Installing a Pullout Kitchen Faucet | Moen Guided Installations

[@pauljamilkowski3672]

I'm not a plumber, but i do have basic knowledge of plumbing. If you can turn a wrench, you can install these faucets. Great video.

[@moenfaucets]

Hello @pauljamilkowski3672. We are happy to hear that you enjoyed this video, and thank you for supporting the Moen brand!

[@idolhanz9842]

Thank you for serving as a plumber, a trade few now want to master as it involves work. It might interest you to know it was a plumber who inspired me to join the Air Force after I mastered plumbing and was awarded a degree .

[@k_y_o_t_e_e_6386]

My Moen faucet is now installed, and this video helped every step of the way. Very happy with it. The real work was getting the old faucet out, which was quite determined to stay put and leak and not run hot water. Glad it's out and the Moen is in.

[@faucetmeaning6107]

This was a great, easy to follow guide for installing a pullout kitchen faucet. I was able to do it in about an hour with no problems. Thank you, Moen!

[@craigthorn4328]

Yeah! That would be great if they actually provided you with a support bracket for a single hole application.

[@JohnSmith-td6dn]

I'm a 72 year old female(No I am not John SMith DUH). Still pretty active. Really tired of being scammed by just about every handy/repair/install guy. I love this faucet and I think I can do this myself. I'm ready to try, if I mess up then I'll called one of the above scammers. Really simple informative video. THANK YOU!!

[@BabyGangsterIsMe]

oh no! plz dont do it . They will rip you off... try to do it for couple days to install it. Dont give up

[@hugs_xo]

you really are right. They're scammers. I recommend haggling with them about their fee though lol or tell them from the getgo how much you're willing to toss them.

[@hawaiidispenser]

Thank you! Installed my faucet without much hassle, thanks to this video. The written instructions were pretty clear, but the video makes it even easier to understand.

[@johnmoser1630]

Very, very easy installation. Video is worth every second, well done. I'm not very mechanically inclined, but had this installed in less than a half hour.

[@LDR1100RS]

Very helpful. This is my second Moen faucet and I must say they're well engineered and easy to install. Pro Tip: some older under sink valves might leak during installation. I recommend turning the water off to the whole house if you can, not just the water at the faucet.

[@luiskade7316]

InstaBlaster.

[@realistindenial]

We replaced our old separate faucet and sprayer with a Moen Pullout Kitchen Faucet and couldn't be happier. We repurposed the sprayer hole for an garbage disposal air switch. I would suggest reading all of the instructions and/or watching this entire video before you begin. After several frustrating minutes of trying to tighten the mounting nut by hand, my helper handed me the "installation tool" and said, "Here, maybe this will help." 🤪

[@moenfaucets]

Good morning. Thank you so much for your feedback. Our Product Specialists are available if ever needed in the future. They can be reached at 1-800-289-6636 Monday through Friday from 8am-7pm EST.

[@bethmorano1452]

Oh so this is what it is! I had that same aha moment! I am 71 years old and I just finished installing my new faucet!

[@moenfaucets]

Hello @bethmorano1452. We are happy to know that our video helped with the installation of your new Moen Pull-out kitchen faucet. If you have any additional questions or require assistance with this faucet, Moen product specialists can be reached at 1-800-289-6636 and are available Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@DaruDhillon]

This is a great plumbing video. Be careful about following the advice DIY plumbing videos. Many are not properly done and will cause you leaks. Well done Moen!

[@graffitifreighttrains1076]

Very helpful. Me & the Mrs just installed our new faucet. Thanks a bunch.

[@thegreg79]

Thanks for posting these types of videos. Made the entire process super easy and fast.

[@raymancini1800]

By far the fastest, easiest installation I've ever done. Having everything needed was a bonus. The last thing I wanted was a visit to the hardware store to pick up a hose, wrench, etc. Thank you!

[@wandaa.5947]

This was extremely helpful. I was able to replace my faucet with no problems. Thank you so much for your help!

[@normlor8109]

I just bought a Faucet #87412 and I guess a customer kept those hot& cold tabs because never has any of this great product been missing one part before and I've bought about 20. it took 10 minutes for the great service to let me know they'll be shipped in about 10 days. ....THIS IS GREAT SERVICE 100%!!!

[@moenfaucets]

Hello Norm Lor. We are pleased to hear that you were able to get the missing parts resolved to your satisfaction. Should you require any additional assistance, please feel free to contact us at 1-800-289-6636; we are available Monday through Friday from 8:00 am to 7:00 pm Eastern Time.

[@normlor8109]

I've bought these faucets all of my adult life and will continue to do so!!

[@tracyliu8115]

Simple and clear instruction. I installed 1 faucet myself. Love Moen, good life, good look:)

[@maisakahia4241]

Did you do it that ???

[@BenDover-de7tf]

@@maisakahia4241 stfu

[@evelynvillarreal7570]

Thank you for this video; I installed the pull down hose in 5 minutes and saved $195.00 :)

[@moenfaucets]

We're happy to hear it, Evelyn! Check back often for more helpful videos.

[@kryptoknight.]

Me too!! I will always buy Moen!

[@Bad_Samaritan]

My pullout hose only lasted 4 years and started leaking in the middle. Home Depot does not sell replacement parts. Poor quality.

[@Powerstroke98]

@@Bad_Samaritan Our previous Morn tap set like this eventually the handle gave out. Moen sent the replacement parts, which I put in myself. Worked for another year, and it similarly broke again. I'm hoping new tap sets are even better now, as they would be aware of any deficiencies in their product and redesign as needed I'm sure, so I will purchase their products again. We're on our second Moen kitchen tap set, and this one has worked flawlessly to date and has been in for well over a year now.

[@oaktree1628]

My handyman is charging $300 to install this.

[@BrianMason3636]

This video seems very straight forward. I’m installing this in just a few short hours. I’ll follow up with a comment here this evening to let everyone know how this goes, but I don’t expect any issues.

[@maramalfoy7630]

Are you in the psyche ward from trying to install it?

[@stevenanderson3256]

This video helped tremendously. The install went smoothly. However the lever motion is from straight up to 90 degrees forward. All other sinks have been 45 degrees either way from vertical.

[@RichRobles]

This was very helpful and easy to follow. Thank you. You saved us money in labor.

[@jimholloway1785]

Great video, I am sure I will be able to do this by myself and save the cost of getting a plumber out to my home to install this. All the steps were very clear and easy to understand.

[@m.icha-elawakened116]

Appreciate the video. Finished in 15 min

[@harjitsidhu6641]

Thank you. Your step by step was really helpful.

[@btripodina70]

Installation was extremely easy. The faucet itself has a much better feel of quality than other name brands. We will be switching all faucets over to Moen

[@gonzaloramirezperez617]

Hi I'm from Mexico and the video was very good for me

[@mskittie7411]

this video convinced me i could do it. bought Moen faucet put it in yesterday. last night all was well. today no hot water. husband was right should have left fixture alone. plumber bill to come. sucks

[@Lawliet734]

+mskittie7411 What was the cause of the problem (no hot water)?

[@mskittie7411]

L Lawliet trash in the line, and i fixed it myself. took apart and rinsed well. removed condenser works fine.

[@bobbarker4255]

Excellent! Job complete including replacing both shut off valves in less than an hour! Thank you!!!! And thank shark bite fittings!

[@kashfortheking]

I’ll be replacing my old Moen faucet with a new one soon. Thanks.

[@cameo4]

Great tutorial. Suggest you mark the hot and cold valves under the sink before disconnecting.

[@cliffcarlo180]

Not so great then?

[@ArthurSchwartz1]

Very helpful. We are replacing the hose in the pull down sprayer.

[@buddyvibe9043]

Moen has great products and a fantastic warranty , all the taps in my house are moen

[@davidthompson9359]

Thank you for the great instructions. Question about Step 3, why no plumbers tape?

[@moenfaucets]

Hello David. Plumbers tape should not be used when connecting the supply lines to your shut-off because the supply lines have a built-in washer to seal them.

[@pardwayne]

1:57 - Correct me if I'm wrong, but you need 2 people for that step: one above to hold the faucet straight and one to tighten the nut below.

[@MishaCatz]

I've been able to do it alone. Just tight the washer until it touch the mount washer and tight a bit more. It will stabilise the fosset enough that it won't move.

[@Xenonomos]

I did this now with some help and a normal crescent wrench. You can do it alone, but I found it can come loose again quickly. There are $10-20 ez-change faucet tools you can buy if you can't find a helpful pair of hands.

[@rickl-hp1ih]

Just replaced the hose on my kitchen faucet. It was easy as pie and the best part is the manufacturer replaced it under warranty!

[@moenfaucets]

Good morning. That is wonderful news! Our Product Specialists are always here to help with both replacement parts and technical assistance. We can be reached Monday through Friday from 8am-7pm EST at 1-800-289-6636.

[@tomjoht]

Nice tutorial. I wish at the end they showed the faucet in action. I spent 10 min trying to figure out why water wasn't coming out until I realized that you turn the water on by rotating the handle outward, 90 degrees, rather than rotating it toward or away from you. Should have been obvious, but the outward rotation isn't something I was used to with other faucets.

[@frankm2588]

The innovation a few (?) years ago was to integrate the supply lines, previously you had to buy 2 flexible supply lines. The old Moen I'm replacing came down with copper & you ran flex lines down to the shutoff. The down side is don't wreck the connection since you can't just go buy a new one. Over tightening the supply line connection will cause it to leak, as they say, snug but not overly tight. Sometimes I snug it, maybe on the loose side, turn the water on, check it, if there's a leak, snug it up some more. One time I ruined one by over tightening.

[@moenfaucets]

Hello Frank. If additional installation assistance is needed, please contact 1-800-289-6636 (US) or 1-800-465-6130 (Canada). Thank you.

[@thomaswierman1678]

I am replacing a circa 2004 (I'm assuming since that is when the house was built) Moen faucet. When I looked at the part that holds the faucet to the sink, I could not figure out how it was connected. It was so rusty and the Moen method is weird. After seeing this video, I was able to get the faucet off the sink. The deep socket I have, was not deep enough, so I did the 1/8 turn thing until I could get the deep socket on. Replaced it with a Kohler. Will never even consider a Moen in the future.

[@mycc1694]

thank you moen for making this video i really appreciate such a clear video with such clear instructions. please continue making these kind of videos if possible. once again thank you very much

[@billastell3753]

My son, who has no experience plumbing, installed our faucet in 30 minutes. The old faucet was a moen so all the hook ups matched.

[@jmsigal]

Surprisingly easy too install once you remove the old one, SO be sure to HOLD ON TO THE INSTALLATION TOOL and LABEL IT. Removing the old one was a bitch, because of rust, a deep sink and no space between the sink and the wall. I broke the installation tool and had to buy a deep socket 13/16 socket to add to a socket wrench and an extender. Then I had to resort to stinky (p.u.) Blaster penetrating spray after no luck with WD 40, but it worked in time for Christmas! Hallelujah!

[@moenfaucets]

Hello Jonathan. If additional installation assistance is needed, please contact 1-800-289-6636 (US) or 1-800-465-6130 (Canada). Thank you.

[@jorrba3934]

Great video. I'm canceling my plumber appointment. I Think i could do this. What happen to the plumber putty? I have corian countertops.

[@Powerstroke98]

Putty is an option, but there is already a gasket.

[@cavscout888]

@@Powerstroke98 Only four years too late for that info. ;)

[@kdcraft89]

I would like to know if the pullout kitchen faucets, specifically Brantford, can be used with an on-demand hot water heater. I bought this quite a while ago, but it is still brand new in the box. A family member came to live in the house, so it was never installed. It's not the newer models with voice control, etc, just a standard model. Low flow taps often don't run enough volume for the water heater to deliver hot water. The current faucet works fine with hot water, so I don't want to take it out if this won't work with on-demand. It's a 15 year old water heater, but not heavily used until the last three years by one person. Good video!

[@moenfaucets]

Hello kdcraft. Yes, Moen pullout kitchen faucets can be used with an on-demand hot water heater. If you need further assistance, please email us by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our business hours are Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@kdcraft89]

Thank you! @@moenfaucets

[@moenfaucets]

You’re welcome. It was my pleasure assisting you and thank you for supporting the Moen brand!

[@robframe134]

Should we use plumbers putty ? Great video

[@moenfaucets]

Hello Rob Frame, plumber's putty is not used to install the hose kit to the wand.

[@Latz51]

Thanks for the easy assistance.

[@moenfaucets]

Hello @Latz51. Thank you for supporting the Moen brand!

[@r.emanuel2783]

I had this installed 4 months ago, it was fine untill pressure came extremely low and the spray nozzle doesnt stay on it's own, you have to hold it. They shipped us another same exact faucet. Hopefully the problems are fixed.

[@moenfaucets]

Hello R Emanuel. We are sorry to hear of your experience with your Moen pull down kitchen faucet; however we are happy to hear that you contact Moen directly to resolve your issue and the replacement is being sent to you. If further assistance is needed in the future, please contact us directly and we would be happy to assist you.

[@miyoshiumeki]

Excellent installation. It was so easy.

[@ephraim2793]

Very helpful! Thanks :)

[@mariodelrincon1942]

W here can I get the wrench to tighten the assembly. .the whole thing is loose after a “qualified” service rep. Installed this faucet about one year ago.

[@moenfaucets]

Hello Mario. If you no longer have the installation tool that was included with the faucet, a basin wrench or 13/16 deep well socket wrench can be used to tighten the mounting nut. For further assistance, please send us an email by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our current business hours are Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@SammybonesDIY]

Good video. I just posted a repair video with a Moen Extensa kitchen faucet and it was really easy and fast to repair.

[@scoobydoo93Nathan]

Stupid question, but are you able to put a water filter on these types of faucets? I just replaced mine with this exact one a few days ago. And I forgot about wanting to get a filter selected with this new faucet until after I'd gotten it all set up.

[@moenfaucets]

Hello Scoobyfan 93. Moen Pullout and/or Pulldown style kitchen faucets have not been tested or any of our products potential compatibility with attachable water filtration devices; therefore, we cannot recommend any of our products to be used in this manner.

[@perlman-t2g]

Thanks. Between this and the installation booklet, it was easy to install. Except for for me pretzel bending under the sink cabinet.

[@moenfaucets]

Hello @perlman-t2g. We are pleased to hear that the included installation instructions and our KZbin video helped you with the installation of your new Moen Pull-out kitchen faucet! Working inside the sink cabinet, under/behind the sink and while laying on your back can truly be the most challenging part of a kitchen faucet installation. We appreciate you choosing Moen products for your home!

[@cliffcarlo180]

If only things were that simple. Today's kitchens have pipes coming in and out from 3 of 4 directions not to mention all the drainage from a dishwasher, washing machine, and the sink itself. Easy to fit if there is nothing at all in the way, like in this video.

[@Davilow]

While running the faucet the end of the hose that connects to the Duralock fitting popped off. After cleaning up the resulting mess/flood I reconnected the hose to the Duralock fitting, but when I turned the water back on the hose popped off again. These Duralocks are made of plastic and are very fragile. Would be a much better product if they were made of metal.

[@vtbarcenas8359]

Nice step-by-step instructional video. Can I hook up my portable washer hose to my kitchen sink with this new faucet? I used to be able to hook up my washer hose which has a connector to my old sink faucet that had a removable nozzle via that connector. The workers just changed my kitchen sink faucet to Moen in my apartment. Show me, please, how to hook up my washer hose to my sink since I have now Moen that doesn't have a removable faucet nozzle. Thank you.

[@moenfaucets]

Hello VT. Moen has not tested any of our products potential compatibility with portable washers; therefore, we cannot recommend any of our products to be used in this manner.

[@vtbarcenas8359]

Moen thank you for your response and recommendation.

[@rs319746]

I thought the support bracket would be included in the box. Where can I purchase the support bracket?

[@moenfaucets]

Hello Rocky. The mounting bracket, Moen part number 176787 is not required for standard installation; therefore, it is an optional part that can be purchased separately. The Moen part number 176787 can be purchased directly through Moen or through your local/on-line Moen distributors.

[@Tolg]

Great easy install. Too bad almost no HOT water is coming out. Now what? I even tried running the cold water through the hot water side to try to clear it out, but no luck.

[@moenfaucets]

Hello Tolga, it sounds like we need to do further troubleshooting on your product, please contact Moen directly at 800-289-6636. Our business hours are from 8 am - 7 pm EST Monday - Friday. You can also send us an email at the link below: www.moen.com/customer-support/contact-us

[@RyanMacIntyreCanada]

Tips on how to fix when it starts leaking? (not leaking where it screws on, it's leaking where the metal ball swivle meets the hose)

[@moenfaucets]

Hello Ryan, there is a washer located between the spray head and the hose kit. The issue may be that the washer needs to be replaced.

[@RyanMacIntyreCanada]

Appreciate the reply, thanks for this!

[@carolinayankee2348]

How to tighten the upper gooseneck on the Moen Haelyn pulldown kitchen faucet???

[@moenfaucets]

Hello carolinayankee2348. We are sorry to hear the spout for your Moen Haelyn is loose. We would be happy to help and troubleshoot the issue. Please email us by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our business hours are Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@mysliec.]

Great great installation video

[@wallysworld5518]

Very easy to install save your money and do it yourself!

[@a_Montana_Forester]

Can the faucet handle be mounted on the left side? What would be the down side?

[@moenfaucets]

Hello Dale. The handle operation for our pullout and pulldown style kitchen faucet can not be adjusted for left side mount. The handle needs to be installed to the right or in the middle with the handle facing to the front. If you have any further question, need technical or warranty assistance, please email us by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our business hours are Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@videocreationsbyjohnrenzi]

Just a simple question on a spec for the Moen 7594SRS Arbor One-Handle High Arc Pulldown Kitchen Faucet. The spec sheet says it is designed to be installed thru a 1-1/2" min diameter. The hole through my 1-1/4” thick Cambria countertop is 1-3/8” diameter. It appears from the product description and this video that the water lines plus the threaded hose conduit should fit through my 1-3/8” diameter and not really require exactly a full 1-1/2” diameter hole. Is this the case? I have not bought the unit yet and just need to know first.

[@moenfaucets]

Hello. Our spec sheet does recommend 1 1/2” minimum diameter hole to allow some room when fitting the water lines and threaded hose into the counter top. It may fit snugly into the smaller hose size but Moen would recommend staying with what the spec sheet advises.

[@videocreationsbyjohnrenzi]

@@moenfaucets Thank you for the quick reply.

[@bluwng]

Can you still the bracket if it’s greater than 1/2 “ thick?

[@moenfaucets]

Hello bluwng. The optional mounting bracket (support bracket) is designed to be used for thinner deck installation. Installing the mounting bracket on thicker deck installation, may result in less threads to tighten the mounting nut. For further installation assistance, we would suggest contacting Moen directly.

[@kristamitchell634]

Like Jacob, I also let go of the hose and it retracted back into the body of the faucet and I can't get it out. I've tried pushing it up and it is getting intercepted by the slope of the faucet. And, I can't pull in down because the head of the hose is larger than the pipe opening. Any suggestions for recovering it?

[@moenfaucets]

Hello Krista. In order to make any type of suggestion to resolve the issue you are experiencing we would need additional information. Please contact our Consumer Services department at 1-800-289-6636; we are available Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@nono559]

What should I do if the faucet I bought didn’t come with any hoses? Nor any labels on which one is hot or cold. Should I just use the old ones?

[@moenfaucets]

Hello non0559. We would suggest contacting Moen directly for assistance. You may contact us directly at 1-800-BUY-MOEN (1-800-289-6636). Our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday Eastern Time

[@airdaff4973]

Don't try contacting them. You will be on hold for hours with no results. Put your moen in the garbage.

[@melodyginn3875]

Great video. Easy install.

[@waltheisenberg5620]

Did Moen ever make a pull out sink with a twist lock spray head? Mine cracked and is leaking. It's about 7 years old.

[@moenfaucets]

Hello Walt. Moen’s CFG Baystone and Edgestone faucets include a twisting spray head. If you would like assistance determining the model/manufacturer of your faucet, please feel free to contact us at 1-800-289-6636 (US) or 1-800-465-6130 (Canada).

[@thefrancs8622]

I have a pullout faucet just like the one in this video. It was installed in a kitchen remodel in 2013. The hose developed a rip and was leaking when the hose was extended and the water was on. I ordered a replacement hose and received it today. The hose was perfect until I attached the spray wand and went to put the wand in the holder. The attachment end of the hose has been redesigned and the wand will not go all the way into the holder. The new hose I ordered is part #150259. Please help...

[@moenfaucets]

Hello. We would be happy to assist you with determining the correct hose needed for your Moen kitchen faucet. Please call us at 1-800-289-6636; we are available Monday through Friday from 8:00 am - 7:00 pm Eastern Time. If you would prefer, you can send us an email at [e-mail]; include the full name of the product purchaser, the address where the faucet is installed, a full product view picture of the fixture and a copy of your purchase receipt.

[@thefrancs8622]

@@moenfaucets Just installed the correct replacement part and it works like a dream. Thank you so much!

[@Kelovalintino1]

​@moenfaucets I have the same problem. I bought it from home depot 5 years ago. Water is coming through the hose when I pull it out. Please help.

[@taniamartin7287]

How do I tighten a loose base without that grey tool?! I can’t get my hands in there

[@moenfaucets]

Hello Tania. The majority of the installation tools included with Moen kitchen faucets are equivalent to a 5/8” deep well socket wrench.

[@tommathews5484]

Moen Cleo CA87011SRS: looks like the handle cannot be installed to the left.

[@moenfaucets]

Hello Tom. You are correct. Moen pull-down kitchen faucets that have side mounted handles can be installed with the handle on the right side or in the front/middle. The way the handle operates cannot be changed to accommodate a left side installation. If you have any additional questions, please call us at 1-800-289-6636; we are available Monday through Friday from 8:00 am - 7:00 pm Eastern Time. You can also send us an email at the following link: www.moen.com/customer-support/contact-us

[@blackhornet25]

What's the purpose of the donut weight on the pullout hose

[@moenfaucets]

Good morning. The hose weight under the sink provides tension on the hose to keep the wand seated properly into the body of the faucet.

[@vadimdzyuban7074]

Where to buy the support bracket ? I didn't find it in the box for model 87316 Series box after I opened it in home. Thanks

[@moenfaucets]

Hello Vadim. I am sorry to hear that the support bracket was missing from your brand-new kitchen faucet purchase. I would like to assist you further. Please provide your address, phone number, email address and a copy of the purchase receipt if available.

[@mrpcakes]

is there such a thing as an extension for the pull out hose. trying to get a longer cable for filling my berkey filter

[@moenfaucets]

Hello. We don't make any type of extension to be added to our hoses.

[@airdaff4973]

"Buy a Moen, get leaks for life"

[@Marlasinger84]

Can you tell me what size the water supply connections are? Looking for a converter for here in Australia.

[@Marlasinger84]

It says 3/8 is that NPT or BSP thread? I purchased a 3/8 BSP converter but that 3/8 is still too wide...

[@moenfaucets]

Hello Darlene. A Moen pull-down kitchen faucet comes with built-in supply lines with 3/8" compression fittings.

[@stephensylvester1834]

Thanks for posting this vid! It really was helpful on the install.

[@billyhands9745]

I installed a Kaden yesterday and it swings back to center. any ideas

[@moenfaucets]

Hello Billy. We recommend ensuring the pulldown hose is not obstructed under the sink. We would be happy to troubleshoot if the issue persists, please contact us directly at 800-289-6636. We are available Monday through Friday from 8:00 am - 7:00 pm (EST).

[@ybrik5937]

On this vid, a mounting bracket is needed if the counter top is less than 1/2" thick. But the current moen kitchen faucets offerings today, there is no mounting bracket, it's just the mounting washer. Why is this so?

[@moenfaucets]

Hello ybrik5. We had a design change to the mounting hardware for our pulldown and pull out style kitchen faucets in July 2018. The long 3 hole mounting bracket was removed and the mounting washer was updated.

[@Journey.8226]

Ok what happens if you install your moen spray faucet. Only cold water comes out. So I tried it again now just got water. Need some help. Thank you!

[@personalfinance-BusinessTips]

I just replace my old kitchen with a Fairbury Kitchen pull out Faucet (4005 series), everything went smooth, except the hot and cold lines weren't long enough to connect to the original outlets. What should I do?

[@moenfaucets]

Hello Ralph. The Fairbury kitchen faucet appears to be an American Standard product. We would suggest contacting them for assistance/suggestions on this faucet.

[@Perspectiv3690]

The hot side tag fell off. Can I tell which side is the hot without it?

[@moenfaucets]

Hello Chris. You can check the supply hoses to see if there is an area of the hose where the hot supply line indicator sticker was located. The hose may be "rough" in the area where the label was attached to the hose. If the faucet is mounted with the mounting shank in the front/center; the supply hose on the left should be the hot water.

[@Perspectiv3690]

@@moenfaucets Awsome thanks. What negatives could happen if I install it on the wrong side?

[@moenfaucets]

Hello Chris. The Moen pull-down kitchen faucet handle pulls toward you for cold water and pushes away from you for hot water. If this is connected and is backwards, you would just need to switch the supply lines.

[@gman77gas]

Waited 2 plus weeks to get the faucet....ready to install and NO supplied nut wrench...

[@moenfaucets]

Hello gman77gas. Please call our Consumer Services Contact Center at 1-800-289-6636 (US) or 1-800-465-6130 (Canada). Thank you.

[@estic0]

When I turn the water on its backing up the hose and not coming down the faucet head! Any ideas 😌? 🤔

[@moenfaucets]

Hello Estic0. If you are getting water to flow out of the pull-down or pull-out sprayer hose and when the sprayer is re-attached to the hose you no longer have flow, you may want to check the sprayer screen washer. Located in the threaded end of the pull-down or pull-out sprayer, if this screen washer is clogged, it would stop the flow of water through the hose into the sprayer.

[@estic0]

@@moenfaucets thank you I have a new head. Which screws onto the pull out bit. The only difference that I can see between this an a identical tap is a little brass part with a hole through it almost shaped like a button, this fits up the pipe where the faucet attaches! This has some movement in it and can quite easily be pulled out where as the other tap (separate sinks) has no movement and the water flows correctly without going back up the pipe. I hope I have made sense. It would help if I knew the correct names and terms 🙄😬...? 🤔

[@moenfaucets]

Dear estic, please PM us a complete picture of the Moen product installed in your home, address where the product is installed, email address, contact number and a copy of your purchase receipt. If you do not have a copy of the receipt, please answer the questions below: What year was the product purchased? Are you the original owner of the product?

[@daddydown3r]

Nice! Very helpful.

[@chuckdevries3244]

Thank you..... Super easy

[@wagih0000]

at 1:40 suddenly appear the third Grey connection hose which does not appear before that moment I think your video was made through different records.

[@raymondnromero3348]

Very informative,THANK YOU! R. N Romero

[@mikehickey420]

I installed the renzo faucet . the weight doesn't tighten up to the hose?

[@moenfaucets]

Hello Michael. We would be happy to help! Please send us an email by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our current business hours are Monday through Friday from 9:00 am - 5:30 pm Eastern Time.

[@ronnytejada7008]

What size is the spray wand threads?

[@moenfaucets]

Morning Ronny. The Moen 7294CSL Arbor pull-out kitchen faucet shown in the video has a pull-out sprayer with 5/8-16 UN 2B threads.

[@jaredmartinez2466]

What size are the threads between the pullout hose and the faucet head?

[@moenfaucets]

Hello Jared. We would be happy to assist you with your inquiry; however further information is needed. Depending on the specific model of the faucet will depend on the hose and wand threads. We would suggest contacting Moen to determine the model installed.

[@curtpark4316]

I did it just like the video but i only get hot water out of my faucet and no cold water.. I upgraded my faucet I had hot and cold before.

[@moenfaucets]

Hello Curt Park. We would be happy to help! Please send us an email by visiting our Contact Us page at www.moen.com/customer-support/contact-us or you can call us at 1-800-BUY-MOEN (1-800-289-6636). Our current business hours are Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@AbuZixer]

the mounting plastic tool broke from constantly tightening the faucet as it gets loose every 2-3 months of usage.. how to: - Solve the issue of having to tighten it every few months - What’s the size if the nut to buy a new plastic tool.. the model is 87982SRS

[@moenfaucets]

Hello AbuZixer. We are sorry to hear of the difficulty you are experiencing with your Moen Elgia Pull-out kitchen faucet. The mounting nut requires a 13/16" deep well socket to tighten/loosen if the installation tool included with the faucet is no longer available. With regard to assisting with the nut loosening, replacement parts would be required. Please contact one of our Moen product specialists at 1-800-289-6636; they are available Monday through Friday from 8:00 am - 7:00 pm Eastern Time.

[@pinchoffat5381]

Hi, we removed the 'hot' tag by mistake. Any way to identify the hot pipe??

[@moenfaucets]

Hello @pinchoffat5381. After installing the faucet body through the mounting hole and ensuring that the on/off handle is on the right-hand side, the hot supply line hose will be the one on the left.

[@melvinnieves9221]

Can I install a clean and pure system on this Moen faucet?

[@moenfaucets]

Hello Melvin, Moen does not support the installation of filtration systems on our Moen products.

[@maryflores493]

Could you identify the model # of faucet? It is the same one that I have and I have the infamous spray head leak.

[@moenfaucets]

Hello Mary. The Moen Arbor pull-out kitchen faucet, model 7294SRS, is the model shown in this installation video. To confirm your model identification, please visit our website at www.moen.com and click on the “Service” option and then choose the “Contact Us” button. You can attach a picture to the Contact Us form so that when we get your email, we can confirm the model number.

[@sku32956]

My new Moen faucet that has a separate sprayer leaks under the sink ,the leak is from the sprayer holding water after use .

[@moenfaucets]

Hi Billy, we're happy to help! Call 1-800-BUY-MOEN to speak with one of our product specialists.

[@sku32956]

Thanks I have figured it out .

[@moenfaucets]

Thanks, Billy! Please let us know if there is anything else we can assist you with.

[@mvd2391]

Billy Smith

[@mvd2391]

It is good

[@leeham5783]

Wow very simple n easy save a lots money, thanks thank you for sharing this video

[@moenfaucets]

We're happy to hear it was helpful, Lee! Check back often for more helpful videos.

[@kellyhowful]

Moen I have this exact brand faucet, but I need to replace the leak in the handle and don't know how to replace the washer, at least that what I think. Please let me know? Thank you.

[@kellyhowful]

Moen I have this exact brand faucet, but I need to replace the leak in the handle and don't know how to remove the washer. I can't seem to find a video an this. Also, there is no screw in the handle of this particular model. Please let me know? Thank you.

[@moenfaucets]

Please call 1-800-289-6636 for assistance.

[@christophermcclellan7958]

did you ever get this fixed? I can't get the washer out either...

[@joaniacuffy1252]

Very informative

[@andybub45]

I am really dissapointed with our moen kitchen faucet. We got it with our brand new house that we moved into. The handle broke off 3 times under normal use because the tiny screw that holds it on kept breaking, a very poor design. In addition, the top of the pull out nozzle was leaky. Today we bought a new Delta faucet and installed it. Not really looking like we will purchase a Moen product again.

[@moenfaucets]

Hello. I am sorry to hear that you have had issues with the Moen kitchen faucet. If you are the original owner of the home, this faucet would have been covered under the limited lifetime warranty. We can offer to send repair parts even if the faucet could be used in the future. Please reach back out to us if we can assist you further.

[@Sal112350]

I have a 20 Moen faucet that uses 1224 cartridge since 2005, when they leak I just clean the 2 rubber gasket with toothbrush and water, put it back, like new again. It happen about 4x only. The 5 shower uses cartridge 1225 cartridge It broke one time and I replace the cartridge. Moen is very reliable, easy to fix faucet.

[@jcasetnl]

Took about half an hour to install taking my time and checking everything twice. The worst part of the job was getting the old faucet out.

[@billysonlinesurveychannel8247]

yep the old faucet took my a good solid 20-30 minutes to get out