RARE! 1962 Chevrolet CREW CAB factory conversion field find! And 1/2 ton suspension swap!

I had seen this 1962 Chevy crew cab from a distance but always heard it wasn't for sale. A subscriber got me in touch with the owner and I was able to strike up a deal to get it out of the pasture where it had been rotting into the ground for over 30 years. Although it is very rough it is a factory upfitter crew cab conversion that was done shortly after it was assembled by GM and then likely sold to the United States Air Force after being completed. Since there was no drivetrain and the suspension was very rough I decided to convert it to squarebody GM 1/2 suspension for several reasons. As much as I wanted to take this pickup further, it has been SOLD to a new home! As always, thanks much for watching!
Check out our new and improved Mortske merch site!!
mortske-repair...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Depstech bore scope: amzn.to/2Txx4Fa
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#crewcab #c10 #mortskerepair #patina #puddinsfabshop #62chevy #shortbed #stepside #shortbox #4door #loweredtrucks #suspension conversion #MortskeRepair #willitrun #overdrive #v8 #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #badgas #nobrakes #12volt #hackmechanic #stuckengine #blownengine #forsale

[@PuddinsFabShop]

Crew cab! Enough room for duff to pick up some Honeys to cruise with him! If y’all like watching Mortske be sure to tune in to my channel tonight at 6pm! We did a collaboration with a Minneapolis Moline G1000 wheatland!

[@tjakr3869]

I can't wait. Monday's are now my favorite day!

[@netrioter]

A Minn Mo in Oklahoma. That's crazy. Someone brought that down from up north.

[@johnswick4593]

Puddin and Duff. Sounds like it could be better than "Beavus and Butthead"

[@chrisc1553]

Yeah I thought yall were gonna do dueling datsuns

[@johnswick4593]

@@chrisc1553 Mortske would win because of the extra weight in the front seat. TRACTION BABY!!

[@jonathanfleming9213]

This is a hidden gem of a youtube channel. I've watched vice grip, thunderhead, junkyard digs, cleetus, whistlin, puddin, roadkill and everyone else from the beginning. And this is one of those channels. Guaranteed.

[@MortskeRepair]

Much appreciated Jonathan!

[@acardiac5983]

A guy knows another guy that’s revives junked out vehicles. 😉

[@daltonthecarguy6435]

Absolutely! Instant subscribe lol

[@Name-vu1kn]

Watch halfass customs

[@wubber2chc]

Completely agree. I watch & subscribe to everyone mentioned!

[@Foontflaky]

Morts got the Best can-do attitude on the interwebs. It`s going to be great....

[@jeromebreeding3302]

Mortke, that was a very ambitious project,and a ton of work. The engine looked promising at first blush, a shame it shit the bed I hope the new owner rewards you for all the mods you did.

[@MortskeRepair]

Thanks for the kind words!

[@Bill-xc8le]

Good to see you’re back to working on good old American junk!!

[@WatchWesWork]

I can't decide if it's better or worse now, or if that even matters...

[@heavyearly2232]

A full tilt resto would be pretty expensive...the patina on this is pretty good.

[@Bill-xc8le]

Agree!

[@MortskeRepair]

Oh come on Wes!! At least it rolls now!

[@kingplumber]

What's the drill bits and the reamers brands ?

[@johnbrunson1087]

@@kingplumber Norseman, I had to go back and rewatch to catch it.

[@georgemannsr8708]

How about using the Suburban frame under the 62 cab ? Whoops too late !

[@johnm.5848]

Good find Mort. Whoever the subscriber was that put you in touch with the previous owner is cool in my book. I recall the USAF has a base near a city in your state called Minot where B-52s are based out of so that's where the truck could have been earlier in it's life.

[@MortskeRepair]

Grand Forks has one too I believe.

[@Johnshaft1970]

@@MortskeRepair That's A Gorgeous Truck, Stepside Crew Cab Are Rare. All Of My Trucks Are Flareside Too !!!!

[@duckscustomgarage9239]

YW is a 1966 327/185 from a C60, M60 or S60 truck. Your block was cast on January 27th, 1966 and the engine was assembled on January 29th at the Flint, Michigan

[@MortskeRepair]

Yup!

[@ItsjustChris95]

I love watching Duff having fun with his friends.

[@boblamb8421]

Especially when Mortske has it on fast forward.

[@kevincostello3856]

73 IH travell-all green. International Harvester . V8 345ci thru 392ci. All types diff mills for that I think? Uncle Bob used his to tow his gar wood boats with his IH. Great channel thank you

[@MortskeRepair]

Thanks for watching Kevin!

[@bigbear5585]

Another good show there Mortske and Duffinator! I think the moral to this video would have to be think twice, measure twice and don't get your holes mixed up LOL. No offense Greta. I can't decide if that truck would be better with old Betty blue or Greta green either way it's a cool project. If I were doing it though I would have probably put it up on about 6 in lift kit with 44-in gumbo mudders and a fire breathing big block under the hood. One last note. I think the Duffmeister deserves a treat sponsor. I would do it myself but I'm so broke I can't pay attention LOL. I don't know if you're going to name that one Mortske but the Motley Crew Cab would be what I would name it. Can't wait to see the showdown between you and Puddin! I'm sure we're all going to laugh our butts off ! Damn it's hard to keep what you say PG-13 isn't it Mortske? 👍🐻🇺🇸🇨🇱

[@jayceec3539]

We look at it& amagine what it would like fully restored!!

[@stevedeacon1213]

I love this pick-up, my favourite vehicle yet! I hope whoever buys her does her up right, bring back the green paint too, it'll look epic and make a video series of it, doing her up and putting her back together, I will definitely watch every one! Shame it's not for you and Duff, but keep the epic content coming!

[@stealthexpressvan8475]

The crew cab reminds me of a Bell Telephone linemen's truck.

[@lorrie7938]

What if ya throw that 6 liter ls in the ole cowboy limo , thats a very unique 62. I can see a lot of customization potential.

[@DreamHachi]

The Forestry service here used to convert those trucks to 4 doors back in the day. Seen a handful of them in my life, from what I recall a couple companies did the conversions on these. This would be really cool to get restored. Needs a lot of love

[@MortskeRepair]

Yeah, I presume a conversion company did this one for the Air Force.

[@astravanmk2]

Thank the lord for Mortske and Duff for cheering up a Monday.

[@astravanmk2]

@Chaterine 😽 think you are spamming on the wrong channel here love. You keep a knockin but you can’t come in.

[@rexfreelom4300]

When you install the 1983 Chevy cross-member square body. Then you did put in the lower mounts. The mount was too high over the longitude chassis rail of the 1962 Chevy crew-cab truck. Here - some suggestion is to add in the bar as a spacer between the mount and the chassis. Then drill two holes thru the bar spacer. Then heavy duty rail spacer will be tighten with two bolts and two nuts plus extra bolts and hex nuts on other side where the mount (car engine cradle) is. You did super job and on film.

[@MortskeRepair]

That’s exactly how I do them

[@victorgoins6131]

It would be cool to see you finish it. Just stick a working engine in it and finish it up.

[@sulistiman]

Boy oh boy that’s the most help you’ve had in a while cool good job

[@josephpilosky4775]

Like what you did with regular tools and alot of work ! Just goes to show you don't need hi Tec tools. Hi duff dog stay safe and healthy 😀🍩🍪

[@MortskeRepair]

Thanks Joseph!

[@tomcarlson3913]

As a newer Burban owner (Heh, newer! Mine's 2 months from qualifying for Wi collector plates) if that square body were a little less ruined I'd feel bad seeing it chopped up.

[@fredandersen9873]

Same here. I HATE seeing any square body parted out, but that one was a mess.

[@terryeustice5399]

Well I must admit Ian impressed with your fabrication. Not sure what’s going to happen with this project. But will be interesting. Thank you Mortske !

[@MortskeRepair]

Thanks for watching Terry!

[@InnovativePoolsLLC]

This is going to be a ton of work can’t wait to see the progress and you get this rolling on the road again! That trucks pretty cool way before my time , question is can she do donuts?

[@rsprockets7846]

he should swap in a complete LS 1 carbed with a flareside bed...this on deserves a faux paint jib

[@kerrywootton2435]

You probably already know this but Coors Light and Keystone Light are the same beer...That is according to the Coors Beer Truck Guy in my neighborhood.

[@MortskeRepair]

Yup!

[@msnapp169]

Man you keep doing these morning uploads I'm not going to have a job anymore cuz I'm going to keep being late LMFAO

[@haroldrogers6083]

Boy you ain't kidding about those springs being ruffer than old Wendy Mattress back , that sucker would have no give !! But Puddin may need some for that blur mini truck hauler he has ! Lol

[@joethepirate1]

I’ve been a fan of yours for a few months now but today you’re officially my hero. Pizza oven in the shop! 🔥🍕

[@MortskeRepair]

Heck yeah!

[@stucook8622]

Thanks for the Mortske Monday 🐾 I remember seeing that rig in a previous video. Ive never seen a rig like that in that year. Good luck and thank Chin for the editing work. Take it easy.🐾🍺

[@MortskeRepair]

Thanks for watching Stu!

[@backyardmechanicrestoratio6958]

Mortske you have so many cars and possible projects that it’s a sin not to do some builds you could do some budget builds some higher dollar builds and some in between and just have an amazing fleet of beauty’s you can go out and turn the keys and drive anywhere you want to

[@MortskeRepair]

Not enough time or miney

[@hensleyshobbies-doug7761]

Damn Mortske, shame about that 3-2-7, oh well can’t win em’ all I don’t reckon. But I’m sure you’ll do something about a engine for the old refurbished crew cab Chevy and can’t wait to see the finished project bud! Keep on keeping on and keep on rocking 🤘

[@fixxerautomotive4917]

Yay! You found a home for that 5.3 you have sitting in the corner of your shop!!! :D

[@MortskeRepair]

6.0!!!

[@djfurman100]

I'm so freaking happy mortske I been waiting for this video I love to Crew Cab trucks I want to own one day

[@marksbikeexports5123]

All you need is $6000usd and this 'gem' could be yours.....................

[@djfurman100]

@@marksbikeexports5123yeah true but who has that kind of cash lying around

[@marksbikeexports5123]

@@djfurman100 .........at a guess, the ones of us that don't piss away 6k on shit like this.

[@timjones1464]

This crew cab has seen better days but man what a cool truck!!!

[@CoastalAutoReactionCAR]

Been waiting for this! Should be a gooder!

[@MortskeRepair]

NOt bad for some field junk!

[@frankloree2462]

Air Force crew cab probably from a SAC BASE . See them once and a while in old Air Force documentaries

[@offshore50]

Oh yeah! Monday morning goodness

[@ralphjonesog7149]

Great video thank you mortske and duff 👍🏻

[@mountainmangarage7572]

Another great video man! I'd put an old massey ferguson engine in there and and an old granny low 4 speed lol

[@MortskeRepair]

Oh boy

[@CoastalAutoReactionCAR]

That travel-all is wicked!

[@MortskeRepair]

too bad about the whammy!

[@CoastalAutoReactionCAR]

@@MortskeRepair Agreed!

[@backyardbowties]

You could also use c20/c30 squarebody engine towers. They are shorter and almost mount up perfectly. It's what I used on my 68. Works like a charms. Keep up the good content

[@MortskeRepair]

67 on up trucks have taller frames

[@AnglinTexas]

That’s what I used in my 63 C10.

[@chrismoody6920]

your video make me forget that im sick with the cold

[@MortskeRepair]

Hope you're feeling better!

[@perotekku]

Been waiting for this one!

[@rsprockets7846]

Swap in the pb. Cylinder

[@jamescaldwell2095]

I get it the swap, but I actually liked the 8 lugs. Just looked like a big, tough old rig.

[@MrJonathandcrow]

The Use To Put Those Railroad Tires On Them Crew Cabs. Hey Duff

[@suzuki230]

Hyrail, and they suck. They’re not fun.

[@Herpsnhotrods]

Starting my vacation off right with a new mortske video! Nice

[@MortskeRepair]

Enjoy!

[@mark-wn5ek]

Uhhh (beevis voice)....fatgirls and mopeds...hehe...my favorite! Best part on the 62 was the gangsta wall tire....those old conversions look like they were produced by Fraanken-stein Industries.

[@THRASHMETALFUNRIFFS]

B&B short clips are going huge now because they're apparently making new episodes with Mike Judge based on new trends or somehting!

[@DanDan-yy8sf]

"That's a wrap, was quite the crack, $ six thousand out the door, and never look'en back ! I was cursing out those shock mounts on your behalf while the bumper music was playing,,, had you covered man ! Great channel, thumbs up !

[@MortskeRepair]

Thanks Dan!

[@danielnowicki917]

Cool truck. That stacked headlight core support and bumperettes will look awesome on the short bed. I bought a shirt today. I'll send some light Hamm's sandwiches if I ever see em! On Sunday morning hung over. My buddy used to put hot sauce tomato juice and celery salt in a hamms. Poor man's bloody Mary! I for sure thought the Chevy would spin. Gotta watch the colab with you and pudding!

[@MortskeRepair]

Thanks for watching and for your purchase! I like your buddy already!

[@Ryanfantana]

Would have loved to have a 4wd version of this for hunting this weekend… pew pew pew, get some!

[@MortskeRepair]

Me too!

[@rtaylor190]

Believe they made a few of them. For the railroad ive seen one for sale long ago high dollar

[@ThomasSmith-rp6xv]

Awesome job dude! I have a question! I thought you could take the chevy suburban body off of it's frame and take the old truck off of it's frame and do a frame swap? Would that be easier? Maybe more work? If the one ton is 133 inches wheel base? I think the suburban is 129.5 if I remember correctly? Just curious! Have a good one!

[@MortskeRepair]

Then you gotta remake all your body mounts and your wheelbase is off

[@jesterr7133]

Definitely keep that power steering pulley. Those things are surprisingly hard to find in my neck of the woods. I bent one on a '76 C10 trying to be cheap and not rent or buy a puller. It took me three months to find one in another state. This was about 15 years ago, by the way.

[@MortskeRepair]

I've got a whole crate of them!

[@bigsexymuthashutyomouth2546]

LET'S GO BRANDON

[@St0ned_Sl0an]

hell yeah! Trump Train!

[@jackpike9337]

Is this a political channel?

[@mraycgz]

As bad as you think Biden is just think, he beat tRump

[@GRowe1978]

You got that right!! LET'S GO BIDEN!!!!

[@mraycgz]

@@christopherc1976 covid under control for the most part, the economy doing much better, not having a self serving egotistical maniac in charge and the republikkan party looking like fools daily? Yeah. That’s much better actually.

[@jockmchaggis6797]

Aww hell yeah! I'd almost forgotten it was Mortske Monday with all the shenanigans that's been happening! Give Duffers a huge pat from me.. as long as he's not been rolling in deer poop again that is 🤣

[@MortskeRepair]

You know he is!

[@brentking-gmailking2570]

Thanks for sharing Mortske, have a great day.

[@MortskeRepair]

Thanks, you too!

[@jmswyo]

Duff Dog sitting on the front seat watching you- smart puppers!

[@MortskeRepair]

good supervisor!

[@joethanks3745]

The old man used to call 'em Busch burgers!

[@MortskeRepair]

mmmm

[@JoeSmith-lp9ol]

You smoked a square body front clip! Are you nuts!

[@MortskeRepair]

It was junk!

[@WiscoLad]

If that stamp is a YV and not YW then it is a 1968 327 220 HP 4 barrel with a manual transmission.

[@brownwrench]

Your dogs are enthused about anything you drag home it seems.

[@antonioosejo4265]

hey there Mortske, I wanna tell you the best part of about ur videos. Is that you keep that cost way down. Using every tool at ur disposal to acomplish that. I have to say, u did reveal a high school secret on this one. You rode a lot of fat girls and didnt say anything about it, like one name Wendy just like the riding a moped thing. Now I understand why u always say (this is good enough for the girls we go with) what would Gretta think about that one jajajajajaj I enjoy watching ur vids man, keep em coming this was a hell of a project. GOOD JOB

[@MortskeRepair]

Glad you like them Antonio!

[@49BigPoppa]

These truck were made for the railroads for line crews, forestry service and I believe the air force

[@MortskeRepair]

This was an Air Force rig.

[@davida.p.9911]

"Fat girls and mopeds, fun to ride but you don't want your friends to see you doing it"---🤣🤣🤣 Mortske Mondays are the best!

[@MortskeRepair]

Life lessons!

[@northofhwy8180]

Hey. I started that saying. “Duffske”. Love the Frankenstein creepy cab

[@northofhwy8180]

Love your channel

[@stevewheatley243]

I got the same Harbor Freight jack. On sale for 80 bucks,works just fine.👍

[@MortskeRepair]

Lucky!

[@stevewheatley243]

@@MortskeRepair If yours quit,you may wanna check the fluid and re bleed it. Had to with mine and I've used it regularly for appr a yr with no problems.

[@MortskeRepair]

@@stevewheatley243 Mine puked the oil out of the seal. So the seal is shot at a minimum.

[@stevewheatley243]

@@MortskeRepair Bummer bro. You could put new seals in it. Good ones.

[@TheInvisibleGiant6313]

Looked at your merch site. Shame you don't have bigger sizes. Some 3&4x sizes would be awesome.

[@paulfellows2094]

hi mate hope you finish it mortske i love your work

[@rockdinosaur8619]

So wanted to see the Travelall.

[@Deek6923]

Thats what happened to my 350 out of my 94 Silverado, gave its self a vent in the oil pan

[@MortskeRepair]

Whoops!

[@kenfrazier616]

where's your visit to potter county at, saw puddin's funny as heck and enjoyable humor. Pops was a great add in too

[@MortskeRepair]

We're a week behind

[@kenfrazier616]

@@MortskeRepair right on, can't wait for it, it will be a landmark video

[@MickelsonRacingChannel]

That yank ain’t got nuthin on the TBSS Bad Chad yank

[@MortskeRepair]

Bahaha pull off!

[@mikebetts5532]

looking good my friend…. awesome project rig. great work and content… mike in Florida⚒️🔨🔧⚙️👏👏🍻🍻🍻🍻

[@tracymcdougal6381]

Dude,you are freaking hilarious. I enjoy your intriguing videos. And man you sound like and look like my uncle.

[@MortskeRepair]

Glad you enjoy them Tracy!

[@FATMANSAM56]

I need that driver's side back door window from the burb, broke mine jumping train tracks

[@jasonhastings5538]

WWWWWHHHAAAAAATTTTT!!!!!!!! Man thats pretty cool to see!! I like the body style!!!! My favorite!!!!!

[@tyhogue8316]

Mortals! King of rustic relics! Lol

[@MickelsonRacingChannel]

I bought the same jack this year! Hopefully it doesn’t puke too…

[@MortskeRepair]

Good luck!

[@arthurquinn7515]

i like that cutting tool you use

[@MortskeRepair]

Thanks! Works well!

[@tylertieman1678]

First vehicle in awhile you didn’t bust a headlight out on the trip back

[@RoyMarkosGarageRMG]

Best way to end the day- one mortske episode. Sad day on that engine indeed.

[@MortskeRepair]

Thanks Roy!

[@thorburke7030]

This thing was engineered by Ronnie Millsap. Fabrication by stevie wonder. And you of course know who welded her up😎

[@MortskeRepair]

Hahaha!

[@robertkuster6389]

At 50:18 you have a white light enter frame and move left to right and then disappear under the truck.

[@MortskeRepair]

ghosts!

[@dixonrudman2570]

I am in South Africa, there is nothing here to compare to this channel, Duffy is such a good boy hey.

[@rick3090]

back in the day we would find this stuff molested like crazy, my uncle bought a vette in 81 or so , come to find out it was just a wheezy truck engine , stuff still happens to this day.

[@MortskeRepair]

Oh no!

[@nicknackdaddyack]

Heck of a frankentruck!

[@amadocruz8302]

Hola buenas tardes,creo que esta muy deteriorada esta camioneta pero conociendo la aptitud del que lo esta haciendo,esta unidad ya terminada se vera esplendida pienso que el tambien lo esta pensano,y tal vez le haga mejoras para que este flamante como sabe hacerlo siempre,saludos desde veracruz puerto 😃🦈🐙🏖️🌴✌️

[@cynthiaayers7696]

The crude hinge area would be called a "Post."

[@DavidGragg82]

That Burban probably came with a TH350 with a lock up converter. My 80 C10 did.

[@THRASHMETALFUNRIFFS]

HE said it has indicators for 4 speed overdrive which would require the TH700R-4 which is an electronic lock up torque converter transmission... the 350 is only 3 gears at final drive ratio of 1:1

[@sulistiman]

I love your man lift

[@rssvss]

Great work!! TY!

[@MortskeRepair]

Thank you too!

[@jeremyhanna3852]

Are we sure its a factory crew cab it looks like a botched high school project from a 1973

[@MortskeRepair]

It's a conversion company.

[@AndysDogHouse]

Hey @UCsrumG5BYDcT8sQccLCSL4Q. I'm here to support ya again. Lots of tough stuff. Yea Mortske, Cut it up and save your back. Good stuff. Thanks for sharing.🍁👍👍

[@Tee_Spoons_Garage]

I love these old trucks

[@Woody-iv3ud]

The first video and I did an instant sub. I never do that or hardly do it. Great content, let’s just say I will watch a hour or so long video and I like the dog called duff.

[@MortskeRepair]

I appreciate that!

[@appliancerepairshorts]

Man that statement, fat girls and mopeds 😂

[@MortskeRepair]

you got it!

[@DeadReckon]

Am I the only one that likes those big ugly truck mirrors? Probably... At first I thought "Hey that's a solid Suburban" from the angle you towed it out, but that quickly turned to "Oh hell that thing is terrible" Oh hey, my '83 C20 is finally almost street legal too! Only took me as long as it takes ole' Mortske to get 10 of 'em running or more.

[@jesseduke694]

You can't call your white chevy "Casper". As much as I love your channel & what your doin, that name has already been taken. Andy Wood I think his name is? He is freinds with Uncle Tony & dous alot of utube videos with David Vizard. He had alil 71 f100 named Casper. That thing is the real deal! Your not guna want to challenge him for it! That Casper is naaasty!

[@jasonmarks1636]

31:25 " I cant remember" which hole to put it in... uhh oh... lol

[@MortskeRepair]

Hate when that happens!

[@walkersullivan6201]

If your going to go through the trouble of changing the front end you should have just done a 4x4 conversion

[@MortskeRepair]

I'm not a 4WD guy and it's a lot more work to do that.

[@thebear3589]

Finally...a REAL TRUCK....

[@THRASHMETALFUNRIFFS]

he had ;ike 50 Real trucks on here bruh?!!?

[@thebear3589]

@@THRASHMETALFUNRIFFS #51 was da kicka brah.. has anyone seen the asking $ ?

[@THRASHMETALFUNRIFFS]

@@thebear3589 Yeah! n the description he said this here: I hope to continue on with this project but I would entertain selling it in as seen condition. With a clear title in my name I'd like to get $6,000 for this rare pickup. If you're interested send us an email to the address listed below. As always, thanks much for watching!