Love the video, although it's had an awful effect on my bank balance lol One thing I would say is don't feel the need to apologise about the affiliate links, you make good videos and deserve a bit of support to keep making them. Keep up the good work mate.
@RunThatRC5 жыл бұрын
Thanks for the support!
@bugsy7424 жыл бұрын
Here here man 👍😎🤙🙏
@YoShImUrA533 жыл бұрын
Hey David, been researching through your videos about MN D90s and its variants, and never caught my eye that you have side windows on your light green rig where no MN is sold like this, as you point in this vid. How did you find those? Did you custom make them? Have you ever explained how in a vid? I'd love to get this car, but the need for committing to a total build, both in upgrading performance as well as dressing it up to make it look more scale, is as challenging as is off putting in some regards like making these windows. TIA and great content as ever, dude!
@Hjerte_Verke2 жыл бұрын
Thought I'd answer this even though I'm a year late. Clear windows are easy to add with clear plastic cut to size. Use clear acrylic sheet, clear styrene, or plastic from a "blister" product package. Another good source for plastic is to use a clear CD 'jewel' case. The clear plastic of a CD case is optical quality without distortion.
@YoShImUrA532 жыл бұрын
@@Hjerte_Verke thanks!!👌🏻
@bolsheflix66873 жыл бұрын
love this channel
@RunThatRC3 жыл бұрын
thanks for the support!
@IDBUZZ_RC_DIY2 жыл бұрын
I love that lighting!! But tires are too big for the car. I hope it little bit smaller.
@RunThatRC2 жыл бұрын
the WPL tires make it look more scale.
@christopherantonio34533 жыл бұрын
I've got a problem my Mn99s is blinking. My stock remote blinking too. It's look its not bind. How to fix it? Thanks
@RunThatRC3 жыл бұрын
it may have went bad but I haven't had that issue so I dont know how to rebind these unfortunately.
@br1ann885 жыл бұрын
Probably the best crawler to upgrade under $60 !!! From gearbest/banggood Imo cause the really nice look I might get one in a couple of months lol
@chrisgray4603Ай бұрын
Sorry dude that is a reg mn99, not the s, new tires axel mounted servo
@slyztercoreveanged31753 жыл бұрын
Even RC car know tu use signal blink during turn and some human doesnt know how to do that
@RunThatRC3 жыл бұрын
that's so true hahaha
@christopherantonio34533 жыл бұрын
I've just bought austar transmitter. Where should i connect the lightings wire of my MN 99s to receiver? Thanks.
@RunThatRC3 жыл бұрын
the mn99s lights won't work with it unfortunately. You would need to buy a light controller and lights or rewire the whole light system it came with to work with a light controller.
@christopherantonio34533 жыл бұрын
@@RunThatRC Thanks a lot
@fernandomartin624 Жыл бұрын
I need to buy the connections from the transmission to the axles those plastic things are so weak where can I buy them?
@RunThatRC Жыл бұрын
you can get metal driveshafts for them. The WPL ones fit these as well. You can search ebay and amazon and even the Official WPL site. www.wpl-rc.com/?ref=DAVIDCLARK
@fernandomartin624 Жыл бұрын
@@RunThatRC I looked all over and they don't have parts for the 1/12jeep willy's but thanks so much tmfor the link.
@taze-11063 жыл бұрын
My charger just keeps flashing green and red, what does it mean?
@acidicmars67375 жыл бұрын
Another great video man.
@monchito77775 жыл бұрын
Awesome video its a great looking mn99 lights on this is great also and yes would have been good if they kept the headlights on a separate switch on the remote or keep them on..
@RunThatRC5 жыл бұрын
Would have been nice to see that function.
@Hjerte_Verke2 жыл бұрын
There are people who have hacked the PC board of an MN99S so they headlights stay on. Check youtube for one or more videos on the subject.
@kenryu3643 жыл бұрын
My d90 when I pull down on the accelerator all it does is flash the headlights. Anyone know what peice needs to be replaced?
@RunThatRC3 жыл бұрын
check your battery to make sure its charged and all the connections arent loose to esc or motor. May have a disconnect somewhere or if not it may be a bad esc receiver.
@kokhowe5 жыл бұрын
Personally, I think the additions of the turning and reverse lights is a good upgrade, but its a pity that it doesn't come with engine sound like the new control board offered by WPL.
@RunThatRC5 жыл бұрын
WPLs sound kit/esc receiver combo is in a whole different league. Wish they at least gave a way to control the lights through the transmitter instead of the same old transmitter. You don't use your turn signals on a crawl course/trail lol.
@kokhowe5 жыл бұрын
@@RunThatRC Agree with what you say. As much as I appreciate the MN improvements, I just feel that they are all pretty half-hearted.
@modelnutty65035 жыл бұрын
they're all getting better, newer C-14/24 kits have metal axle gears and the tan colored (lower ratio) B-36 gearbox with 180 motor. pop in 2 metal drive shafts and they're pretty solid.
@zanthraxnl2 жыл бұрын
Different strokes for different folks. Engine sound modules are why I bring earplugs on the trails.
@josiahgreen36883 жыл бұрын
I noticed that the shocks in the old mn models are a lot stiffer than the shocks in these new mn 99s models
@RunThatRC3 жыл бұрын
I think they are as well. The new ones seem to make the suspension system work better.
@aerialcombat5 жыл бұрын
I got the first release of this, it only has 2 headlights and is white. Wishing I could have known and waited for this one
@RunThatRC5 жыл бұрын
You don't need to worry if you want this light kit the link is in the description. If you have wiring experience and soldering then you can get the wpl sound kit v2 and buy some LEDs and you will have a way better light kit with sound and the ability to use the wpl transmitter to control the sound and lights. If you have a mn96 or mn99 the kit in that link will be plug and play for those.
@aerialcombat5 жыл бұрын
@@RunThatRC cool, not really interested in the sound but I'll check out the link, thank you!
@modelnutty65035 жыл бұрын
old ear bud headphone wire, some 1/8W 470 ohm resistors and some colored LED's is cheap/easy to come up with for all the marker/running lights, reverse light LED's get wired to the motor leads with any little 2 pin connector.
@aerialcombat5 жыл бұрын
@@modelnutty6503 wire the reverse lights in reverse polarity?
@NangTamKienThuc20234 жыл бұрын
This is my first RC toy, it's funny.
@jaxoezy5 жыл бұрын
Aahh dammit I ordered the mn d99 yesterday 😭 Still happy with it, but the blimpers are a nice edition, and I like this color more
@RunThatRC5 жыл бұрын
Check the link in description for the light kit that will be plug and play on the mn99.
@jaxoezy5 жыл бұрын
@@RunThatRC thanks, didn't see that! I will order them after the mn d90 is deliverd
@Valdo15012 ай бұрын
Do you know if you can put an engine sound module on the MN99s 1/12?
@RunThatRC2 ай бұрын
you definitely can. Some of the light kits for 10th scales are small enough, specially the all in one units. I know they make sound kits for the little orlandoos those might work for you. You will need to be running standalone electronics. I dont think you can make it work with stock electronics because it need the signal from the receiver to know the throttle inputs for the right sounds.
@Valdo15012 ай бұрын
@@RunThatRC Thank you very much. I really appreciate your channel.
@DoubleDownDBo2 жыл бұрын
I owned the mn99s for a long time and in 2022 I purchased 2 more and the 2022 version came with a different color 260 motor that was definitely stronger and it has the official green land rover emblem on the grill and says land rover on the hood. They also must have changed the electronics because the little headlights still light up but the big headlights stay on all the time too. Different colored wires underneath and different colored on/off switch.
@RunThatRC2 жыл бұрын
nice! Thanks for the info.
@christopherantonio34533 жыл бұрын
What brushless motor can you recommend on my MN99S? 2430-8200KV or 2435-6100KV? I want to make it faster. 😂
@RunThatRC3 жыл бұрын
I don't recommend making these fast. They really are meant to be scale trail trucks and will probably fall apart. Im using a 370 size 4500kv bl motor with castle mamba25 esc(discontinued esc)
@christopherantonio34533 жыл бұрын
Can i use my stock remote transmitter with a 25a esc?
@HunterTravels Жыл бұрын
Thanks for this video! I tried to use the code it didn’t work but I think I was able to use your clink link so hopefully you get some kickback.
@HunterTravels Жыл бұрын
I wanted this one as a starter then I might bump up to the Traxxas version.
@RunThatRC Жыл бұрын
you wont be disappointed. Once you figure what you need to modify it to your liking its a decent trail truck. It is also great to learn all the hobby tricks then all the name brand stuff will be cake to work on.
@ianmangham45704 жыл бұрын
Only £40 on eBay UK
@islandboirc63985 жыл бұрын
Dude I’m saving to get that mn model oooo ur videos help me so much dude
@RunThatRC5 жыл бұрын
Mn model is like dj Khalid. Another one! Hahaha. Just playin. They are sweet rigs and the newer ones are a good purchase over the original mn D90.
@islandboirc63985 жыл бұрын
Lol u a foo
@modelnutty65035 жыл бұрын
my D90 the older original, eBay shopping: 9 bucks for front+rear axles with metal bevel gears, 6.50 for two brass bevel pinions (axle inputs), 6.50 for two metal drive shafts, 5 bucks for a 260 motor+gearbox. 27 bucks total. it got oil shocks that arrived the day before the kit did, so it's never had a run on the stock ones. I like the look and performance of the Fayee 6 spoke rims+tires on it (5 bucks for 4), slightly smaller diameter, about 7/16" total wider track, and square face tread to make the most of the little extra width. they'd look great on the silver/black! 2 full wraps (16 turns) 2 mm solder to the front rims for climbing.
@RunThatRC5 жыл бұрын
@@islandboirc6398 hahaha
@christopherantonio34533 жыл бұрын
My MN99S is so bouncy. Whats the best suspension for upgrade?
@RunThatRC3 жыл бұрын
I actually just run the stock. The rgt 136161 has oil shocks but not sure if they would bolt on to the mn99 withoutmodification. Might not even be the right length but I'm sure someone will try it.
@christopherantonio34533 жыл бұрын
Thanks a lot. 😊
@aceholefirearms58505 жыл бұрын
Awwwww yeaaaaaah!
@alainarcilla67533 жыл бұрын
Got one yesterday and I'm very happy with it, I hope you can have a video on the "how to" upgrades and adjustments (if needed). nice video by the way! SUBSCRIBED!!!
@RunThatRC3 жыл бұрын
check out my playlist you might find some helpful stuff in there. I have a couple of these mn99 style trucks. Thanks for the support! Welcome to the RTR Tribe!
@romanmarino91023 жыл бұрын
Just noticed the Jeep Cherokee in the back what model and upgrades did you use?
@RunThatRC3 жыл бұрын
you almost made me second guess and look at my shelf again. I don't have a model of a Jeep Cherokee but it would be cool!
@romanmarino91023 жыл бұрын
@@RunThatRC actually it was the blue one (jeep cherokee body)
@aeQuator5 жыл бұрын
Just ordert my mn99 about a week ago...I hope the S Version is just Lights.
@RunThatRC5 жыл бұрын
Yes the "s" is just a silver color with lights. If your interested in the lights and have a mn96 or mn99 you can plug and play these lights on them. I have a link in description for the light kit.
@prembhagat95622 жыл бұрын
👌🏻👌🏻👌🏻☺️☺️😇👍🏻👍🏻👍🏻👦🏻
@johnverschoor75133 жыл бұрын
Can you put an action figure in it also?
@RunThatRC3 жыл бұрын
yes people do.
@emmanreyes29964 жыл бұрын
Can 1:12 scale figures fit inside?
@RunThatRC4 жыл бұрын
I am not sure. die to scale figures being off a bit it would depend. I still dont have any good size figures for these mn models.
@TerryWhite-q6q3 жыл бұрын
Almost 60k views bro!
@RunThatRC3 жыл бұрын
switch that number over to Subscribers and it would be awesome hahaha.
@waleedmoftah68514 жыл бұрын
I have mn d99s upgraded with 2 speed motor 20A esc and a new transmitter but i lost the stock lighting function any idea for making it work
@RunThatRC4 жыл бұрын
I have no idea how to make the stock lights work with aftermarket electronics. Seems like maybe a sound kit upgrade is needed if you want that functionality back.
@waleedmoftah68514 жыл бұрын
@@RunThatRC any suggestions
@RunThatRC4 жыл бұрын
Sorry I can't point you in the right direction for a light kit because I have not tried any light kits other than the wpl v2 and V3 esc with lights and sound. If your up to modify you can probably rewire or use new leds to work with the wpl board.
@mobilmobilan2023 Жыл бұрын
thanks for your recomanded.
@RunThatRC Жыл бұрын
any time!
@mistermasada18295 жыл бұрын
Thanks for the coupons!!!
@johnverschoor75133 жыл бұрын
Can you paint this model ?
@RunThatRC3 жыл бұрын
yes people do prep and paint these.
@ak-do8rw3 жыл бұрын
For how much time does the battery run for on this MN 99s
@RunThatRC3 жыл бұрын
depends how and where you run it. People get anywhere from 15 to 25 mins.
@ak-do8rw3 жыл бұрын
Ok, thank you for the information I might order it next week 🎮🕹🏎
@sooperwill4 жыл бұрын
Just bought one of these! Can't wait to play with it!
@stephenchun68255 жыл бұрын
Awesome thanks for the review bro
@russwoodward82515 жыл бұрын
Decent. I like it. Thanks for this review as well as all the others.
@DADRacingYT5 жыл бұрын
ive watched a bunch of your videos and not sure how i wasnt subbed lol. just did 👍
@reevancreation28343 жыл бұрын
Sir is the throttle is controllable
@RunThatRC3 жыл бұрын
throttle and steering are both proportional.
@FilmingAustralia16233 жыл бұрын
thanks for the vid i have bought it now
@sankeitsr3 жыл бұрын
Hello, I bought MN-45 non proportional a few months ago for my son but then it lead to me getting interested in the hobby myself. So I bought the WPL C24 metal kit and assembled it after watching your videos. It was very satisfying. Can you give me some ideas as to how to go about converting the MN-45 to full proportional? Thanks!
@RunThatRC3 жыл бұрын
at the minimum you would need a esc receiver or the wpl esc receiver combo and a 3 wire steering servo and maybe steering horn and links( not sure how the none proportional steering setup looks like). The motor should work for now unless you want to go 2 speed with metal driveshafts. these are all wpl parts I have been recommending btw hope that helps.
@sankeitsr3 жыл бұрын
@@RunThatRC Sorry for the delayed response. Thanks for the information. I will order these items from WPL. Merry Christmas!
@ianmangham4570 Жыл бұрын
@@sankeitsr You still got it
@jimmietrain5 жыл бұрын
Got mine last week, waiting for it in the mail, I cant wait! love the videos!
@VoidXRC5 жыл бұрын
Cool bro that was a good look at it
@norsyahminoryazid8203 жыл бұрын
How far can you control it
@RunThatRC3 жыл бұрын
it's never lost signal when in use but I'm always not too far from it because they are small. They do go a good distance imo.
@ianmangham45704 жыл бұрын
Landrovers look amazing in scale rc
@HeshadsRC4 жыл бұрын
Awesome video I subscribed 👍👍
@huntertheslayer88583 жыл бұрын
Is this water prof
@RunThatRC3 жыл бұрын
not waterproof out the box but you can waterproof them.
@Hjerte_Verke2 жыл бұрын
If you buy one of these in 2021 they {may} come with red and amber tinted light lenses, plus the LEDs themselves are now colored. The top rear running lights on mine are clear but you make them red by adding the lenses, but the lower inside ones are red LEDs and have red lenses. Those need to be switched with the clear ones and the red ones put in their place, plus you need clear lenses for the reverse light. The turn signals are still amber/yellow LEDs.
@RunThatRC2 жыл бұрын
nice info!
@DADRacingYT5 жыл бұрын
yeah this seems like you dont really have to upgrade it like the wpl for some indoor fun
@RunThatRC5 жыл бұрын
Some wheel weights and your good to go!
@DADRacingYT5 жыл бұрын
@@RunThatRC nice. might have to get that for the kids. rgt has a 1/10.. more like 1/12 for $120 on ebay. would be a nice little comparison
@liuaust14 жыл бұрын
@@RunThatRC Hi mate, great review, just for a noobie, what are wheel weights and whats their function?
@RunThatRC4 жыл бұрын
@@liuaust1 most people use weights in the wheels to increase the performance of a crawler by having the weight down low preventing you from rolling over as much. There are different ways to weight your wheel. Some people use sticky weights for actual cars or solder wrapped around your wheels.
@semperatis5 жыл бұрын
Nice that this one comes with all the lights installed,fitting a full lighting kit in the original was a nightmare.
@RunThatRC5 жыл бұрын
I bet it is! This one has light boards that install in the locations. A lot of wiring underneath this one for sure. I will post a update when I figure out how to keep the headlights on.
@modelnutty65035 жыл бұрын
wasn't TOO bad going full LED's, I used 10 mm LED's and the chromed plastic bezels... fit the body perfectly with 2 mm chrome ring showing with the grill on (cut the fake plastic headlight lenses away). they're damn bright, look really nice, and fit like they were made for it!
@mwk9634 жыл бұрын
Nice video, i ended up brought mine mn99s after watching this! I've upgraded my mn99s with receiver, esc and 370 single speed metal right gear after unboxing. But haven't have any clue on how to enable the stock lights on mn99s with the new esc and receiver. The mn99s light kit have 6pin connector , unable to fit it channel 3 of my receiver. Other than buying new light kit, is there anyway to run the stock lights on my receiver?
@RunThatRC4 жыл бұрын
I think you would need to get a new light kit or light Controller and wire those LEDs up to it.
@rcgarageph72285 жыл бұрын
Rtr you have redcat gen 7 i can see on chevy body the red
@RunThatRC5 жыл бұрын
Yup thats a gen 7 sport. It's my friends truck. Needs new front diff.
@gadezso4 жыл бұрын
I bought one with the coupon code provided ,thanks .Waiting for delivery
@RunThatRC4 жыл бұрын
Thanks for the support. You will like this one. It looks good and performs way better than the older versions.
@AaronBrown-wi3zs4 жыл бұрын
So I bought the mn99s. It's great. But it dosent crawl. If I add a esc, will it help it crawl a little slower?
@RunThatRC4 жыл бұрын
yes a better and higher amp esc will help you slow crawl better. also you will be using a different tx/rx. the wpl V3 esc receiver combo works great.
@jahmenrcbuildingasone42544 жыл бұрын
Can the model fit the new sound kit? I look this color and the way it looks. Im new to yiur channel too Ive subbed tocget all the tricks and tips for the WPL family.👍👍👍
@RunThatRC4 жыл бұрын
It's a different board all together if you get the wpl v2 sound kit/esc receiver combo. So that would boost the MN99s performance
@mistermasada18295 жыл бұрын
I like the lights! Thanks for posting. It looks much better on camera than in the stock photos on the Banggood site.
@RunThatRC5 жыл бұрын
I agree. It looks less toyish in person. Just wish you could turn the lights off from the transmitter and wish it had sound. But it's still cool looking.
@mistermasada18295 жыл бұрын
RunThatRC : Even though it doesn’t come with metal upgrades as pictured on the box, where are those upgrade shocks available? I haven’t seen anything for the MN specific models as far as metal shocks go. Hit me up some time on Facebook(Beretta Ready).
@RunThatRC5 жыл бұрын
@@mistermasada1829 yeah I do not know where to get those parts they pictured on the box. They need to provide those upgrade parts at least. It's not bad the way it is but they need a new truck to freshen up the fleet. It's a nice d90 for sure, but giving another option would be nice.
@modelnutty65035 жыл бұрын
eBay up some A285004's, they're a really good fit! you can use the screw holes for the inside-most screws of the front+rear trays is easy, mine are drilled+tapped top edge of frame just outside (inboard) of the trays to sit a little lower+softer... is a steeper angle. I'm running the shorter Fayee rims+tires too, so CG is a bit lower with more track width = stability. with stock wheels (taller) the tray screw holes are about right. at the axle mount, barely open larger with a drill bit, put the shock on and a tubing spacer, then the screw. nice threaded bodies is easily adjustable and the spring weight is just about right too. they're usually 13-14 bucks for a set of 4.
@stevenbolam4 жыл бұрын
I'm now happy that my MN99 from HK was lost in transit ( seller refunded but couldn't replace ) . Just ordered the 99s from a local Aussie supplier for less $s than anywhere I could find O/S , 🤗🇦🇺😎 .
@RunThatRC4 жыл бұрын
Nice! That worked out for ya!
@jeanzerfullen88864 жыл бұрын
Great video man. I've already bought one of this mm99s. Can't wait to mods and trail with it. I also bought c14 n b1 and one of those two will have 4ws with simple wiring. Huhu
@RunThatRC4 жыл бұрын
Right on! Sounds like fun is on its way!
@wanchanel3 жыл бұрын
MN Best MN99s Model for sure
@michaelmcdonald16203 жыл бұрын
what's your opinion on this MN99s vs the new WPL C24-1 in RTR form? Performance, durability, upgradeability, fun factor, etc?
@RunThatRC3 жыл бұрын
to be honest they are close when you mod them. I like Toyotas so I say go WPL! If you like the mn model defender look then get that an mod it. In stock RTR trim both need mods for better performance(RTR mn model tires on newer mn are softer than rtr WPL).
@brcoutlook14822 жыл бұрын
Hey David just a quick question on the mn99s...I was wondering if you have done any upgrades to one yet and if so do you have a video??... I've just finished installing adjustable linkages, shocks, wheels and tyres and am extremely unhappy with the linkages they move around way to much I have gone and bought the fixed metal linkages hoping they'll seat better on the chassis frame....if I'm missing something I don't know haha just trying to get some more and clearer direction with upgrading it...cheers mate
@RunThatRC2 жыл бұрын
I have a couple older videos on the mn d90 which is the same truck. I only really upgrade to the wpl 2 speed, metal driveshafts and change the electronics to something like a 30a esc minimum and a flysky or hobbyporter transmitter and receiver. Makes it come alive a bit more.
@michaeladrian3262 жыл бұрын
Hi brother..hope you're well and doing good.. I saw your videos and specially this MN 99 silver I really love this Defender please help me to get one... I live in UAE... I tried to get it from many places but it's way to expensive so can u help me out get this for a price... thanks and take care keep safe and May God bless you
@RunThatRC2 жыл бұрын
I don't have any hookups on mn model stuff and not sure where to shop for one other than banggood or Amazon. prices do vary so its worth searching for a deal before purchasing.
@fandyandy1274 жыл бұрын
I bought this, and something wrong with my mn d99s. Cant move forward and backward. Left and right was working fine. Pls help me
@RunThatRC4 жыл бұрын
its hard to diagnose a rc without seeing it but check all the wires to your motor and esc to make sure nothing is broken or disconnected.
@twixonlinetwixonline40254 жыл бұрын
This is waterproof?
@RunThatRC4 жыл бұрын
not waterproof out the box but isn't to hard to make waterproof.
@twixonlinetwixonline40254 жыл бұрын
@@RunThatRC ok
@anukferdinando44583 жыл бұрын
in your opinion which would you think is better: the WPL C24 or the MN model MN99s?
@RunThatRC3 жыл бұрын
c24 in kit metal version all the way for me.
@RCkerenmobilan19884 жыл бұрын
Good.. this is macho..😎😎
@fowlerfinefurniture2 жыл бұрын
Drove mine a little too hard. Now it won’t move, lights work and wheels turn but something is wrong with the motor. Any ideas on fixing?
@RunThatRC2 жыл бұрын
hard to say without the physical truck infront of me. Maybe the esc or motor couldn't handle the abuse.
@Ariyani_Store4 жыл бұрын
love the video ❤🤩😍👍
@Vovloguru2 жыл бұрын
Hello, i wounder if the batterys is charged from the begining or if you got to charge them first and if the charger is supposed to shine red
@RunThatRC2 жыл бұрын
I haven't used the stock charger in a while but the batteries usually ship partially charged.
@heidenei50223 жыл бұрын
awesome...! i wanted to see the light function, thank you!!
@RunThatRC3 жыл бұрын
Glad it was helpful!
@megaworks291010 ай бұрын
Can I use the c24 receiver control in the MN-99s
@RunThatRC10 ай бұрын
you can definitely use the esc receiver from a c24.
@modelnutty65035 жыл бұрын
just pop in 3 mm red LED's in back. maybe they watched my MN-D90 run video? it's lit up like a Christmas tree (and the plastic gears in rear stripped, oops, all metal now!). it's really easy to pop in functional turn signals, use a Y harness in ch1 steering, plug in a little 10A brushed ESC.. full left or right (full forward/reverse!) will power blinking LED's, not done but do know.
@RunThatRC5 жыл бұрын
I just used red tape and put the lens over that lol. So it looks like a aftermarket tail light. Now the front headlights staying on I will have to figure out.
@modelnutty65035 жыл бұрын
oh easy... patch into the steering servo, you'll find solid 5-5.5v there if there's not someplace more convenient to plug into.
@RunThatRC5 жыл бұрын
@@modelnutty6503 the headlight led is part of the whole front light board. Looks like it needs to be connected to the board for the rest of the lights to work right. I will have to see what desoldering it from the board does to the rest of the lights. If nothing then I will just jump it to the corner lights.
@karlsmith81133 жыл бұрын
New to the hobby (Or rather, a re-kindling) this video i think has just swayed the choice from the wpl c14 to this, thank you!
@RunThatRC3 жыл бұрын
Im bias to the WPL stuff. The MN stuff can also be upgraded similarly but I do enjoy my yotas! Have fun with your new rig!
@karlsmith81133 жыл бұрын
@@RunThatRC I've noticed that there seems to be a growing community around WPL, they look awesome. I think what is going to make up my mind is proportional steering (The 99S has that I think?) Plus its something i can just pull out the box and go to the beach with it, chase the cat around the house etc Haha! I think once i have all the required tools, ill look in to kits and modding a little more
@zoros45034 жыл бұрын
Hi buddy i have the similar model. Did you manage to mod the headlights so they are on all the time? Pls make a video how you did it Many thanks
@RunThatRC4 жыл бұрын
look at my community post. about 32 post down I have a picture of what wire to move to get the lights to stay on solid while the truck is on.
@zoros45034 жыл бұрын
@@RunThatRC thanks a ton.. Loving this headlight mod.. Out of curiosity is there any mod to turn side indicators to hazard lights?
@expduts46844 жыл бұрын
Hi, is it 3 wired servo? Thanks and more power!
@RunThatRC4 жыл бұрын
yes they come with 3 wire servo.
@technicaltreats270427 күн бұрын
380 motor?
@inside_line_media3 жыл бұрын
drives good for like 2 mins.. the power is so low you can barley get over a rock
@RunThatRC3 жыл бұрын
sounds like it can be a bad esc. the low voltage cutoff may be set too low.
@danielemulazzi73094 жыл бұрын
Woww! !...spettacolare !!!
@djdc814 жыл бұрын
Bought this. Postage from China to UK will probably take weeks, but looking forward to it.
@ipyonoti4 жыл бұрын
Does it come with controller and receiver?
@RunThatRC4 жыл бұрын
yes comes ready to run.
@emersonpedro39445 жыл бұрын
Show,,,,,,,
@remibergeron23472 жыл бұрын
Mn99s or wpl c34 us best strong valu rc crawler?
@RunThatRC2 жыл бұрын
I'm biased because I'm a yota guy but both can be modded and made to be a cool little rig. My opinion if you can build kits try the kit versions of either of them.
@ANYTHING-AND-EVERYTHING.4 жыл бұрын
Is the 99s fully proportional?
@RunThatRC4 жыл бұрын
Yup sure is.
@Good-fn1vl3 жыл бұрын
Finally a rock crawler under £50 😍
@RunThatRC3 жыл бұрын
a fun and affordable one to modify as well.
@Good-fn1vl3 жыл бұрын
@@RunThatRC what are the upgrades that I should do to it straight away?
@RunThatRC3 жыл бұрын
@@Good-fn1vl metal driveshafts and that should be ok unless you plan on crawling instead of trailing.
@Good-fn1vl3 жыл бұрын
@@RunThatRC is the mn99s or mn86ks better?
@bencairns38943 жыл бұрын
i have one of these but it is making noises and won't move
@RunThatRC3 жыл бұрын
That is never fun. You might have to take it apart and check all the connection then you can start running down the electronic components to see what went wrong. If it's brand new I recommend contacting the seller and see if they can help you out.
@nathencosgrove8774 жыл бұрын
RunThatRC have you had any shipping issues with Banggood?
@RunThatRC4 жыл бұрын
I have had issues but not much. I had 3 packages with issues and one lost by usps. Banggood took care of it everytime once I provided some information and showed i never received them according to tracking so its been a good experience for me so far.
@nathencosgrove8774 жыл бұрын
RunThatRC okay thank you I just ordered the mn99 so I’m curious!
@KHRacing3 жыл бұрын
Someone please tel me if it’s fully proportional!!
@RunThatRC3 жыл бұрын
fully proportional
@kevospestair49783 жыл бұрын
I ordered mine last week and the upgrades I don't even have it yet and I'm in love with it
@RunThatRC3 жыл бұрын
small truck but big fun!
@kevospestair49783 жыл бұрын
@@RunThatRC what is a good tire size for the mn99s I'm new to this lol
@SPEEDTER6015 жыл бұрын
Hay Dave, mine is on its way 👍😁👌I ordered the metal frontbumper and the skidplate with it, as well as 4 c34 wheels I think they look more scale. Nice to see it.👍
@RunThatRC4 жыл бұрын
Nice! Yeah the c34 wheels and tires are nice.
@nathencosgrove8774 жыл бұрын
Did u order from banggood
@SPEEDTER6014 жыл бұрын
@@nathencosgrove877 Yes indeed.
@nathencosgrove8774 жыл бұрын
SPEEDTER601 how long did it take to come in
@SPEEDTER6014 жыл бұрын
@@nathencosgrove877 About a month.
@Defender-Guy2 жыл бұрын
Never been a fan of that style of radio. Can you swap it for a standard 2-stick radio?
@RunThatRC2 жыл бұрын
like the air style radios? If so, yes if you upgrade the electronics to your own. then you can use a stick style radio with a air receiver. I've done it being from the stick style era as well. I just got used to these and like these types now for my ground and water RCs.
@Defender-Guy2 жыл бұрын
@@RunThatRC Thanks!
@muhguyva83954 жыл бұрын
Just got the MN99s and I'm curious if you've found a good way to keep the headlights on without applying throttle. Was thinking about tapping them straight into the running lights. We'll see when it shows up tomorrow.
@RunThatRC4 жыл бұрын
I haven't messed with it. The lights are directly soldered to a board that holds the lights in place. Not sure if the headlights need to be on the board to complete the circuit for everything to function properly. I may try and desolder them and wire them up to the running lights like you said. But I might also change the headlights to a more scale halogen style yellowish light.
@muhguyva83954 жыл бұрын
Thanks for the input. I guess I'll have to wait till it shows up to get a better look. Never really messed with the toy grade stuff, but these are so inexpensive I don't mind hacking it up. Do you know if you can bind a different transmitter to these 2 in 1 boards?
@RunThatRC4 жыл бұрын
@@muhguyva8395 never tried binding it to another tx. Wonder if anyone knows the protocol they use? The electronics are sub par still and I end up replacing them with my own. These wpl and mn model are my first dive into cheaper RC kits. I had nothing but nitro rigs like the tmaxx, Rs4 touring cars, kyosho and losi buggys, short course trucks. Now I'm pretty much full electric besides my OG TMAXX. I just wanted a little Toyota crawler to build and mess with and I found these little tinker toys. I enjoy them as much as my pricier rigs. It's fun to push its limits because parts are affordable. You will enjoy it once you find the setup you like. So many ways to go about your build so have fun bro!
@muhguyva83954 жыл бұрын
Now I see what you mean about lights being integrated. Yeah, not worth the effort.
@RunThatRC4 жыл бұрын
That was my feeling too when I took a lot at them. Don't know why they had to go this route but o well hahaha.
@_The_Melody_ Жыл бұрын
What is the difference between mn99 and mn99s
@RunThatRC Жыл бұрын
I think its just color and lights.
@_The_Melody_ Жыл бұрын
@@RunThatRC okay thank you
@christopherantonio34533 жыл бұрын
Can i still use my stock remote transmitter if i upgrade it to brushless motor w/25 amp ESC
@RunThatRC3 жыл бұрын
no unfortunately that only works with the electronics that are included. You would need a esc, receiver and transmitter(controller) to go brushless.
@christopherantonio34533 жыл бұрын
@@RunThatRC Thanks alot. 😇
@RunThatRC3 жыл бұрын
@@christopherantonio3453 no problem! If you have anymore questions just ask. I try my best to help if I can!
@komangg23574 жыл бұрын
Saya belikan saya mobil mohon melikan saya saya orang Indonesia saya tingg di. Bali mohon pelis om
@TotalOverkillStudios4 жыл бұрын
Whats the wheel base and tire diameter of this RC? Thanks.