Modding my 1959HW PLEXI to EVH Specs | Variac, 6CA7s, Fat Cap etc.

[@LeonTodd]

This might be the coolest video you've ever done. Also, the video length being 51:50 is icing on the cake.

[@EugeValovirta230V]

Thanks man! Yeah I didn’t notice that until someone pointed it out 😎. What a coincidence 🕺.

[@Robstafarian]

Fancy meeting you here!

[@adampoyser9631]

I love the faces you make around 16 mins, where you realise ‘damn this mod sounds epic!’

[@ShreddingFinn]

you have to have the best most consistent tone of all the amp guys on KZbin

[@EugeValovirta230V]

Thanks!

[@joehernandez6260]

Yea he does 🤘🏼

[@OneHandleToHandleThemAll]

Both amps sound insanely good. Like easily among the best sounds I have heard.

[@EugeValovirta230V]

Yep

[@stopUkrainewar666]

18:49 this guy is happy 😂

[@RennerGutierre]

Fantatic video. That goosebumps all good tube amp gives us. Sharing all the details of that mod is generous! Thanks for that. Huge sounding amp, and it's great that it has a different tone from bad boy. Now, you have two monsters! Btw. What a fantastic riff!

[@EugeValovirta230V]

Glad you enjoyed it! Thanks!

[@theirritatedirishman5440]

After Mod with pedal sounded insane but even without the SOD it was so natural and raw sounding! Very cool

[@Gibsondude]

I just started watching your channel. You're playing is amazing. I will have to check out your original music. Either way Plexi all day!

[@EugeValovirta230V]

Welcome aboard! Thanks! Really glad to hear!

[@Hairyloft]

Sold me on modding your plexi to Evh spec, just sounded immense. Such a great vid thanks!

[@EugeValovirta230V]

Thanks!

[@MrBikboi]

Your tone is always phenomenal, love that sound.

[@EugeValovirta230V]

Thanks!

[@gabrielstevens41]

This was a fun ride. I just sat and watched this video and tried to dial in the plexi in the helix to match it. Might become my new live sound.

[@EugeValovirta230V]

Cool!

[@scharrface]

This sounds awesome! Killer sounds man, always look forward to hearing the tones you put together

[@EugeValovirta230V]

Thanks! Glad to hear!

[@FlyingMachete]

Super interesting video, you shape your tone like no one else dude! All about Marshall this one, funny enough the total time is 51:50! 😊 Wish you'd go over those amps too on future videos! Keep the good work brother!

[@EugeValovirta230V]

Thanks a ton!

[@BradRocker]

Love those old Marshalls. 🤘

[@EugeValovirta230V]

Me too 😎.

[@rikm2625]

super cool! glad to see the changes and what changed! Rock on !

[@EugeValovirta230V]

Glad to hear! Thanks!

[@markkinney5030]

I wanted to share this about the pre amp tubes you have in your amp now! I liked them so well that i got the same tubeamp doctor ECC83 CZ in my amp it is not a Marshall amp but i have a Blackstar and it really open it up a lot! Its has that JCM 800 tone to me way better. Thanks man

[@EugeValovirta230V]

Cool man!

[@RobertBakerGuitar]

I'm actually about to do the exact same thing to mine! This sounds sooo good.

[@EugeValovirta230V]

Cool man! Yeah!

[@chandlerclement1365]

Amazing video, awesome to see how each part makes a difference, one by one

[@EugeValovirta230V]

Thanks!

[@caopgtr]

thank you euge! Its so intresting!

[@EugeValovirta230V]

Glad you think so! Thanks!

[@ORShenanigans6186-c1x]

I just placed my order I'm getting the new release CD and t-shirt bundle. Said it would ship as soon as it is released, I can't wait! Thank you👍🏻

[@EugeValovirta230V]

Awesome! Thank you!

[@johnwardle9667]

Love it. Huge fan. Thank you thank you.

[@EugeValovirta230V]

Glad you enjoyed it!

[@mikeptacek2190]

wow really cool vid. all the questions I had floating in my head on how to bring a stock plexi closes to early VH, put to practice, a great help! curious what another OT will do. a myth or not huh, keep up the great and entertaining vids :) thx!

[@EugeValovirta230V]

Great to hear! Thanks! Video about the OT coming in the near future.

[@tiboorens4831]

Love the song!

[@EugeValovirta230V]

Glad to hear! Thanks!

[@tommyricheymusic4445]

I stumbled upon your channel and I really dig the information you are sharing . I was debating buying the EC -1000 with the Pegasus/Sentient pickups because I have never heard it in person had only read about it and heard some ok demonstration. After hearing you play it with the Friedman Runt I was convinced it was the next guitar to buy for my six string metal arsenal. I have the Maxon 808 but to me it alters the natural amp gain so I am interested in trying the Boss Super Overdrive with my Landry LS100 G3 amplifier. The Boss Super Overdrive works well with your "Bad Boy" Marshall JCM 800 because it does not change the amp natural sound. It just makes it bigger! I dig the 1959 HW Plexi EVH mod!

[@EugeValovirta230V]

Cool man! Thanks! Really glad to hear!

[@noremak57]

it just hits more and more on the fact that all his amps sound like him. also its crazy he doesnt have more subs

[@markkinney5030]

Okay! That amp sounds really good. I can tell the way you were playing it you were having so much fun.I have a new name for that amp! The Bad boy Plexi. I like that! Any way this video was so cool watching it. Rock on Brother.

[@EugeValovirta230V]

Yeah! Thanks!

[@tremdoctor007]

I agree on the Fair Warning album. Try your Boss GE7 EQ, adds just the right bite. My best pedal

[@zigballiveguitar]

Awesome tone and playing bro.

[@jeffallen3382]

Pick up some GT-7025 preamp tubes! When I replaced mine to those, it was like someone lifted a wet blanket off my speaker cab! It lifted the hair on my arms when I first heard it! It was that big of a difference!

[@AndorMatus]

"Bad boy" 😀 Sounds like a dream.

[@EugeValovirta230V]

💪😎

[@dalejacksonmo]

Sounds amazing and you play great as always

[@danr2081]

My first thought after the 1st mods was, sounds like the Bad Boy🤘🏼💪

[@EugeValovirta230V]

Quite different but I guess it’s in the ear of the beholder 😎.

[@K707OR30]

Fun video. The 1959 sounds great! Also, Erik definitely knows his stuff regarding amps. As much as I love Marshalls, Erik is right in that a lot of the components they use tend to be garbage even in the higher end amps. Glad he got those silver micas out and did a few other things that’ll help keep the amp in better shape. Erik is the unsung hero of this video for sure!

[@EugeValovirta230V]

Thanks! He is awesome!

[@fastnewbie]

I've enjoyed this JMP upgrade journey with you. Was awesome that you took the time in between each upgrade to play with explanation, but also your explanation of what you felt and heard. I always learn something from all your videos, and appreciate the details and nuances that you bring. Now that the Plexi has sound variables if you need, what name will you use, maybe 'Bad Plexi', 'Beast', or 'Bad 160'. Keep up your awesome videos and music! 🤘🤘🤘🤘🤘🤘 ps. was cool that you shared goose bumps when you hit that awesome tone you wanted.

[@EugeValovirta230V]

Thanks! Glad to hear this!

[@Murphy_R9]

+1 for a Better Transformer! 🤘The transformer is the Heart of the amp and a good old school Drake style one would fit that amp well! Not the biggest fan of the newer MIV ones. It does however sound very good as is.👍

[@EugeValovirta230V]

Yeah!

[@grimmmstudios2367]

Enjoyed the journey, almost as deep as the Pete Thorn one. Just a comment though, surely using an EMG as the main pickup is a bit deceptive? Funny how we all think we know how Ed got his sound isn't it. I just got a SV20, and it does the plexi thing, but I must confess my old JCM 900mk3 is just as much fun, and the 5150 OD has that sound as well as a noise gate. Room plays a lot into the sound as well, Ed did it in Sunset sound with 2 cabs and a drummer.

[@EugeValovirta230V]

Thanks! I’ve used EMGs since 90s and like them a lot and you know what they say: ”if it ain’t broken don’t fix it” 😎. It’s all about personal preferences. I didn’t know specifically what Ed used; I just told Eric what I want sound & feel wise and he suggested similar things what Ed apparently used and I was just like ”sure lets check ’em out and if I like them we’ll keep ’em. And i did 😎.

[@Squall6575]

I love that tone! I prefer to keep my plexi stock to keep the cleans and OG tone, so Ill stick with pedals and boosts, but this is so great!

[@EugeValovirta230V]

Cool! Whatever does the job the best to each of us 👌. I really liked it stock but wanted to have a bit more of this and that 😎.

[@Squall6575]

@@EugeValovirta230Vwho knows maybe one day I might follow your lead and do the mods too!😂

[@visionaire101]

Woww fabulous soud from the plexi .... but the riff ......... so huge ....... Great Video mister ......

[@EugeValovirta230V]

Glad you like it! Thanks!

[@hootowl6354]

I read an authoritative piece on Eddie's use of the Variac. It said Eddie didn't use the Variac to change tone. He used it to reduce volume in smaller venues.

[@EugeValovirta230V]

Yes 👌. And it changes the amp’s behaviour & tone while doing so (reducing the tone).

[@DDGaming-z3z]

I LOVED both with and without the SD-1, but as an former plexi VH 1-84 devotee, I actually liked the amp stock without the SD-1 and would have loved to have heard you play that track, double-tracked and panned wide-left/right. Just seemed like you were attacking the strings harder without the SD-1. To be fair, would have also sounded cool to blend the SD-1 track in center during the tapping part, but alas... You are wonderful and love your content!

[@andyhayes7828]

Dude, GREAT tone/s as always ! I like that guitar, and I truly believe that a top mounted floyd sounds better than a recessed one 👍. Also, those Modern construction Warmoth necks make ANY guitar sound better ( I believe its the extra metal used in the truss rod construction). The tone is so articulate and precise. Both amps sound awesome, but I prefer the fact that with a 2203/2204 circuit you can use an effects loop and get at nice delays and reverbs since your not satuating the phase inverter and output/power section. With a 1959/1987 you have to use extra stuff to get at the delay/reverb ( like reamping with another head and load box or a Powerstation, etc). I LOVE the simplicity of using ONE good Amp ( 2203 or 2204) 🤘

[@EugeValovirta230V]

Thanks! My old 800s doesn’t have a loop 😎. But I use everything in front anyways. Old school you know 🕺.

[@JoeDirt-ok2hm]

Sounds good, I’m in the middle of modding my origin50 to a hot rodded jcm800 with Jose mod

[@gktde9874]

Euge 🎸👑

[@vkuolema79]

You know i was messing around with those mods a few years ago and the best "brown sound" was achieved by using those "mustard caps". It gave me the impression you had a "sd1/ts-9" on focused on mids/high midswith not so much "high end" running in the background and had decent sustain. The metal film caps give a good clear sound but not as dirty as the brown sound. Those old mustard caps did the trick for me. I can't find those in Finland i had to tear down an old hohner german amp to get a bunch (and i still have plenty left)

[@EugeValovirta230V]

Cool!

[@vkuolema79]

@@EugeValovirta230V also running a GE-7 with a "bells curve" mid boost added extra crunch and sustain

[@riangarianga]

Now I got what I heard in interviews, that back in the '80s people disregarded the new JCM800 as being kind of thin and shrill (that's what they said!), while the Plexi had more bottom end roar -and it could be bought second hand for peanuts.

[@Gibsondude]

Back in the '80's I ran a JCM800 with a Marshall Power Brake. Sounded pretty thin. Plexi more bottom.

[@riangarianga]

@@Gibsondude So interesting, you were there!, while I still was just a little boy «playing» my tennis racket. 😁 Did you also try the Plexi through the Power Brake? Has your opinion about the JCM800 changed all these years later, since every piece of gear has evolved?

[@robertkidd6270]

I had a Jcm800 in 84 had no probs with sound or reliability . I do have a 73 jmp 100 and an old Marshall powerbreak. It sounds very good too but it's a louder amp and I prefer going straight in with my effects. It's just has the sound of my fave guitarist's and that's just fine for me lol.. I have a 67 bottom cab too which I've used for all my gigs and amps from peavey jsx and 5150 comb to a fender champ 12 combo

[@EugeValovirta230V]

They must’ve had really bad 800s. Or completely different than mine and the tens, probably hundreds, I’ve played throughout the years.

[@riangarianga]

@@EugeValovirta230V Exactly! You just showed there certainly is a little difference. But there's no way anyone can tell the 800 sounds bad compared to the Plexi (I personally love both amps!). Thanks to your comparison I understood it, now I realise it probably was just exaggeration and BS (maybe because these people couldn't afford a new 800?). To me another guitar myth was debunked.

[@geezberry8889]

the sylvania 12ax7wa preamp tubes part of the equation as well as B+ voltage at the 82k/100k junction

[@TheUndeadUnicorns-666]

Nice 👌

[@EugeValovirta230V]

Thank you! Cheers!

[@RiloRox]

This plexi is so chunky holy shit! Also hyvää pääsiäistä!🐰

[@EugeValovirta230V]

🕺💪

[@jamescarpenter4777]

It would sound really good with a jb in the bridge. Passive is where its at for VH tones.

[@EugeValovirta230V]

Yes. I was just looking to improve my tone 🤟.

[@demokraatti]

The beat tones. I think that Bad Boy should feel threatened by this set up.

[@someonehadtosayit2566]

I’d really like to see you demo what has now become the 90’s metal collectible Marshall valvestate 8100 that was used on a lot of albums at the time. If you can find one in good enough condition at the right price, nab it. You won’t be disappointed especially in its 2nd gain channel. Wasnt your typical valvestate either.

[@ovyone5474]

I wonder why marshall dont release these as reissues hot rodded by the techs! Possibly where the jcm800 kicked off! When you changed the powertubes i didnt like it as much, i'm sure in the room it was better! Still sounded pretty bloody good though! Alot of homework there! Thankyou for posting this! Awesome!

[@donsmith5385]

The output transformer will be huge! The JCM800 has old Brit Transformer in it, you will be shocked!

[@EugeValovirta230V]

Cool!

[@Sticky_Tea]

That video length 👌🏻 was that on purpose? 😄

[@Sticky_Tea]

Great timing for an easter egg 😉

[@EugeValovirta230V]

Nope 😎.

[@gtrman69777]

I didn't even catch that. 😁

[@bvanhoosen]

I watched all 51:50 minutes of this. Highly recommend the Mercury Magnetics transformers if you end up swapping it

[@EugeValovirta230V]

Cool! Thanks!

[@Johan-fe8op]

Ai että ku aina yhtä hyvän kuulosta lankun käsittelyy🤘🔥😎 pelxi on kova ja tuon modauksen jälkeen nii!👌👌 Omast setist löytyy JMP 2203 -82 joka on🔥🤘

[@EugeValovirta230V]

Hianoo! Kiitos!

[@christopherrodriguez1276]

Ya at 16 min ,he loses his shit and goes into the zone ,,FN great. Luv it

[@tah5w]

Awesome video. Would be cool to set up a stereo rig with Plexi badboy L, and OG Badboy R

[@EugeValovirta230V]

Thanks!

[@aquilarossa5191]

It's becoming a bad boy? The Bad Brother ;) Those ECC83Cz tubes are JJs. The Cz stands for Czech, i.e., where JJs are made. TAD does not make tubes. They buy tubes and grade them for quality etc. Then they rebrand the ones that passed their tests. They source from JJ, New Sensor, and China etc. Groove Tubes do much the same thing. Dave Friedman reckons those new Psvane tubes from China are getting good. I am keen to try them. Vintage tubes can be hit and miss, but sometimes can be unbeatable. Most of the ones I have are not clearly better sounding than modern ones. One is though. A Phillips Miniwatt. Nothing else gets close to how good that thing makes my amp sound. I do not use it though. I want to look after it, so some good examples of vintage tubes are available for people in future to hear (same with my Sylvania 6CA7 tubes). P.S. If you do change the OT, Marstran is a good shout. I have their iron in my 50 watter. It slays. It does sound very old school though. The other is Classic Tone, but they went out of business. BTW. Now you need an Explorer or Destroyer with an Ibanez Super 70 or Dimarzio Super Distortion pup in it. It will sound mega Eddie with that amp. I always thought I was more into Randy Rhoads, but it appears I have been down the EVH rabbit hole too huh. The tone that has my ear lately is neither. It's Rory Gallagher's lead tone in a song called Bad Penny. Vox and a treble booster I guess. It is so awesome.

[@EugeValovirta230V]

😎👌

[@eduardosci1909]

Dagnall transformers? Btw, amazing job and killer tones! Thumbs up, of course!

[@EugeValovirta230V]

Whatever Eric suggests 😎. Thanks!

[@Amp_Expert]

now use a Jose load box n output from amp into loadbox with resistive load and transformer with variable level control to adjust output and slave into second JMP Plexi or HH Power Amp with Greenback speakers like Ed did to finish the formula!!

[@EugeValovirta230V]

😁

[@SouradeepSBK]

As usual great video Euge 🔥 I guess the reason why JCM 800 exists is because Plexi by itself is pretty much unusable without added gear or modding.

[@EugeValovirta230V]

Thanks! Oh not at all. It’s awesome as bone stock but I just wanted to improve it a bit 👌.

[@SouradeepSBK]

@EugeValovirta230V Yeah, I think I could've said it in a better way. Basically, I mean to say that after modding it, the Plexi just becomes a different beast. Anyway, cheers!

[@EugeValovirta230V]

😎👌

[@renebauch9316]

Hello euge, nice to see you enjoying your modded plexi! I'll have to say although i like plexis played by others i'm more of a jcm800 guy. But, as you said in one of your videos, plexi really punches you and cuts well through a mix. I see you have a fryette powerstation in your rack. Do you prefer this over the suhr? I'm currently in the market for one and can't really decide on one. Sadly i was only able to test the suhr and a driftwood load which where pretty close to each other. Have a nice day!

[@EugeValovirta230V]

Thanks! Suhr isn’t an attenuator but ”just” a reactive load (really good one) and Fryette is both and I use it only to attenuate the output level a bit before hitting my cabs👌. Likewise!

[@stopUkrainewar666]

HUGE VAltorta this man make the legend advancing !!! And understood by the boomers... who said !!! Nah plexi i wanna keep it natural 😅

[@TheChingazo]

Imo, i always preferred the plexi to the 800. I bought a Boogie 90w Mark V just to get the Edge mode after your video a while back. I would love to hear a comparison with a Friedman BE-100.

[@EugeValovirta230V]

🤟🎶

[@theirritatedirishman5440]

It cut through with the SOD but without it much fuller sounding

[@tiboorens4831]

🤘

[@EugeValovirta230V]

🤟

[@univalve1]

i am surprised you could stand to play it without the bias fixed. the cross over distortion would have been substantial with a bias that low from the 160 volts. i went from 125 volts to 110 volts and my bias dropped from 70% to 54%. that first mod was nice

[@Alvin_C_York]

Video length, 51:50 🤘🏻

[@EugeValovirta230V]

😎🤟

[@GCKelloch]

The JJ 6CA7 have a harder sounding crunch than the old Sylvania 6CA7 ( I had a pair in my HiWatt back in the 80s). The EHx 6CA7 are softer than the JJ. You could try just a pair of the EHx and plug the speakers into half the Ohm rating. It's safe. EVH switched to 50W plexis anyway. It reduces the "woof". What preamp tubes you have? They matter more than the power tubes.

[@kazabubu10]

The Plexi can only be “the bad ass” or “the bad grandpa”....😂....nice inventory you ve build there...🤟🤟🤟

[@LB-pp7pu]

Hello, what model of Variac you suggest to buy?

[@dracul9166]

There's a guy here on YT called Michael Audette that does an UNREAL Van Halen mod for Plexis, a lot of people get VH's tone so wrong, this guy nails it. Check him out and wait until he starts chugging Unchained, you won't be disappointed!

[@chrisstevens4680]

You could have saved a lot of time and effort by just turning it up to 11 !!🤣 Seriously though, it sounds epic. What does your amp tech think of using a 12AT7 in the phase inverter position? (PS if you haven’t seen the film ‘Spinal Tap’ then “turning it up to 11” won’t be quite so funny!)

[@EugeValovirta230V]

😁😁😁. It doesn’t drive as hard as AX7. I like AX7.

[@chrisstevens4680]

@@EugeValovirta230V Yes I know, but the 12AT7 delivers more current to the o/p tubes and I wonder how that affects the distortion, clarity and tone overall. From what I reading last night, the phase splitter is being distorted. Maybe there would be better distortion generated in the o/p tubes. Just a thought! I’m building a 50w Plexi so your video is REALLY useful thanks! I will experiment a bit later. At the end of the day, turn it up to 11. 🤘🤘😎 PS I love the track at the end!

[@mrhyde2250]

I kinda prefer the unmodified version. It had more “air” to me.

[@Murphy_R9]

Even with the modded version getting that "Air" back would be simple just by backing off the gain some. I also prefer a passive Humbucker but that's just me.

[@EugeValovirta230V]

It’s all about personal preferences.

[@mrhyde2250]

@@EugeValovirta230V my buddy and I watched it separately and we agree that the modded version had more of an Eddie vibe, and the Unmodded version + the SD-1 would be excellent for jamming Ratt or Ozzy tunes.

[@aristocaster]

I would do the same mods to Plexi.

[@eeroholkeri7852]

Those black "silver mica" caps your tech mentioned can sometimes cause annoying unexpected problems... "Silver mica disease" ... Those parts propably weren't even invented when fourholes were originally made. Typical symptom is audible - the amp begins to crackle like a dusty vinyl player after the amp warms up and temperature inside chassis rises... One easy fix is to put a for ex. 0.1uf coupling cap before the tonestack circuit ... Improves reliability...

[@Polentaccio]

What caps would you go with in place of the mica's? I used them in a few builds or mods i did on my own amps mainly because they were available but I find them a bit sterile. No MOJO if you will.

[@nicholaskname7735]

I wonder how a Bugera 1960 Infinium would sound with these mods?

[@Gblackie13]

Plexi has that kraaaa of the 5150...

[@EugeValovirta230V]

Yep 😎

[@FransvandenBergeMuziekschuur]

Was Eddie not using 6550 tubes?

[@EugeValovirta230V]

6CA7s in his Marshalls and 6L6s in Peavey & EVH 5150s.

[@FransvandenBergeMuziekschuur]

@@EugeValovirta230V Thank you.

[@christianutter5383]

Wait, when did you get another SISO?

[@EugeValovirta230V]

A while ago: kzbin.info/www/bejne/pHjRf4eQlKp3jqcsi=-WwRDexLwCDM4jGW

[@doctoribanez]

Have youmever put the 24v battery in your emg 81 ? I would like to hear the riff with it. Not saying it sounds bad without it , it just sounds different i have went back and forth over the years

[@EugeValovirta230V]

Nope. I haven’t found the need to even try. ”If it ain’t broken and sounds great there’s no reason to fix it” 😎👌.

[@RomanRotten]

I don’t think the upgrades and mods worth money, the amp stock is already killer and with the sd1 help it’s a beast!

[@EugeValovirta230V]

Can’t argue with personal preferences.

[@RomanRotten]

@@EugeValovirta230V I'm actually bluffing, I’d like to mod my Studio Vintage 20 to give it a tad more ;)

[@EugeValovirta230V]

😎

[@gainmeister4505]

Your missing the jensen d120 speakers, they're like half the equation.

[@EugeValovirta230V]

Oh no I’m not trying to sound like Eddie. Just my Plexi sound in my head.

[@Gblackie13]

Those TADs are JJs as well...CZ is czechoslovakia...where the JJ factory is...

[@EugeValovirta230V]

Yes 👌. Those just sounded better this time than half dozen (labeled) JJs I tried 😎. Actually the first time for me.

[@JohnWiku]

TAD orders tubes from all manufacturers, and they test, sort and matches them. TAD doesn't make tubes.

[@PandemiuM-gtr]

I think that for the clean tones the roland jc is for you. And for lead... soldano. With plexi and bad boy, panned, you have the rhythm section 😂

[@EugeValovirta230V]

I use my ADA MP1 mostly for ”crystal” cleans. It’s solid state clean channel is basically a Roland JC and I prefer original 5150s over SLO.

[@themodernguitarist]

Euge did you purposefully make this video 51:50 long? lol

[@EugeValovirta230V]

No but kinda cool right 😎.

[@RapttorX]

was about to ask the same thing ... funny stuff

[@kalleankaa7536]

Hmm interetskng. I could have done for you roccaforte mod, 4gain stages without extra tube. Can also do 4 and 5 gainstages with extra tube. And work from there. That ptp circuit is tasty to mod. Also. Jj preamp tubes are no go in tone with marshalls for that 80s tone. Chinese and sovteks sounds better. No need to do the crossover distortion checkup. As crossover will give you odd harnonics.

[@EugeValovirta230V]

I’m good with Eric and he gets the sound & vide in my head but thanks anyways.

[@kalleankaa7536]

@@EugeValovirta230V opinions aside. Your tone is good. But you lost lots of sting on the high strings. Just saying.

[@EugeValovirta230V]

👍🎶

[@gravyblue]

Sorry to say, I think stock sounds better. More bark, more bite, less compression.

[@TheBlackSheepBoy]

Geralt of Riffia

[@bonzology322]

The jumper uses both the A and B stage of the first tube, pulling the jumper gets rid of one side=fail

[@EugeValovirta230V]

But if it sounds good it's good ;-).

[@ThyFinalPain]

I know you probably couldn't care less, but is this Plexi one of the new Marshalls with Made in Vietnam Transformers? Edit: it's from 2023, so it has them.

[@EugeValovirta230V]

Yes

[@dspencer1201]

Time length of vid ... I see what you did there

[@EugeValovirta230V]

It was actually an accident but a good one 😎.

[@bonzology322]

Rebiasing at 90v/160v is exactly NOT what Eddie did, and Dave Friedman has said both, but he’s selling amps

[@EugeValovirta230V]

Yeah that's fine but this amp is/was modded to my preferences ;-)

[@univalve1]

i thought you were saying meat pot. i thought wtf is he talking about meat pots for. hahahahaha. im a dumb ass

[@albecenex4890]

the tone is much more distorted than Eddie used in his amps (VH I- VH II- diver down period and the others from the plexi period). It's a nice high-gain distortion, no doubt, but it has nothing of Eddie's tone-just listen to the isolated tracks (for example - beautiful girl - can be heard here on youtube). On a quick listen I hear too much gain on the preamp tubes, typical of modern high gain, perhaps similar to the late 5150 amp...but far from a natural overdive plexi. With too much distortion you lose attack and harmonics. Distortion must come from a synergy between preamp and power tubes. I love Eddie very much but I didn't like his tone at the end of his career either. this is a little better than the last 5150 amp I heard, but still with this excessive distortion it lost the plexi character.

[@neuralfraud]

of course the video is 51 minutes and 50 seconds in length.

[@benburnett8109]

Glenn fricker says without A/B tests and graphs we can't believe anything you say. Glenn says that ONLY the speaker makes a large contribution to the tone. So; according to Glenn, you have wasted your money by not buying speakers from Mojotone because SMG channel is sponsored by Mojotone. And I know this is the Gospel because Glenn uses the F word and he screams. So we know he is telling the truth.

[@EugeValovirta230V]

😁😁😁

[@richardpryor2981]

KZbin.com/@EugeValovirta230V which one would you say has more growl?

[@MiroslavDubjak]

👍👍👍👍👍 ⭐⭐⭐⭐⭐

[@EugeValovirta230V]

🤟🙏