Program car keys in Peugeot & Citroen using Diagbox and PP2000 (Peugeot Planet 2000)

[@Aaaad4m]

@ more molecules What a fantastic upload. Thank you for sharing this valuable information. Thank you for your time and from saving us a costly additional key from dealers. My question to you sir? I am a recent owner of a Citroen Grand C4 picasso 2016 model with a parking sensor issue. I also want to check for other possible errors stored. What version of diagbox do I need and what windows version do I require. The more i read about it on the Internet, the more i am getting confused. Different sites and sellers state it can only be installed on Windows XP Professional 32 bit, some say 64 bit. Some say Windows 7, 8 , 8.1 and 10 and has to be 64 bit. Some say you dont need Virtual machine, some say you do. As you seem quite experienced in using the interface and software. I was hoping you can guide me. I would really appreciate it 🙏 and look forward to your reply.

[@moremolecules]

Many thanks indeed for the good words, I really appreciate them. Your 2016 might be a bit problematic, as PSA might have changed these diagbox devices and only being online, so not free. I think you may be OK, as that change I think was in ~2016 cars. Nevertheless, the Diagbox devices work with Windows 7 and of course XP. Now, you do not need any VM if you have a laptop with the Win7. Most people do not run these old windows machines, so hence one wants a VM to run these old ones. I run a VM as I am using Mac OS X on mine and easier for me to run VM with windows XP, but I know that it works with Win7. I think that Win 7 is the highest OS that can run the diagbox software. I do not think it matters if it is 64 or not, cannot quite remember, but I can check if my win7 is 32 or 64 bit. Hope that helps, but let me know for any additional questions.

[@cemkomsuoglu7919]

Thanks for sharing this, may I ask which version of does your diag box and virtual windows xp 64 or 32 bit ?

[@moremolecules]

It is Windows XP home edition, so 32bit and my diagbox is fairly old now with v5.29. It would also work with Windows 7 as well.

[@gz1719]

Hello ,very usefull video but i have a question from where did you get the car code is it for all peugeots or is it unique for each car ?

[@moremolecules]

Yes, they are different for each car. The car itself came with a key code card. Dealer could, I think, provide the code.

[@gz1719]

So each time we need to program a key wich buy the code or its a hacking process?

[@gz1719]

Thank you so much

[@moremolecules]

@@gz1719 The code is the same every time you want to do it for the same car. Normally these come with the car. As far as I know it is not easy to hack the code, but doable. If you do not have it, it is easier to get it from the dealership.

[@gz1719]

In my car i changed the cover then the remote stop locking and unlocking but the car start normaly what can cause this ,does it needs just programing?

[@rob1891]

Great video, where is a good source for the keys with chip?

[@moremolecules]

For my Peugeot 307 I bought these: ebay.us/tYqQs5 . I do not quite remember, but maybe I filed flightly the groove of the blade to fit although the advert says straight replacement which might have been. This was quite a good key, heavy and solid and have not had a problem with it for about 1 year. It comes with the chip as well.

[@tm2204]

@@moremolecules That link is for a key shell only. No electronics/chip. Did yours come with a 'blank' chip that you thn programmed with PP2000?

[@moremolecules]

@@tm2204 Yeah, I should have said that the link is for the shell only and my replacement thing came as a shell. You could buy the shell with the transponder as well, does not make a difference to the coding.

[@cameroncooper4291]

Good job bro

[@MultiYanly]

Hello, where did you buy the interface cables? Obd2.

[@moremolecules]

ebay

[@batuhansengunlu4268]

Hello, which program do you recommend for my 206 2.0 vehicle, 2001 model?

[@moremolecules]

Ahh, not too sure, but Diagbox/PP2000 should work.

[@brocky78]

Great video thanks

[@brocky78]

Got car key coded running again but didn't do bit at end to do locks they not working do I have to do whole lot again or simpler way please?

[@moremolecules]

No, you do not need to do it again, only holding the lock key for 5 secs or so as in the video. Forgot what the procedure was.

[@davidbolha]

Hi, Could you get that pin key code with like a an Obdstar F108+ reader ? 🤔😕 That is if you don't have the card with the code when you bought the car. Thanks ! 😇🤗 Best Regards,

[@moremolecules]

Yeah, I am not sure. I am not familiar with the F108, but I would venture a guess that it will not be possible (could be wildly wrong 🙂). Auto electricians use some sort of software to read the code, but I do not know what it is. I guess the code can be had from the dealership, but of course one has to pay.

[@ToboSwarley]

Hi, as I understood even if one key is working you need to code it again in order to have another one? There is no way to add only one key to already existing?

[@moremolecules]

Yes, that is correct. You cannot just add another one, you have to re-program both keys or three.

[@ToboSwarley]

@@moremolecules thank you very much!

[@mladjancvijanovic4313]

Hello, is it possible to reprograming used key on this way. Or it's need to be new key?

[@moremolecules]

Any key can be programmed this way, old or new, but make sure all keys are programmed at the same time.

[@de-kat]

Hi, my key has stopped working and now I am searching how to get a new one, my dealer is out of business and i have no key card, can I just go to any other citoren dealer and ask them to program me a new key or is the car now unusable?

[@moremolecules]

Yes, any dealer will be able to do that, you do not need to go to your original one.

[@pifandrei5743]

So my transponder pin has letters on it also. Is that allright? Or i got the wrong pin?

[@moremolecules]

These are different letters, you need the manufacturer's code rather than the transponder letters on the chip

[@frijus100]

after i program keys and when i use remote to lock car i get three codes u1118 p1693 u2001

[@moremolecules]

Did you try the holing of the button in the car thing as in the video for both keys?

[@kouideraissaishak7431]

Hi MRE molecules. Sorry for getting off topic. But I need your help. I have a Peugeot 207 with a 1.6 hdi engine. When i change the transmission level while driving, a pile of black smoke comes out and then disappears. Where could the defect be?

[@moremolecules]

Heavy black smoke would mean either too much fuel and little air. Most likely there is little air coming. Is it at every gear change when you change and press the accelerator pedal? Maybe the EGR is sticking a bit or the wastegate is a little bit late to open up and let the turbo spin. Have you change the air filter lately? I would say plug it in in Diagbox or OBDII scanner and see if there are any error codes.

[@kouideraissaishak7431]

@@moremolecules I want to add that there is an oil leak from the PCV valve. Do I have to change the rocker cover ?

[@kouideraissaishak7431]

@@moremolecules I find this error code: p0299. P0405. P1351. P2143

[@moremolecules]

@@kouideraissaishak7431 Yeah, you have two for the EGR and glow plugs. I would not worry too much about the glow plugs, as they are only needed for very cold starts. You may need to see about cleaning or if that does not work replace the EGR valve. If you replace it then you need to recalibrate it with Diagbox interface. If I were you I would first open the EGR valve and give it a good clean and see if that changes anything.

[@moremolecules]

@@kouideraissaishak7431 Are yoiu certain it is coming from the rocker cover or the PCV valve hose connection? Maybe have a look here and just replace the rubber o-ring: kzbin.info/www/bejne/sJqug2mDa7miick

[@craigkidman]

Does pp2000 tell you if ask or fsk modulation thank good video

[@moremolecules]

Pardon my ignorance, but what is fsk modulation. I do not think it will tell you that, as I have not seen anything related to modulation.

[@craigkidman]

@@moremolecules there two types of key 325 365 fsk and ask

[@moremolecules]

@@craigkidman Yeah, it would not tell you that, otherwise I would have seen it.

[@craigkidman]

@@moremolecules thank I programed one I started car but not open doors put in ignition turned and held lock ten seconds no joy order another ask modulation and worked fine but no one can tell us them wen side by side think ask modulation is early and fsk for newer thank any way good day to you 😀

[@moremolecules]

@@craigkidman I did transfer all the inside components to the new key, so did not have those problems.

[@nourilo5487]

hey my friend i have a question. how or where can I find my confidential card?

[@moremolecules]

The key card goes with the vehicle. If it has been lost, only the dealership can help and give you the code.

[@nourilo5487]

@@moremolecules ah ok thanks.

[@nourilo5487]

@@moremolecules Is the code not with the ECU by any chance?

[@moremolecules]

@@nourilo5487 I mean the BSI compares the code supplied to the one it already has, but it is extremely difficult to get the actual code from the BSI. There are sites where if you pay you could probably get a useable code. Not too sure how it works though.

[@heksat6768]

I just pay 45 euros for that code

[@DonTuliosS]

I replaced a broken MFD (multi function display) on my 406 clupé with a working one, but now my audio controls under the steering wheel stopped working.. Is there any solution to it?? Please help 🙏 I would really appreciate it, man..

[@moremolecules]

Not too sure, but they are unlikely to be related. I have replaced my MFD and I have not had any ptoblems. I have tried multiple ones due to fading issues, but my controls always worked.

[@DonTuliosS]

Well , my old mfd faded out completely so i decided to replace it wit a new (used) one.. And the steering wheel controls stopped working.. when i plug in the old one , the controls work again.. 🤷‍♂️crazy I would also like to apologise for posting comments about a MFD in this video.. i just thought maybe you'd know. Thanks anyway, i really do appreciate your reply 🙏

[@moremolecules]

@@DonTuliosS No worries at all for posting here. Which controls are we talking about here, the cruise or the radio ones. To be honest, there should not be any difference. What replacement MFD did you buy and have you plugged it alright? Is it actually working the MFD and the controls not? I had installed 5 different on mine and they all worked without a problem. The 3-line ones, is yours 2 or 3-line MFD?

[@DonTuliosS]

@moremolecules the radio controls.. the mfd works fine ,it's just that i cant use the radio controls under the steering wheel 🤷‍♂️ 2 line or 3 line MFD 🤔, what do yo mean ?

[@moremolecules]

@@DonTuliosS I am not too familiar with the 406, but the displays are 2 lines or three lines in the older cars, mine including. Basically, is the MFD one finger height or two fingers kind of thing. In general, there is literally no return connection/data from the MFD to the car's computer, as far as I know. If you have a computer PP2000/Diagbox you can have a look for any settings in there, but I have not seen any. Is the replacement from 406?

[@shakalpb1164]

Wher did you buy your Diagbox?

[@moremolecules]

I got it with the interface from ebay, but any torrent will get you one

[@shakalpb1164]

@@moremolecules thank you for the answer! How much did you pay (if you remember)? Best wishes from Austria

[@moremolecules]

@@shakalpb1164 No worries, I try to reply whenever I can. I bought it quite some time ago (2012), so difficult to say how much it is now with inflation and all. I bought it for £110, but I bet it is a bit more expensive now. They are all the same, so whatever you get it will be the same cheap Chinese versions. I was just starting at the time with my car so bought a bit more expensive version, but now I know better, as they are the same.

[@peterboden6130]

I am ordering keys to my 307 now@@moremolecules

[@genesis2s28]

Como le saca el pin code

[@moremolecules]

The pin code generally comes with the car on a credit card like looking card. If you do not have it, probably the best options is to pay the Dealer to give you the code.

[@MsCarService1986]

My friend, you need the BSI pin code on order to program new keys. Is not so simple. But you pretend is simple 😂

[@moremolecules]

What are you talking about. This is my own car with my own keys that I re-programmed from scratch on video and they are working with the only code that comes with the car and that is the BSI pin code. What do you mean I pretend, that is rather insulting actually. I have previously deleted these keys by mistake and they would not start the car of course and that is the way to program keys for these cars of course.

[@lukaszdanavicius7697]

To get the pin contact the local dealer :). One wanted 30 euros, the other one gave it for free with reg certificate. If it’s this is too hard, maybe don’t use diagbix

[@infinitewars6373]

You have to hide ur code just incase someone will really come and steal it, if anyone would be interested in such idea code will not help😂😂😂😂😂

[@moremolecules]

probably ture that it does not matter is I show my code.

[@RioTintoGoAwayFromDrinaRiver]

Hello, Sir! Can I use that device without virtuel machine? I have old laptop and I want to install new copy of wxp on it. Is it possible run that software on native operating system windows XP without virtuelisation? My second question is: how menu times I can type wrong password without consequences? I got password card, but I never test it.

[@moremolecules]

Yes you can run it without a virtual machine. Password for what?

[@RioTintoGoAwayFromDrinaRiver]

@@moremolecules I am talking about confidental card pin code when you need to programming the keys. I already have mine confidendal card, but I wish to programm keys for another vehicle for wich one I do not know pin code.

[@moremolecules]

@@RioTintoGoAwayFromDrinaRiver Yeah, not too certain how many times you can try. I believe that you can try many times, but difficult to guess the code. You may get locked for a limited amount of time, say 30min or something like that.

[@RioTintoGoAwayFromDrinaRiver]

@@moremolecules Thank's!