Mercedes ESL emulator programming IM608 Autel

[@ДивноеИНЖЕКТОР-АВТО]

Коллега, большое спасибо за информацию! Долго сомневался, насколько опасна надпись "персонализация не удалась ". Оказывается всё получилось.

[@ghostmade6686]

Hey Man thank you for helping the little guys that no one wants to help or teach. The IM608 Pro did it like a charm and you are right it still programs even if it says personization failed. The quality of the video is great. I was stuck for a lil bit because autels wire diagram does not explain it well enough. But i was able to figure it out and a tip to anyone that watchs this video just take a screen shot and zoom in on the wires and locations in conjuction with the autel wiring diagram you should understand what needs to be done (hopefully) either way Thank you for sharing your knowledge in a cut throat business that no one wants to see you move forward

[@laffenskyette]

Hi bro, how do u use the conjunction connection on els to eis? Is it using the hotel and alligator clip?

[@dashtyATG]

Hy bro sorry to disturb I'm in a same situation need a little help. The ELV is in the lock position and I'm about to do it on the vhecle. But what I don't understand is the wiring connections!

[@Truthcanbeconfusing]

Thanks a lot for this video it helped me out with the 2013 Mercedes C-Class today

[@markhogy1120]

This is the best video showing this procedure. Excellent.

[@tommyherrera6456]

Might you know why my 608 isn’t reading the ELV data to write eis data into the emulator

[@douggregory887]

After the EIS data is read, does it still need to be connected to the G-Box to be able to write the ESL data?

[@segounlocks5029]

My emulators have been working but I don't get a sound out of them on the bench. I have to pray it works. What emulator brand do you use

[@train4905]

Brilliant demo sir.very clear.thankyou.

[@canerkukisi7581]

Can you help me? I want to code the same 204 Eis new ESL. I connect ESL and Eis as the Autel 608 diagram shows and I can read both of them. But when I want to code the ESL (Emulator) light does not turn on and there is no sound. Can you please help me? What am I doing wrong?

[@rudolf_1074]

Question friend I put an emulator on my car for the esl Everything is good now except that the buttons in the steering wheels are not working The yellow plug doesn't have anything to be connected with now What can I do???

[@CrucialSpeaks]

show how to hook up esl plese!

[@amarekpl]

GREAT JOB! Thanks for video :)

[@alkisgeorgoudis1981]

Perfect video perfect explain thanks!!!

[@pelondf77]

Alkis where do you bought the emulator?

[@alkisgeorgoudis1981]

From xhorse

[@dashtyatg1824]

hy thanks again quick question please if i only use IM508 with the rest of other tools apart from the j2534 would that be ok?

[@dashtyATG]

Hy bro did it worked with 508?

[@canerkukisi7581]

if I use a used esl from another car do I have to reset it first and then write to the new one

[@stul347]

Really interested in that particular Autel tool. I have a MS908p, and it’s great. Can see that being a good addition. Although there looks like there could be some pitfalls if you just go pushing buttons! 😆

[@12volttech44]

Hi, would you know if the Im508 capable of this function? when you get the opportunity please make a close up video of the screen on the tool while completing this task again. Thanks for taking the time to share.

[@thesoloadventure5958]

12volt tech yes it can you need the xp400 aswell

[@yunusbeckabdulvakhitov6019]

hello such a scanner where you can buy

[@mynamesjeff69]

@@yunusbeckabdulvakhitov6019 you can buy them from Amazon

[@1fnjo790]

The Autel APB 102 that I got with my XP400 I assume is the equivalent of that X-horse emulator, correct? And that EIS or key box that you used on the bench is what the IR key gets inserted into and came off the same vehicle that you created the key for, correct?

[@rafaelanunes8345]

when you get the opportunity please make a close up video of the screen on the tool while completing this task again. Thanks

[@alaabannourah7464]

Haw I connect the amuolater

[@InitialD15]

Have u confirmed this on the mini elv. I had same issue it says fail. Should I plug into vehicle? Because I have the emulator but it doesn't have the solenoid like that one

[@timmehlittleloud2251]

Do I need a blank key for this process. I can't see a get password function anywhere except in the main add key function which asks me to put a blank key into the programmer.

[@fabinhomaurinho1461]

Thanks for your great vid and the explenation! Which brand is the ELV emulator?

[@pashko90]

Xhorse

[@alaavannoura9449]

Haw i connact the amulator wich wayers

[@newconceptkeys9587]

Great video sir

[@dashtyATG]

To be honest I still don't get it, what if you doing it on the vehicle and the EIS is not turning since the ELV is in the lock position?

[@graysancollins5671]

Then you will have to drop the steering column and drill the ESL out.

[@k20edef1]

How does the emulator get connected to everything? Is there a wiring diagram to that?

[@k20edef1]

Update: Follow both wiring diagrams on ESL and EIS and it will show u clearly. This is with Autel product

[@cooperx2307]

@@k20edef1 dank!

[@easy_key1]

For xhorse mini elv emulator also need to program vin number

[@InitialD15]

Is this a question or response. Did u program a mini elv?

[@fansauto8888]

What kind of adapter you used with im608

[@skinshsdz]

After writing ESL data and put key in EIS simulator beeps 4 times, then turning key 4 more times, and when remove key then 1 time, it's OK?

[@MasudRana-wl6ox]

Great help! Does it require a New/blank key for getting the password? Or I can use the existing key with the same procedure ?

[@DavidGutierrez-zi4dy]

excellent

[@jonyovanno4145]

Awesome stuff! What does a job like that go for $ wise???

[@jinxxpwnage]

If you have im508 do you simply go from gbox to scanner? Instead of maxiflash to bluetooth? Or is im508 compatible with maxiflash for Bluetooth connection?

[@dashtyATG]

Hy bro was it compatible please?

[@jinxxpwnage]

well in terms of the gbox and gbox2 being compatible with im508 then yes. I've done a bunch of stuff with it. xp400 and apb112 also compatible with im508. 12+8 connector for bypassing dodge gateway for 2018+ also compatible. Do you have any info on all keys lost for nissan 2022+? the bcm procedure that zedful came up with i wonder if autel has something similar these days.@@dashtyATG

[@jinxxpwnage]

hi i think my comment was deleted. yes it's compatible@@dashtyATG

[@dashtyATG]

​@@jinxxpwnageyes sir do I have to disconnect the ELV or the ELV connector if I do it on the vhecle please? I really need an answer.

[@rogerbrandt6678]

Thank you.

[@moeakawi1826]

You dn't need blank key to get the password ?

[@Habbasio]

thankssir for showing clearly most then other guys .GODBLESS YOU. SIR EMULATOR GET 3 WIRES POWER GROUND & CAN?MAY YOU SHOW 3WIRESWHERE THEY ARE GOES.PLSFOR GIVE MY ENGIISH VERY POOR

[@CrucialSpeaks]

Is there one with doing the esl on the car?

[@dashtyATG]

That's what I'm looking for exactly, or did you figured out please?

[@jamesbarratt593]

You need cgmb on the bench for password calc of mercedes fbs3 keys. W204 as it ended 2014 I recon all were fbs3. The system cgmb is just fast at password calc.

[@erdalturker237]

Hi dear i did not make it elv emilator coding . Can you show me .how to connect elv emilator cable please

[@toiletclogger637]

Did you get an answer?

[@OscarHernandez-rj1dl]

Have a question? I tried to get the password but it skips it and generates the key

[@skankhunt-43]

What's the idea behind using an emulator exactly?

[@MobileEcoTuning]

If the esl goes faulty and you need to get your car to the dealership or just if yoy simply want to bypass

[@taz8436]

hi what emulator is this i have a im608 autel which emulator can be programmed using the im608 or any will do many thanks for your help and a great video

[@KhaledBeatz92]

How did you get the password?

[@mrdman094081]

👍👍👍👍

[@zymon.]

Can someone have me call them for tech-support? I am in a bit over my head in U.S., working on a W207 and says personalization failed. I have steering column removed and emulator on my bench with eis

[@EAUTO24]

Whats the cable that go from g box 2 to the simulator

[@InitialD15]

Comes with gbox so no need and it's db15!!!!!!!!!

[@citylocksmith3553]

Thank you for sharing man!

[@aplusautomotive]

Can we use a “used” EIS?

[@pashko90]

No

[@lukeh7854]

I’m pretty sure you can if you extract the data from the original and reflash the used one?

[@pashko90]

@@lukeh7854 yes, with data transfer its possible. But just grubbing a used components from another car will not work.

[@ReginalBronson]

@@pashko90 it can be cleared.

[@pashko90]

@@ReginalBronson yes, if you have a right tool. You can use renewed EIS, not a used one.

[@greggorysmith8727]

Can someone let me know who I can mail my esl and switch to to get them programmed and the cost please

[@ReginalBronson]

Still need it done?

[@greggorysmith8727]

@@ReginalBronson naw got it programmed

[@alaavannoura9449]

Haw do i connact the amulateor

[@alaabannourah7464]

I don't know how to connect the amuolater

[@jordanammanshmesani]

I usually renew eis .

[@zymon.]

Why renew instead

[@vanrysel7734]

not clear because the device is far a way

[@dannyxz6260]

Helpful but not thorough. The VCI needs to be BT connected and the programmer via USB in the same time!

[@A.E.Crawley]

YOU FORGET TO MENTION..NEED A BLANK KEY IN 2022 VERSION:)..OTHERWISE NO CALC PASS...

[@carsolution431]

Screen on tool in next. Nothing show ing

[@fs0c1ety_bs92]

It was already programmed tho heard the unlock sound

[@InitialD15]

Wtf. Someone didn't pay attention 🤣🤣

[@anythingwewant604]

Why can’t you do this in car

[@pashko90]

You can do it on the car.

[@fs0c1ety_bs92]

My guess is he programmed with cgdi or vvdimb this shit cant do emulators

[@MobileEcoTuning]

Your guess would be wrong. It was programmed with this tool. Before the video to make sure it all went smooth rather than tumbling on the video. Your guess is incorrect because you don't know how to use a tool. Many many people are using this tool to make emulators. I suggest your struggling which is why your looking at KZbin videos.

[@fs0c1ety_bs92]

@@MobileEcoTuning I manage to program original without any problem My problem it's when I try to program mk3 it cant even communicate....autel should document which emulators work with there product like what they did on be keys

[@fs0c1ety_bs92]

@@MobileEcoTuning at first I tried mk3 now um trying xhorse emulators all because they didnt document

[@MobileEcoTuning]

Xhorse work absolutely fine. Mini and standard

[@fs0c1ety_bs92]

@@MobileEcoTuning ok I am buying xhorse and try it and I will take my words back...sorry mate

[@e.k2801]

Loooks far away

[@canerkukisi7581]

if I use a used esl from another car do I have to reset it first and then write to the new one