Monogram 1/24 NASCAR Miller Buick Driven by Dick Trickle EP 001 (E016)

[@pretzelogic2689]

COVID has got be back to modeling. I'm working on the Kellogg #5 Monte Carlo. You've made me review my work and I see I need to improve. Your video here has given me much more interest in paying attention to detail. Thanks for providing a lot of inspiration to do better.

[@jamesvozar1]

Best year of the Vet such a cool car enjoy that, i remember my dad building a 1/24 mongram stingray when i was a sprout, it was my favorite model. cheers James

[@jamesvozar1]

One point earned for guessing the filler before you told us :)

[@troydowning3302]

Super clean absolute best way to strip paint

[@jollyjakelovell4787]

It is very cool and nice that you call it a Winston Cup car. I like that.

[@abe_fromann]

Thanks for posting this. Looking forward to seeing you finish it up.

[@groogrux4320]

Fantastic video. Love the detail.

[@TheBlueberry606]

It could be the polishing compound residue. Rule of thumb is primer coat, sand, color base coat( flat), setting solution decals softner, gloss coat, polish and try to stay away from gloss paints as decals dont adhere nicely without some help.

[@alvinpowell6189]

I use easy off oven cleaner sprayed into the corner of the kitchen sink and set the chrome parts to be stripped in it and then cover it with a little more cleaner. 15 minutes later the chrome is gone ans so is the clear costing that holds the chrome. For the parting lines on the roll cages i use a Flexifile sander with 320 grit and it helps me get the lines cleaned of and still have the round profile of the roll cage “pipe”. I also cut the cross pipes on the headers off because those were not used a great deal and only select races. They just happened to be on the car Monogram used fro measuring and pictures. Well so the story goes. 😆

[@GrumpyModeler]

I have heard that about the. Ross over pipes. Jim Rodgers at SalvinosJR is now 3D printing a pretty awsome set of headers. I didn’t think about my Flexifile sander, thanks for that!!!

[@Bob0sModelFabWorx]

You asked for a better way to strip chrome. A general rule I use is if after 30 minutes goes by and it's not done, I use another stripping method/product. Not all chrome/plastic is the same so it might take some testing. (That's for "save for info.) Try some Oven Off oven cleaner. I use the lemon scent one that strips my chrome in 15 minutes.

[@GrumpyModeler]

Thanks for that info. I’m going to test purple power this afternoon.

[@morriscustommodelshop8345]

Looking great my friend. Thanks for the tip on the Mr. Surfacer on the bell housing. I use Castrol Super Clean to strip chrome, it works in minuets. Keep up the great work, and have a blessed day.

[@matt88876]

I spray the chrome parts with a dull clear coats makes them more realistic looking

[@bubbapipe]

Lot of clean up but I'm sure you can handle it....yes run spark plug wires..lol Thanks for the video.

[@redcastle12b31]

I usually spray dull clear coat on chrome. It gives an aluminum look to it

[@DeviousPizzaGuy]

I've used Easy Off Oven Cleaner in yellow can to strip chrome from R/C car plastics, and recently I've seen people using Zep degreaser, which seems to work near instantly. No first hand experience with that though.

[@charlesball9977]

Like he said, Easy off in the yellow can will usually take it off in about five to ten seconds

[@bigcharliesmodelgarage296]

Looks great. Thanks for the tips. Quite a stash there 😊😊. Maybe you can do a hobby room tour sometime.

[@THROTTLEPOWER]

I was thinking the same thing Charlie.

[@blackbart8451]

Try super clean at auto parts store takes chrome off in minutes. The stuff is a great cleaner also, takes stains outta a driveway. Use full strength stripping paint or chrome, mix with water as a cleaner

[@THROTTLEPOWER]

That's what I use, good stuff!

[@THROTTLEPOWER]

Just found you and subbed Darren. I'm wanting to build some aircraft on my channel soon but this NASCAR caught my attention.

[@TerryWilsonModels]

I have looked online for reference pics of the motors... i have yet to find anything... i am currently building and Earnhardt 1988 Monte... and i have yet to find anything... where are you getting these reference pics?

[@KHModelWorks]

Great video, and subject. I will wait impatiently for the next installment, I am curious to see how you address the fit of the firewall. And yes, find reference pictures, sadly sometimes these cars are not as well documented as military aircraft.

[@THROTTLEPOWER]

Was thinking the same thing.

[@seansmailes9981]

was hoping you could say where you got the after market decals from. Trying to get Terry Labontes Piedmont car (monogram) but not having any luck. thanks!!!

[@GrumpyModeler]

Sean, I get my aftermarket decals from Mikes Decals. www.mikesdecals.com

[@TerryWilsonModels]

I use purple power all purpose cleaner....to strip the chrome

[@GrumpyModeler]

I’ve head that works. You thing it works better than bleach?

[@TerryWilsonModels]

Grumpy Modeler I have never used bleach but I did build a nascar model my last build and it took the chrome off in minutes...

[@THROTTLEPOWER]

@@GrumpyModeler Yes, the purple or Super clean works better then bleach.

[@yellowcake1320]

Not sure if I missed it.....what metallics? MRP, AK extreme?

[@GrumpyModeler]

I’m using mostly AK Extreme.

[@ThirdGearSpeedShop]

Great series! I'm a new subscriber. I'm curious what your camera set up is.

[@GrumpyModeler]

Thanks for the Sub and the question. Here's a list of my VLOG gear: Canon EOS Rebel SL2 - amzn.to/2Eh4ehB GoPro HERO7 - amzn.to/3hvCmaV Heron - 4FT Desk Mount Overhead for Lights/Camera Mounting Poles up to 3lb Capacity - 4FT Overhead Rig - amzn.to/2CCLyLL Studio Lights - amzn.to/2YxKZYT Ultimate Lavalier Mic - amzn.to/2JO4Sae AmazonBasics 60-Inch Tripod amzn.to/2EcMzHW I also uploaded a picture in the community section that show the set up. Hope this helps! I subscribed to your channel too.....very cool stuff!

[@ThirdGearSpeedShop]

@@GrumpyModeler Thanks for the info and the sub!

[@mikejungferman4744]

LA's Awesome cleaner from dollar tree, Easy off, or purple super clean all gets chrome off plastic

[@douglasmitchell5033]

So Have you do a car that you have worked on?

[@kevinbuzzard3434]

You can use purple power or super clean

[@TerryWilsonModels]

In my experience, those injection marks on the four corners of the chasis is pretty tough to get at. What did you use to get those out?

[@rcpete7055]

Not seen any new uploads for a while?? 😊 👍 Bring us some new builds buddy😉😎

[@charlescampbellii8193]

Think windex work for removing chrome

[@tlclstuff]

Good stuff :) Don't mind the 30min vids, it's the over an hour vids that are sometimes hard to find time to watch.

[@THROTTLEPOWER]

Very true.

[@Bob0sModelFabWorx]

The link for the cups is not there or broken.

[@GrumpyModeler]

I’ll take a look at that

[@matt88876]

could you build the F-14 tom cat ??

[@danfirkins6109]

If you can find super Qlean by Castrol or purple power little strip chrome in five minutes

[@troydowning3302]

And chrome

[@charlescampbellii8193]

Not windex it was 409 cleaner

[@toddw6716]

Brake fluid works