree, but it is hard to judge how the next paint layers will do covering the camo.
@jrk0983 жыл бұрын
I'm not impressed with the revell kit, but i am a beginner so maybe thats why i had such trouble with it
@m21smt3 жыл бұрын
Ohhhh wowwww excellent work muy friend. Thanks for your vídeo, greats from Argentina.
@MMScaleModels3 жыл бұрын
Thank you very much!
@Quadrant142 жыл бұрын
Great work, I see now some companies have bought out a Have Glass paint set. Nice work on the tail and exhaust area. and pencil work, This has given me a lot of inspiration to have a go at my Raptor sitting in a box downstairs stored away, thanks mate
@MMScaleModels2 жыл бұрын
Cool, thanks!
@danvasilescu88103 жыл бұрын
Very nice build, although I would have used black basing at the beginning to give the have glass paint more depth. I would love to see in the future a Su-25 build in БВВС colors 😊. All the best from Bucharest!
@MMScaleModels3 жыл бұрын
Thanks, at the end it did not show trough that black base or not to matter.
@sirira3 жыл бұрын
That's a beautiful plane. Great job!!
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@lucianodeltorchio19123 жыл бұрын
Thank you for inspiration and teaching. Keep safe. Ciao
@MMScaleModels3 жыл бұрын
Thanks for taking the time to leave a comment 👍
@dongorski48223 жыл бұрын
Superb work as always Metodi!
@MMScaleModels3 жыл бұрын
Many thanks!
@zack-xb9po2 жыл бұрын
I just got one I'm not good at painting so I don't know how it will turn out but I hope it looks all right since it's my first
@MMScaleModels2 жыл бұрын
Practice makes perfect right :)
@LRRPFco522 жыл бұрын
That started out scary with the putty, but you really pulled it all together towards the latter half of the build. The detail looks more like a pro 1/48th scale, so you nailed it in many ways. Things I might have done different would be filing down the edges of the AIM-9X missile fins to get rid of the blocky execution of the molds, but that’s hard to do on 1/72. I just got 2 Revell 1/72 F-22s, and I want to focus on the weapons bays more than anything as part of a bigger project. I like your weapons bay detailing on this. I’m looking at close-up photos of real F-22A weapons bays to try to nail the details. Overall great job man.
@MMScaleModels2 жыл бұрын
Thanks mate, TBH I am not very happy how the paint turned out as I really had something different in my mind but stuff like that happens.
@lesthiele49213 жыл бұрын
Hi Metodi, that was a fantastic job, well done, what's next on the modelling desk? I hope you and your family are keeping safe and well happy modelling mate.
@MMScaleModels3 жыл бұрын
Thanks Les, long term ICM 1/48 invader, have to figure out something for the short-term 😀
@wallylawrence3 жыл бұрын
you Sir are an artist
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@calegarieliton3 жыл бұрын
now i will write in portuguese. Esse vídeo é muito bom, forte like, o melhor canal do KZbin sem dúvidas. Um grande abraço amigo.
@MMScaleModels3 жыл бұрын
Problem is... i don't know Portuguese 😀
@calegarieliton3 жыл бұрын
I said this is the best KZbin channel, and a big hug, I always learn a lot from the channel ..
@MMScaleModels3 жыл бұрын
Thanks mate 👍 appreciated
@garygenerous89823 жыл бұрын
Amazing work as always Metodi. Thanks for sharing :)
@MMScaleModels3 жыл бұрын
Thank you! Cheers!
@avionx84713 жыл бұрын
I think a little interesting thing you could possibly add to the gear is sanding down underneath the tires just a little bit to add the weight effect on account of the aim 9s, AMRAMs, and the two external fuel tanks.
@MMScaleModels3 жыл бұрын
Yup, you are right. Properly weighted tires are a cool little feature.
@andresmunozolvera65193 жыл бұрын
Gracias por el video muy interesante y ponerle títulos en español!!!! Saludos desde México
@MMScaleModels3 жыл бұрын
Thanks for watching mate!
@SprueFascinationChannel3 жыл бұрын
Excellent job, Metodi 👍
@MMScaleModels3 жыл бұрын
Many thanks!
@foreverplastickits1383 жыл бұрын
*Wonderful at this scale, your Raptor is beautiful!*
@MMScaleModels3 жыл бұрын
Thanks mate
@zer49902 жыл бұрын
Is it the same model as the Academy Raptor I bought;;;;;;;? The quality is so good. Great job 😎👍
@MMScaleModels2 жыл бұрын
This is academy too so it is very possible to be the same kit
@KyleSchwanz2 жыл бұрын
Looks incredible!!!
@MMScaleModels2 жыл бұрын
Thanks mate 👍
@fleetwarrior753 жыл бұрын
Outstanding work!
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@briansonnenfelt71253 жыл бұрын
AK makes a Have Glass paint. It’s decent has some metallic sheen to it. I used it on my 1/48 Hasegawa Raptor
@MMScaleModels3 жыл бұрын
Thanks for the tip Brian, I prefer lacquer paints so my next attempt will be MRP or Hataka.
@josecesar59523 жыл бұрын
Gorgeous work!
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@eavesdropss2 жыл бұрын
you are god of modeling
@MMScaleModels2 жыл бұрын
Thanks mate :)
@eduardobrettas17453 жыл бұрын
Great job and always good tips!
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@Mr_Finess32 жыл бұрын
Excellent work.
@MMScaleModels2 жыл бұрын
Thanks mate 👍
@jeroenk3570 Жыл бұрын
Nice job. I just bought the same kit with the same Aires upgrade sets. Is there a reason why you didn't use the Aires resin canopy base? I haven't received my kits yet and I couldn't find any user manual on line. I am a bit worried about the fitment now.
@MMScaleModels Жыл бұрын
Unfortunately you have every reason to be worried about the fit. I struggled a lot especially with the engines. For the same reason I ditched the canopy frame. I am not excluding user error from the equation but.... nah it just does not fit.
@jeroenk3570 Жыл бұрын
@@MMScaleModels Thanks for the heads-up, I will adjust my expectations.
@NazaModelArtScaleModelsZone3 жыл бұрын
Love your techniques and tricks Sir 👍
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@andrebastos56353 жыл бұрын
Great job sir 🙏
@MMScaleModels3 жыл бұрын
Thanks Andre 👍
@scalemodelingltd3 жыл бұрын
This is really nice work. Well done. x
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@mphirani34033 жыл бұрын
you are great artist.
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@brianc17013 жыл бұрын
Masterful work, as always. Hope you're pleased with the results. Hard to tell from the video, but it looks like most of the metallic underpainting for the Have Glass got covered over, Does it show through on the kit in real life?
@MMScaleModels3 жыл бұрын
Thanks, unfortunately it is visible only wen sunlight hits it in a certain way... i.e. not visible. More experimenting is necessary... probably other paints too.
@neilhaas60243 жыл бұрын
Nice jet besides the symphony 22 the philosopher by Franz Joseph Haydn. Nice f-22 raptor jet
@MMScaleModels3 жыл бұрын
Thanks mate!
@ScaleModelIncLIVE3 жыл бұрын
outstanding as always. great job
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@charlescampbellii81933 жыл бұрын
Looks awesome
@MMScaleModels3 жыл бұрын
Thanks mate👍
@danialhaziq4162 Жыл бұрын
Amazing work❤
@MMScaleModels Жыл бұрын
Thank you! Cheers!
@Coudy_the_Cat11 ай бұрын
Beautiful
@MMScaleModels10 ай бұрын
Thanks mate!
@AirbrusherStudio3 жыл бұрын
well done my friend !
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@allgood67602 жыл бұрын
Awesome! .. I have an F22 flight simulator for PC.. thanks👍✈️
@MMScaleModels2 жыл бұрын
Have fun!
@AlexandrMI-3 жыл бұрын
Лампы какой цветовой температуры вы используете? Выглядит очень хорошо, как днём.
@MMScaleModels3 жыл бұрын
I use two Philips Tornado Spiral 23W 865 Cool Daylight
@AlexandrMI-3 жыл бұрын
@@MMScaleModels Цветовая температура 6500 ????? Не слишком бело-синий?
@MMScaleModels3 жыл бұрын
It mixes with natural light, i have large windows around.
@AlexandrMI-3 жыл бұрын
@@MMScaleModels Ну вам очень хорошо. Я к сожалению могу только ночью уделить время хобби. Завидую вам.
@KIYOKOJI002 жыл бұрын
It was awesome sir nice work
@MMScaleModels2 жыл бұрын
Thanks mate 👍
@raymadani2702 жыл бұрын
great job
@MMScaleModels2 жыл бұрын
Thanks mate 👍
@sangjunpark84183 жыл бұрын
Very good job. Dude
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@thundervoj97412 жыл бұрын
Skvělé video
@MMScaleModels2 жыл бұрын
Thanks mate!
@OgrabliatorKorovanov11 ай бұрын
32:14 do you use cyanoacrylate or regular model glue to glue pre-painted parts?
@MMScaleModels11 ай бұрын
In this case CA
@weablewabble Жыл бұрын
Nice Job!!!
@MMScaleModels Жыл бұрын
Thanks mate 👍
@stasiu.5710 ай бұрын
Hej! Jak polecasz malowac taki model pedzlem? Jakie farby? Jak zaczac malować? Myslalem nad najpierw jasna potem ciemna i w pewnych miejscach nie malować zeby powstaly plamy z kamuflażu
@MMScaleModels10 ай бұрын
Well I would not recommend brush painting a whole model at all but if you must AK's 3rd gen acrylics are very nice to paint with. Probably ot os best to start with the lightest color and go from there.
@stasiu.5710 ай бұрын
@@MMScaleModels Muszę malować, aerograf będę miał w przeciągu 2 miesięcy, czekać na niego?
@Doglover123-b8d3 жыл бұрын
Concerning my airbrush, do I have to put thinner in all my colors. It seems that when I do put thinners in my paint all it does is make it watery and not stick well.
@MMScaleModels3 жыл бұрын
That depends on: the nozzle size, the paint, the pressure and how much you pull the trigger. With all possible combinations you'll have to find the sweet spot for your setup. I personally shoot trough 0.2 and 0.3 nozzles and I thin my paints quite a lot. But some paints are thinner than others to begin with.
@Doglover123-b8d3 жыл бұрын
Thx for the reply. I’ll give that some thought and see what works for me.
@patrick-kk6wz5 ай бұрын
13:48 bro stuffed something up with the airbrush and went "oh s**t"
@giorgiomorato38325 ай бұрын
What did you use for the panel lines and what do you use to remove the excess panel lines?
@MMScaleModels5 ай бұрын
Tamiya black panel line accent color and white spirit
@MeaProcerDiligo3 жыл бұрын
I once try to build modelos with gloves like that. They are very uncomfortable. Is there a practical reason to use them?
@MMScaleModels3 жыл бұрын
Not to leave fingerprints mainly
@stephanecaille28173 жыл бұрын
Hello everybody. 4'30: What's the ratio between White, Grey and yellow paints to do the Insigna White paint? I use tamiya acrylics paints. Thanks from France
@MMScaleModels3 жыл бұрын
The insignia white is a Tamiya color -www.amazon.com/Tamiya-Lacquer-Paints-Insignia-Bottle/dp/B07RC9CLGZ Other wise the mix i made is not as good and there is no ratio... i mixed the paints u till the result was satisfactory.
@stephanecaille28173 жыл бұрын
@@MMScaleModels thanks for your answer.
@mraviatorboii25103 жыл бұрын
Can you have the option to display it with the weapons bay closed ??
@MMScaleModels3 жыл бұрын
Yes there are separate details to pose the bays in closed position but few tabs have to be cut off.
@trekmanmo85512 ай бұрын
Good work
@michaeldublg2 жыл бұрын
Very cool
@MMScaleModels2 жыл бұрын
Thanks mate 👍
@danielezanoni80673 жыл бұрын
How long did you take to build it?
@MMScaleModels3 жыл бұрын
3 months, but I have lots of video editing to do which eats bench time.
@eugenesolyanov3515 Жыл бұрын
I am wondering, how you did intake covers. They are not part of a kit and that step is missing in the video
@MMScaleModels Жыл бұрын
Two part epoxy putty. I don't have footage for that :)
@jm_lamp6998 Жыл бұрын
10/10
@MMScaleModels Жыл бұрын
Thanks mate!
@perikliskourakos0911 ай бұрын
What glue did you use?
@MMScaleModels11 ай бұрын
I use variety of glues. Plastic clement, CA glue and white glue are my choices depending on the situation
@luizaugustodasilvajunior61593 жыл бұрын
Wonderful job. I loves!!! Showww... 🙏🏼👏👏👏🙏🏼🇧🇷🇧🇷🇧🇷
@MMScaleModels3 жыл бұрын
Thanks mate 👍
@Maxtherocketguy Жыл бұрын
How did you brush so thin
@MMScaleModels Жыл бұрын
0.2 nozzle, low pressure, thin paint
@Rotaks2 жыл бұрын
Will someone ever do this model with canon bay opened?
@MMScaleModels2 жыл бұрын
Who knows :)
@AlexandrMI-3 жыл бұрын
Смывки А.МИГ очень нравятся. Можно убрать сухой ватной палочкой хоть через неделю. Тамия этого не позволит. Её надо убрать желательно в первые 15 минут. Дольше труднее.
@MMScaleModels3 жыл бұрын
True, however this can be a disadvantage sometimes
@Maxtherocketguy Жыл бұрын
17:28 how did you paint so thin
@MMScaleModels Жыл бұрын
0.2 nozzle, very diluted paint and low pressure.... and some experience ;)
@perikliskourakos0911 ай бұрын
Can i use other glues
@AviationGuy16227 ай бұрын
The masking and airbrush sound 🤭🤭
@MMScaleModels6 ай бұрын
😊
@samypons90232 жыл бұрын
nice
@MMScaleModels2 жыл бұрын
👍
@memphiswayne8503 Жыл бұрын
I'm building this aircraft but I wanted to replicate the raptor sheen
@MMScaleModels Жыл бұрын
I was not able to do that although I tried, next time I will try MRP's have glass.
@davidkey26043 жыл бұрын
I’m first! This is on my wishlist, but Navy or Marine version.
@MMScaleModels3 жыл бұрын
Unfortunately they don't come in such :)
@fleetwarrior753 жыл бұрын
I think you’re thinking of the F-35!
@davidkey26043 жыл бұрын
@@fleetwarrior75 yep, I had F35 on my mind.
@davidkey26043 жыл бұрын
@@MMScaleModels you’re right I was thinking F35
@eggzoticsoda6 ай бұрын
Do I have to glue it?
@MMScaleModels6 ай бұрын
Glue what?
@cesarorozco8902 ай бұрын
I want it
@robertjensen10943 жыл бұрын
Just a comment for the algorithm.
@MMScaleModels3 жыл бұрын
Just a thanks 🙂
@jasonshink65893 жыл бұрын
My man did hours and hours if masking for not alot of reason. Painted over all it with ghost gray