MOST ASKED WHY MY MOPED WONT START MARK SAVAGE

[@Bigwormox4]

Hiya mark savage. I just needed to thank you again! I used all your videos to repair my Aprilla sr50 and now it back on the road and has loads of life left in it. Couldn’t have done it without your help mate. Bike literally goes over 50mph, 70 jet I thought was very high but seem to run fine 👍

[@marksavage]

Thats great bud and great to hear my videos help and the info helped you do the hard work and got it running All I ask is to share them so others can do the same Take care bud and keep up the good work

[@joshuasalisbury789]

Have u still got the sr50 I have a bike with same engine did u have cold start issues?

[@colinshard8665]

having a dog is like having a toddler around the house lol, especially when she is teething, she is a gorgeous pup by the way

[@marksavage]

Teeth oh yes her teeth lol Everything is in her mouth lol But live her to bits Take care bud

[@olecwow]

sadly my SF2 died a few months ago. couldnt get it started block was considered a total. Got a cheap china made scooter in return (25kph when i got it, now runs 60 ) still missing my SF2 so keep watching your vids, keep doing them! i learned so much :D and i love the dog!

[@marksavage]

Top man and thanks for watching bud

[@Jordan-SJ3]

Hello mate just Wana say thank you I have never fixed a speed fight before nor have I ever fixed anything more than a pushbike but with your videos I have managed to fully strip my speedfight 2 100cc full engin strip down the lot, thank you buddy.

[@marksavage]

Thats so good to hear and really good that my helped you Top man and well done for following them Take care bud All I ask is to share to help others

[@paulbudford]

Nice video. Covering most of the common problems. I just fitted a genuine Dellorto to replace the cheap copy I thought I could save money on. Lesson learned never cheap out on the carbs.

[@marksavage]

yes bud ive bought them , often you have to have the air mix all the way in!! then they run take care bud

[@mikemiles3068]

Great video Mark❗️Thanks for the super videos❗️I’ve got to take my little Yamaha 2018 125cc Zumba up to the State Inspection tomorrow for its annual certification so I am taking a little time to go over everything before I go. Here in Texas we have to have an annual safety inspection before we can register our vehicles, as I have gotten much older I find that I check my little scooter more and more every time I take a ride so I rarely find a problem and this Yamaha has fuel injection, I like that👍 Stay safe and take care of both those little girls you got.✅🛵🎥🤗

[@marksavage]

thanks bud you too and always good to go over the bike, you know what its doing and its all round safer you take care too

[@landmonkey22]

Good video Champ, and doggy got big since i Saw her last.. 😁

[@marksavage]

Thanks bud And she seems to be getting bigger every morning I let her out for a wee lol

[@jannemartensson9578]

Hello Mark .Good work you do to help and understand. I'm a 50+ old man from Sweden 😀 and I bought a 2007 speedfigt 2 50cc AC to commute to work. Now I have a little problem with it not starting when it is cold. It starts with starting spray and then it is no problem can drive as usual and it starts as usual when you drive it type 2 minutes.Tried with an identical original carburetor but the same problem .Tried to check your videos but I am sluggish when it comes to scooter when I was 15 I drove Zundap type 1980 and it could be disassembled and reassembled with the eyes closed. Please help me Mark or if anyone else knows .🤪

[@marksavage]

you carb has an auto choke and the can fail over time , i show this in many of my carb videos and one on them but you can test them and adjust them by turning them in or out but i would just change it as they do not cost a lot and with a good carb clean and a small tune , new plug and clean air filter should go back to starting fine

[@jannemartensson9578]

@@marksavage Thanks for the reply Mark. I have changed the spark plug and cleaned everything and tried another exactly the same carburetor with auto choke and it behaves the same way. But I'm going to check out your video and see if I can get it started but as I said I tried an identical carburetor with auto choke and it behaved the same way. The carburetor is a Gurtner. It starts with start spray and then there are no problems it goes as they should. Regards Janne

[@marksavage]

@@jannemartensson9578 maybe a little tune ? Both auto chokes may not be working! When trying the other carb did you swap main jet over ! As its set up for that jet I've had 5 cards all play the same way then put on another and it went fine !

[@jannemartensson9578]

@@marksavage Ok Mark i Will try this. Il be back 😀

[@joebrown8387]

Your videos brighten my day man !!! Your very funny naturally

[@marksavage]

Thanks bud and for watching Take care bud

[@ChadTheLad]

First of all, cute dog any tips on aligning a woodruff key up to the magneto? I'm having a right pain

[@marksavage]

Hi bud It should just line up and slot on If not you have a problem bud As said I've never had a problem Is it loose ? Did it come out ? As for dog yes bud you know it

[@ChadTheLad]

@@marksavage Its my second key as the first sheared it seems to fit in the crank ok and I cant see any visible damage on anything so?

[@marksavage]

@@ChadTheLad so you had movement As said I've never had this so odd when they play up I'd be fitting a new crank bud

[@ChadTheLad]

@@marksavage yeah I'll just use the bike for spares only paid £60 for a 2000 Peugeot Speedfight 1 50cc lc not bad ay but I suppose this is why lol.

[@marksavage]

@@ChadTheLad yes bud but £60 all in is great for all them parts

[@miningpirate5956]

hi MARK SAVAGE I have a Vivacity sportline from 2005 it will not start unless I inject brake cleaner 2 times then it does and if I leave it for half a day it will not start again and it also holds at full throttle how can I solve angelo from from The Netherlands

[@marksavage]

defo carb bud like in this videos .follow it and you should have a bike that start bud , also thanks for watching bud take care

[@NordicWelding]

Great video, I see that I need to preform service from A to Z on my bike. Again, thanks 🙏 for great tips and way of explaining 👍😉

[@3647Edd]

Like all your other viewers Mark, I'm loving your vids fella. And your dog! Want to swap for an ex-racing greyhound?!!! He eats everything too and he's 4! Full on cleptomaniac where food is concerned! Do have a question for you. Is the starter motor on a SF4 the same as on a SF3? In fact is the basic running gear the same for both models? Bought my lad a SF4 last year and need a starter motor. Do you recommend any particular parts suppliers? Appreciate your time and effort and even though we are coming out of this pandemic take care fella. Remember The Few. Edd The Duck

[@marksavage]

to be fair i've not worked on any sp4 but yes agree most parts look the same as the sp3 but found them much harder to work on having to get all the bolts off just to get to the panels and they suffer from electrical problems and earths along with the clocks etc , best e mail any parts sellers first on e bay and check not from china lol , thanks for watching bud and the you take care too

[@3647Edd]

Hi Mark, appreciate the advice. Have to say I’m surprised how unreliable a 5 year old Speedie with only 6500 miles on the clock is! Fortunately he only needs it until July then it’s hello Honda reliability with an MSX125 Grom!

[@marksavage]

@@3647Edd that's better and yes they do seem to go wrong but were made very cheaply As for the swap errrr lol

[@jimmic.m.7695]

Hi Denmark here. hope you can help, I have a VGA formula 50cc fom 2015 it has been running 2 months ago and now it will not start. the engine runs as it should when I use electric start, it just does not start it has got a new battery, it has a nice spark, it gives petrol to the carburetor, it gives petrol to the spark plug, but does not start. I have separated the carburetor and cleaned with the carburetor cleaner and ultrasonic cleaning and yes all jets are cleaned, assembled it again put the fuel screw 1½ out as it was when I separated it, but it still will not start, I have hit bottom do you have an idea of what to look at?

[@marksavage]

hi bud we now have the E10 fuel which im guessing you have had for a long time this fuel goes off quickly and maybe your problem, i did a video on it maybe give it a watch but try draining all your fuel out and carb then refill with fresh fuel bud but all in it can cause bad damage due to the water however so it turns over you have spark - good blue spark and wet plug wet hand test ? as in my videos have you tried easy start just to see if you can get it to start , worth a good bud hope this helps

[@jimbothethimble]

Hi Mark, new to your videos, finding them a brilliant resource thanks. I have picked up an old speedfight 2 100cc non runner and hope to use your videos to help me get it running. Thank you and keep the vids coming. Kind regards from Glasgow Jim

[@marksavage]

most of them cover 50cc but all the basics are the same and with over 80 videos they should help bud

[@jimbothethimble]

@@marksavage Hi Mark, I have managed to get the starter going, replaced battery, main fuse and relay. Sprayed up some contacts. I am now struggling to get spark. I have changed the spark, but it seems no power is getting to the lead, what power should I be getting into the lead on the 2 tabs that lead onto it? I cannot see the CDI unit beside the battery however the key looks like a thin red one. If I have no power to the lead where am I best to look next? Or do you cover this in a video? Any help appreciated Kind regards Jim Ps I have no power to headlights or dash, but horn indicator and brakes lights are fine

[@jimbothethimble]

@@marksavage This is the key I have for the Speedfight, I am hoping it's not an immobilised one as I may have to change the CDI. Could you have a look and tell me your thoughts. Thanks Jim

[@marksavage]

@@jimbothethimble if you upload a video I'll take a look but as in my videos Its a fat or thin one

[@jimbothethimble]

@@marksavage kzbin.info/www/bejne/n2fIemZpj9eEl7c Apologies forgot to include the link 🤦🏼‍♂️

[@luk1z915]

Hi mark, i have a question about speedfight 2, so on the variator ramp plate there's a cover which i haven't seen in your vids, so it's a restricrion or what? Can i remove it, will something change?

[@marksavage]

Yes it can come off as its q restrictor and doesnt need to be on there Easy to take off and check rollers clean or replace While your there check belt to It will run better bud Thanks for watching loads more helpful videos on my channel

[@luk1z915]

Thanks a lot, i changed the belt to malossi x special, because the old one broke😅 and the difference felt great

[@luk1z915]

Hi again, so i checked my rollers and they are 10g, should i leave them or get the 6g as you recommend? Or try to use both?

[@marksavage]

@@luk1z915 6g mate 10g is way too heavy bud

[@luk1z915]

Will the speed not decrease? Now it goes pretty good 😅. But if you say you know

[@macko83]

Hi Mark, I have Peugeot Vivacity 50cc silver sport from 2004, and have problems with strating especially when the scooter is not running 2-3 days, it won't start with kickStart also, I open the air filter cover the air hole, and it will start and after that it will start every other time, I've cleaned the carburetor, the battery is good, I check the spark plug, clean the exhaust, can it be the electric choke, I didn't replace it or is it something else?

[@marksavage]

They do suffer from this and normally yes its the card Check the fuel/ air lines Replace if hard or loose Overhaul the carb make sure float is OK and gasket They can leak and allow the fuel to disappear and then its too low to start By doing what you are you like priming it so it starts Also check the gasket onto the manifold I've replaced the card before and this sorted it but otherwise try what I've suggested

[@danpullin6610]

Hi Mark quick question have you Hurd of BurlT? They make cylinder kits. Is wondering if there quality make as they seem more expensive than others many Thanks Dan

[@marksavage]

No but you do get what you pay for, as long as it's no chinese cheap it should be ok bud Take care

[@danpullin6610]

@@marksavage yeah I think it's German made its a 150cc kit for a Honda XR 125 push rod MotoR

[@kaitlynwaterfield4087]

Mark I watch all your videos of speedfights I've gotta 100cc Peugeot speed fight 2 I was riding on it the other day and it just died I parked fiddled with the carb and got it running and it got me home but now will not start and now wont give me a spark I have put a new spark but I can smell the petrol but not burning I am going to replace the cdi in next couple of days is it possible that my immobilizer has burnt out,thanks for your time hope to get a reply

[@marksavage]

Its really common for cdi failure bud It is a immobiliser one ? If so is the red light on when you turn it over ? If immobiliser you will have to get a bypass unit If not it's a simple new cdi Thanks for watching bud and hope my videos help

[@kaitlynwaterfield4087]

I'm not sure if the light works as the person before has messed around with wiring,would you recommend just trying new cdi 1st, yeah your videos are very informative

[@SORBETT]

Hi Mark, I have a question, my speedfight 2 70cc bogs when it reaches about 30mph, and i don't know what to do, it's like it's always lean, i jeted it corectly, raised and lowered the needle, it changes nothing, looked for air leakes, there are no air leaks, swaped the spark plug, looked at the crank seals, they look good, checked the vacuum lines, they work propertly, cleaned the whole carb. I ran out of options, don't know what to do, it would be very nice if you could suggest something to try. :)

[@marksavage]

I always fight to answer these bud I hate big bore kits as in my video 70 kits donated them and this is why bud Its hand full to get the right size jet , plug , air filter , tuning and slide And that's if it will keep running and not blow up

[@SORBETT]

Found out that the cylinder overheated

[@marksavage]

@@SORBETT so it's a LC ? Or did you not have the fan engine cover on if AC

[@SORBETT]

It is LC but it somehow overheated

[@marksavage]

@@SORBETT maybe you hadn't got the air out of the system or a water leak or pump not working So have you scored the piston? This can be poor 2t Ir cheap piston ?

[@tonyperks4170]

hi mark i have a peugeot elystar 125 4t i have completley changed all the fuel lins and petcock with new cleaned the carb, i have spark and fuel but still wont start, i have just noticed that the fuel guage is flashing despite a full tank, any thoughts as to why it wont start . thanks for reading

[@marksavage]

Is it efi ? Sounds like cdi fault You say you have a good blue spark and a wet plug ?

[@PMint8]

I'm hoping to get my new shed sorted soon then I'm in business:)

[@marksavage]

I was going to get a bigger one and play with some more peds and bikes bud Enjoy when you get yours

[@jakefoxon1759]

What size jet would you put in a 100cc carb mate tool it off and it has an 86 in there but I have a sports exhaust.. would it be a 92 or 100 jet?

[@marksavage]

try the 92 first and test and tune like in my videos bud

[@jakefoxon1759]

savage thanks mate it's a gurtner carb someone else I spoke to said it might need down jetting a bit but I dont believe that as having trouble starting the bike still!

[@jakefoxon1759]

@@marksavage I have a gurtner carb and dropper s3r exhaust

[@marksavage]

@@jakefoxon1759 too big of jet you will be flooding the carb with fuel and the pot so it will make it harder , too much fuel also can feel like not enough as it pulls back i have videos on up and down jetting and carb setting etc etc type in mark savage and then what your after yes it maybe on another moped but the basics are the same

[@parjayvlogs3732]

Mark got another weird problem with my bike that no one can seem to help with, basically when I rev my moped and let go it doesn’t go back to idle it’s like I’m holding the throttle and the wheel just spins, when riding I have to properly slow down for it to go back to idle ???

[@marksavage]

carb either the carb is pinched or rusty and need freeing up or the slid needle is in wrong ( very common) and not in right , take out test its free and replace in the right way or the needle is bent and not going in the hole also very common bud

[@charlieoscar09]

Thanks for the video Mark well summed up

[@marksavage]

Thanks bud Job done lol Take care

[@brad521]

Put a new barrel on my Aerox 2008 it ran and rode but I put plastics back on now it waint start so I took em back off and it still waint start any idea on what to do to get it running again

[@marksavage]

odd bud , check wiring and make sure you didnt cross any wires

[@josephjordan5445]

Hi mark I have an Italjet formula twin I have a problem that the bike runs and starts fine but when I’m on it and go to ride it has no power. This is an issue that appeared one day and won’t go away. I have change the piston rings as one set on one piston had gone, I have cleaned the carb and mostly replaced all parts, do you think that to rollers, belt or clutch could be my problem?

[@marksavage]

ive often just replaced the piston not just the rings but well worth a look at them as they do cause this problem and its an easy fix bud

[@andy5786]

Hi mark just a question please I thinking of getting a 50 cc scooter first bike I like the Peugeot kissbee is that scooter any good and do there run well mark just want something cheap and reliable thanks love you're videos top draw

[@marksavage]

As long as they have been serviced , valves etc and look after then yes they are easy 4t mopeds so just add fuel and away you go If its had 10 owners every year of its life then leave it bud I love just having a twist and go moped in the summer So easy just to jump on to go out Cheap and fun

[@richardtowell2784]

Hi mark Loving the vids but i need a bit of help as im lost , my vivacity 50 2t is acting weird ..starts fine, good idle, but at full throttle the revs go up and down like im twisting it, everythings standard except for a leo vince,5.5 rollers and 60 main jet..ive tried adjusting the air mix but it doesnt solve it .going to the left makes it unresponsive , goin to the right makes the idle irregular, stays slightly high before returning to normal..seems okay at 3 halfs out but still goes up and down, im stumped..any ideas

[@marksavage]

Check the throttle cable is free and not catching Also not rust , wd40 down the cable as it can happen in the weather Check plug maybe renew and cap is tight and wd40 Then carb off clean and bowl Air and fuel pipes are OK and now gone hard or split 62 64 jet and clean Make sure slide is ok and needle is not bent See how it goes then

[@richardtowell2784]

@@marksavage..will do..thanx mark..

[@mrgadget28]

My piaggio typhoon 2018 50cc 2 stroke wont start and i done a compression test and it had 60psi.Would this be the cause that it wont start.

[@marksavage]

kzbin.info/www/bejne/p4GQf62eoKh_ask

[@mariol1436]

Very very helpful great job mate!! ❤️

[@mastercreative1]

Hi Mark, Whats Kawasaki 125 bikes like ? good reliable ? like the Yamaha's ?

[@marksavage]

Not many about to be honest as kawasaki seem to stick to bigger cc But yes all in like yamaha Still better that the cheaper ones I have loads of 125cc review and fixes Type in 125 mark savage to view them But all in it does come down to budget bud Cheap lexmoto and lots of tlc and they will going

[@MrCoulter32]

Would u have idea why my scooter not start from cold in the morning but if heat the spark plug its start right away

[@marksavage]

Most of the time it's the auto choke if the moped is all standard ! Take it ,it is and you have serviced it

[@MrCoulter32]

Yes I serviced the bike keep it in good condition its just the cold start is the problem but when it runs it runs fine.

[@marksavage]

@@MrCoulter32 then check test or just replace the auto choke bud

[@jaynunns2013]

Hey, my 70cc aerox stopped working so i assumed it blew up so i bought a 50cc and downsized the carb and replaced the spark and woodruff key and its still not starting?

[@marksavage]

oh really bud ok so fitted a 50cc head and piston cleaned up and good compression fitted all new gaskets you have spark and done wet hand test? did it get wet is the plug getting wet often after a overhaul they can play up, you have tried easy start to get it going? air the plug if you are getting a wet plug and try again

[@jaynunns2013]

mark savage ok ive done all this and no luck i have compression also the only thing i can thing off is timing could you maby do a quick 2 minute video on how to do timing?

[@stanr2410]

Hi mark do u do servicing and maintenance on speedfight 2 100cc and where u located sorry to ask

[@marksavage]

I don't bud but I have a play list of 100 videos to help Yes most of 50cc but the basics are the same

[@seifdriouech9008]

i have an oil leak coming from the oil pump on my speedfight 2 i can't find any information on that, i took it out and disassembled it but i cant find where is the fault coming from, can you please give me some insight on what to do

[@marksavage]

It's a new one bud they are not serviceable Try e bay 2nd hand For now I'd pre mix if its leaking too much

[@seifdriouech9008]

@@marksavage thanks alot. i have a speedfight and a trekker, troubleshooting them would've been a nightmare if it wasn't for your videos

[@marksavage]

@@seifdriouech9008 that's good to hear bud that they help

[@sarahbullock8777]

after bit of info, brought a 2006 speed fight 2 50cc air cooled, got no keys was told I could just buy a new ignition barrel n keys which I done but still wont start it turns over just wont start, was told you cant bypass the immobiliser on this model, any info greatly appreciated

[@marksavage]

So its a immobiliser one? There are 2 types Immobiliser which has a fat key and as you dont have it you will have to look beside the battery Watch my cdi video bud it will help As for changing it if it is you will need a bypass unit, on e bay bud

[@sarahbullock8777]

I was told it was immobilized through the oil pump it has a black box beside the battery the last 3 numbers are 500, is it a fixer or scrapper lol thanks for your help we love watching your vids there a great help for my bored teen on lockdown

[@marksavage]

if its beside your battery then its a none immob so ok, however you need to check for spark? then fuel like in my videos do you have both ? it could be a few things as you never heard it running? serviced it? wet hand test? and is the plug getting wet

[@aaronvernon375]

hi @mark savage i was just wondering how many miles dose a fuel tank last in your speedflight 2

[@marksavage]

hi bud ,that's very hard to give you that info as it comes down to many things how good the engine is and serviced how the carb has been set if its standard and how you ride it along with hills etc etc I wish I could give you more but from 50 to 100 miles!!

[@chrissquires8197]

Thank you mate

[@parjayvlogs3732]

Mark please help me out as with the virus I can’t take my bike to any shop so it’s gotta be me to fix it for however how many weeks, basically my Piaggio zip 2 stroke starts and runs normally and after about 10-15 mins of riding it loses power and eventually dies just like that but through all of this there’s was NO bogging it runs fine I need help!!

[@marksavage]

hi bud bike garages are open but happy to give this a go, I had this once and it drove me made and turned out the be the plug!!, well worth buying a new one other wise it could be the stator coil going to earth or even the cdi, sure its not fuel( fuel filter if it has one) but electrical bud otherwise go over all wires and connectors just in case its shorting

[@parjayvlogs3732]

mark savage thanks so much for the reply what you’ve told me is very good but seems out of my reach as I don’t know to much about them but I’m confident to fix this, are you able to explain in a bit more detail what I have to do ? Cheers mark

[@parjayvlogs3732]

mark savage and I’ve recently replaced the plug as well

[@kierenbeeney8951]

Hi mark need a bit of help if u could help me out my bike got stolen and got crashed now bike won't start engine light flashes orange it wants to start but it won't it ticks over but not sure if the problem is caused by the engine light plz could u help me out wiv the engine all the front of the bike got smashed up aswell managed to get it recovered

[@marksavage]

It's never nice getting your bike stolen and to be fair not great to get it back!! You don't know what they did to it ! What bike is it ? What was done to it beside the front panels ? What have you fixed and tried to do to get it running?

[@kierenbeeney8951]

Got it all up and running now worked on it today and 1 plug was out of the rectifier thinks that's the thing that charges the battery so battery kept dying on me every time I tried to start it but can't seem to manage to get the headlight fairing or the side fairing I can get all the other parts but just not those parts it's a Yamaha vity XC125E 2009

[@Sean-cd2em]

The backplate of the variator on my aprilia sr50r wont come off it moves about 10mm forwards and backwards any tips for getting it off as I’ve bent it now trying so it must come off? Thanks in advance

[@marksavage]

that's not good bud but does happen a lot, ok do you or have you got a impact drill?? use a socket to whack on as tight as you can so a little smaller but what ever you can get on and use the drill to get it off and it should come of .make sure its an impact one not just drill or take off the other side and on the startor coil theres a bolt hold that side and whack on the socket and give that a go

[@Sean-cd2em]

Thanks for replying but I mustn’t have explained properly sorry it’s the plate at the very back what the 3 little plastic sliders attach to the plate what holds the rollers in place

[@marksavage]

@@Sean-cd2em oh right so you have the variator off It's the backing plate which you dont need anyway Drill out the 3 screws Or if they are not there? And its stuck Buy a new variator Or just in case your not saying the variator is stuck in the crank ?,,

[@Sean-cd2em]

Yes I have the front part of the variator out what the belt slides up and down and the rollers are out it’s the bowl looking thing at the back what the sliders go on

[@Sean-cd2em]

Yes part of the variator is stuck on the crank

[@garyhiggins4333]

Hi m8 I've got a question about my bike it's a suzuki sixteen 125 and am just wondering do you no where where the indicator relay is cos I can't find it I've Google it and I've got nothing your my last hope if you could much appreciated cheers m8

[@marksavage]

ive not worked on one mate really sorry but you have looked under the clocks , under the front panel or under the seat last place either side of the rear panels but I have had a bike before that the flasher was in the main clock set and they whole thing needed to be replace -not good bud

[@garyhiggins4333]

Cheers m8 I have a go thanks for getting back to me 👍

[@mothertrucker]

What camera do you use to film with and what mic set up?

[@marksavage]

hero 4 and as is, was good edit software but not now, today I get me hero 5 and going to get some edit software

[@mothertrucker]

@@marksavage i use filmora for editing

[@tmaylott6350]

I got moped it pops and dont run properly peugeot ludix snake

[@kieranshaw2775]

Can u please do a cool ped build when u can on a speed fighter or an vesper

[@marksavage]

I did 70 speedfight videos But now with better hero coming I'll find one and do a much better quilty one soon

[@motovlog698]

Great stuff

[@marksavage]

Thanks bud

[@TurfGam3er5]

I have a mbk ovetto 101cc in desperate need of your help !!!

[@marksavage]

Hi bud whats up , it might help you doing a video in detail of your problem and let me know you have uploaded it and I'll give it a go and try and help

[@TurfGam3er5]

@@marksavage well for one its impossible to find parts , but i cannot for the life of me get the starter motor off the bike to replace , managed to replace clutch etc and variator and belt , but my god I put a new battery on and tried to start it but then straight away it gave up like instantly, mate I dont know where your based but I would happily send my number for a little help

[@TurfGam3er5]

@@marksavage I will do a video at some point when I'm at the bike as its at a garage i own, not a mechanics garage my home garage , very strange bike got it for £80 from £300 because I said to the guy it doesn't run why would I pay that amount for it

[@marksavage]

Yea mate pop a video of it Clean carb , new plug, new fuel , air filter Then try again Starter motor should be 2 bolts and wx40 and a wack lol

[@TurfGam3er5]

@@marksavage if I manage to saw two lines into the allen key bolt do you reckon a flat head screw driver to get it out ?

[@rjauto7215]

Love the dog mark I've got two of them 8&6 rottweilers 👍👍👍

[@marksavage]

Shes a bugger at the moment lol but loving her lots

[@marksavage]

Take care and enjoy your doggies

[@rickymullane9973]

that is my cane corso in one anything on floor in her eyes is food

[@marksavage]

Agree lol

[@andy5786]

I not a youngster I over my fifties mark cheers

[@marksavage]

Ha I'm 50 in a few months now Where did the years go lol

[@andy5786]

@@marksavage thank you Mark, very greatful to you.

[@bbb8775]

another ped vid!!

[@marksavage]

I'll get one in bud