Nice work Phil! Polished video and great info. I may incorporate that product to streamilne my process. I was soild when I saw the tar just spray off. thx
@robhill81972 жыл бұрын
The tech may be there, but IMO they are really pushing the envelope on pricing for the NMS. Coming in at $105 for 5L works out to about $1.24/wash if you use 2oz per wash AND buy it 5L at a time. Considering GSF already sits at the upper end of the market @ $85 for 5L works out to $1.00/wash. I can see the thought process of skipping the toppers, but you can still get under that $1.24/wash WITH a topper and good quality Shampoos/Snow Foams. On the contrary, that Af is going to go nuts IMO. They're going to give us an Alkaline pre-wash, which stays in the pH range of most all coatings at $52/5L or $0.30/oz. Considering how well that stuff foams at 1oz, 1oz/wash is easily doable. So I can pre-wash my vehicle for $0.30, then come back with a pH neutral soap in the $0.20/oz (Adams) - $0.45/oz (Griots), top it in the $0.30/oz (Dreammaker) - (Wet Coat) $0.70/oz range and get everything for the around the same price per wash of ONLY using NMS. Looks like a great product and I'm sure the paid-tubers are about to go nuts on trying to sell us the NMS, but man that price is stiff. Great video.
@greggriffin3242 Жыл бұрын
That coding looks amazing. Is it available in the states now eight months later
@MirandaDetailing Жыл бұрын
Hi. Yes it is bit.ly/3JNZsuz Use miranda10 for 10% off
@dmeaux10002 жыл бұрын
I really enjoyed seeing the two soaps being used. I was amazed at how well it attacked the tar and bugs. Great looking results.
@MirandaDetailing2 жыл бұрын
Thanks! 😎👍🏼
@stevefulton58842 жыл бұрын
That was very informative. I have a car with a 5 year coating on it at the 1 year mark. I think I need to do an alkaline prewash and some descaling on the lower doors to unplug some of the pores. I appreciate you, Phil.
@MirandaDetailing2 жыл бұрын
Glad it was helpful!😎👍
@ramirotorresjr75182 жыл бұрын
Amazing work Phil love the GSF my favorite snow foam and cherries is my favorite fruit so having that scent is amazing now I'm excited for these other products love that tire shine look and the pre wash shampoo.
@robertknapp8952 жыл бұрын
Loved the video guys thanks Philip / Jason Miller awesome products I loved the tire/ water spot remover / the soaps in the process of owning a new power electric power washer also mtm foam Cannon so that soap should be nice 👍 to use thanks again have a great day guys hello Mrs Miranda
@OhDannyBoy2k Жыл бұрын
I know it was discussed a little bit in the video about various factors affecting foam cannons, but, if you were going to use Active Foam in a foam cannon, what kind of ratios should you be looking at? Something like 1 fl oz in 32 fl oz container?
@MirandaDetailing Жыл бұрын
Hi. Yeah give that a try. I usually do about that same ratio myself. Adjust from there if it’s too much or too little foam. 😎👍🏼
@bjerkeli Жыл бұрын
I love the Teerwäsche A (Tea). I use it a lot in the winter here in Norway. Fantastic product! Spray on, wait a bit, and apply greenstar from foamcanon over it
@jeromeboily2 жыл бұрын
When will we see a comparison of prewash in the IK . Compare active foam and SUPER foam. I don’t know which one to grab as a prewash for customer cars that are not protected. I really like the idea of prewash with soaps instead of a degreasser, i think it is wayyyyyy safer on the paint
@MirandaDetailing2 жыл бұрын
Soon! I’m working on it! 😎👍🏼
@MikeBee77 Жыл бұрын
This would be a great comparison video. I am thinking to buy the KC Active Foam and if I ever need it to be stronger, just add a little bit of the Green Star to increase its PH power. I hope it works that way.
@jeffreyrobert94602 жыл бұрын
Absolutely love Koch Chemie products. GsF and Green Star in my MTM foam cannon is my go to.
@versus0237 ай бұрын
I have the smaller Ik foamer Pro 2 (64oz version) and I hate it. I never uses it because I have like 3-5 second max of pressure before having to pump it back again. was pretty impressive to see the bigger one going this long! :O
@MirandaDetailing7 ай бұрын
Maybe this can help. Pump Sprayer HACK #detailing #marolex #cleaning #details #diy kzbin.info/www/bejne/imTEnKuvYqepf6M
@versus0237 ай бұрын
thanks! I have the model with shredder valve. Its just drop in pressur so quick!@@MirandaDetailing
@kimnewling57282 жыл бұрын
That Jeep looked pretty cool. You know I've never heard a bad thing about Koch Chemie. I've been using M302 a bit, and I really like it. Fun video Phil. Hi invisible wife. Lol.
@declanflaherty89582 жыл бұрын
Phil, ja das ist wunderbar! Koch chemie have been in EU for a long time and have kept low key. I stumbled upon them just because I wanted to branch out from bilt Hamber. So hence Green star ! One amazing apc and then their FSE detailer. It’s an amazing water spot remover! Just remember it’s acidic and shouldn’t be used as a conventional detailer. Enjoy!!
@clintrockabar81002 жыл бұрын
So much useful information, thanks for sharing, Phil! Might need to put some of the KC products on my wish list!
@MirandaDetailing2 жыл бұрын
Thanks!!😎👍🏼
@trustnoone478810 ай бұрын
I love super glossy tire shine
@chelsabailey10184 ай бұрын
Me too! I think more people like that look on tires than are given credit.
@Greg-f2n6 ай бұрын
Great video!!What coating is on this vehicle
@MirandaDetailing6 ай бұрын
Thanks! It’s the Koch Chemie coating. They only have one in the US right now. www.carsupplieswarehouse.com/products/koch-chemie-ceramic-allround-co-01?_pos=42&_sid=47c7efde4&_ss=r
@chelsabailey10184 ай бұрын
Very cool video, Phil. I've seen other detailers use Koch Chemie products in their videos, too. Good products without a question, as are most things that are German made. While Koch Chemie's prices don't work presently fit my budget, I will keep them in mind for the future. Thanks for posting!
@truejey74757 ай бұрын
hey Phill what color tip you have on that ik.
@MirandaDetailing7 ай бұрын
Hi. Ummm…actually I don’t remember. Whatever it came with, I never changed it.
@nicksdragon69292 жыл бұрын
I noticed that the sales rep pronounced Koch as the same as the word Coke and you pronounce it like most of us. When he introduced the owner of the company he pronounces his last name as Coke so I'm going to start calling this coke Kimmy. By the way could you find out whether or not they're going to finally make the MP in a gallon so that as detailers we can get it at the most cost-effective bases versus paying the 12 to $16 per little bottle. Thanks buddy
@MirandaDetailing2 жыл бұрын
Yup. That’s the correct way to say it. I keep reverting back to the way every else says it. Same with Gyeon. It’s supposed to be pronounced with a hard “G” like “gone”. But we also say Gee-On. Funny how pronunciations work.
@derek7232 жыл бұрын
@@MirandaDetailing it goes to show how hard it is to get naming right for an international brand that spreads across multiple cultures. "Coke chemie" or "Geeyawn" might roll of the tongue easy in foreign cultures, but in the US it feels awkward as heck
@MirandaDetailing2 жыл бұрын
Exactly! 😁🤣😎👍🏼
@PolishedMobileDetailing5032 жыл бұрын
Where the heck are you getting MP for $12 lol
@TheBreakfastLover Жыл бұрын
It seems the Germans pronounce it "coke-shemmy"
@tonyjirik21452 жыл бұрын
This was great information Phil.Thanks also to Jason for doing this video. I use the GSF and NMS shampoos as well as GS etc etc. Their products are top notch. One of my favorites is Leather Star. Customers love it. Looking forward to using some other KC products. I need more room! 😀
@MirandaDetailing2 жыл бұрын
Thanks so much!!😎👍🏼
@roberovalle31072 жыл бұрын
Great video with amazing information, thanks Phil.
@CTTH10011 ай бұрын
If mixed at 100:1 ratio is KC Active Foam's pH safe for weekly maintenance washes on a ceramic coated car with minimal grime?
@MirandaDetailing11 ай бұрын
Yeah it will be fine. But I would just use their Gentle snow foam instead, no need to use a stronger soap if it’s not that dirty.
@CTTH10011 ай бұрын
@MirandaDetailing Thanks! I've been using Gyeon Foam, which does well but a bit pricey. Just looking for a little bit more touchless than a neutral foam that may not be as effective. I'll give GSF a shot.
@MirandaDetailing11 ай бұрын
@CTTH100 Oh I see. Are you simply foaming and rinsing and not contact washing?
@CTTH10011 ай бұрын
@MirandaDetailing I "try" to alternate weeks with contact washing. I wash about weekly, so it's just road grime. Generally, I apply Gyeon Foam to dry car, then rinse, then foam MTM Foamtastic and rinse (or contact wash).
@shannonkeller7940 Жыл бұрын
Mr Phil, any chance of seeing a video of you using their new coating??
@MirandaDetailing Жыл бұрын
Perhaps in the future!
@thinkforyourself56722 жыл бұрын
Phil I highly recommend trying the Marolex sprayers. I can't say anything about filling them with a compressor but if you ever use an IK by hand pumping, The Marolex is leaps and bounds an improvement. They're legit
@kevincampbell82982 жыл бұрын
He has some marolrx sprayers.. Phil has used them in videos in the past. One or them can’t remember.
@MirandaDetailing2 жыл бұрын
Thanks! Yeah do have them also. 😎👍🏼
@flowinthrou Жыл бұрын
What's more, the IK 10L is so expensive, that you could even use 3 other regular sprayers in a row without pumping.
@AntLive292 жыл бұрын
This was an informative video. I still like wet look tires tho! Shine baby shine haha
@waynefromnewfoundland87402 жыл бұрын
Good video. I switched to Gsf last summer. Great for maintenance washes. I just had a bottle of Motorplast delivered a little while ago. Looking for forward to doing my spring maintenance and using that product. Nice to learn about different products and how to get the most from them. Another great video.👍🏻 P.S. I know you also like GTECHNIQ products, so I also bought a bottle of C4 trim restorer. Your confidence in their products helped in my decision.
@MirandaDetailing2 жыл бұрын
Thanks! That’s awesome!
@waynefromnewfoundland87402 жыл бұрын
@@MirandaDetailing Thought you might like to know that. I own a ‘18 CRV (so there is a fair bit of trim) and I will let you know how it comes out.
@zzhughesd Жыл бұрын
Great !!!!! Would love some help. TFR. Not left dwell on plastics. Just to hit body and washed off I’m using TFR instead snow foam soiled older cars pre a paint correction and polish. Is there anything wrong with going in heavy on TFR in snow cannon??? Cheers 😅
@MirandaDetailing Жыл бұрын
Hi. Thanks. I don’t use dedicated TFR products but basically they just high ph APC’s. You can use those in a foam cannon or IK foamer like we do. We only use them on initial details that need deep cleaning before protection is applied or polishing and ceramic coatings.
@Mdetailing2 жыл бұрын
We love Koch full.line in Europe, witch we have the privilege to have even more products.from KC.
@Mdetailing2 жыл бұрын
I can add very important on GSF easy to rinse no residue to fight!! We have here also AS ( auto shampoo) witch i like
@Mdetailing2 жыл бұрын
I cannot remember Phil..Af can be used also with bucket and wash mitt for contact wash correct? ....so much KC products here hahahah..... Usually in Europe we like Strong runny ..... not so foamy... soaps..to fight traffic film salt e.t.c..and that is why European manufacturors are in this way with their soaps.
@MirandaDetailing2 жыл бұрын
Hey man. Yeah hopefully KCX will keep bringing the other products here also! Yeah each of these soaps can be used in the bucket as well.
@Mdetailing2 жыл бұрын
@@MirandaDetailing great video Phil keep up, greatings to Koch from my Greek Detailing chanell ,i have reviewed many KC products ,soap APC compounds, AIO ,limesclae remover...we love them.....
@kevincampbell82982 жыл бұрын
Sure rub it in! lol Canada less than US.. ;-(
@richardseem79482 жыл бұрын
Awesome review and great idea 4 the video.seems like generally cool guy 2 talk 2.
@zekesgarage3917 Жыл бұрын
I've seen some mobile details presoak with really thick foam since they wash the wheels during the dwell time. Do you think that is a good way to approach this scenario of a really dirty vehicle, presoak, clean wheels, rinse, then contact wash?
@MirandaDetailing Жыл бұрын
Hi. Oh yeah totally! Each Detailer will develop their own way or methods. True we start by copying what others do but then later adapt and evolve to suite your specific style and way of doing things. 😎👍🏼
@Ara_Milan2 жыл бұрын
BEst video of 2022 : like the tip for Koch chemie FSE
@alexbryan76412 жыл бұрын
Koch chemie products are exceptional! I’ve been replacing my lineup slowly lol
@flowinthrou Жыл бұрын
I wash in the sun, too. Is there anything we can do to prevent drying of foam? I've thought of spraying water with a hand pump sprayer.
@MirandaDetailing Жыл бұрын
I’ve noticed with hood shampoos if the foam dryers it’s ok, it doesn’t cause any issues for me, but if you have hard water any drying of the foam or water on the paint isn’t good. You may have to get a DI water system
@RaldasDetails2 жыл бұрын
Awesome video great info!
@CaliforniaCasey2 жыл бұрын
🏆
@JJS432 Жыл бұрын
PH level won’t matter once the product is diluted into a 5gal bucket. Even at 10L to 50ml, the PH drops drastically.
@MirandaDetailing Жыл бұрын
That’s true, that’s why we never foam up the bucket as our wash bucket. We foam it on, still it dilutes it but not as much.
@barrybij80792 жыл бұрын
great information...glad you mentioned the coating..Two years is fine... after that long marring will occur anyway and to make the paint look nice again you have to get out the polisher... I don't understand 7-10 year coatings....Also, even on my coated car I I have been apc rinsing... the more grit you can get off before hand washing has to be better...
@MirandaDetailing2 жыл бұрын
Thanks! Yeah I agree. I like 2-4 coatings for my customers.
@ddautodetailing2 жыл бұрын
Awesome video! I can't wait to try more KC stuff!
@sergiuangelo Жыл бұрын
can you use Nano magic shampoo on a coated car ? does it interfere with the water behaviour of the coating ?
@MirandaDetailing Жыл бұрын
Hi. Yes that’s what it was formulated for. It adds a layer of Ceramic protection. It’s a maintenance shampoo. It add more beading if that’s what you want. Any maintenance shampoo or ceramic spray is going to add to the hydrophobics of the coating not interfere with them.
@richardseem79482 жыл бұрын
Awesome video/product review/content good friend
@nickd.38682 жыл бұрын
Awesome video. Very informative. Keep it up!
@eddiegarcia96892 жыл бұрын
On a side note - What brand sunglasses are you wearing in the beginning of the video? And are they polorized?
@MirandaDetailing2 жыл бұрын
Hi. They are just cheap sunglasses I got from a local tj maxx.
@TrueSenseMobileDetailing2 жыл бұрын
Great video man! Thank you so much 🙏
@coreymerritt77422 жыл бұрын
Very informative Phil thanks
@annagraham6204 Жыл бұрын
Fine line between learning and watching one giant infomercial. Balancing act for sure.
@MirandaDetailing Жыл бұрын
True’ish….The only thing is I don’t get paid for my videos. Only affiliate links, and they don’t bring in much.
@Kochegarov2 жыл бұрын
Thanks for very informing video! Could you tell me please: I have Q2 Mohs coating on my car, and it is written that it is resistant to ph levels from 2 up to 11. Does it mean that I should not use Sfn Superfoam on this coating, because it has ph 12? Or I can use it for grimy areas as prerince, for example, lower parts of doors and fenders?
@MirandaDetailing2 жыл бұрын
You’re welcome. You can use the high oh soap sparingly if you notice it needs more cleaning power. But I wouldn’t use it on a regular basis.
@Kochegarov2 жыл бұрын
@@MirandaDetailing Got it, thank you for the answer!
@casey84492 жыл бұрын
You guys have all the fun on the East Coast! Great video Phil x Jason!!!
@MirandaDetailing2 жыл бұрын
We sure do!! I want to do something with detailers on the west coast soon!
@zackaryscott12652 жыл бұрын
When Jason said that the trim was covered with the ceramic, did he mean the black plastic trim around the wheel well/ bottom of the vehicle as well? Or was that plastic treated with the PlastStar
@MirandaDetailing2 жыл бұрын
Hi. Nope he meant the actual ceramic coati g that was used on the paint was used on the trim also! Awesome right?!😎👍🏼
@PolishedMobileDetailing5032 жыл бұрын
You can use optimum gloss coat this same way , good for all surfaces except glass.
@ROBERT-eg4ys2 жыл бұрын
Hey Phil Koch All Around ceramic coating any date set for the US when it will be available to order for DIY or just Detailers?
@MirandaDetailing2 жыл бұрын
Note yet but hopefully this year. It will be a consumer coating available for anyone
@ROBERT-eg4ys2 жыл бұрын
@@MirandaDetailing thank you KMP!!!
@greggriffin3242 Жыл бұрын
Coating
@galandetail Жыл бұрын
can u name a few prewash soaps thats safe on coatings
@MirandaDetailing Жыл бұрын
The KCX active foam is safe on coatings. Or the DIYDetails incredible suds is also great.
@michaelwest7494 Жыл бұрын
Awesome!
@yeshuascutter31702 жыл бұрын
This I think could be why bilt hamber suggest the panel impact ratio system. Precisely because water flow rate, pressure washer, snow foam cannon etc are all different. And, you only need to do it once! Specky Mcsporran explains it really well... Nice vid as usual Miranda!
@MirandaDetailing2 жыл бұрын
Thanks man. Yeah I watched a few of those videos to understand the PIR. I just simplify it and just do my usual dilutions and works out easier and I use less product. I worked out the our first my system and it came to 1:1. Not really efficient for us. But I know it’s works for others. 😎👍🏼
@yeshuascutter31702 жыл бұрын
Couldn't agree more on the 1:1, not exactly good value for you guys in the US! Cost per wash is very important to us all, doesn't matter how good a product may be, if it's pricey it don't get used. Especially when Koch and others are blooming EXCELLENT products. Their cutting compounds are amazing!
@MirandaDetailing2 жыл бұрын
Exactly! KCX for the win
@KDeatherage772 жыл бұрын
Another great video, Phil. Very informative and great products from KC. I have them as well. Going to add the active foam wash to my arsenal. Only have one question, does the FSE have a water beading ingredient in it or is it just a topper to help remove water spots?
@MirandaDetailing2 жыл бұрын
Hi. Thanks! Great question. It doesn’t have protection in it. And it’s not to be used all the time on waxes, sealants, and even coatings because it is a low ph and can stay to break down protection. It should be used sparingly. 😎👍🏼
@KDeatherage772 жыл бұрын
@@MirandaDetailing Phil, you think it would be ok to use say, P&S Bead Maker after you have used the FSE? Or some other topper? Like Meguiar's ceramic Detailer or the Ceramic Wax spray.
@MirandaDetailing2 жыл бұрын
Oh yeah you could do that. For coatings use the intended topper from that coating company also.
@MikeBee77 Жыл бұрын
Would like to know what you think if we were to compare Koch Chemie Active Foam and Gtechniq W4 Citrus Foam soaps? I know KC is more alkaline but not extreme, and Gtechniq is neutral but with that citrus addition, also great for grime and tar. Would like your opinion on them. Great video, thanks!!!
@MirandaDetailing Жыл бұрын
Hi. You work really well actually. The differences between them are not so vast. They both get the job done.
@MikeBee77 Жыл бұрын
@@MirandaDetailing Thanks for your input, good to know this info. 👌
@MikeBee77 Жыл бұрын
I just got me the IK Foam Pro 12 and the IK Foam 2, the Koch Chemie Active Foam and ohh boy, I look like a child with new toys, I am even using this soap with the Foamer to treat the shower walls (playing around inside the house with it too) and I am in love with it, smells amazing and Phill, I also have allergies to a lot of perfumes and scents, but man, Sandalwood scent is amazing. I am with you as far as even using less, still foams like crazy, 1 oz per gallon of water.
@MirandaDetailing Жыл бұрын
Awesome! Have fun man!!
@davidbram2 жыл бұрын
How often can FSE be used on a ceramic coated car?
@MirandaDetailing2 жыл бұрын
It’s not that strong, but I would only reserve it if/when you have water spot issues. Otherwise I would stick with regular detailers or ceramic toppers.
@matthewderidder2862 жыл бұрын
No reason to neutralize the fse if it's acidic?
@MirandaDetailing2 жыл бұрын
Good question. I’ll have to ask KCX. Since it’s also a detailer type product I would assume the chemistry allow for it to evaporate and neutralize. But I’ll ask. 😎👍🏼
@AVSVALETINGDETAILING Жыл бұрын
Would you use Koch Aw or af as a shampoo as a contact wash, snow foam application.
@MirandaDetailing Жыл бұрын
Hi. You can use either one actually to wash with. I sometimes pre wash with our typical APC rinse and then use either super foam or active foam, foam it down and contact wash it. If the vehicle has good protection skip the APC rinse and just use active to foam and contact wash.
@AVSVALETINGDETAILING Жыл бұрын
@@MirandaDetailing active foam can be used as a shampoo too as well as a prewash stage. ?
@stevel38812 жыл бұрын
Link for the bottle measure cup?
@MirandaDetailing2 жыл бұрын
amzn.to/3slZu3A
@emanueleberbiglia7012 Жыл бұрын
What dilution to use for AF with the IK foam pro 12 to get good cleaning power and a wet foam to get it into the dirt ?
@MirandaDetailing Жыл бұрын
I usually do 1oz to a gallon for thicker foam and .5oz to gal for thinner foam.
@emanueleberbiglia7012 Жыл бұрын
so is AF 1:150 still effective as a prewash?
@MirandaDetailing Жыл бұрын
It all depends on the filth of the vehicle. It will still clean well, but of course some dirt, mud, traffic film may still remain. I never go that low of a dilution anyway. I only do 1:10 which usually is 2-3 oz per 32oz bottle. That foams up well and cleans well
@emanueleberbiglia7012 Жыл бұрын
diluted 1:10, in ik foam 12, it makes a heavier and drier foam that falls quickly (it doesn't stick for 5 minutes).. is it still able to soften the dirt in that short time?
@MirandaDetailing Жыл бұрын
You can dilute more if needed. I never let it sit for that long. Usually 2-3 min or less.
@nachomandetailingservices10572 жыл бұрын
Sup Phil !
@nicksdragon69292 жыл бұрын
The Active and/or Super foam, are they more effective than Bilt Hamber's auto foam as a pre wash?
@MirandaDetailing2 жыл бұрын
Not sure about exact comparisons, but KCX products are cheaper here and easier to get them Bilt Hamber.
@nicksdragon69292 жыл бұрын
Great, I just ordered 5L of both the soaps and FSE
@ArthurMSoto Жыл бұрын
What’s a good amount to use with gsf if adding Gs for a pre-wash
@MirandaDetailing Жыл бұрын
Hi. The GSF is not really a pre wash soap. I would use their Active Foam or Super Foam because they are stronger cleaners.
@ArthurMSoto10 ай бұрын
@@MirandaDetailingI bought super foam, and it was 70 degrees today my panels were cool but had some etching on my windshield and black top. Any recommendations? Lol should i stick to getting active foam maybe? Was looking for a good strip wash to test for clients but a bit scared to use super foam unless it’s a cooler day now 😂
@MirandaDetailing10 ай бұрын
@@ArthurMSoto Hi. That’s a strong soap. I don’t use soaps to strip anything. I use strong soaps to add to my cleaning if needed but that’s it. If you want to make sure the paint is stripped of any previous protection I wouldn’t rely on the soap. I would just give the paint a quick polish with a medium pad and polish. That can actually go pretty fast and you get better results. Or you could just use a strong panel wipe if you don’t want to polish.
@ArthurMSoto10 ай бұрын
@@MirandaDetailing Yeah… I’m starting to realize i messed up thinking that. It’s all a learning process! In that case I’ll save it for cloudy days and experiment with. Thanks for the responses your content helps a ton.
@MirandaDetailing10 ай бұрын
@@ArthurMSoto no worries it’s good to learn from what happens.
@nicksdragon69292 жыл бұрын
How good is cook Kimmy FSE actually as a hard water spot remover? Is it comparable to 3D gel water spot remover? The car pro products I've tried descale we're virtually worthless when I use them. If this FSE really works please let me know.
@MirandaDetailing2 жыл бұрын
It’s not a heavy spot remover. It’s just for minor spots left over from washing. The 3D gel is still one of my favorites
@nicksdragon69292 жыл бұрын
When will the Warehouse have the Active Foam 5L in stock?
@MirandaDetailing2 жыл бұрын
Hopefully soon!
@MikesAutoDetailing2 жыл бұрын
Great video
@harrynazarian31842 жыл бұрын
"Apologizes... Jason's mic died..." Grammer bruh, grammer! Yes I misspelled it purposely. LOL! I am hoping GloveBox sends out some Koch Chemie stuff soon. By the way, Koch is pronounced "Coke" in American and "Koh-kh" in German. The KH is like hocking sound you make before a spit and collecting the boogie film from the back of your throat. And man, he came all the way from PA... oof! Must've been a crazy drive with all that traffic.
@MirandaDetailing2 жыл бұрын
🤣😎👍🏼
@cfrontron2 жыл бұрын
Infomercial?
@MirandaDetailing2 жыл бұрын
🤣
@nicksdragon69292 жыл бұрын
Phil when would you usually use FSC what type of application is it after you wash car is it in place of an sio to is it strictly as a detailer and if I heard him correctly he said it prevents water spots is all that correct and if so please let me know how and when you actually apply it.
@MirandaDetailing2 жыл бұрын
So its basically a quick detailer that has a ph of around 2ish. So the formula helps dissolve fresh water spots. It doesn't prevent water spots from future water on the paint, it prevents the water spots from forming immediately after a wash.
@jjjjjjjjjjjhjjjjjhjj2 жыл бұрын
How long can a vehicle sit outside with the green pollen film from trees sitting on it without any damage being done? I am too busy to wash my vehicle frequently and need to find time to keep up on it better how often do you wash your own car ? Does it always sit outside ?
@MirandaDetailing2 жыл бұрын
Letting it sit for weeks isn’t good. As long as it’s washed every two weeks or so.
@jjjjjjjjjjjhjjjjjhjj2 жыл бұрын
@@MirandaDetailing how often do you wash your own ? Does it sit outside a lot
@MirandaDetailing2 жыл бұрын
I wash ours about every two weeks. It sits outside about 75% of the time.
@jjjjjjjjjjjhjjjjjhjj2 жыл бұрын
@@MirandaDetailing what do you think about a bed liner/ Line X full paint job on a truck? Keeping mine outside and being to busy to do my own all the time or store it properly the paint gets damaged quick birds etc my coating is toast from the trees and birds would eliminate polishing Wonder if it would be easy to maintain a full line X job just rinse it have your ever done a vehicle like this ?
@MirandaDetailing2 жыл бұрын
We have washed jeeps that have had the entire exterior painted with line-X. Basically you just have to rinse, foam and rinse it off.