[MOD GUIDE] NERF RIVAL HYPNOS (K26 Spring Upgrade)

I hope you enjoyed the Nerf mod guide for the Nerf Rival Hypnos. Hope this mod guide was helpful. Would you please a LIKE as it really helps the channel and don't forget to SUBSCRIBE, RING THE BELL for notifications and SHARE. KEEP READING FOR MORE INFO.
Subscribe Here: / naptownnerf
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-...
[Help support the channel by becoming a patron]
My Patreon: / naptownnerf
[Please follow me on the platforms below]
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
My Twitter: / naptownnerf
BUY HERE:
Nerf Rival Hypnos
Team RED- www.amazon.com/Nerf-Rival-Hyp...
Team BLUE- www.amazon.com/Nerf-Rival-Hyp...
K26 Spring - outofdarts.com/collections/sp...
Electrical Tape - www.amazon.com/3M-Scotch-Elec...
Mini Bolt Cutters (to cut K26 spring) - www.amazon.com/TEKTON-8-Inch-...
Super Lube
Small tube- www.containmentcrew.com/shop/...
Large tube (Best Value)- www.acehardware.com/departmen...
#0 screwdriver set: www.amazon.com/Topzone%C2%AE-...
Needle Nose Pliers (for bending and squaring off the end of the K26) - www.amazon.com/INDUSTRIAL-77T...
Music by / liqwyd
#nerf #nerfmod #nerfrival

[@ZolusProps]

Nice video! Glad you did this, all the gears and such make doing something like this a little daunting , a visual aid us such a help! Thanks for great consistent content!

[@WolfMan-nf4lv]

Sweet! Thanks for this guide! Honestly I'm not sure that power upgrade is worth the loss of accuracy, but nonetheless the video shows how to disassemble the blaster, and give us an idea of how we can improve the air seal and what not. Great video as always nonetheless! By the way how would one go about adding a pad to the plunger? Do you just use superglue or something to lock it down?

[@3d8bits44]

Thanks Dude! great job!

[@nafnnerf6486]

Love the review videos but please make another hardcore mod video. Love your work

[@northcraft1]

What about using a spacer?

[@norcalnerfclub3423]

I learned that trick of padding the plunger head from you. I haven't seen many people doing it. I think there are definite benefits to it. I swear my Hades and both of my Helios became more accurate after padding the plunger head. All of my Kronos are dead on accurate. Ace Hardware has really good ones. Both rubber or felt non skid pads. I've used both and can't decide which is better. Thanks much for this video! I'm sure I'll be putting it to use in the future!

[@diegovaldes3785]

What does it mean to pad the plunger head? And how do you do it?

[@norcalnerfclub3423]

@@diegovaldes3785 Inside the plunger head you'll see a bit of dead space. By filling in that space you maximize the amount of air being pushed against the round. You can find foam adhesive pads at any hardware store. The most common I use come from Dollar General.

[@ghostsniper6634]

Hey @naptownnerf what if your plungerhead breaks off for your nerf quadrot?

[@NaptownNerf]

Did you use the expoxy I put it the description? I would try to use a screw and washer possible.

[@AmericanFoam]

I love my Rival stuff, but I don’t really feel the need to mod them. I mean they’re awesome in stock games and hvz, but the accuracy just isn’t there with this ammo type for higher FPS mods. I appreciate the guide though. I was a little hesitant to open mine up just yet.

[@thehollowlingwin]

Oddly enough I've found the Hera to be the most accurate modded Rival blaster, just need to get a hang of the hop up with 3S

[@AmericanFoam]

thehollowlingwin I agree. I should’ve said Rival springers are what I don’t mod. Hera is really sweet in 3S, and the Nemesis too of course!

[@thehollowlingwin]

@@AmericanFoam Hard for me to gauge the accuracy of a 3S Nemi when my only experience with it is seeing the hail of balls flying towards me 😂

[@jakedc1997]

Modding the full auto stuff for better RoF is worth it dependinh on play style. But the FPS mods don't get much better results and like you said the accuracy isn't there.

[@CelticViking57]

Thanks for the mod guide. Where do u get k26 Dont know what website to get it from

[@Korviliath]

He's got links in the description.

[@CelticViking57]

@@Korviliath ok. Sorry, couldn't find it. I'm losing my eyesight

[@JohnSkillet-mg8rc]

That black rubber bit I believe is called the o ring.

[@JohnSkillet-mg8rc]

Jeez yall need to go to Wal-Mart and by a life so u got better things to do than cuss out random people. I mean come really u that low?

[@JohnSkillet-mg8rc]

Well thank u for the apology at the time I was new to nerf rival and clearly this dude was too cause he didn't know what it was either.

[@watertakken]

Forget this blaster. Apollo way to go- better to shoulder and very accurate. More kills.

[@ninjashoyo2062]

Bro what are you talking about you can’t even shoulder that thing very long without it eventually getting annoying

[@ikonace2818]

I hav both and they're equally good.

[@sergeantsriracha8295]

We need a nailbiter mod guide ! There is only one out so far

[@davedoesthingsdreaded]

Yes we need a good mod guide for the nailbiter. K26 is not the proper spring for the nailbiter. I appreciate naptown Nerf and his attention to making sure he has all the correct materials before beginning to do a mod guide. It's good especially if you are a beginner modder to see everything they need in place. It's important when making a video for everyone to have a good visual aid when modding. I know I appreciate it and everyone else should. I like how well thought out your videos are. I can tell you don't rush out a video just to make a couple bucks in add revenue. Seems like a lot of Nerf KZbinrs rush out videos that aren't that good of content for money I guess. I like that your videos have substance. I'm sure it is not that easy to do when your making videos about toy blasters but you do and you deserve to have many more subs then you have. You should a lot more. Your channel is better then most Nerf KZbin channels. I mean it. I may be critical to those with more subs but that's because half the videos are just boring. Keep it up man. Keep doing solid mod guides because some of us get it

[@bendydevil4935]

I was trying to repair mine.

[@DEVILISHLY_DELICIOUS]

Has anyone modded the hypnos to shoot 2 balls?

[@ghastgamer3604]

3rd