PORTED McCULLOCH PRO MAC 10-10S ARE A FUN LITTLE SAW TO FALL TREES WITH , PORTED IS THE KEY , NO NORMALLY A CHAIN SAW FOR FELLING TREES WITH.. BUT YOU NO ME .
Пікірлер: 132
@kevinkenyon45935 жыл бұрын
Billy Ray and Hogan. I hope you two never stop having fun together.
@davidmc81105 жыл бұрын
My first saw was a McCulloch, an old one that my Grandpa had, with a hand pump oiler. Cut many balsam, maple, and cedar with that saw; put on an Oregon chipper chain and a sprocket nose bar. Great saw, lasted for years, until someone stole out of the garage.
@spencermcginty98125 жыл бұрын
Bell hopper sure does a good job on those saws! They’re so much fun to run and if you think about it...someday they’ll be even more rare the. Now. Love to you and the family❤️
@williamdeberry32325 жыл бұрын
Thanks buckin. I cut some small snags down that was dead. I used the bird mouth cuts that you showed worked great thanks for the tips. I like the tips and the fact you explain the use of the cut why you would cut them a certain way.👍keep up the good work.
@TheJonsberg5 жыл бұрын
That 10-10 sure pulls with ease.. Good show 👍 Blessings from TheJonsberg in Norway
@BuckinBillyRaySmith5 жыл бұрын
HELLO JONSBERG
@olddawgdreaming57155 жыл бұрын
Enjoyed the felling today, liked the close to the house cuts a lot. Thanks for sharing
@thenorthener68555 жыл бұрын
Haha! I just watched the last video, and the notification came up... nice stuff, spending a nice Saturday afternoon outside with the PC watching a episode of the Buckin' and son adventures :) Have a great weekend everybody :)
@mudsling4545 жыл бұрын
I found u on utube .looking for how to sharpen a chain ! I continued to watch for ur mcculloch saws , I understand on why u use ur huskys ,theyre bad ass ! I thank u for using a mcculloch saw for another video , im a big fan of mcculloch be safe and continue to help make the world a better place!
@BuckinBillyRaySmith5 жыл бұрын
GOOD MAN
@billonthehill99845 жыл бұрын
Glad the tree next to the outdoor porch traveled to the right of the tree & didn't go left of it, creating a OOPS moment... Myself personally & not being a professional, I would have roaped that tree & appled light pressure to it away from the house. When working alone, I would use my tractor as a hookup point & pull the tree down. The 1st tree across the d/way, from my vantage point appeared the back cut came out below the hinge, hence the tearout above the hinge. First time I've observed this from you Buckin'... keep em' coming btw, I love this stuff! Bill on the Hill... :~)
@kevinpilkington65275 жыл бұрын
Beautiful Mac sounds really stout. Great stuff as always friend....Stay Blessed, Kev
@treebender2615 жыл бұрын
I have a 10-10s pro mac just a fantastic little saw love to see you working your mac's
@willcollier90315 жыл бұрын
Very enjoyable. Nice work men.
@bradbaker57265 жыл бұрын
Love the sound of the McCulloughs
@jeremyberg98455 жыл бұрын
That tree had some gorgeous burl on it !!!
@biglutherie4 жыл бұрын
You're a brave man, Buckin Billy, goin off into the Pit of Ferns single handed like that. Many a brave man has entered the Pit of Ferns, never to be heard from again.
@edwardelliott88315 жыл бұрын
I love your show have cut wood firewood and logs for years had 10 10 an Sp70 sp81 promac 800 700 about 2 years ago I lost a leg but hope to cut some more wood I have 460ms 346xp 357xp 2065 johnserd 510 dolman 540 dolman an 2 mac
@BuckinBillyRaySmith5 жыл бұрын
YOU WILL CUT
@oldmanfred86765 жыл бұрын
Loved watching the chips fly on that one that looked like an Easter Island Moai and the rotten one with bumps!!!
@Z-Bart5 жыл бұрын
Rockin the 'Thorogoods'. Lookin good Brother! 👍
@firewoodhawk39175 жыл бұрын
Ya know wont get that saw outa his hands for awhile, like a kid witha new bike patience mrs, Buckn, nice saw Buckn
@bykrmom5 жыл бұрын
Love the sound of that 10-10s! Those Macs sound great, right? Major dead tree there. More of a tube at the bottom Hahaha
@jackfrosty79ify3 жыл бұрын
Love my 10 10
@ericriddle4675 жыл бұрын
Hey buckin that sure is a nice saw sounds great have a safe a blessed day
@ryanssawmill82245 жыл бұрын
1010 😁 what a nice saw buckin sounds great ...
@davidclarke40405 жыл бұрын
Hi buckin nice one stay safe buddy
@hpelisr5 жыл бұрын
Looks like those folks back in the woods don't see the light of day Buckin, you have got to bring them out of the darkness.
@michaelcarrier85645 жыл бұрын
More great stuff bud lots of love.
@mikehornsby5995 жыл бұрын
Great job enjoyed that, really worked the saws hard!!!
@moofdoggmike5 жыл бұрын
Awesome vid Buckin, that Mac screams baby. And that hollow tree, scary footing there , be safe and take care you two... great duo at work the last couple of vids. HAGKD everyone,
@robertmailhos81595 жыл бұрын
I had a McCulloch timber bear I looooovvvveee that saw I miss her 😭😭😭 glad to see you are able too keep the classic saws running 😀😀😀😀oh the way I saw a pioneer two man saw it had a handle grip.on the nose she ran fine but the chain tensioner didn't want to do it,s job but she was beautiful machine 😁😁😁😁
@fliplinefrancis57425 жыл бұрын
Love The Videos Keep Up The Good Work
@d.ahwooomazenkas80755 жыл бұрын
Ahwooooo 👍
@famasmaster20005 жыл бұрын
Love and peace to this community ! Have yourselves a great weekend all . Nuttin like a 1010.....music to the ears 🤪
@joedyer88245 жыл бұрын
Man I really like that Mac I had a 10 10 auto you just couldn't kill it that s is a beauty
@georgewallacejr56445 жыл бұрын
Hey buddy good job like it 💪🏻💪🏻💪🏻🙏🏼
@mrbill94545 жыл бұрын
Man your saws pull hard! I love it! You guys are rockin it!
@johnsuch27075 жыл бұрын
The Mac is wicked !!! Can’t wait to hear one in person come September 😎
@JP84x185 жыл бұрын
What the heck was that crazy burl tree at the end?! I see the maple leaves on it, but that’s not like any maple I’ve ever seen!!! Would have liked just a single tree video with commentary on that little beauty.
@robertdement60155 жыл бұрын
Man thate power in that saw she's got some balls to her
@jeramiahshaffer84145 жыл бұрын
God bless brother stay safe be kind keep up the great work ...👍🏻👍🏻✌🏻✌🏻
@davidwiltsie12575 жыл бұрын
Hey Buckin' Billy
@MR-rt8bx5 жыл бұрын
Tree work!
@gravelyman5 жыл бұрын
Saws run great Buckin!!! And great to see you and Hogan!!!
@dwoods11785 жыл бұрын
You guys were hitting it hard that day! Good job!
@lilaboys42575 жыл бұрын
Hope the Army is doing awesome today!
@lenhowl5 жыл бұрын
Love all your vids man, well done. Always learning something new and I have been cutting wood with power saw for 30 or more years. Can still remember when my sister got my father his first chainsaw, a mcculloch. Before that it was all buck saw and ax. Cheers
@Johnnydoxx5 жыл бұрын
That last one was sure a goofy-lookin tree..... thanks for taking the time to make these videos Buckin!
@leonardvirtue57535 жыл бұрын
Mate!!!!! This is real bad!!!!!! Real!!!! Bad!!!!!! Too The!!! Bone! !!!!😆😆😆👍👍👏👏💪💪 Nice.😆
@paulgargulak82755 жыл бұрын
that last hollow tree all the burl! omg as a wood turner those would be great fun
@johnhanson47955 жыл бұрын
Love That 10-10!
@patrickfletcher29025 жыл бұрын
Have to finish watching later I have a log pile to cut, and I think I just heard my pro 10-10A start it self. I better go give it a run. Love to all the army see you all soon Union MI.💪
@RM.....5 жыл бұрын
Boy that last one just popped right off the stump in a hurry.
@richardsullivan17765 жыл бұрын
Buckin' I have a new slogan for you. "CLEAN THE KERF" of the over cut and under cut. I think its pretty snappy myself, lol!
@TheSagerider5 жыл бұрын
LOL, your just too much Billy. Keep up great work you do. Peace Bo.
@jolkraeremeark69495 жыл бұрын
Quite gnarly hollowed out totem pole - wow!
@chrisbodenstab15285 жыл бұрын
Hi buckin Billy Ray be kind
@Thetreefella5 жыл бұрын
💛10 10 s💛whata saw,
@DerMeister821 Жыл бұрын
My dad "worked in the woods" when he was laid off for a couple years, late 70s into the early 80s. I believe he used a pro-mac, probably a 10-10 based on what I can find for sale on Ebay. We used it to cut firewood for heating until the mid 90s, and then it was back up for a new 55 husky. He passed this summer, and I was trying to find that saw, can't find it, kind of sucks. I know he had trouble keeping it running, so it's probably at some ole small engine shop somewhere.
@gcfordhandmade37135 жыл бұрын
The fern gully!
@BuckinBillyRaySmith5 жыл бұрын
YIP
@georgephillips67765 жыл бұрын
never seen anything like that last tree wow lol
@davehutcheson37855 жыл бұрын
I hope that last tree went to a woodturner! 😁
@conmanumber14 жыл бұрын
Greetings fellow traveller from Oamaru, South island N.Z.
@matthewclarke79935 жыл бұрын
Hey BUCKIN I think we would like to see unboxing videos
@rickparrott8905 жыл бұрын
Iron horse is a hoot.
@justinblanchard58565 жыл бұрын
Hey friends hope you all are having a great day😁✌
@TheJonsberg5 жыл бұрын
All the best to you and your family Justin,👍❤️
@justinblanchard58565 жыл бұрын
@@TheJonsberg right back at ya brother✌
@rockybranton62385 жыл бұрын
Another great video buckin!!!
@robertmalis44935 жыл бұрын
That one is big money with all the giant burros on it
@marksalter65695 жыл бұрын
LOve the videos ,from Florida
@phogelbice5 жыл бұрын
If you read 'Brave new world' they had world peace. Sorry for being sceptic but I follow the news... Happy for you guys who can stay optimistic in todays world! Perhaps Im just depressed vacations over... lol. Take care!
@SergioSilva-jn6ru5 жыл бұрын
How u doin'? Nice saw indeed.
@brianeastman35473 жыл бұрын
Shut up you Dago
@jacklowe37885 жыл бұрын
Pretty Saw!
@gerritvanwilligen5 жыл бұрын
Wow... Yesterday I took down a tree that in my mind was pretty hollow and rotten. But compared to the tree in the end of this video it was actually pretty healthy 😲
@TheBronco675 жыл бұрын
wow there was some nice burlwood in that last tree I hope they let you take it home to sell, it;s probably worth more that you got for doing the rest of that job
@johnsommerfeld68895 жыл бұрын
Another fun day in the woods!
@davidwiltsie12575 жыл бұрын
Why do you pull the cord out just before you turn your machine off?
@mwilliamshs5 жыл бұрын
The starter pawls (aka dogs) on the old McCullough saws are mounted on the flywheel. It's centrifugal force that holds them in. As the flywheel slow down, that force decreases and the pawls can grab the recoil mechanism. If you pull the cord out before shutting down the saw, your arm will absorb any shock from kickback. If you don't, that shock is transferred to the recoil mechanism and must be absorbed by the cord, the handle, the pawls, etc. Pulling the cord before shutdown protects all those components. There is a good bit of force at play so get a good grip on that handle. The procedure is found in old McCullough owner's manuals and is only relevant to flywheel mounted recoil pawls and may in fact damage other saws like the Homelites with their overrunning starter clutches/one-way bearings
@karsonbranham39005 жыл бұрын
Nice Mac! The S was a little more cc’s was it not?
@BuckinBillyRaySmith5 жыл бұрын
YIP 57 ,,
@deerhunter1634 жыл бұрын
Ole Buckin is always on target!!!
@d.m_7779 Жыл бұрын
this sound is sick
@jeffbrown71485 жыл бұрын
Father and son combo! LOVE it!! What fuel mixture do you run?
@jeffryblackmon48465 жыл бұрын
COOL VIDEO. That knurled and knotted tree surprised me that it was hollow. When you walk to the camera to speak, please stop the saw's engine or leave the saw behind. I could not understand a word you said and I can't read lips. Thanks.
@terryw.milburn85655 жыл бұрын
Mmm Mmm Music To Me Ears ! she Eats It Up, Nicely ! Bell-Hopper Sure Made 'Er Sing Eh ? Great Day with Ya Fellas ! Every 1 Have A Swell Week Ahead & Love To All From Down East ! ATB T God Bless
@BuckinBillyRaySmith5 жыл бұрын
ANYTHING SHOW UP IN THE MAIL YET
@iannlb5 жыл бұрын
I wonder if any of the wood turners in your area would want to pick through that giant rotten burly one. I know they do a lot with epoxy now.
@genefortney91335 жыл бұрын
Hi Buckin’ Great Job with the 10 10 S, I have just bought a Super 10 10. I believe that this is an earlier saw. Is there any difference in power between the two? Keep those great videos coming! Thanks!
@michaelwetterling93933 жыл бұрын
I just bought my first Mac Buckin she's a McCulloch 1010 automatic
@bearpawtimber87395 жыл бұрын
I'm here early today. Live stream tomorrow Buckin?
@jethroboorer28605 жыл бұрын
Hey Billy is bell hopper going to get into production of those wrap bars? I'm going to build 1 out of some spare bars but is tricky. His looks really nice
@eucalyptusleemcconnell83145 жыл бұрын
Oh my that big burly maple tree is hollow as man that thing is wild buckin seen a pro 800 mac for sale for $100 bucks I mite get me one hehehehe
@MegaBurndown5 жыл бұрын
hey bucking I have dumb question manly because I don't know why do you make your pie cut from the bottom ????
@BuckinBillyRaySmith5 жыл бұрын
DONE IT FOR EVER
@JCrook10285 жыл бұрын
Most fallers do it that way. It reduces waste on the keeper portion of the log. If he did it from the top then he would have to cut it again to have a straight butt end.
@alextheriault84745 жыл бұрын
Hi
@yankdoodlediesel25745 жыл бұрын
If I may ask what is yer preference on cameras as to what you use mostly
@yankdoodlediesel25745 жыл бұрын
The one on yer helmet is a gopro but which one is it? And what do you have on yer tripod?
@greatgreengoblinbear38005 жыл бұрын
The dirty burly maple
@dalemeyer82078 ай бұрын
Thanks 😎
@balanionut88632 жыл бұрын
Hi. Could you tell me what do you mean when you say modified? So a normal mcçulloch pro 10 10s dosen't doesn't run like that? I'm asking cuz I would love to buy one. Thanks a lot
@kurtgolden74885 жыл бұрын
10 10 5x5 tree yahooooo
@joshschafer80985 жыл бұрын
Give boyo a helmet cam
@matthewmiller35804 жыл бұрын
That is a rich mix I run my eco 670 at 25:1
@atefs57195 жыл бұрын
This doesn’t look like pro Mac 10-10s muffler is different?
@braydengeorge67243 жыл бұрын
Can you make a video of just the 10-10?
@ramonta33 жыл бұрын
Tengo una igual y siempre tengo problemas de encendido e incluso dejar de utilizarla por cansancio de encendido..
@johnclarke66475 жыл бұрын
My 361 that I built will eat that MAC alive and my 660 will make it look like my top handle😁
@tjlqk35 жыл бұрын
John Clarke cool story
@BuckinBillyRaySmith5 жыл бұрын
@@tjlqk3 HAHAHAHAHAA
@tjlqk35 жыл бұрын
Buckin' Billy Ray Smith I’d like to see his 361 that he built running 30 years from now.
@karsonbranham39005 жыл бұрын
Creamsicles🙄I’ll take a McC any day of the week. Nothing against your saw John Clarke, but they just aren’t the same. Ergonomics is where it is at when you run a saw for a living. If it weren’t for the family infighting and the massive EPA restrictions on power saws, the McC’s would still be made today. The 10 series were as still are IMO, the pinnacle of saw design. Light and powerful in a saw that had almost no plastic. Of the modern production units, husky’s proline has got the ergonomics over the Stihl saws. Compare side to side sometime using one then the other for like 2-3 days 6-8 hrs a day cutting and you will see what I mean. The biggest gripe I have about stihl is their tendency to be overpriced.
@rideironhard575 жыл бұрын
I'm trying to learn how to get a message to you tomorrow I'm going to buy a pro mac1010 for 50.00 bucks actually comes with 3 chain saws but I'm only intrested in the Mac for 50 I got a drive a little ways but i was wondering what you thought of that price he says it has good compression other then that he doesn't know much about it