1968 Chevrolet Nomad Station Wagon! Will it Run After Deteriorating for 25 Years?!?

I've always wanted to own a Chevelle but could never find one that I could either afford or was worth the effort. But recently I saw this 1968 Chevelle Nomad Custom station wagon in the corner of a photo of a BookeFace MarketPlace listing for some old tractors and hit the owner up to see if it was available. Sure enough we were able to load it up and drag it home! Now lets see if this beast will come back to life after sitting in the trees for 25 years! If you're interested in owning this car in the as shown condition, it can be yours for the low, low price of only $2,250 USD! As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske-repair...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $36 shipped
SS5 0.625" wide long handle $29 shipped
SS5s 0.625" wide short handle $27 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#chevelle #stationwagon #mortskerepair #68chevelle #nomad #chevellestationwagon #landyacht #landbarge #307chevy #smallblock #wagon #grocerygetter #powerglide #chevelless #smallblockchevy #revival #racingstripes #dailydriver #restoration #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic #chevy #steelies #barnfind #abandonedcar #dogdish #v8 #pointsignition #abandonedcar #junkyardcar #junkyard #junkyarddog #duffdog #familytruckster #hubcaps #rochestercarburetor #sparkplugs #transformation #budgetbuild #budget #DIY #budget #musclecar

[@paralyse78]

Just reinforces my belief that if I were stuck in a post apocalyptic zombie wasteland, and could only have one engine and transmission to try to get running to escape the hordes of undead, if a 12 valve pre-electronics Cummins wasn't on the list, it would be a SBC and Powerglide for sure. A caveman can get one running even after 20 years (and possibly 200, with a power source and fuel!)

[@MortskeRepair]

dang right!

[@topaz123212]

Solar, and moonshine, theres all you need to get going haha, these old cars are super simplistic that's why I love my 1972 Yamaha bike, except for the 6 volt electrical haha

[@williambasinger5859]

And why not a 3208 cat? You don’t even need a power source just a good push pop the clutch and away you would go on any oil that will flow through the fuel pump.

[@topaz123212]

@@williambasinger5859 I'm an idiot lol, my 72 yamaha has been getting driven around without a battery for a good year now lol (6 volt battery with cable terminals instead of standard posts)

[@rsprockets7846]

nope take the 250 inch six with a 3 speed for zombie land escape route point dizzy and i BBL carb with a 3 speed wood keep the zombies on their toes

[@braxtonnelson7422]

My first car was a 1959 Chevy Bel Air 4 dr sedan... a "gift" from my grandparents when I turned 16. It had all of the rust you would expect on a 15 year old Chevrolet on the Alabama Gulf coast! The trunk floor was about half there, giving you great access to the gas tank, and there were several floorboards that offered a view of the road passing underneath. It had the 235ci inline 6 with the Powerglide, and my father joked that "it doesn't have enough power to pull a greasy string out of a cat's ass"... perfect for a young guy's first car! I wanted to do the right thing, and change my own oil for the first time, so I got it jacked up and on blocks (safety first) where I could see the drain plug. When I removed the drain plug I thought that the oil looked funny... kinda redish colored. It was my first time ever to work on a car, and it was there and then that I learned that Powerglides were about the only GM transmissions that had a drain plug! It took my Dad a while to stop laughing. For years after that he would remind me of this event... his favorite saying was "next time you change the oil, save the transmission fluid for me".

[@MortskeRepair]

Was time for a fluid flush on the trans anyhow!

[@bobwright992]

Reasons why the oldtimers always zip tied the key to the column.

[@joshgunn2068]

I was worried that Mortske Monday would be delayed again! Thankfully we're back on track. He'll yeah folks, here we go!

[@johncatalano7185]

Hey Mortske: For over a decade, the Chevy Nomad was the flagship station wagon of the Chevy badge... Designed by Harley Earl, other similar models included the Pontiac Safari, Oldsmobile Vista Cruiser and Buick Estate... After a six-year hiatus in '68; the Nomad made a comeback as Chevelles' lowest price wagon...After the '72 model year; the Nomad as repurposed as the Colonnade and the Kingswood was offered in the full sized Belair/Impala/Caprice models... The wagon you have has some nice after market touches like the AM-FM cassette radio and A/C unit to go along with the V8 short block, granny's hair bonnet and plenty of room for the Duffster to stretch out in the back which is good enough for the girls that we go out with in the Duffster Family Truckster......

[@michaelalexander8736]

Hey man interested in the 68 nomad would like to have one

[@briansutton7764]

@@michaelalexander8736 If you're giving them away I'll take two.

[@mrromantimothy]

back in the day we take one of those Oldsmobile Vista cruisers cut the roof off and put it on the top of a van really sweet looking.

[@Farmer101]

The excellent cars mentioned in your ramble through history had a great & glorious death(thank goodness), recycled into new cleaner safer cars not made by union zombies(remember don't buy a yank car made on Friday or Monday). Why were these illustrious cars you talked about had under powered V8s hauling around tanks long enough even Liberace would approve. Called power weigjt ratio the rest of world always understood.

[@jeaniepatterson2384]

I usually start really liking the cars you work on and this one just never got me. I love station wagons too. But you amazed me with getting that poor beat up wagon going.

[@FreedomRock44]

It is so cool how Duff literally checks the cars out as you look at them.

[@MortskeRepair]

We're a team!

[@FreedomRock44]

@@MortskeRepair You guys are....Duff Dog gets after those cars. I swear though when you are in the garage working on the brakes....He likes to inspect your work!!!!!

[@FreedomRock44]

@@MortskeRepair You guys are!!!!! I swear when you guys are in the garage and you are working on the brakes for example Duff Literally Inspects your work. It is a hoot!!!

[@donaldjohnson5633]

I bought a 76 F-250 from my little sister when I first got home from the service. She didn't want it due to the massive oil leak it had. Took it over to a local shop and had them pressure wash the motor to see if we could find the source of the leak. The oil filter had a crack in the side, and was spraying atomized oil under pressure all over the side of the engine. $14.99 for the pressure washing and oil change later and I had a non leaking truck with a 390. Sis told me I took advantage of her and wanted me to sell her the truck back at that point. You know, she could have spent the $15 herself, not bought a new truck and not let that one sit in the back yard for 6 months. I drove that thing for years.

[@johnburch6927]

Yes indeed we replaced alternator bearings back in the day. That's one of the things I enjoy about your program, you rebuild a majority of your small components.

[@dueljet]

I have a 1982 Malibu classic with a 3.8L 229 cubic inch V6. My dad got new and 82. It was my first car back in the '90s and I have never let it go. I have it on my channel but few want to watch. I encourage everybody to check it out when they have absolutely nothing better to do and give me feedback. The car is kind of like a time capsule. Fantastic video as always!

[@waltermichl5999]

As far as I know the "True Dual" thing refers to those cars in the 80's like G-bodies, etc where it was one pipe to the back than then split either in a Y or after the muffler. True Duals would be one pipe from each manifold or header to the back.

[@southernfriedhippie]

I was thinking it was a much older expression. In the 50s it was common to split the manifold on a six cylinder and run dual exhaust. If the manifold wasn't split, you were a poser.

[@Junkyard-Restorations]

it was after 75 when all "performance" cars still had two tips but one converter. a 72 trans am is true dual but a 76 isn't

[@lawrenceedwards6327]

That’s how I remember it. To say you had ‘true duals’ was a matter of prestige!

[@gabrielv.4358]

Makes sense

[@bobwright992]

Their version of an equa;izer pipe LOL

[@petegiles6678]

great potential ,and nothing that can't be fixed I love it.Cars were so much nicer to look at back in the 60's and 70's.Thanks for bring back another one or at least trying to.Yes we watch you here in England we love the american muscle cars even if we could never afford to run them at nearly £2.00 per litre for fuel.:)

[@unknownsoul13]

Just like this section of northern Ontario ...$1.93.6 per litre. And my 2015 Dodge Journey with a 4 cylinder engine took $120.00 Cdn the first time that I filled it this year. Living on CPP&OAS pensions, it gets driven for groceries maybe once a week.

[@gregdiamond6023]

Always teaching on us Mortske. I had no idea the Nomad continued into the 60s. I thought the 50s was it. I learn something new in every video. This is the automotive PBS.

[@wilenelson1810]

Check out clunkers and classics on you tube he's doing a 69 nomad

[@gregdiamond6023]

@@wilenelson1810 Mortske just did a 68 nomad Chevelle.

[@daviduglem3213]

If it wasn't for Duff you'd never get anything figured out mortske. Best will it run on the internet for sure. Thanks again, Dave.

[@MortskeRepair]

Our pleasure David

[@garysprandel1817]

On the mice getting into the transmission or other seemingly impossible locations. You'd be surprised where mice can get to. Was working for an HVAC contractor in the mid 80s and up in the office when the boss's wife started screaming and freaking out,bunch of us rush to check what's going on and she's saying a mouse just poked it's head out of the disc drive. this is of course the days of the 5.5 floppy with maybe a 1/4 inch high slot with a slightly larger opening at the center with a knob/ toggle to lock and engage the drive so we're a bit skeptical about a mouse getting in such a tiny opening. since the mouse popped back in to the drive boss's wife turned the toggle down to block the drive port so we cleared her out,closed the door and with one other worker at the ready with a few implements to dispatch the mouse if it was actually there I turned the toggle to the open position and sure as crap this little brown mouse sticks it's head out of the center of the drive port and bolts. so yes if there's even the slightest, seemingly impossible opening a mouse can get in it.

[@jinglingbabygarage7030]

Found rat turds on top of the pistons in a Big block with no intake on it!

[@davidanderson2393]

It's a real bonus when the torque converter inspection cover is self cleaning, she's a beauty eh!!!. It would make a good bird hunting rig with those dirt diggers, not enough low end power to get it stuck, good snow unit.

[@johnelliott7375]

God bless you all and thanks for sharing this with me and my family! Great day to you tomorrow!

[@differentgroove1]

Before doing the donut you told Duff to hang on and as told Duff braced himself . To see that is priceless. hands down !

[@MortskeRepair]

He's conditioned

[@differentgroove1]

@@MortskeRepair LOL ! Sweet !!

[@htownblue11]

Mortske, your humor mixed with the clips always has me laughing. Humor makes these projects fun regardless of how hard they are.

[@MortskeRepair]

Glad you enjoyed it!

[@mighty300il6]

Still amazed that it basically fired right up after sitting that long. The plastic thingy in the glove box is a rain bonnet/cap for the little woman so her hair won't get ruined. My grandma always wore them. Also is that a 60s something Malibu???? Great video as always.

[@MortskeRepair]

Some just want to live!

[@michaelrichter1465]

The "sleeve" for insurance papers looks like a Alka Seltzer tube from back in da day. I want that shortbread recipe for sure. Gotta be a bangin recipe I just know it.😀

[@nodaklojack]

Thx for putting put another good video. Enjoyable.

[@stanleymartin1613]

That would be a great ride for someone to get back on the road 😀. 40 years ago I had a 1970 Ford Country Squire, wood grain and all. It had 2v 429 c6. Real cool dash, really rusty body but the frame was good. Bought it for $75 . Wish I still had it 😪.

[@lbindert]

Ain't that always the way. The best and most fun cars were the el cheapo's. Mine was a junk yard rescue in 1970 but a 51 ford 2 door for $150

[@PapiDoesIt]

For me it was a Earl Scheib painted green 1970 Malibu. The original 6 banger was blown up and the previous owner had tossed a Buick 350 in its place. I paid a whopping $375 for it in 1984 and even took my future wife on dates in it. The trunk floor was about 70% unrusted. Great memories in that car.

[@jeffrykopis5468]

Ford was sure stingy with their 4 barrels! A 429 2V! Like asking Ali to breathe thru a straw during a fight! But I've had about 5 460s, and they all had 4 bls at least.

[@stanleymartin1613]

@@jeffrykopis5468 Hell i was only 18 back then, still could brag about the 429cid

[@mrromantimothy]

@@stanleymartin1613 around 2000 I bought a Ford gran Torino sight unseen for a hundred bucks, I worked on it a few days after work got it running. a lady came out and took the plates off it,( I bought the car off her husband,) ,so I drove it home anyway and then they come back and say they wanted the car and tried to give me my money back! I said hell no, I don't work on other people's cars, and you told me the motor was blown. it was a Gran Torino sport had factory gauges in it with the four barrel 429 a cherry body rust free California car , the same year as a factory starsky and hutch car, the only one I had ever seen the only other ones I've ever saw had the 351 and we're just a plain Gran Torinos, I put it in my wife's name ,slash soon to be ex-wife you know how that story goes...

[@jamespn]

It’ll make a great power tour candidate. Looks like a rural mail carrier car with the excess wear on the passenger side of the front seat.

[@77yogurt]

Now THAT makes total sense!! 🤙👍🏻

[@patfreiermuth918]

Late 60s early 70s 307s we're known for flat cam's and lifter's. Did dozens, good luck!!!!

[@orange72mc71]

Never saw a front bench seat that the driver's side was mint and the passenger side was wasted. When I was a kid I thought wagons were dorky. Now I'm old and I think they're Cool. Right up there with customized 70s van's. Nice job Mortske 👍

[@MortskeRepair]

Thanks for watching

[@orange72mc71]

@@MortskeRepair There is a person out there pretending to be you. Tried to scam me into thinking you were giving away a Lexus es 350. I have the info if you want it. Knew it was fake pretty quick but I played a long for a while

[@MortskeRepair]

@@orange72mc71 Yeah, not much I can do about that unfortunately.

[@bradsmn]

Duff sure is lucky that you continue to find some great cars and trucks to keep him entertained and interested.

[@rsprockets7846]

DUUUUUUUUUUUUUUUUUUUUUUFFFFFFFFFFYYYYYYYYYYY

[@MortskeRepair]

He finds most of them

[@virtuestreams2616]

Excellent episode! When I was a youngster during the ‘70s, these cars were a common sight. It’s a runner folks-for certain, someone with a bit of welding and body skills should snag this for a project as it be fairly inexpensive to restore to a grocery git’r or a fishing rig (nothing fancy). Thanks for editing and such as it is truly appreciated. Cheers to Duff! 👏🏻❤️🔧

[@johnelliott7375]

Duff is keeping you safe from the wildlife and farm critters that could be a issue and getting some exercise while doing it. He is certainly very happy and thankful for you taking him along.

[@MortskeRepair]

He lives for those trips!

[@Higgwigg2882]

The passenger side door has been “tommy boy’ed”! I was awaiting the clip!.. haha.

[@kesterhively8773]

Clunkers and classics guy would be interested in the he's building a nice nomad it would be a great parts car for him

[@philben_454]

He said he’s not interested in a $2000 parts car 😂 Ol Mort should throw a LS in his then they could race

[@richardmarino5658]

You might want to get in touch with Clunkers and Classics . He has one he's been working on for some time now. He's always looking for one for parts.

[@MrMurraypants]

Yup, I just emailed Clunkers and classics. Told him about the emblems he looking for. Of all the luck.

[@clunkersandclassics]

I just need an emblem, not the whole car.

[@MortskeRepair]

You need the entire car!

[@kimberlywilliams9757]

😅🤣😂 By the Power of Gray skull! ⚡ This was a very entertaining video. I really enjoyed it! 😁👍

[@MortskeRepair]

Glad you enjoyed

[@marcosathens8140]

I have done the same, Clean & keep what you have to get it started. Change/update what you want when you plan on keeping it.

[@bigbuck1318]

Clunkers and Classics is currently restoring one of those 68 Nomad Wagons.

[@Gordonseries385]

Had a FL1A bulge open from the seal. Took the new oil pump apart and found out a burr stuck closed the pressure relief valve. And yes all the oil went on the floor....... sorry Greta Oh I remember the oil gauge ping over 100 lbs. This was in the winter and cold.

[@MortskeRepair]

Whoopsie!

[@letterpress_outlier]

Good one Mortske! Love the dead pan delivery

[@MortskeRepair]

Thanks for watching

[@grassy-qb6qc]

3X are you loosing weight haha I'm definitely stealing that one. My uncle had a 68 or 9 Pontiac station wagon that thang was a beast they would go camping in the back of it at least once a month. That was good times for us kids eating hamburgers off the grill drinking glass bottle Pepsi's running around the woods.

[@dandunlap8638]

That would make a cool crew cab El Camino

[@kimberlywilliams9757]

I have definitely jumped a few set of railroad tracks in several different vehicles. My '77 Firebird TransAm was the car that did the best at ramping the tracks 😅 If you jump them in a pick'em up truck it's best to remove the spare from the back of the bed first! 😂

[@MortskeRepair]

Smokey and the bandit!

[@combatkarl965]

I did it with a '73 3/4 ton GMC Suburban. Talk about scary. I thought the body was going to come off the frame. The thing was loaded with Illinois cancer.

[@kimberlywilliams9757]

@@combatkarl965 Yikes! 😳

[@MortskeRepair]

@@combatkarl965 good stuff!

[@jasonpeters9390]

Brilliant got something worth watching tonight now sit back watch and learn

[@wolfc7280]

There was a period of time late 50's to the early 70's that we'll never see again. In my opinion it was the best tome period for cars.

[@MortskeRepair]

AGreed

[@FreedomRock44]

Introduced in 1968, the 307 was a typically muscle-car-era response to squeezing more power out of a small displacement engine. Essentially a 283 block with the crankshaft and rods from a 327, the 307 served duty as Chevrolet's smallest small-block V8 until it was replaced by the 305 in 1973. Power When it was introduced in 1968 the 307 was rated at 200 horsepower at 4,600 rpm and 300 foot pounds of torque at 2,400. However, the federal government's emissions regulations of 1972 saw the 307 de-rated to 115 horsepower. While a certain amount of this was due to testing standard changes from "gross" (just the engine with no exhaust system) ratings to "net" ratings (power measured with exhaust system, intake system, alternator and all accessories), post-1972 engines were still down about 60 horsepower when compared to earlier years. Chevrolet never produced a high-performance 307, but it did offer a marine version of this engine rated at 245 gross horsepower. Lower Engine The 307 used a 283 block with casting numbers 3914635, 3932371, 3932373, 3956632 and 3970020. The block used 3.875-inch cylinder bores, 5.7-inch rods and a 327 crankshaft with 3.25-inch arms (casting numbers 39110011 and 31110001). The 307 crankshaft used the same main and rod journal diameters as the 1968 327 -- 2.45 inches and 2.10 inches, respectively. Compression varied between 8.2:1 for emissions-era motors, to 9:1 for earlier engines and upward of 10:1 for marine engines. Cylinder Heads The 307 used one of three cylinder heads -- casting numbers 3927185, 3986338 and 3998991. Casting numbers 3927185 an 3986338 are early low-rpm torque makers with 70-cc combustion chambers, 1.72-inch intake and 1.5-inch exhaust valves. Chevrolet used the 3998991 from 1970 to 1976, and it was identical to the other heads except for its larger 74.56-cc combustion chamber. Manifolds The 307 used one of three cylinder heads -- casting numbers 3927185, 3986338 and 3998991. Casting numbers 3927185 an 3986338 are early low-rpm torque makers with 70-cc combustion chambers, 1.72-inch intake and 1.5-inch exhaust valves. Chevrolet used the 3998991 from 1970 to 1976, and it was identical to the other heads except for its larger 74.56-cc combustion chamber.

[@peteloomis8456]

Every person I knew that had the 307 was junk and smoked and leaked oil like a sive but would still run but not very strong . On the other hand I had a 283 that I built that would rev to 7,000 all day long in a 71 GMC 3/4 ton with a th350 trans with 32 inch tires on the back that if I neutral dropped it at 6,000 it would do funny car style burnouts lol . I raced a buddy of mine that had a 69 Plymouth fury with a 440 in it and he could only pull by me by a1/2 a car up to a 100 or so which isn't bad considering the truck is heavy but has the aero dynamics of a brick lol . I beat that engine for years and never had a issue with it and sold the truck to a guy I knew who drove it for years and I used the money to buy a 70 El Camino with a 350 4 barrel with headers and a 4spd with 3:73 positraction and it got up and hauled the mail . Fun times back then for sure .

[@neal6418]

Let's not forget the 262 👍

[@NoWr2Run]

@@neal6418 Had a Monza with a 262 in it, ran pretty strong for that small car. It was a bitch to change spark plugs in though.

[@rickbaker7507]

the 305 wasn't introduced until the 1976 model year, the 307 was discontinued after the 1973 model year, in 74 you could only get the 250 inline 6, and the 350. 75 brought the 262, for 1975 only.

[@stephensaasen8589]

I always heard the 307 was considered a dog but in my book if you can get the compression ratio 9.75 : 1 or above and give it the right cam, it should really rock.

[@462ANIMAL]

The wing on the back roof , helped keep exhaust fumes from coming in..with the window down..depending where your exhaust pipes were.

[@dietersmythe9649]

Helped to keep the back window cleaner as well.

[@462ANIMAL]

@@dietersmythe9649 yes.. it keeps snow from accumulating.

[@offensive164]

That crankshaft is the same stroke as a 327, 350 block, 307 crank and 327 pistons whammy

[@SCREECHTRUMPET1]

The 307 was better motor than the 305 that replaced it. Since it had a larger bore than the 305, small chamber (64cc) cylinder heads from a 350 with 1.94" intake valves could be used. It made the motor produce good power above 5,000 RPM.

[@born2soon]

The rear wing was meant to keep exhaust fumes out of the back end when the window was open. Richard Nixon came up with the locking gas cap. Turn down your thermostats, no exterior Christmas lights, lock up your gas tanks...

[@MortskeRepair]

And for racing downforce!

[@corvettejohn4507]

You misspelled Jimmy Carter.

[@born2soon]

@@corvettejohn4507 You're right, it was Jimmy Carter. Sorry.

[@richmill6043]

Welcome back to Mondays Duff Dog and Morstke!

[@erikalbertson7483]

Yeah, I jumped my '74 Vega coupe over some railroad tracks. It bottomed out 3 times, and the radiator came loose and got shredded by the fan. So, I coat-hangered a Vega wagon radiator in it, and put new shocks on the front. Mint ! Love the wagon !

[@MortskeRepair]

Oh wow!

[@amadeo_serrano]

It's possible that "true dual exhaust" refers to cars that didn't have the H-pipe coming down from the manifolds that was common in the earlier cars. The Fram filter is probably totally at fault. I made the mistake of using a Fram filter on one car I had and. lo and behold, one night coming home from work, I found a trail of oil leading to my car. Fram strikes again! "You can pay me now AND pay me later" should be their motto. 😱😤🤬🤬🤬

[@bryanyoung2963]

Mr. Mortske: after you pressure washed that thing I can almost hear Pudding singing his praises with visions in his head of you doing his dance 🤩.

[@MortskeRepair]

Ugh, I thought I heard something.

[@craigbowley6783]

I love station wagons that's one of my dream wagons.

[@ae86hachi]

A better question would be "should it run?" Looks a bit to far gone in my opinion.

[@tomstarcevich1147]

Definitely not worth the money😳

[@michaelmount76]

Monday Monday Monday thanks for the video bud

[@tonyfriend7413]

8/18/22. that was a really nice wagon once upon a time! would'a been proud to have her.

[@chicagovasko]

I can bet your sweet peach basket Mortske gets shocked the automatic thumbs up appears. 👍

[@MortskeRepair]

haha

[@WetPickle1]

I stil need, no the people need a Mortske, Puddin and Duff collaboration!!!

[@gsmith6255]

I can’t believe it started right up and you were able to drive it. You really know old cars and engines!

[@MortskeRepair]

We just get lucky

[@garymccord4277]

You and Duff sure find some neat old cars, That station wagon would be a blast to finish it off as a RAT ROD it is almost there already just need a window and straight pipe out the rear and drive on.

[@urbanurchin5930]

I was kind of thinking along the same lines.....but, instead of trying to find a replacement window (which may be almost impossible) why not weld in a steel panel and make one side of the wagon a "faux" sedan delivery ?? The new owner is going to have to do major work to that quarter panel anyway - and address the fuel tank.

[@Matt-ov6cq]

Mortske Mondays are quite litterally the best day of the week. Thanks for another one! Keep it up!

[@MortskeRepair]

Much appreciated Matt!

[@TMEBNDT]

This is my favorite channel on youtube to watch. Please don't ever change the content.

[@MortskeRepair]

Much appreciated for the kind words.

[@brettmorter3058]

I think I've jumped every railroad track near my house and a gnarly dip at wayyy too fast haha

[@dillonmiller956]

My Pawpaw always had a quart of Top Artic in the toolbox of his pickup. Brings back good memories.

[@MortskeRepair]

Good stuff!

[@marksaunders2500]

Hi from uk TM & DD 👋 👍 🐾🐾 another awesome save from that field of dreams and vhrome held up well on her too 👌 every time I see that clip of you double wammying yourself with lightning I laugh so hard man am sure Derek of vice grip garage loves a good zapping to its the guaranteed yes or no I guess 🤣🤣 but great one and also that start of burnout ("" that little bit of one"") when I seen rear tyres am surprised when you dropped in with revs on it didn't move shop back few foot 🤣🤣🤣 thanks for your time be safe and see you soon 👍 👋 🐾🐾

[@mattstoll9162]

Finally had a chance to watch this...the Tonawanda Engine Plant is 2 minutes from where I live. My father worked there in the 70's and actually quit in '77. Just a little useless info for you Mortske, lol. Enjoy all the channels!

[@MortskeRepair]

Thanks for sharing

[@SpartanX360]

Morsky loves riding the lightning sparkolaters, if the world ends we might have to revive the good ol V8! V8! V8!

[@takuacheperformance4740]

Your page always brings me much joy!! Love on Duffers for us please!

[@MortskeRepair]

So glad!

[@waltergrimes1930]

Tell the guy that was doing live thanks for the tip love the wagons

[@MortskeRepair]

Will do

[@johndewey6829]

the 307 was one of the best engines I ever owned. it was in a 68 Impala, then a 67 chevell SS, & then a 67 El Camino

[@rottoratrodrusttohotrodaka3550]

Had a 68 Chevelle wagon also and it was a blast to Hot Rod around town. Heavy car for a powerglide, but alot of fun.

[@jrose-xp6tf]

Cool, as a '70's kid I rode in a lot of wagons and somehow they grew on me.

[@Oyvind88]

Awsome wagon and video, the style off it😎👌 Monday is saved,score👏

[@jessenelson9676]

Another good one. One thing that cracks me up is seeing some of those roads. They just go straight for what looks like forever!

[@MortskeRepair]

Flat and straight!

[@davidarnette327]

Mortske Monday good start to the week. Since you only got shocked once and it ran so good....it's trying to tell you something....please go back and get the Oliver!

[@MortskeRepair]

No tractors!

[@nancykitzinger3078]

Listening to you talk about jumping railroad tracks, makes me want to watch your RV video again!😂 What a gem you found! Someone is going to get a good one! Good job!

[@MortskeRepair]

Thanks again!

[@waynekopinski1949]

Come on Mortske, M&S on tires means Mud and snow.😂👍

[@MortskeRepair]

my bad

[@jongercama1842]

Great to see a 68-72 A-body Wagon getting some love. You don't see many at all getting around in Australia. Well except for the '72 Lemans T-41 sitting outside my garage right now. Keep up the great content!

[@MortskeRepair]

Thanks for watching!

[@williambinns1631]

A guy I knew in highschool back in the 80's had a 2 door Chevelle wagon with a 396 and a Powerglide. Almost 40 years later and I have never seen another 2 door Chevelle wagon.

[@MortskeRepair]

That would be awesome!

[@mrromantimothy]

KZbin has your back for sure I would have watched that go cart video normally I watch all your videos but I kept looking to see how many times it was up next in my feed I believe I counted seven times but they sure wanted me to watch that video.

[@MortskeRepair]

Nice!

[@JimmyCandFriends]

A friend had a 95 Dakota never changed the filter after factor service finished. That is until he left a trail of oil across a customers driveway from the filter rusting out. It wasnt easy getting the old 1 out ether.

[@MortskeRepair]

Yuck

[@jeaniepatterson2384]

That bobcat looks like a ton of fun! Handy too!

[@MortskeRepair]

Sure is!

[@johnelliott7375]

Need more Duff cam! Great evening to you all!

[@beardedscrapper538]

1955 nomad dream car. Ever since home improvement.

[@MortskeRepair]

that's a classic!

[@lovetocrank]

Glad it’s running for you, but I did enjoy listening to that starter when you were cranking!!

[@raymari7658]

I had a '68 2 door straight 6. Add on air. Was my Mom's. Sold it to me when she bought new. One dollar. Loved that car. Great gas mileage and enough power to cruise the turnpike. The air was freezing cold. Would love another with the 6 in it.

[@MortskeRepair]

Awesome

[@richardflower5993]

What action packed video burnouts and car shock all in one. Yes time for a cold snack. Hi duff 🐶

[@terryeustice5399]

You got it going with little and really not a whole lot invested. It is rough. If you want to see one that’s being done. Clunkers and Classics is rebuilding one from the ground up. Thank you Mortske! Thank you for sharing.

[@MortskeRepair]

Thanks for watching

[@stevew270]

I've never changed the bearings in a GM alternator but I have replaced the brushes and internal regulator in a couple and also used to change the brushes in starters and spin the contact disc in the solenoid if it had a bad spot burned in it.

[@davida.p.9911]

My cousin had a 307 in his 1970 Chevelle. It was respectable, with the ol 2 BBL. Probably the same engine that's in the Nomad. Not much difference I would think between 1968 and 70. It was fun and fast. Good work gettin her going again Mort! And Supervisor Duff! 🐕

[@brunocampigotto8739]

Hi Mortske Bruno here, glad to see more great material and you and Duff came thru again on the Nomad. Hope for more soon, keep up your great work. Love Ya.

[@MortskeRepair]

Thanks, will do!

[@stephensaasen8589]

My dad always told me the 307 was a dog. Derek on Vice Grip Garage did an overhaul on a '69 Chevelle 307 and just gave it the right cam and then put it on the dyno. Don't remember the results but it was really good. I think it put out more than 300hp. And like I said, I don't think he did much except give it the right cam. The way I see it, the 307 had pretty much the bore of a 283 and the 3.25 stroke of the 327. So if you cam it right and get that compression ratio around 9.75 or more, it should rock.

[@darricksullivan1986]

My first video for about 7 months I'm sorry I haven't been watching I fell into a deep depression and it messed me up pretty bad 😞 I'm glad to see your still making videos and thank you for another great video I'm glad I'm still alive to watch

[@MortskeRepair]

Glad to see you're pullin through!

[@darricksullivan1986]

@@MortskeRepair thank you so much

[@CorollaMAD97]

Hey mortske I'm watching alot of your videos trying to catch up loving them so far , your a funny guy keep up the good work

[@MortskeRepair]

Much appreciated for the kind words!

[@JohnSmith-is8nq]

I speed-jumped over railroad tracks once and that moment is fondly burned in my memory forever. It was a 1988 Nissan Sentra. That car was great.

[@MortskeRepair]

Good times

[@johnelliott7375]

Great shop you have now and we are happy to see you in it and working. Great day to you today and good morning when you get up.

[@MortskeRepair]

Thanks 👍

[@shaynechild2517]

MORTSKE MUST READ!!!! Ok i just had a major Tiffany!!! Make this car into a 4 door El Camino!!!! I think that would be a cool project! And i dont think anyones done that yet.. My family had a white 71 or 71 Buick staion wagon and i remember back then when i was 10 years old dreaming of turning our station wagon into a El camino.. And a 4 door car you would have room for all these activities! So many activities!!! Just a thought ..and love your videos! And i would come wash parts for you any time !!!!

[@cliffordplasd8239]

I tell you nothing is Sexier than the Chevell and torino GT wagons can't wait to see what you do with this one

[@cjplol6589]

Watching you ride the lightning, is a high light of my day

[@MortskeRepair]

Glad you enjoyed it!

[@rickysoffroadrecovery]

Absolutely adore that Chevy station wagon... We called it the shaggin wagon...we had good times in that station wagon...😍

[@luckent47]

Long wheel base helps squat it when you dump it. Reinforce what's left of the frame and 454 it. No shine war wagon

[@jayceec3539]

Our family came up with the name for the last car. Sweet,sir swazy!!