Mobile Gin Bar - Horse Trailer Conversion

[@cynthiasoto264]

I love this so much..... This just inspired me to do the same w my baking business ❤ thank you

[@lynseypope4327]

Looks amazing ! Great job

[@achantejanelle]

Love this! Could you share a step by step of how the foldable bar to was made?

[@iancox9765]

Glued two pieces of 18mm plywood together to get the thickness, cut to size and routed out the rebates for the SOSS hinges. Finished with lots of layers of stain/poly/white spirit mix.

[@ShetlandPonyClubTV]

Nice job ❤

[@lodollar23]

I'd like to have seen a long version. It's very hard to watch a music video

[@christianfarrier5927]

Hi, how are you fixing the framework for the walls to the actual trailer?

[@jamescopas-r1f]

amazing job where do you get all the water bits from ?

[@Benjamin.JM.N]

Great job! How did you attach your wooden battens to the metal skin of the trailer? Did you bolt the uprights to the metal and use joins on the horizontals?

[@iancox9765]

Yes - like building a stud wall. Coach screws through the steel ribs to secure uprights then pocket hole horizontal braces

[@Terry-bu3sk]

That’s amazing. I’m planning on doing the same thing. Can you recommend any resources?

[@iancox9765]

I watched ever single trailer conversion video on YT and picked some of the best ideas! Anything specific you wanted to know?

[@Terry-bu3sk]

@@iancox9765 many questions. What’s the best way to communicate directly? Email?

[@iancox9765]

@@Terry-bu3sk Yes - email is best.

[@odezie03]

Dope

[@prediculoussport]

Looks brilliant. Can I ask what equipment you used to spray it?

[@iancox9765]

Thanks. LVLP spray gun powered by small Hitachi compressor

[@merrylloupendon5449]

Wow

[@santoni58]

Sand blasting would have take care of the majority of the paint and rust removal. Great job

[@iancox9765]

Yes but quotes were ridiculous

[@D.K_RENOVATIONS]

I liked those wheel center caps , did you bought them separate? What’s are they called?

[@sineadninuallain8819]

What type of hinges are used both on the hatch and on the counter?

[@Oguum]

was that simple aluminum foil on the walls?

[@iancox9765]

Search “multi foil insulation”

[@Oguum]

@@iancox9765awsome thanks! :D

[@oOoBRIERLEYoOo]

How do you get power to your trailer? Just through a generation?

[@sebastianlanda3933]

Can i ask how long does it take to made it ? how many working hours?

[@felixsilberg7484]

What is the name of the sales flap on the side that can be opened upwards? where can i buy a flap like this? Thanks in advance

[@conniejohnson6910]

What is the name of the hardware you used for your folded bar top?

[@billharran8731]

I'm building a trailer also what are those hinges called that you used for the bar top I'd like to do the same way

[@iancox9765]

Hi Bill. They´re called SOSS hinges. Unbranded replicas are available on Ebay. You can put together a basic router jig or get a very experienced woorworking friend to do it freehand (like I did). Good luck,

[@lorenford2422]

What is the name of the flap thing you put on the hole you cut out of the trailer

[@iancox9765]

You mean the hook-up?

[@connorcallan4978]

Will you be interested in building another? $$$

[@iancox9765]

Hi Connor - it was a labour of love and a one-off I'm afraid. If you're half competent at DIY and have some helpful friends then just go for it! All the best.