Modern-Day, Butyl Sound Dampening 101- An Overview of the First Stage of Sound Deadening

Car Builders runs you through what stage 1 sound deadening is, how it works, how it is applied and what tools you'll need.
Remember, stage 1 is used to dampening sound generated from panel vibration. For external noise, you will need to look at the stage 2 products, which replaces the factory cotton jute or shoddy.
Materials used in this video:
Stage 1 Sound Deadener
www.carbuilders.com.au/soundd...
Install Kit
www.carbuilders.com.au/sound-...
Feel free to contact us at [e-mail] to answer any of your questions.

[@T8ersalad]

I cant disagree with "make sure not to touch the sticky butyl layer." Although butyl is self adhesive and self healing and absolutely is not at risk of a little hand oil keeping it from making bond. So I agree and disagree at once. 😂

[@ivareskesner2019]

Can you help us out with an answer, mate? Would these butyl sheets be any good for sound proofing a grow tent or is the idea that they're in contact with metal and absorb the metal vibrations?

[@harrisons62]

Bought a pack put as much as I could into the doors makes a load of difference, had to use my mum’s face roller lol because I forgot to buy the roller.

[@carbuilders1]

😆 👍

[@0qatarqatar]

Keep them up buddy, awesome

[@carbuilders1]

Thanks for the support 👍

[@jeffreyeiford2750]

Hello , I have a 92 Dakota . I was going to put -POR 15 45404 rust prevention coating on the metal first . My question is will your sound deader stick to this ? Thx Mouse

[@carbuilders1]

Hi Mouse. Yes, it will. The best way to test if anything will stick is to test it with sticky tape. If the tape sticks down firmly so will the sound deadener 👍

[@jeffreyeiford2750]

Thank you

[@nt4409]

u should do the before and after thing. Starts the engine, turn a decibel meter on before deadening and after.

[@carbuilders1]

Ni Nate. We did this in another video kzbin.info/www/bejne/eoawm2ysZc6ogKs check it out at about the 20:30 minute mark of the video 👍

[@luqmanhakim6432]

Hi, just a quick question. Does your products certified safe i.e. have ROHS, ISO?

[@carbuilders1]

Hi Luqman. Which country are you from? These meet all Australian safety/health requirements 👍

[@luqmanhakim6432]

@@carbuilders1 Thanks. Glad to know that. I'm from Malaysia. You got dealer here or ship directly from Australia?

[@adrianp2007]

G'day, I'm about to lay some deadener in my 1997 Holden VS Commodore. Should I remove the original bitumen deadener first? Why? What if I don't? What's the difference? Cheers mate!

[@RYAN-ms1mr]

are air bubbles an issue with these pads? how do you avoid air bubbles

[@carbuilders1]

Hi Ryan, when using a roller its quite easy to roll out any bubbles. If you get a stubborn one, just a small slit with a knife, roll over it and you are sorted.

[@brettbarker8444]

@1:10 “That’s not a knoife.” 😂😂 Sorry.