Modern Shower Niche with NO TRIM!

Modern Shower Niche with NO TRIM! - Tap Subscribe, Bell Notification and Like!
Stabila Torpedo Level: amzn.to/2RQlK65
Dewalt Bar Clamps: amzn.to/3eNaX5C
Best Gloves out here!: amzn.to/3dSMqvn
Levtec Tile Leveling System! amzn.to/3vPRWoP
Tools we use: www.amazon.com...
I'M ON INSTAGRAM: / landbergtiletv
Support My Channel. Buy a Shirt!👕Order Tile Shirts: teespring.com/...
#showerniche#tileinstallation#showerrenovation

[@StudPack]

Mr Landberg! This is one of the best looking shower niches we’ve seen. The tile is sleek, the design is modern. Miter edges look awesome 👊🏼 definitely pulling some inspiration for the future 💪🏼

[@LandbergTileTV]

Thanks, love your channel guys! Comrades here! 😎

[@richarddawson5836]

Shouldn't the bottom sill have been put in first so the back tile would sit on it allowing for better drainage?

[@johnvalencia7488]

Gonna try my rookie attempt at redoing my whole shower soon as I retire and the clarity and speed that you teach makes the thought less daunting. Watching your videos gives me confidence that I will be able to do this. Thank you!

[@Will-nb8qk]

It troubles me that the centre tile in niche isn’t sitting on top of bottom tile for waterproofing purposes.

[@lauriesoleim2802]

You don't need because he's using a Kerdi niche and it's already waterproofed.

[@Will-nb8qk]

@@lauriesoleim2802 : well why allow water in joints and potentially creep and fester.

[@shannonchisholm1629]

I’m a watershed guy. Niche ledge goes in first.

[@Sirricardo6]

Where you have a small gap that is not filled, would the water travel in a small crack by capillary action anyway? I am guessing the important thing is to have a gap for a flexible sealant.

[@moneymakingmikeg.9555]

Mad skillz all day erryday!! Hoping all is well Liggy Liggy Landberg, Dirty Jersey out!!

[@LandbergTileTV]

yes sir!

[@crabbydad8931]

I like this. I also like old-fashioned edge tile. the new metal edge stuff although looks clean, looks out of the 70s to me ; )

[@davidtown6825]

Thank you for making an awesome video!!! loved the fast forward and limited talking. Great work

[@holyfreakinguacamole]

I'm crying just watching this $$$$$ schluter product being used for a demo. lol

[@joycef4993]

I actually wanted a clean look like this but with my cheap ceramic 3/8 inch tile I was afraid that even with a good grout line that the edge might chip over time - so passed on it, but yes good to see it done this way as I wasn't sure it would work. I would also put the tiles in a different order for the waterfall effect of water not getting in behind the tiles.

[@stevo0861]

Excellent and it looks fabulous. Two small issues. 1. Please, calm down a bit, My ears were burned out after this. 2. It's Neeeeeeesh, not nitch. Great work my man. Yo! ;)

[@donaldcotnoir1865]

Love the mitered corners. I would install the pieces in a different sequence however. Shelf piece first then the top then the sides with the back piece last. Just the way I install a niche. I have the same Dewalt saw also.

[@extraart1]

Thank you Donald- that's the way i do mine as well. Got to keep the water out from behind those tiles.

[@docsridingadventures2880]

From a waterproofing standpoint that just makes sense... not that this job will fail because of it but some people put too much faith in the waterproofing below that they forget your last chance to keep water from getting to the waterproofing is in how the tile gets laid

[@ChristIsLord229]

I always love your music.

[@reddbeard2030]

Yessss! Go Berg! I've done a few of these as it is a nice finished look. Beautiful job. Berg Makes it Look Easy 💯

[@mwoxo]

Personally I think it would look better if the sill protruded a fraction to hide that outside join because the join is not perfect and there will be yellowing of the grout in future. The sill would also need to be slightly bevelled top and bottom.

[@larrys5733]

Always a nice finished product. But I find the videos lack explanation on measuring and tips / tricks. (For ex. How far below the level of the tile do you set the foam board of the niche.)

[@LandbergTileTV]

Here is a video that might help kzbin.info/www/bejne/p2bPfmmpadV9esk

[@TEXAS.N8V]

Excellent clean work!!

[@salvadorcastillo1539]

Nice job very very clear explication!

[@ahayee1885]

Great job as always 👍

[@rdy4trvl]

Quality job...well done. Thanks for sharing.

[@flipp308]

As always another awesome video. Once again very informative. I do like the clean look of having no trim. Thank you for sharing your knowledge with us. Keep the videos coming please. “FLIP”

[@travisk5589]

How tf do you get your dewalt saw to cut bevels? My dewalt saw with whichever $80-$120 blade on it cuts in and out ever since it was brand new.

[@tatigfloss6647]

Appreciate it ! Question: How do I explain this to the person doing my tile and should an experience tile person know how to make a miter cut?

[@LandbergTileTV]

Hard to explain as planning is difficult to avoid "notch" cuts around the niche. It will cost more and yes, they will need have some experience doing it before.

[@nickbro01]

Very nice 👌 👍 Ur an artist 🎨

[@Participant616]

Step 1: buy an 800 dollar wet saw. Very cool though. I don't get how you make sure the tile lands perfectly where the niche is though.

[@CulichorHimself]

Fantastic video, Thank you Sr much appreciated

[@ronniegraff4798]

as per your tile layout the back of your niche should have a seam in the middle

[@santiagodominguez2522]

Nice like always what do you recommend to ground it and be water proof also

[@josevilca6493]

very explanation good work.

[@kaivil1328]

I notice you use the Dewalt saw more than any other saws. This seems better then the trim. And less work. Good video 👍

[@LandbergTileTV]

Dewalt will always be my favorite!

[@michaellourenco2475]

Awsome! do you leave a gap on the mitered edge to fill with grout? how do you fill any gaps?

[@LandbergTileTV]

Yes, we leave a joint for grout. Prism grout fits in any size joint.

[@xevasung]

Thank you very much!!!

[@ShootStraight84]

Do the video on calibrating the DEWALT tile saw

[@nhm7530]

This tile looks like.... American Villa Noir Black Veined 12-in x 24-in Glazed Porcelain Marble Stone Look Floor and Wall Tile from Lowes

[@LHAGYALO258]

Thank you sir

[@krisclements7545]

pretty legit!

[@fazometr8658]

Cool 👍👌✊

[@Mike-gz2vt]

Good job

[@janethaller1201]

What do you do if you don't have a wet soil that does miter edges

[@wasntme3651]

This guy does excellent work!!!

[@LandbergTileTV]

thank you!

[@kevinmitnick8443]

Very nice

[@janicefoote2033]

How to keep soap from sliding off of it

[@Sirricardo6]

Hi, Is there supposed to be a grout gap at the back and corners of the nitch or do you apply sealant to the corners?

[@LandbergTileTV]

We use grout

[@tatigfloss6647]

How should the edges be finished to continue with the seamless look?

[@danlinho1885]

Dude... miters are flawless... however... set the stone first. That way water is going to run down the back and sides onto the stone and out... instead of sitting on/soaking into a grout joint at the back edges.

[@grrinc]

Great video man. Cheers. One question though, between the mitred tiles, what size gap? And would you suggest grout or silicone?

[@jonathanbell9349]

grout in the gap, silicone inside the niche

[@arnieselectric007]

Very Cool Berg...;-)

[@alwayssearching1882]

Do YOU caulk the interior joints of the niche?

[@LandbergTileTV]

no we don't

[@jimywealth4628]

what adhesive was used? MAPei?

[@hagakuru]

Why do you have the sill angled towards the back of the wall where the water can pool and seep? Thought you were supposed to angle it towards the outside so that it can drain off?

[@LandbergTileTV]

The sill is pitched out, not in.

[@erwinwalker1810]

You obviously can't read a bead it's falling away

[@erwinwalker1810]

Sorry Landberg comment wasn't aimed at you it was ment for the guy who can't read a bead it obviously drops away respect from Scotland

[@lorenzothompkins3580]

Hey what type of wet saw did you use for this?

[@JasonJFlippingLife]

True professional. 👍

[@powshredder3716]

im assuming you left out water proofing the seam in the kerdi for expediency ?

[@LandbergTileTV]

Demo purposes only 😎

[@kerryroberts8323]

@@LandbergTileTV So you teach a demo that is not what you do in real world? And wonder why so many DYI mistakes.

[@johansen1010]

How did you seal it ?? Lol

[@alijames3899]

where can i find a stone sill like the one you used?

[@jperello001]

I wished I had your saw!

[@dive2drive314]

I've been doing bathrooms for over 10 years and this is my least favorite thing to do besides grouting and sanding. Even worse when they want two of them side by side.... mind you i am not a career tiler and don't have all the pro tools for tiling, just the basics to reno a whole bathroom. Not to say my tiling isn't good, just that it takes me way longer than it probably would if i had more tools at my disposal.

[@salvadorcastillo1539]

And demonstration!

[@dontjohnson8146]

If it was me I would have put a joint vertically in the niche to make it all look like a true brick set pattern. Or initially do my tile layout so that I end up with no joint in the niche🙂

[@LandbergTileTV]

yup, that's an option, or deco mosaic in the back

[@EvanCarrollTheGreat]

I don't think you'd ever be able to get those angles right enough for a miter niche without buying that premade box.

[@mk1driver]

Cool

[@REGDORTNARG]

nice

[@edwincajas8841]

I wish I can have that wet saw 😢

[@chrismiltimore]

How much do you need to add or subtract from the measurement to account for the mitre?

[@LandbergTileTV]

at least 3/8 " (thickness of the tile)

[@sgtjohn08]

I have no idea what day it is because there was no Tile Tool Tuesday this week.

[@LandbergTileTV]

No excuses, I got lazy! Will put one up this Tuesday for sure. I have a lot of really great tools to review for future vids..

[@sgtjohn08]

Right on. Just giving you a hard time, really enjoy the channel.

[@vinnydelucia2510]

Trying to send pics. Not working. Anyway i could send them to yiu personally? I would appreciate the help. Name is vince

[@jfontesrj]

Can you build one with mosaics?

[@LandbergTileTV]

sure can!

[@giovannidaronch2803]

Hallo guy... you wrong the sequence... First one is the down ceramic... Last one is the center of the niche...

[@LandbergTileTV]

Not with a Schluter prefab niche 100 % waterproof

[@TOOTLEBEES]

@@LandbergTileTV Shouldn't matter if they advertise 100% waterproof...cause you never know..... and it pays to take the extra measure....that's going the "extra mile" to do things in a way to minimize every possible mishap

[@MrTooTechnical]

Kick ass

[@matts5771]

I can never cut miters on my wet saw. Always cuts crooked

[@jroc7443]

The secret is to cut the tile to length first with a good blade. Then you either can set your saw to a bevel and cut the angle or use an angle grinder with a grinding/polishing wheel.

[@Tigerratcat]

No waterproofing membrane?

[@LandbergTileTV]

demo

[@vinnydelucia2510]

Hello, great job on all videos. Beast , for sure. I did like and subscribe and hoping you could help me out. My tile guy was not so tile friendly( pun intended, not a nice guy either) he did a niche for me but he did not 45 the edges and it looks extremely rookie. Could you tell me how I could remove edge pieces and redo? I have gotten much better with tile ing and feel I could handle the job. Here are pics

[@LandbergTileTV]

You will probably need to tear out the niche completely and redo. Schluter jolly is a great trim for niches

[@ManuelRamirez-od7tm]

Stone goes first sr. ans looks better with stone lip

[@LandbergTileTV]

Many ways to build a sill

[@FairviewRCflier]

Whatcha going to do with that after you are done?

[@LandbergTileTV]

use it for future tile tool Tuesday videos 😎 hole drilling, grinder cutting etc.

[@grahamsiebring5227]

How do I do this without spending a fortune on a miter tile saw? Can I rent one? Thanks for the video!

[@LandbergTileTV]

Harbor Freight 10" with miter

[@grahamsiebring5227]

@@LandbergTileTV thanks!

[@Trucker-Belly]

Pimpin isnt easy but its necessary.

[@JB_58008]

Next natural progression to bullnose

[@andrewjaime7515]

What tile is this?

[@LandbergTileTV]

porcelain

[@adamjeffery6909]

Great content can you tell link me up for those dewalt niche clamps pls ?

[@LandbergTileTV]

thanks! link is in the video description

[@deeplorable8988]

@@LandbergTileTV Your Link is for standard clamps. Do you have a link for the inverted design? Thanks, bro, great content. Unless those clamps can be switched around?

[@LandbergTileTV]

@@deeplorable8988 yup, remove and switch around

[@Trucker-Belly]

I would rather miter the tile then deal with my shit chop saw and 8 mitered corners that never match and endless sanding no matter how square my niche is...

[@extraart1]

Absolutely. Plus the Schluter silver trim looks cheap. Harry Homeownerish.

[@mattmason7554]

I appreciate your videos. You must work 8 days a week..

[@nocraic]

It's pronounced neesh

[@kingpredator4998]

The marble piece going always first and then the other pieces around on top, this guy is a noob