MODS for the Chevy COLORADO Z71!! Fender flares, LED tail lights, and MORE!

[@HorsePowerObsessed]

Almost "done" with the truck. There might be a few more little mods to do but the big ones are coming soon! What do you guys think of the truck so far? All of the mods done in this video today can be found here: LED brake lights - amzn.to/2Xs63QI LED 3rd brake light - amzn.to/2Exj30j Vanity light LEDs - amzn.to/2UxS61R Stubby antenna - amzn.to/2u3Fi7V OEM fender flares - amzn.to/2u2EH6f

[@asm42]

Personally, I dig the LED lights but I'd rather change the bulbs and keep the originals. The clear lights look too much like a canyon. I'm thinking about getting a stubby as well.

[@HorsePowerObsessed]

@@asm42 You can definitely go that route as well. I actually listed the LED bulb part numbers in the previous video you could use. I used them for a while in the stock housings for the backup lights and they were crazy bright.

[@andrewmacias]

How much dose the 6inch Left Typically run or cost??

[@HorsePowerObsessed]

The 6-in lift from rough country is around $1,000 for just the parts then you have to pay for installation which could be the expensive part.

[@troydedios9759]

hello, i would like to ask if the LED break lights can fit to my Chevrolet colorado high country storm?

[@teashea1]

Putting the silicone on was a great idea ---- very articulate presentation

[@HorsePowerObsessed]

Thank you!

[@crlaw75]

What kind of silicone did you put on?

[@user-cl2es9iu1j]

I don't know what the cutoff point is for minor mods, but glad you seem to know. So far you have taken your Colorado up some notches. Cool ride! I really like your truck.

[@HorsePowerObsessed]

Thank you. I appreciate that!

[@markcanino7164]

Awesome video, thanks for explaining how everything is actually installed not just listing off mods!

[@HorsePowerObsessed]

Thank you!

[@davidflagg1045]

Looking great. I have a 19 Colorado Redline and just swapped out the chrome lug nuts for black. I think it should be next for your truck. Relatively cheap models that fits your theme.

[@HorsePowerObsessed]

I have given that quite a bit of thought. It might just be on the list! 👍👍

[@themist18]

Stubby is awesome, small size factor and works like stock!! Thanks for introducing all this stuff

[@HorsePowerObsessed]

No problem! Thank you for watching!

[@roberthays8526]

Great channel. I just picked up a 2020 Colorado RST in red hot ( close to a twin to yours). Got it 2/24/20 and so far have installled a Flow Master 40 series muffler w/ dual tips, a tonno cover and some graphics to come (mild). Love the truck.

[@HorsePowerObsessed]

Thank you! Congrats on the truck!

[@terryagreen]

I’m doing my mods and the LED upgrade for interior lights is awesome. Bulbs are in the mail. All GMC vehicles are always dark and have been that way for years. I have the Denali model and probably won’t do the fenders although they certainly do add protection. In terms of form and function the tail lights are great but not sure I like the look when they are not working. I was just going to leave the stock lights but now think I might do some that look more stock but are LED. Great video with some great tips!

[@HorsePowerObsessed]

Thank you!

[@mustanger041]

I love how easy u make the installations step by step. love the video

[@HorsePowerObsessed]

Thank you! I try to show everything so it's easier for everyone.

[@StevenLNew]

I put a 5" lift on my and mine antenna hit as well... Good thing is those antenna's bend really easily. Bent it at about a 45 degrees and wa la... Not more hitting. I was worried the small antenna who mess up my signals

[@HorsePowerObsessed]

I haven't lost any reception with mine and I think it looks nicer without the bigger antenna hanging off the roof.

[@red.riot.2280]

Lights looks awesome. Truck is coming along! Also a PA native!

[@richardmorris7063]

The lights look good,i haven't heard many success stories on them yet.ill see how yours work out,mods on the Colorado seem to be a lot of little things that can make a big difference in the end. thanks.

[@HorsePowerObsessed]

You're welcome! I'll definitely report back. I think that's silicone in the back will save the lights though.

[@metalmanhawaii]

Just bought a Colorado WT crew cab/long bed. Wish I could have afforded the Z71. Maybe next time!!!! Can't afford all the mods you did, but I just did the sprayliner for the bed from lava lining and going to do your LED lights and the stubby antennae next :) !!! I REALLY WISH they put the antennae in the windshields like they USED TO !!!!!

[@HorsePowerObsessed]

I agree! I wish the antenna was located somewhere else as well.

[@JasonLeaman]

These Colorado videos are wicked ! Very helpful.

[@HorsePowerObsessed]

I appreciate that!

[@JasonLeaman]

@@HorsePowerObsessed I'm thinking about the 2021 next year ! Love what you are doing to your truck shows me so many things i can do !

[@HorsePowerObsessed]

They are great trucks and have a lot of really cool aftermarket parts available!

[@chrisveddern7140]

How hard was it to change the Colorado badges on the doors from chrome to black?

[@HorsePowerObsessed]

Not bad at all!

[@dreamcruzer4743]

Nice looking mods. Good thinking on cutting the tape when installing the front flares, which turned out to be a really good idea since I watched your light bar video too. !!!

[@HorsePowerObsessed]

lol I know! I had a feeling I might do that later and I'm so grateful I cut that tape because it would have been a fair amount more work if I hadn't.

[@SethMathews]

I can’t find the 3rd brake light anywhere, is there an updated link?

[@HorsePowerObsessed]

amzn.to/3RulbbT

[@Examplez96]

Love the detail and thorough explanation

[@HorsePowerObsessed]

Thank you! 👍👍

[@fleshrocker]

Clever tip with the tape on the fender flare

[@HorsePowerObsessed]

Thanks! It already came in handy...

[@keithdickson8364]

Can’t wait to get mine. I’m looking at the ZR 2 because it is already lifted. But who knows. Great job on the mods. 👍

[@HorsePowerObsessed]

Thank you! I got the Z71 because the ZR2 tows 2,000 lb less.

[@davidlombardo3030]

Keep me coming! I have a silver ‘18 Colorado with black badging, 2” level, after market steps to resemble rick sliders, fender guards, and hood protector. I plasti-dipped the gold bow ties on the center hub caps. This made a huge difference. I think you talked me into lighting upgrades. Still saving up for wheel upgrades....

[@HorsePowerObsessed]

You and me both! 😁👍

[@samuelmedina6615]

Where can I get the silicon and electric grease you used?

[@HorsePowerObsessed]

Dielectric grease: amzn.to/3nOxmCH Silicon: amzn.to/3eizQGd

[@hap5121]

Can you provide the link for the Reverse LEDS & the Vanity LEDS

[@HorsePowerObsessed]

Absolutely! Vanity LEDs: amzn.to/2UxS61R and the reverse LEDs: amzn.to/2E76vwi

[@The_JEB]

Quick question, is the bar that goes around the tail light orange or is that the camera playing tricks?

[@HorsePowerObsessed]

It's clear/white until it lights up and then it's red.

[@The_JEB]

@@HorsePowerObsessed ah ok, must be the camera or my computer then, because it looked orange to me. I was looking at similar ones for my f150, went with the smoked ones instead Thanks for the reply!

[@HorsePowerObsessed]

You're quite welcome!

[@FrontSeatDriver]

I love the 3rd brake light and new tail lights. They look great! If you're not too busy, I need to replace a light on the side marker on the Lambo. In fact, you're the one the let me know it was out. Lol.

[@HorsePowerObsessed]

Lol yeah I did! I could do that for ya. Swing by this weekend and I'll hook you up!

[@jerryadkins4199]

Those flares look to tame for me . I chose the RC flares and had them painted Rain Forrest Green Metallic andlook great. If you like them that's all that matters. Like the tail lights.

[@HorsePowerObsessed]

Thanks, man! Absolutely correct! It's all in what you like!

[@lizmulero3086]

I bought some fog lights after market but don’t know how to install them do you have a video

[@HorsePowerObsessed]

Aftermarket bulbs you mean or the whole assembly?

[@lizmulero3086]

HorsePower Obsessed yes

[@lizmulero3086]

Yes all assembly

[@IrishOhionan]

Was just going to post how I enjoy your channel and like your truck....then I saw that Packers helmet. Go Bears😃 Seriously though, I look forward to following you now that I brought my new Colorado home today.

[@HorsePowerObsessed]

Oh nice! What model did you get?

[@IrishOhionan]

HorsePower Obsessed Same as yours Z71 crew cab, but it’s black. Dealer threw in a nice roll up tonneau cover, spray on bed liner, and those mats yours has. Again, really enjoying your videos.

[@HorsePowerObsessed]

@@IrishOhionan I appreciate that! I'm just trying to help out as much as I can while I mod mine. It's been a great truck and it's been a blast to mod it!

[@joshr9730]

I had the same 3rd brake light, but the clear plastic yellowed really badly after about 5 months in the Vegas sun. Found a different one on Amazon that I really like though...

[@HorsePowerObsessed]

Wow. It's been ok for me for a few months now. Hopefully that doesn't happen to mine, though! 😬

[@joshr9730]

@@HorsePowerObsessed It's entirely possible they've changed the plastic to make it more UV resistant, or your truck doesn't see as much sun as mine (it's almost always sunny and hot in Vegas). Either way, just keep an eye on it, and enjoy the truck!

[@HorsePowerObsessed]

I definitely will! Thanks for the tip!

[@teamscouts]

Nice work, I just bought a collie 2019 and I enjoy your vids 🇨🇦

[@HorsePowerObsessed]

Awesome! Thank you for watching!

[@Toxicwolf61]

I’m assuming all these mods could work with a 15 Canyon? Maybe not the fender flares but all the lighting ?

[@HorsePowerObsessed]

Absolutely! It's all the same! 👍

[@tony42898]

Really love the mods on your truck! I might follow suit and add them to mine too!

[@HorsePowerObsessed]

Absolutely! Please do! They look fantastic!

[@Oink_McJeffery]

How have the taillights held up? Experienced any of the issues you mentioned happen?

[@HorsePowerObsessed]

I have a video coming soon detailing how to fix any issues you could run into.

[@Oink_McJeffery]

@@HorsePowerObsessed Very cool. I love the look I just dont want a headache lol

[@rbatts9163]

Looks Great Justin 👍🏻. When it’s all done. It will have a nice look for a long time 👌🏻.

[@HorsePowerObsessed]

Thanks, man! I am hoping for the same! 👍

[@jeremycorson2636]

Looking to join reverse lights and cargo light with a diode at the wire hub under the dash. NWC posted this process for a Silverado and I want to know if the same alignment works for my 16 Colorado. Let me know what options I have. I like your MODS.

[@HorsePowerObsessed]

Interesting. I haven't seen that mod, but I do have a few Colorado videos coming with modded light options. Stay tuned.

[@jeremycorson2636]

enter this into KZbin search bar "cargo lights for chevy Silverado" its a 2 min. ish clip, black truck, red accents, red hook tow receiver . Maybe it applies to the Colorado? Will look forward to your new posts for sure. THANKS!!

[@raydog3181]

Hey awesome Colorado. Does that 3rd brake light fit a 2020 Colorado?

[@HorsePowerObsessed]

Yes it does!

[@joed9224]

I bought the same lights for my Canyon, have you noticed any water or moisture inside the light housing?

[@HorsePowerObsessed]

I have not. 👍

[@kimhorton6109]

I’m thinking forced induction. Supercharger or turbo for passing power and improved interstate cruising.

[@charlygarage6619]

Where did you buy the third brake light????

[@HorsePowerObsessed]

Right here: amzn.to/3TVbYLu And don't worry, it will fit any Colorado from 15 up to 22.

[@charlygarage6619]

Thanks bro 😎

[@HorsePowerObsessed]

You’re very welcome

[@pggalantd]

I've read a lot about the issue of fender flares causing rust because of all the water and dirt trapped underneath. I'm wondering what yours or anyone with experience thoughts are on sealing the outside with flex seal or a silicone caulk?

[@HorsePowerObsessed]

The outside is sealed with double sided tape. I really don't see how anything could get trapped in there...

[@joed9224]

I bought that 3rd brake light. I am hesitant to install it because several reviews for the light say the gasket is no good and water leaks in and stains the headliner. Have you had this problem? Is there any modification you recommend before I install it. Thanks.

[@HorsePowerObsessed]

Yes. I will be putting out a video shortly on what you should do before putting it on to prevent this issue.

[@joed9224]

What LED dark 3 rd brake light do you recommend? I bought a cheap one from eBay and ended up sending it back before using it. It had a lot of bad reviews of it leaking and staining headliner.

[@stevenwatson442]

I’ve got a 2016, same Gen, but Amazon is saying it won’t fit a 2016 Z71, did you have any issues with this?

[@HorsePowerObsessed]

No issues. It will definitely fit. Amazon is often wrong with their fitment guides.

[@stevenwatson442]

@@HorsePowerObsessed that’s great, thank you!!

[@zachmckenzie1424]

Awesome video, will be putting all but the fender flares on my 2018! LOVE that they are plug and play, not a fan of slicing wires on a brand new vehicle! Like that you showed install for everything very nice to see before buying

[@HorsePowerObsessed]

Thank you! All of the mods are definitely very tasteful in my opinion and pretty easy to install!

[@joeybagz4214]

Love your channel boss!!

[@HorsePowerObsessed]

Thank you!!

[@daveholte7658]

Excellent You Tube presentation I have a 2018 Chev Col with OEM Blk Flares I want to replace with a wider and possibly a smoother non rivet look on fender type? What brand are these and wear can I get them? I want to keep my large rubber mudflaps with the flares Can you advise and or suggest? Thanks for a great video

[@HorsePowerObsessed]

Thank you! The fender flares I have are the OEM ones as well. I only know of bigger ones with rivets unfortunately.

[@daveholte7658]

Thanks I cannot find the steering wheel blk out bow tie Can you provide? Thanks for your well done and professional YT site I also need the link for the blk tail pipe addition. I cold not find that

[@birdlegs846]

By using tape and no drilling are those fender flares you installed still holding up? Are those the stock oem flares? Some how I got a ding above my back tire and the body shop said they cant do a PDR because of the location of the ding which is just below the quarter panel body line. These flares should cover the ding perfect and I sure dont want to get insurance involved over such a minor ding + I dont want any body filler in my 2yr old truck

[@HorsePowerObsessed]

Still holding up like the day I installed them! 👍👍

[@MikeyRhoades]

First off love the channel. Can you give us a 2021 update on how the taillights are holding up? Do they fog or get moisture inside or have any other issues with them? Last question, a fellow PA resident like 30 miles from you. Has any local police given you any trouble about these taillights?

[@HorsePowerObsessed]

Thank you! Oddly enough that's a video I have coming soon. They have held up great, though. No problems with police.

[@danskeeloNotHacked]

Any trouble with that 3rd brake light leaking?

[@HorsePowerObsessed]

Just recently yes, I have a video detailing an easy fix coming soon!

[@danskeeloNotHacked]

Got one coming in the mail soon. Good to know before putting it on. Thanks man!

[@HorsePowerObsessed]

That and the tail lights completely change the rear end of this truck and I wasn't willing to let it go due to some leaking so I found a way to fix it... An easy and cheap way to fix it.

[@Big_Lex]

How are the taillights and the 3rd brake light doing? Just ordered the same for my Colorado

[@HorsePowerObsessed]

So far so good! Just make sure to do silicone on the tail light wiring.

[@Big_Lex]

@@HorsePowerObsessed I will thank you. And I'll put some electrosieze on the terminals before i plug them in

[@HorsePowerObsessed]

Definitely important. The harness is not waterproof for some reason and without sealing it up you will have issues. With that said, I haven't had any since I used the silicone on it beforehand.

[@KevinJohn556]

Those led lights look great. What do you think of the s10 models getting push to start and the Colorado models not getting it?

[@HorsePowerObsessed]

I feel like any vehicle nowadays needs a push button start. It's odd that in 2019 any car or truck would have a key still.

[@TheSack1998]

I have a 2021 im trying to get these but everywhere I try to order say they won't fit. Id assume all colorados since 2016 would be the same. Any idea if these would fit a 2021? Or is there a difference between the years that would cause these not to fit on mine.

[@HorsePowerObsessed]

They will fit. No one has the new fitment guides yet but the taillights are the same.

[@carlbakke1]

How well did the silicone do for protecting it from water?

[@HorsePowerObsessed]

It did well. Just make sure you use a quality silicone.

[@TheA7Xfan51]

Do you have a link for the silicone you used? Bought these lights and trying to keep myself from having an issue

[@HorsePowerObsessed]

I am actually working on an update to the video for better sealing and giving all that info so stay tuned for that.

[@fredgmz921]

Nice mods Horsepower Obssesed, your Colorado looks pretty nice with the red and black!! We just got our Black 2019 Chevy Colorado Z71 and will slowly do some changes too!!

[@HorsePowerObsessed]

Thank you! They are great trucks and are very fun to mod! 👍👍

[@joeeasterbrook478]

Do these tail light cause hyperflash?

[@HorsePowerObsessed]

No. I have an updated video coming soon talking about all the specifics.

[@chrisday5341]

Really loving these videos! Keep em coming!

[@HorsePowerObsessed]

Thank you! 😁👍

[@friend3232]

Have you had condensation issues with your taillights? Just got mine installed and there is condensation in the right one after the first car wash 😣

[@HorsePowerObsessed]

I have not had any issues with condensation. *Knock on wood*

[@larryclark9920]

Specifically, the trim tool you are using?

[@HorsePowerObsessed]

Harbor Freight - bit.ly/2vcQnrf

[@evan6173]

Hey man! The link to the third brake light doesn’t work anymore. Any idea what brand that third brake light is? I’m struggling to find it online. Thanks)

[@HorsePowerObsessed]

amzn.to/3RulbbT

[@thess5347]

The tail lights and 3rd break light make the truck look sporty. They look like the same as Matt's, I've been wanting that to be my next project on my 2017 Colorado. Have you had any problems with the 3rd break light leaking, I've heard about that happening a lot. The fenders look much better with the black.

[@HorsePowerObsessed]

Thanks, man! The tail lights do have some issues, but I will be making a video soon on the simple things you can do to make sure they don't leak and don't have any problems. Matty got his tail lights after I did but he went with a more tinted version.

[@metalmanhawaii]

Did you notice any loss of radio reception with the stubby antenna?

[@HorsePowerObsessed]

I have noticed no difference in reception. 👍

[@Dracolinguist]

I just got the same third brake light and it came with a different connector did you have to put an adaptor on yours?

[@HorsePowerObsessed]

I did not. Did you get the one for the new Colorado and not the old one?

[@Dracolinguist]

@@HorsePowerObsessed so I actually just checked the part number on the box to my Amazon order and they sent me the wrong part.

[@LC571]

Do these LED lights fit on a 2021 Z71 Chevy Colorado?

[@HorsePowerObsessed]

Yes they sure do.

[@loganrickmon9556]

Did any of the tail lights from amazon experience any trouble with water damage? Looking to buy the set for my Colorado and just want to know if I need to take any precautionary measures to prevent leakage.

[@HorsePowerObsessed]

Yes. I have a video coming soon talking about the issues and how to (easily) fix them.

[@tommyforbidden3219]

I have a 2018 canyon will those fit mine can I order the from the links u put up?

[@HorsePowerObsessed]

The third brake light and led brake lights WILL fit the canyon as well! Verified!

[@HorsePowerObsessed]

Edit: verified fitment. The links will work for you as well.

[@tommyforbidden3219]

@@HorsePowerObsessed Thank u very much man 👍👍👍

[@HorsePowerObsessed]

@@tommyforbidden3219 you're welcome!

[@s.scratch7451]

Where did you get the fender flares from and how much were they?

[@HorsePowerObsessed]

I got them from amazon. You can find them here: OEM fender flares - amzn.to/2u2EH6f

[@UpNorthMotorsports]

I like those taillights most definitely going to be one of the next mods I'm going to do. Love it on the red of your truck.

[@HorsePowerObsessed]

Thank you! They are one of the best mods I've done yet. They really do look amazing.

[@georges4562]

Any radio reception changes with the stubby antenna ? Looks good

[@HorsePowerObsessed]

None that I have noticed.

[@jfraz6246]

Has that 3rd light worked well? It had some mixed reviews

[@HorsePowerObsessed]

I have had no issues with it. I know of a few other people who had leaks but mine has been solid!

[@mofisher6994]

Hey have you had any issues with cops and the taillights? They put a warning on the box saying basically they are illegal but they seem reflective and definitely visible from 1000 feet. I dont see any issue but have you had any and also will it pass an inspection

[@HorsePowerObsessed]

I have had no issues. I've passed inspection once with them already without any question. They are brighter than stock so they are definitely visible from 1000 feet.

[@mofisher6994]

That's what I thought as well, they've much brighter and visible. I think what they are looking for is the ones with smoke outer glass rather than just kinda of a black mouldings inside. Thank you for getting back to me so fast, these are gonna look great on the orange Colorado!!!😁

[@buffalosoulja1131]

I’m having trouble taking the harness off, any suggestions?

[@HorsePowerObsessed]

Which harness?

[@0426dav]

Very good video, The after market Taillights look sharp,Thank You for posting.

[@HorsePowerObsessed]

You're welcome! Thanks for watching!

[@ironfists06]

Will the tail lights fit the 2020 model?

[@HorsePowerObsessed]

Yes they sure will!

[@gvsukids]

Heard resisters fail on the tail lights, will the grease help with that?

[@HorsePowerObsessed]

I've never heard the resistors failing but water getting inside of the wires would cause some shorting out to happen. The grease and silicon definitely stops that as long as it's applied correctly.

[@_mikeyomega]

Hey love the channel just have a question on these taillights. I purchased the same ones and install them two days ago and now they have condensation in one of them.Have you had this problem and is it normal?

[@HorsePowerObsessed]

I've never had condensation in mine, but I did have an issue with the wiring that I'll be making a video of soon.

[@thisnamealreadytaken]

Really have been enjoying following the 2018 Colorado mods. The part you link for the vanity lights is no longer available from Amazon. I looked for a replacement but I’m somewhat confused. The linked part is 30mm but some of the others which say they will fit are 28mm or 29mm. I was hopeful you’d be able to recommend an alternate part. Thanks.

[@HorsePowerObsessed]

Thanks, man! These ones will work: amzn.to/2Q8IFsu

[@brandonoka5911]

Awesome job on your Colorado. Does your tail light housing sit flush to your truck? For some reason mines does not.

[@HorsePowerObsessed]

yeah they sit flush... how much does yours stick out?

[@brandonoka5911]

The tail light sits like 1/8 inch above the tail light molding.

[@daeway4452]

How are the tail lights holding up I’m thinking on getting these for my truck

[@HorsePowerObsessed]

They are holding up well! They had an issue with water that I fixed in a very easy way and I will be making a video of said fix soon! I love them though, totally worth it.

[@MikeyRhoades]

@@HorsePowerObsessed What did you do fix them?

[@Gator_64]

I just got the flares for mine and will be putting them on this weekend. I want to do the double sided tape for the rear like you. So what brand and type did you use?

[@HorsePowerObsessed]

I would definitely recommend doing it this way. I used the 3M tape linked here: amzn.to/2CARIJc I have used this stuff a lot in the past and it is without a doubt the best double sided tape I've ever tried... and I've tried A LOT.

[@Gator_64]

@@HorsePowerObsessed thanks man! I will definitely use that!

[@HorsePowerObsessed]

You're welcome! I'd highly recommend it!

[@jblockjblock]

HorsePower Obsessed has the tape held us well vs the screws on the rear fenders? How long has it lasted so far. Tackling the fender flares this weekend. Thanks!

[@Gator_64]

@@jblockjblock I bought the tape he used and have had it on my truck for over a year. I can say it's still holding strong. Even in the Florida heat.

[@josesantos8792]

Will the flares fit on a 2018 Z71 Colorado?

[@HorsePowerObsessed]

Yes they will. I have the same year and same model.

[@michaelvaldez4576]

Nice video...did you notice a difference in the signal when you swapped out the antenna?

[@HorsePowerObsessed]

I didn't notice any difference.

[@groot5441]

Getting me new 2020 Colorado midnight edition.

[@HorsePowerObsessed]

Very nice! 👍

[@jeffreytongcua9082]

Thank you for this video, I like those fender flares you got! I have gmc canyon 2016, is that fender flares fit in mu truck too? And where can i buy those fender flares the one on the link says they cant shipped that here in canada SK I really like those fender any idea where i can buy? Please and thank you 😊

[@HorsePowerObsessed]

I don't think the Colorado flares fit the canyon. You should be able to find them on GMs accessory page.

[@j.vazquez1752]

Excellent video !👍

[@HorsePowerObsessed]

Thank you!

[@Pilot_Muffin]

Hey man! Did you do anything special to the third tail light to prevent that from leaking around the edges?

[@HorsePowerObsessed]

I didn't at first but I just recently had an issue. I will be making a video showing how to fix it. Stay tuned!

[@rickcroll1366]

I put silicone around the base. I squeezed out about a half inch bead all the way around because the base does not fit flush against the body. I haven't had any issues that I can see so far it's been about six months. There is a gasket available but since the light isn't flush you would still need some silicone.

[@muribe8370]

Will you be doing the lift yourself?

[@HorsePowerObsessed]

I don't think so. I've never done one before so I think I'm going to leave it up to the professionals but I am going to be filming the install!

[@muribe8370]

@@HorsePowerObsessed sounds good! Excited to see the outcome! How long are you going to keep us waiting???

[@HorsePowerObsessed]

Hopefully not too much longer! Unfortunately I've had some trouble locating some parts that I need so I'm not 100% sure.

[@ezauto2960]

Truck is looking good👍 you should put on some spacers

[@HorsePowerObsessed]

I might get some 1.5" spacers but I'm toying with the idea of going completely aftermarket.

[@ezauto2960]

Gotcha, I have the same truck I’m also planning on getting spacers and fender flares and probably the blacked out headlights and taillights

[@HorsePowerObsessed]

I'm thinking about the headlights... Already thought about the spacers. Not sure what I'm going to do yet.

[@scottmcmanus7799]

Hey man I bought my 2019 Chevy Colorado back in March and I love your videos. The mods you have made look great. But I have been hearing that adding the leds can cause issues with the electronics in the vehicle along with the remote start. Have you experienced any of these issues or how did you keep them from happening. Thanks for any reply.

[@HorsePowerObsessed]

Thank you. No I haven't had any issues. Everything had been great!

[@eduardopena9326]

Great job, great video, as were the first two on the Colorado's mods. Kinda surprised you didnt swap out the chrome colored colorado emblems on the doors like you did on the tailgate...but truck is looking awaahsome!

[@HorsePowerObsessed]

Congratulations! You're the first one to notice that! I actually did swap them out I just hadn't yet in that part of the video! I knew someone was going to notice though! 🤣 You have a keen eye, sir! I definitely love the way the truck is looking it's going to look even better very soon 😁👍

[@wtpence4731]

Lookin' good !

[@HorsePowerObsessed]

Thanks!

[@cobra4246]

thank you for the videos on the Colorado mods I am going to get one soon and I also live in NEPA

[@HorsePowerObsessed]

Nice! Where at in PA?

[@cobra4246]

northeastern Pa larksville @@HorsePowerObsessed

[@Jessouza33]

Is the LED 3rd brake light still standing up? Just wanted your long term review as Matty said it seemed not as good quality as stock. Cheers!

[@HorsePowerObsessed]

It's not. There's a video coming soon but you can easily fix the issue with it to have a stock like experience. I love the look too much to put the stock stuff back on.

[@SK-GT]

@@HorsePowerObsessed Hey Justin what did you have to do? I ordered the same one from ebay along with a "good" gasket from amazon. My bad if I missed the followup video

[@HorsePowerObsessed]

Follow up is coming soon!

[@danielbyrnes2470]

I had the same third brake light and returned it. It’s not bright at all. In direct sun you can’t even see it.

[@paganrythyms]

Go Pack Go! 🤘😎🤘

[@HorsePowerObsessed]

Heck yes!

[@Bryxn-dg2bk]

I don’t have silicone can I use a hot glue gun instead to cover up the wires ?

[@HorsePowerObsessed]

Ideally you want something that will stay pliable and not crack in the cold.

[@elijahgonzalez6667]

can we get an update on the lights

[@HorsePowerObsessed]

Literally working on it now!

[@СергейУткин-щ1у]

Next mud flaps?

[@cpear760]

Has anyone come out with a gear lever mod?

[@HorsePowerObsessed]

There is a guy that changed the lover to a different one but what do you mean exactly?

[@colinmullins9155]

I am planning on purchasing one of these in the next year or so...how reliable is it?

[@HorsePowerObsessed]

I have had no problems at all! Check out my one year review video!

[@colinmullins9155]

HorsePower Obsessed Sounds great. Thanks man!

[@HorsePowerObsessed]

No problem! Thanks for watching!

[@Whitshobbyhomestead]

What does the dealership and factory warranty have to say about the led lights? Whit

[@HorsePowerObsessed]

Nothing at all. If they were to fail obviously GM wouldn't cover the repair for me, but I wouldn't take it in for that anyway.