All those parts etched with visible company logos..... seems buyers should get a monthly stipend for the advertising.
@johnc6380 Жыл бұрын
Does your solid gauge mount bezel fit the Dakota Digital gauge pod?
@TEXAS_BAGITO2 жыл бұрын
Team HP: Congrats on your new product release
@MoonshineHarley2 жыл бұрын
Thanks JR
@monsride10 ай бұрын
can these fit on a Roadking Special?
@This_is_My_Story Жыл бұрын
I ordered your kit from your website and received the kit. As I couldn't find the lower lower bottom tree clamp from your website to complete the kit I ordered the lower wolf tree from Kraus direct. During the install I couldn't install the lower traa to the top as the Yoke supplied from Kraus is about 1mm thicker. Do we have to purchase a different yoke nut? So for the time being I have installed the stock lower bottom tree until I can try I figure out a solution.
@Nick.2142 жыл бұрын
What size bars and risers are on the solid mount kit in video?
@MoonshineHarley2 жыл бұрын
12.5 total 10” pullback risers with 2.5” Fly bars. You can purchase at shop.moonshineharley.com > click MHP Parts
@ronnierivas54782 жыл бұрын
What bars?
@mattneiderer22032 жыл бұрын
Is the radio very visable with your setup? Also i have a 37” sleeve length and is it worth me getting a pullback? I like to ride with my elbows slightly bent. Im stuck on what size risers i should run.
@bassops1373 Жыл бұрын
I have heard a lot of nice things about Krause. I like your ideas with the wolf one set up. Have you guys ever thought about having an optional wolf one gauge mount that sets the gauges a little lower on the handlebars instead of right in the middle?
@donschlegel19722 жыл бұрын
Nice looks good can you turn the handlebars without your opposite hand falling off the handlebars do they come back far enough for you to be able to do all kinds of manoeuvres and in tight situation
@abdallahmoussa1983 Жыл бұрын
good idea but still no kit for similar bars without compromising the gauges or the radio screen!
@willyafg2 жыл бұрын
Would be nice to put these on the FRONT of the bars BUT it would interfere with the road glide standard's fuel tank access when you pour gas. I like being able to see my handlebar and clamps as they are actually good looking. Putting the gauges on the BACK of the handlebars will block some of the boom screen, as mentioned in this video. Harley needs to change up the fuel access on the RG standard like it did for the RG special. I love the riser and bar set up. Looks great and super comfy
@extremebaggers78172 жыл бұрын
Change your tank over. Get most money back selling your old tank
@willyafg2 жыл бұрын
@@extremebaggers7817 good idea. Easy fix
@richesposito93842 жыл бұрын
depends on height of risers. I have this setup with 8" risers and theres not enough room to mount gauges in front. I think 10" or more and you should be ok.
@willyafg2 жыл бұрын
@@richesposito9384 im 6'2 and would need my bars around 14" high. Think ill be able to squeeze the gas pump in just barely
@donschlegel19722 жыл бұрын
Can you turn the bars with out You are opposite arm falling off the handle grip
@telace1 Жыл бұрын
Does the wolf 1 kit come with the ERG bars?
@warsteel12 жыл бұрын
Always the best info videos..great new product
@cheby562 жыл бұрын
Although this looks different than many other builds I don’t understand why you’d want to cut off view of your screen. Do you really need a separate gauge cluster? Might be for some but I’ll pass.
@MoonshineHarley2 жыл бұрын
This setup is for those that want quick view of gauges. Lookin to far down isn’t as easy or safe while pushing the motorcycle.
@rob20443212 жыл бұрын
What’s the highest set up you can go with Kraus t bar
@austinap22482 жыл бұрын
What video shows this set up on a Street Glide. ?
@duffy12982 жыл бұрын
I called the shop trying to get a quote on a Kraus T-bar installation, was transferred to parts, who didn’t know. 🤷♂️
@MoonshineHarley2 жыл бұрын
Sorry, we do have a couple newer team members in training. Please ask for the Horsepower Team next time 615-274-4170. If you email us your phone number one of us will call you to discuss. Email: Horsepower@moonshineharley.com
@extremebaggers78172 жыл бұрын
1.5” diameter bar would be sik
@MotoTvWoodsFarm2 жыл бұрын
nice professional presentation.
@ecrusch2 жыл бұрын
Kinda seems like those would vibrate like crazy the farther you raise them on those stalks.
@MoonshineHarley2 жыл бұрын
No vibration issues. The poly riser bushings are under the bars and gauges.
@shanethedestroyer2 жыл бұрын
Hey, can you do these bar kits on a soft tail? Like a Low Rider S or a Fat Bob?
@bigbob212 жыл бұрын
I’ve seen them do it on builds but no explanation on if the wiring is the same or if they spliced the two harnesses together 🤷♂️
@talkingrock70112 жыл бұрын
You are a top service shop thanks for your dedication
@samsanders84942 жыл бұрын
Friggin genius!
@Ta53508 Жыл бұрын
I love it
@AVERT-2 жыл бұрын
I LOVE IIT
@railking72182 жыл бұрын
Great looking product fellas. Curious what the mirrors are on the RG with your new gauge demo? Love the channel and keep up the awesome content! Big fan from Canada.
@MoonshineHarley2 жыл бұрын
Harley-Davidson Rizoma mirrors.
@railking72182 жыл бұрын
Thanks a bunch!
@franklin10462 жыл бұрын
Could you not make it digital like the street bob?
@MoonshineHarley2 жыл бұрын
Dakota Digital makes a digital replacement gauges for this setup.
@jobeta222 жыл бұрын
Thank you. I am a 5.6" rider and my current bar setup is a KST 12" spearhead bar. My arms are slightly bent when in the riding position. Which one of these kits would work for me?
@MoonshineHarley2 жыл бұрын
If your bars truly measure 12” and you like them I would go with the 12.5” setup. It would be a 8 inch kickback riser with 2.5” Fly Moto bar.
@jobeta222 жыл бұрын
@@MoonshineHarley Thank you for the quick response. I will call later today to discuss options. I am planning on visiting the dealership so I can sit on a bike with the bar setup before I decide. I have never seen another bike like mine with T-bars.
@elconquistador99212 жыл бұрын
@@MoonshineHarley, I'm interested in the 8" risers. I almost bought the 10" methods before I saw this video. Do you think the fuel door on top of the dash will have clearance with an 8"? It's a 2019 RGS, the specials then still had the old style dash.
@jimbeam41112 жыл бұрын
Would I need to extend the brake line and throttle wire with the 14.5 or the 12 inch kit?
@richesposito93842 жыл бұрын
Yes definitely
@damion9840 Жыл бұрын
I've had both 14.5 and 12 inch Kraus setups on 22 Road Glide. Didn't have to extend them.
@j4d_james2 жыл бұрын
What happens to the ignition switch with this setup?
@2alphacpa374 Жыл бұрын
It’s deleted and they reprogram the switch to the upper right switch box.
@og1902 жыл бұрын
100% love it
@bigmanchris86932 жыл бұрын
🎯🎯🎯👍🏿👍🏿👍🏿💯💯💯
@GMAC19292 жыл бұрын
If I already have the Kraus Wolf 1 setup on my RGS, can I purchase just the solid gauge mount?
@MoonshineHarley2 жыл бұрын
Yes. We designed the solid mount gauge kit to have the gauge mount and wire extension. This setup was made for riders that already had a Wolf One Kit.
@GMAC19292 жыл бұрын
@@MoonshineHarley That was a super fast response. I looked on the website and only saw the option to purchase the entire Wolf One kit. No option to purchase just the gauge/riser clamp. I'll shot an email to the shop
@TaylorOriginal3522 жыл бұрын
Did you have to remove your ignition switch? Or is it good
@williamnixon2782 жыл бұрын
How about low rise (risers) & standard ape hangers????
@williamnixon2782 жыл бұрын
Really want to do a roadglide fairing delete with a road king nacelle Maybe my local machine shop could cut the risers down
@skulldaddy84312 жыл бұрын
couple of questions. On the stock top of tree there is a ground wire.. where does that go on the Krauss tree? There does not appear to be a spot for it. Second question.. when reinstalling the forks.. how far past the top of the tree should the fork go?
@richesposito93842 жыл бұрын
i have this setup and spoke to others and you don't need the ground wire. if you are replacing the stock top clamp with the Kraus, take a pic and mount in same position.
@skulldaddy84312 жыл бұрын
@@richesposito9384 there was a screw going into the stock tree mount that is not on the Krauss tree. Not sure what to do with that wire and plug.. its kinda a weird set up. Thanks for the reply
@richesposito93842 жыл бұрын
@@skulldaddy8431 yea if its the ground you can toss it. you don't need it
@22BETTERTHANYOU2 жыл бұрын
Can you guys build a bar set up with these wired and ship it to me?
@MoonshineHarley2 жыл бұрын
We can ship but you’ll have to run your wires. These bars are easier than most since they don’t have any real hard bends.
@richesposito93842 жыл бұрын
i have this setup and it was super easy to wire the bars
@vonsamson22092 жыл бұрын
Why anyone would want these bars on a Road Glide or a Street Glide is nonsense but some people like total nonsense lol.