10:32 to anyone who was wondering what sir arijan did here this is the explanation first place the cursor on the vertices as shown and then make sure that your pivot point is set to 3D cursor and now if you try scale then shift+x you will see that when you scale the vertices move toward the 3D cursor and if you press 0 it will be perfectly placed on the 3D cursor then all you have to do is merge them with M
@ahad193154 ай бұрын
Still can't do it bro.
@ahad193154 ай бұрын
did it
@franck-allennguyen9751 Жыл бұрын
I've been struggling with the stock shape for a long time. Restarted the model countless time :) It's cool to see a different approach about this weapon ! Thank you !
@ciciciaphascain41432 жыл бұрын
Bro your channel is hugely underrated I hope you get recognize you deserve
@Autaka-Nubia8 ай бұрын
great tutorial and explanation because i'm a beginner, lesson 1 is over very well, thanks so much MR.Aryan
@mist50232 жыл бұрын
your videos are incredibly helpful, especially for an intermediate modeler like me
@juanseverino56512 жыл бұрын
Dude I love your workflow and the way you explain the procedure, man your good. Excellent.
@AntiNoobDefence2 жыл бұрын
All your videos are excellent quality
@ArijanRace2 жыл бұрын
Thank you, I appreciate it
@disappoynt68372 жыл бұрын
This is actually so well made!! Well done!!
@abbasgaming.1 Жыл бұрын
You are really skilful bro we have to accept it🎉
@amazeballsgaming3770 Жыл бұрын
The gap in the bottom of the stock is so that the hinge at the top can be used to fold the stock for traveling. Dope model !!!!
@jacobpersi28212 жыл бұрын
Just found your channel, great stuff!
@ArijanRace2 жыл бұрын
Thank you, I hope to see you around!
@uroborosfirst5637 Жыл бұрын
Dude, thank you SO much! I'm new in blender modeling so any video is helpful as hell!!!
@MarketAndChurch2 жыл бұрын
This was awesome, I look forward to part 2.
@ArijanRace2 жыл бұрын
Coming soon, thank you.
@channelname862310 ай бұрын
I cant convey how much I've struggled with laying out the topology for gun handles that have the complex stocks, but something clicked here where I've got it now. I would have liked to see how to add minimal topoloy rather than a lot of loop cuts but they may even be necessary so I can't complain. Edit: its ctrl + right click, you threw me off with the ctrl + left click at 3:00 , got it now.
@ЭДЭ5 ай бұрын
why extruded edge returns back to its source with this hotkey? tried both ctrl with left and right clicks
@maiwindows2187 Жыл бұрын
man you make this look so easy, what a pro. Thanks so much for he content
@DidierThePenguin7 ай бұрын
16:20 you don't need to make 5 loop cuts! Just make 2 loop cuts and scale them to the X axis and make sure to select "median point"
@lonelylama52227 ай бұрын
It was just faster and he deleted all of the loop cuts so it's fine.
@DidierThePenguin7 ай бұрын
@@lonelylama5222 oh alr
@gabrielemazzeo98212 жыл бұрын
Awesome tutorial, really thank you, I love it. Simple to follow, and I can see all of your steps. Good job. Could you do a tutorial for other types of guns, someday? It would be really helpful.
@ArijanRace2 жыл бұрын
I will definitely continue doing similar things. Thank you
@valdoltra Жыл бұрын
Shift +A -> Circle -> Align with the View? Life hack :)
@ArijanRace Жыл бұрын
It only works right after you add it, not later unfortunately
@Gaming_channel808 ай бұрын
How did you connect the second part of the weapon butt to the first after using the mirror modifier?
@crossdoe37732 жыл бұрын
I wish to see more gun vidoes for we gun lovers. And dont forget to consider various levels of learning when doing the video. thank you very much
@Daniel3DHLP Жыл бұрын
Thank you
@chchchch5552 жыл бұрын
sir, in 10:32 you do something that i dont know. i see that you type shift X. Does anyone know what he doing in 10:32 (shift x)?
@ArijanRace2 жыл бұрын
Here, I am scaling the selected vertex down to move it to the 3d cursor, but I only want to scale it down on the Z and the Y axes, and not the X axis. So I press S to scale, then I press Shift + X to exclude the x axis in the scaling. You can also use this when moving an object with G. Try it out with the default cube.
@aesofficial_87552 жыл бұрын
Great job Sir, keep it up and we would like to see more weapon tutorials in the future. Greetings from Holland
@razern4208 ай бұрын
For those whose having duplicated vertex problem , please do merge by distance , it gives me like 2-3 hours to figure that out
@misterymisterio87786 ай бұрын
Are you using quad remesher or something similar?
@Zeusovich91 Жыл бұрын
Hey man, i don't know how to add the curve on the handle like you, still new to blender, what im talking about is on the handguard you selected the front and back faces, then you scaled them which made a curve, if anybody could help i'd appreciate it!
@erosdavidvillarroelrodrigu8942 жыл бұрын
Great video! where can i get the reference photo?
@ArijanRace2 жыл бұрын
Just Google L115 or AWM, or the name of any gun you want to model. Most pictures will be from the side and you can use them as a blueprint. Additionally, just add "blueprint" to the search if that's what you're looking for. Thank you
@erosdavidvillarroelrodrigu8942 жыл бұрын
@@ArijanRace thank you!
@AspandDos12 жыл бұрын
Arijan please create patreon page! I would support your channel. Thank you for great content. Fast, effective and short videos.
@ArijanRace2 жыл бұрын
I already have a Patreon page, where you can download all the models that I make on my channel. I am putting the link in the description now. Thank you for the support!
@ВоваСем-и8н2 жыл бұрын
awesome, very nice work. Repeat this now))
@Mr.McWatson Жыл бұрын
What is this snapping trick he's doing at 10:40 with the 3d cursor? I don't know it.
@goddusubhadra413610 ай бұрын
Bro really spr
@3DArtist-q6n6 ай бұрын
wonderfull awesome
@agedjizz33802 жыл бұрын
The truth is that the unknown scares all of us, but we just have to practice so we can get well with the software.
@unknowncmd Жыл бұрын
I need help ! So I created the part with the circle and make the trigger guard. Once I ran out of vertices I got stuck. I am unable to add new Vertices. My mouse broke and I’m on Mac trackpad so I’m not sure if that’s a problem but I cannot add any vertices/vertex using it. To make matters worse when I went to extrude the little bit that I made, (as a test) it was on an angle….. I have no idea why or how to fix it :(
@rinyas2 жыл бұрын
Is the model going to be available to download by the end of the series?
@ArijanRace2 жыл бұрын
That is a good idea, I will consider that possibility.
@Josher-p9r5 ай бұрын
How do you get your reference sir?
@oddballlenny37509 ай бұрын
I didn't get the option to do the loopcut on the inside of the magwell. Anyone know why?
@Rojfos2 жыл бұрын
nice
@Sev07Sniper.2 жыл бұрын
No matter what I do i keep getting ugly creases on the rear of the stock
@tommyzimmerman20817 ай бұрын
i second this problem
@r3wr2 жыл бұрын
How do you ''Flatten it out'' for example 4:07
@ArijanRace2 жыл бұрын
I just scale it to 0 on the Z axis. If you want to flatten it to an exact height, you set the 3d cursor to that point and use the 3d cursor as a pivot point when scaling to 0.
@r3wr2 жыл бұрын
@@ArijanRace Oh alright, thank you very much. This is very useful. Great content, have a good day.
@MohamadAlabid-f5j8 ай бұрын
Hi aryan i reached the moment 11:30 but in do subdivision surface their's some glitches in some loops plz plz plz how i can fix it
@CadenajkflАй бұрын
try deleting doubles
@p4nkcakes728 Жыл бұрын
can i do this with other guns
@hammody1723 Жыл бұрын
What poly would this be considered as?
@seriousbeing7328 Жыл бұрын
Since the topology is good, it can be turned into any poly level using SubD But the final version is somewhere near high. Definitely not low poly.
@goo9019 Жыл бұрын
How do you connect vertices?
@ArijanRace Жыл бұрын
There are two ways. You can press F with multiple vertices selected to create a face between them. Or, if you select two vertices on an existing face, you can press J to create an edge that cuts through that face and connects the vertices.
@05LEGENDANISH2 жыл бұрын
from where we will get blue print
@zhenyamiroshnichenko93762 жыл бұрын
Бро ты лучший, на русском я посмотрел все ролики но благодаря твоему, без знания языка я узнал куда больше спасибо тебе за 3 часа отличного времяпрепровождения)) хотел спросить, после SHIFT S 2 >>> SHIFT S 8. Как ты объединяешь точки после Mod. Subdivision появляется дыра я переделывал раз 6-7 один и тот же момент видео затер до дыр) В итоге просто соединил все точки через F За ответ был бы очень признателен THANKS A LOT
@AngletonÆ Жыл бұрын
Что бы небыло дыр, зайди в Edit Mode выделив все полигоны нажатием английской A, следом нажимаешь M и выбираешь Merge by distance. Готово) Еще же не поздно, да ?)
@rednels Жыл бұрын
@@AngletonÆ а как он реф позади ставит и моделит сетку? в таком режиме реф пропадает у меня, делал импорт имейдж имейдж ас плеейн
@qwertyqwerty4320 Жыл бұрын
@@rednelsесли актуально,изображение можно перетащить просто в окно блендера с рабочего стола,далее в настройках изображения ставишь нужную прозрачность,ставишь с какой стороны изображение может просвечивать мэш и так далее
@Douye_Adedeji26962 жыл бұрын
Amazing tutorial Sir. I love the workflow. Is it possible that you provide the reference for us to use? Scouting for references is a bit stressful Sir
@umadkek2 жыл бұрын
It’s like the first result when you search L115A3 or AWM
@Douye_Adedeji26962 жыл бұрын
@@umadkek Thanks. Found
@tajca_sus32 жыл бұрын
How did you use CTRL left click in the magazin part? 2:55
@Spamwastaken2 жыл бұрын
for me i use ctrl+right click
@Dallas14602 жыл бұрын
👍👍👍
@mrredhead1 Жыл бұрын
how is your reference image so high quality. whenever i import mine it looks like it's in 144p
@ArijanRace Жыл бұрын
Is the quality of the image file on your computer high?
@mrredhead1 Жыл бұрын
@@ArijanRace the size of the image is 600x300 if thats what you mean
@asvalias Жыл бұрын
@@mrredhead1 600x300 is somewhat close to 144p
@cyonu5675 Жыл бұрын
@@mrredhead1 you may have to go to the website because google images are smaller
@Autaka-Nubia8 ай бұрын
use AI
@randomuser1846 Жыл бұрын
Where Can I find a the picture you have for the awp ?
@chihunen6854 Жыл бұрын
i found it it's in AWM's wikipedia
@katesamosuyk1927 Жыл бұрын
He uses the reference from Wikipedia. Он использует референс с Википедии